Develop Bugs

zenfone2 after root suddenly shutdown and never boot to system

The phone is z00A
Hay i did everything ,and the lineageos is working, but when i want to root . I flashed the supersu then my device is not working its only booting to twrp, i wiped then tried the linage extras , it even didnt work , root checker tells me your phone is not rooted, i found a thread here that uploaded a linageos su silver file uploaded by you, i flashed it, and the system worked , and the rootchecker told me your phone is rooted , after 10 min the phone turned off, and i cant now acees system , when i reboot to system , it rereboot , and then boot to twrp , can you help please??

Unable to enter bootloader AT ALL

DEAR members
So Initially everything was was working well . I used the method to unlock boot loader then flashed magisk and the latest 123 EMUI 9.1 rom
After that I flashed the magisk again
Now I am unable to enter bootloader at all . Not via the power button and volume down method and not by ADB (ADB just says waiting for device)
via hardware buttons to enter boot loader I get the following screen and phone keeps booting again about 2-3 times
Please help
Recovery via volume up button wants me download the emui 9.0 rom which I read I cannot roll back to

I did roll back from emui 9.1 .116 to 9.0

Can u detail how please ?
Thanks

From recovery

Good evening, According to funkyhuawei, Firmware 9.1.1.118 and. 123 are for the mate 20x 5g. That's probably why it crashes ...

jeremy08330 said:
Good evening, According to funkyhuawei, Firmware 9.1.1.118 and. 123 are for the mate 20x 5g. That's probably why it crashes ...
Click to expand...
Click to collapse
Right now i am on 123 with magisk no crashes its butter smooth

Realme 3 RMX1821 Bricked

Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!

You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot

about realme 3 charging overtime error
kprsnt said:
You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot
Click to expand...
Click to collapse
unale to boot into fastboot mode please give me some suggestion please

i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error

realme 3 bricked
Ibno Hamid VI said:
i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error
Click to expand...
Click to collapse
bro tell the name of the tool

my be msmdownload tool

mfahad said:
Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!
Click to expand...
Click to collapse
Go to the Realme services center

boot loop after installing orangefox + disable DM veriety what should i do?

hello, so i'm using xiaomi redmi note 5 pro miui 11, then i install OrangeFox-R10.1_3-Stable-whyred and Disable_Dm-Verity_ForceEncrypt_10.20.2019, after i install both of it and it cause boot loop, then i reinstall the orangefox with the older version because i've seen people using this with no problem, it's OrangeFox-R10.0_1-Stable-whyred, but it's still boot loop, is that because the dm verity is lame?, someone told me to install enable dm varity, is that gonna work?
then i went to service center and they said it can't be flash or hard reset, they told me to go to IC MSC and i don't know what the IC MSC is, is that a hardware or something?, what should i do ? and if it's possible, can it fix without losing my data ? because my data is important for me, please somebody help me...
i'm not a technician
sorry if i'm wrong
sorry if i'm look stupid
i'm new here
hope you guys can give me good responses
thanks

Use twrp and flash magisk on twrp startup, don't use any other app

sindhu123456 said:
hello, so i'm using xiaomi redmi note 5 pro miui 11, then i install OrangeFox-R10.1_3-Stable-whyred and Disable_Dm-Verity_ForceEncrypt_10.20.2019, after i install both of it and it cause boot loop, then i reinstall the orangefox with the older version because i've seen people using this with no problem, it's OrangeFox-R10.0_1-Stable-whyred, but it's still boot loop, is that because the dm verity is lame?, someone told me to install enable dm varity, is that gonna work?
then i went to service center and they said it can't be flash or hard reset, they told me to go to IC MSC and i don't know what the IC MSC is, is that a hardware or something?, what should i do ? and if it's possible, can it fix without losing my data ? because my data is important for me, please somebody help me...
i'm not a technician
sorry if i'm wrong
sorry if i'm look stupid
i'm new here
hope you guys can give me good responses
thanks
Click to expand...
Click to collapse
If you install OrangeFox you don't need to flash any dm-verity or whatsoever zip except rom :laugh:
OrangeFox will install survival automatically. Install OrangeFox and forget is meant to be.
Don't use stupid Dm-sh*t.zip files with OrangeFox !!!
More info : https://forum.xda-developers.com/re...ment/twrp-orangefox-recovery-project-t3837547
Good luck.
Sent from my Galaxy Tab 2 3G using XDA Labs

Can you enter recovery?
Do you encounter a problem when you reboot system from recovery and it show only Mi Logo and after a few second the screen is black and it show again Mi Logo?

Hodaka1999 said:
Can you enter recovery?
Do you encounter a problem when you reboot system from recovery and it show only Mi Logo and after a few second the screen is black and it show again Mi Logo?
Click to expand...
Click to collapse
I have that problem...

S20 5G A12 Odin Magisk Error

Hi there . Trying to root with Magisk s20 5G on Android 12 . After patching boot.img flashing with Odin always gets stuck on modem_debug.bin and error on Download Mode -Only official released binaries are allowed to be flashed (VBMETA) .
Now this was issue also on Android 11 . Never managed to get root installed . Any tips what I'm doing wrong ?
Cheers
EDIT : Setting up time back far and unchecking Auto Update in Dev. Mode flashed finally successfully . Only problem Magisk still has no root .
EDIT 2: : Got root done . In odin uncheck F. Reset option when flashing patched Magisk file . Phone holds root after restarts or when powered done .