Develop Bugs

OP3 - Nethunter - "Unpacking boot image failed"

Hi there,
I wanted to install the latest image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP I keep getting the message : "Unpacking boot image failed" in the log screen.
What I did in order:
- Unlock fastboot mode
- Flash TWRP recovery (found on build.nethunter.com/twrp)
- Reboot on TWRP
- Install kernel ( kernel-nethunter-oneplus3-nougat-3.15.4-20170126-2226 )
- Install ROM ( nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604 )
- Reboot
It is when I install the rom that I get the error message "Unpacking boot image failed". Even if at the end it says "install completed - Success", it keep loading (with the nethunter loading screen) indefinitely...
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.

Aiscargeauh said:
Hi there,
I wanted to install the last image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP (found on build.nethunter.com/twrp) I keep getting the message : "Unpacking boot image failed" in the log screen.
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.
Click to expand...
Click to collapse
What ROM are you using?
Last time i installed it i was on OOS 3.2.2. You have to flash kernel and then the big file (generic nethunter.....)
Found that in https://forum.xda-developers.com/showpost.php?p=68451978&postcount=6
It worked perfectly but since 3.2.2 i havent touched it again so not sure what rom is compatible atm

fuarkgl3 said:
What ROM are you using?
Click to expand...
Click to collapse
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.

Aiscargeauh said:
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.
Click to expand...
Click to collapse
I mean version of OOS, not nethunter overlay. See my screenshot. You have to download one of the following kernels depending if you are on MM or nougat. Flash it before flashing the nethunter overlay

fuarkgl3 said:
I mean version of OOS, not nethunter overlay
Click to expand...
Click to collapse
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.

Aiscargeauh said:
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.
Click to expand...
Click to collapse
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?

fuarkgl3 said:
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?
Click to expand...
Click to collapse
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html

Aiscargeauh said:
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html
Click to expand...
Click to collapse
Got it working. Only problem is i dont find the option to enable OTG-USB lol

fuarkgl3 said:
Got it working. Only problem is i dont find the option to enable OTG-USB lol
Click to expand...
Click to collapse
And I'm here sitting with my error and my infinite boot, lol.
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.

Aiscargeauh said:
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.
Click to expand...
Click to collapse
Sure. Just give me time to post what i did, currently restoring my nandroid because something went wrong when updating metapackages, so im going to download full version instead of minimal and enable OGT-USB to check if wifite works. I will post the steps asap :good:
meanwhile..... how the **** do i enable usb-otg? i dont find the option in settings/storage/3dot
Good and bad news: OTG does not work (it worked for me on MM) but nethunter runs "well" ... it stucks while rebooting and some weird things more. It runs laggy as well...
Steps and config i have
-Experience ROM v10.1(oos 4.0.2 with some adds) and custom TWRP by blu_spark v14
1-Download these 2 files from https://build.nethunter.com/nightly/3.15.4-20170202-1604/
-kernel-nethunter-oneplus3-nougat-3.15.4-20170202-1604.zip
-nethunter-generic-arm64-kalifs-full-rolling-3.15.4-20170202-1604.zip
2-Reboot to recovery and install nethunter-generic-arm64.....
3-Not sure if you have to reboot and then install kernel but i flashed nethunter+kernel without rebooting to system
4-Reboot to system and open supersu, then open nethunter app and grant superuser permissions
5-Done.
I Dont really know why my external adapter or pendrive are not recognized, because it did in MM with same hardware lol. Maybe now only works with official usb-c adapter, who knows

I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?

Aiscargeauh said:
I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?
Click to expand...
Click to collapse
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2

fuarkgl3 said:
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2
Click to expand...
Click to collapse
Do you think flashing another ROM before flashing nh-generic will help ?

Aiscargeauh said:
Do you think flashing another ROM before flashing nh-generic will help ?
Click to expand...
Click to collapse
Dont think so. But latest build i installed NH i didnt use arm64 version but armhf. So maybe try what i did but using custom TWRP by blu_spark v14 and armhf.... im not sure
Tested with 2 antennas and result is the same in both (see SS)

razer phone with pie unofficial

i always keep checking for pie update on my razor phone well i found this but as it aint on xda site im suspicious what u all think
https://www.firmwares.androidinfotech.com/aosp-project-treble-custom-rom/

That is just referring to the fact, that being project treble, we can install generic system images. Pie already runs on our phone, but there aren't any developers (that i have seen at least) working to get pie running for our phone. XDA has a thread about what phones can run the Pie GSI and our phone has been on that list for a long time.

Pie GSI images from
https://forum.xda-developers.com/project-treble
Work alright for me with a few issues like using magisk breaks networking (WiFi, 3g)
I've been playing around with the 8.1 builds and they work great. Pixel experience is by far the best so far.
Just hope razer release pie so we can get an updated kernal that will hopefully fix all the GSI problems on it.

tay200k said:
Pie GSI images from
https://forum.xda-developers.com/project-treble
Work alright for me with a few issues like using magisk breaks networking (WiFi, 3g)
I've been playing around with the 8.1 builds and they work great. Pixel experience is by far the best so far.
Just hope razer release pie so we can get an updated kernal that will hopefully fix all the GSI problems on it.
Click to expand...
Click to collapse
What was your experience with the Pie GSI builds? What, if anything, was broken?
Peace

chris5s said:
What was your experience with the Pie GSI builds? What, if anything, was broken?
Peace
Click to expand...
Click to collapse
Everything Worked that I tried, the only thing I didn't try was NFC.

tay200k said:
Everything Worked that I tried, the only thing I didn't try was NFC.
Click to expand...
Click to collapse
Ok, thanks. One more question, did you flash an a or ab build?
Peace.

chris5s said:
Ok, thanks. One more question, did you flash an a or ab build?
Peace.
Click to expand...
Click to collapse
AB Build.
Flashed factory image booted to OS enabled USB debugging rebooted bootloader booted twrp (don't flash it just boot) flash image via twrp to system wipe data and boot. It will ask for a password on first boot just type stuff until it asks to factory reset do it and allow default recovery to wipe data and after it should boot.
(Sorry rushed this reply as I'm at work)

tay200k said:
AB Build.
Flashed factory image booted to OS enabled USB debugging rebooted bootloader booted twrp (don't flash it just boot) flash image via twrp to system wipe data and boot. It will ask for a password on first boot just type stuff until it asks to factory reset do it and allow default recovery to wipe data and after it should boot.
(Sorry rushed this reply as I'm at work)
Click to expand...
Click to collapse
Is the issue with getting kicked to download mode fixed? Can i reboot multiple times without going into download?

iliais347 said:
Is the issue with getting kicked to download mode fixed? Can i reboot multiple times without going into download?
Click to expand...
Click to collapse
I never had that problem myself so far maybe something to do with the fact I never flash twrp to the device maybe? Not sure.

tay200k said:
I never had that problem myself so far maybe something to do with the fact I never flash twrp to the device maybe? Not sure.
Click to expand...
Click to collapse
Oh so you flash magisk with stock recovery?

iliais347 said:
Oh so you flash magisk with stock recovery?
Click to expand...
Click to collapse
No in the bootloader I just "fastboot boot twrp.img" not flash it so it temporary boots it then flash magisk and don't bother with flashing twrp installer.

iliais347 said:
Oh so you flash magisk with stock recovery?
Click to expand...
Click to collapse
Edit - nevermind, didn't see the answer above
Peace.

tay200k said:
Pie GSI images from
https://forum.xda-developers.com/project-treble
Work alright for me with a few issues like using magisk breaks networking (WiFi, 3g)
I've been playing around with the 8.1 builds and they work great. Pixel experience is by far the best so far.
Just hope razer release pie so we can get an updated kernal that will hopefully fix all the GSI problems on it.
Click to expand...
Click to collapse
Can i know if Bluetooth audio works with u in anyway?

Haithamraid said:
Can i know if Bluetooth audio works with u in anyway?
Click to expand...
Click to collapse
BT Audio works. BT Calls don't.

linuxct said:
BT Audio works. BT Calls don't.
Click to expand...
Click to collapse
In Oreo or Pie? I can't stream audio to a BT speaker in either....
Peace

Project Treble & S10+

So I have spent a bit of time testing out project treble roms, cant get any to boot unfortunately. It might be a twrp thing who at this point knows?
Hopefully some Roms & possibly kernels will pop up In the coming weeks or months
Was worth a try, if anyone has had success with GSI's and getting them to boot, please share your method......:good:

I got my S10E to boot phh's v112 gsi, backlit broken so screen very dim, some other bugs to: some settings and apps crash.
How to:
Make sure you have an exynos version
Have an stock rom installed, bootloader unlocked and rebooted into stock and make sure oem unlocking in greyed out in dev settings.
Install recovery (latest fixed version)
Use multidisabler and format data (https://forum.xda-developers.com/galaxy-s10/development)
Reboot recovery
Install GSI, A/B version
Mount system and use TWRP file explorer to delete rw-system.sh in system/bin
Reboot , may need to press power, volume up and bixby few sec in inital boot.

Successfully flashed ......just transitional animation bug, brightness can't be adjusted....but it's not dim....Pixel Experience Rom.

Pixel Dust ......
Just testing out one more, they both boot fine (Pixel Experience & Pixel Dust). ..
Obviously Fingerprint Scanner is non functional also the same brighteness bug (cannot adjust).
Here are some screens of Pixel Dust.
I'm guessing with a little bit of work these roms will be just fine....:good:
Root also works as it should, as your booting to a rooted system....

Thanks to you both for your testing on GSI roms.
If you report the bugs with logcat to phh telegram group i suppose he will fix it for sure.

NisseGurra said:
I got my S10E to boot phh's v112 gsi, backlit broken so screen very dim, some other bugs to: some settings and apps crash.
How to:
Make sure you have an exynos version
Have an stock rom installed, bootloader unlocked and rebooted into stock and make sure oem unlocking in greyed out in dev settings.
Install recovery (latest fixed version)
Use multidisabler and format data (https://forum.xda-developers.com/galaxy-s10/development)
Reboot recovery
Install GSI, A/B version
Mount system and use TWRP file explorer to delete rw-system.sh in system/bin
Reboot , may need to press power, volume up and bixby few sec in inital boot.
Click to expand...
Click to collapse
So its the A/B not the A only version right?
I was getting bootloops every time i try to install a GSi.

uvitor said:
So its the A/B not the A only version right?
I was getting bootloops every time i try to install a GSi.
Click to expand...
Click to collapse
Yes, s10X uses a/b gsi's

NisseGurra said:
Yes, s10X uses a/b gsi's
Click to expand...
Click to collapse
Thanks. By the way, do we stilll have the magisk after GSi? In other words, as of S10 now have restriction on installation of magisk into system partition and it has to be installed into recovery partition, (the Method using Ian's patched TWRP and Magisk), how GSi interact with root and TWRP?
Thanks in advance.

uvitor said:
Thanks. By the way, do we stilll have the magisk after GSi? In other words, as of S10 now have restriction on installation of magisk into system partition and it has to be installed into recovery partition, (the Method using Ian's patched TWRP and Magisk), how GSi interact with root and TWRP?
Thanks in advance.
Click to expand...
Click to collapse
Gsi do not touch recovery or magisk, maybe needed to patch recovery.img with magisk to be able to boot tho

Duncan1982 said:
Pixel Dust ......
Just testing out one more, they both boot fine (Pixel Experience & Pixel Dust). ..
Obviously Fingerprint Scanner is non functional also the same brighteness bug (cannot adjust).
Here are some screens of Pixel Dust.
I'm guessing with a little bit of work these roms will be just fine....:good:
Root also works as it should, as your booting to a rooted system....
Click to expand...
Click to collapse
You can control thé brightness with modifying a build.prop setting just check the git issue on phh site.
Do you mean with last (fixed ?) twrp, can we power off the phone without bootloop ? [emoji16]

thebigtross said:
You can control thé brightness with modifying a build.prop setting just check the git issue on phh site.
Do you mean with last (fixed ?) twrp, can we power off the phone without bootloop ? [emoji16]
Click to expand...
Click to collapse
Yes booting is fine. Can you link the issue please, i cant seem to find it. Thanks.

sir-harlekin said:
Yes booting is fine. Can you link the issue please, i cant seem to find it. Thanks.
Click to expand...
Click to collapse
+1, i don't think it can be fixed by build.prop.

NisseGurra said:
+1, i don't think it can be fixed by build.prop.
Click to expand...
Click to collapse
Tweak
/sys/class/backlight/panel0-backlight/brightness
/sys/class/leds/lcd-backlight/brightness
Or Try
setprop persist.sys.qcom-brightness 255
And reboot
Or getprop |grep brightness to get value

thebigtross said:
Tweak
/sys/class/backlight/panel0-backlight/brightness
/sys/class/leds/lcd-backlight/brightness
Or Try
setprop persist.sys.qcom-brightness 255
And reboot
Or getprop |grep brightness to get value
Click to expand...
Click to collapse
How do you get root after flash GSI? I used the TWRP(and Magisk) pached by Ian's method and got root on Stock after install the MAgisk Mananger also patched by ian. After flash any GSi, i loose root and im not able to install any magisk manager.

uvitor said:
How do you get root after flash GSI? I used the TWRP(and Magisk) pached by Ian's method and got root on Stock after install the MAgisk Mananger also patched by ian. After flash any GSi, i loose root and im not able to install any magisk manager.
Click to expand...
Click to collapse
Twrp is root, so if you reboot by the method you should be aware of then you'll be booted into a rooted system :good:

uvitor said:
How do you get root after flash GSI? I used the TWRP(and Magisk) pached by Ian's method and got root on Stock after install the MAgisk Mananger also patched by ian. After flash any GSi, i loose root and im not able to install any magisk manager.
Click to expand...
Click to collapse
Flash magisk ou supersu from twrp as usally.
Not the patched or prepatched provided file lol.
Else some aosp roms are prerooted with supersu. They are tagged *-su* in filename

NisseGurra said:
Gsi do not touch recovery or magisk, maybe needed to patch recovery.img with magisk to be able to boot tho
Click to expand...
Click to collapse
does that mean the Snapdragon USA version can try it?
sorry, I am new to rooting

vonDubenshire said:
does that mean the Snapdragon USA version can try it?
sorry, I am new to rooting
Click to expand...
Click to collapse
No, all us snapdragons have locked bootloaders, no root.

In the meantime, is someone running GSI as a daily driver?

sir-harlekin said:
In the meantime, is someone running GSI as a daily driver?
Click to expand...
Click to collapse
I am. BUT there are several bugs to be addressed such:
Not working:
Bluetooh/NFC
Fingerprint
Proximity sensor
Auto brightness (manual does)
MTP
Force closes on any app info in settings
Im using because the progect is very promising and phhusson is open to user's reports so, im trying exactly to do that feedback and speed up the development.

Confused about TWRP

I got the redmi note 8 gingko 4/64 and wanted to ask which TWRP is actually the "best". Installed the "original" and it seems to work fine, but read here and there that the one of mauronofrio is recommended. What would you suggest?

mankokoma said:
I got the redmi note 8 gingko 4/64 and wanted to ask which TWRP is actually the "best". Installed the "original" and it seems to work fine, but read here and there that the one of mauronofrio is recommended. What would you suggest?
Click to expand...
Click to collapse
Follow this guide to see why twrp fails in some cases and the solution to overcome twrp issue.

the_weird_aquarian said:
Follow this guide to see why twrp fails in some cases and the solution to overcome twrp issue.
Click to expand...
Click to collapse
am using orangefox.. does it say why kernel and modules work. but lately i have a flashable zip of ringtones and they dont appear in phone or in folder.
---------- Post added at 09:31 AM ---------- Previous post was at 09:29 AM ----------
mankokoma said:
I got the redmi note 8 gingko 4/64 and wanted to ask which TWRP is actually the "best". Installed the "original" and it seems to work fine, but read here and there that the one of mauronofrio is recommended. What would you suggest?
Click to expand...
Click to collapse
i think original or stock from twrp doesnt have other features example convert partition to f2fs. ect. other have all this. oreangefox have alot of features.

raptorddd said:
am using orangefox.. does it say why kernel and modules work. but lately i have a flashable zip of ringtones and they dont appear in phone or in folder.
Click to expand...
Click to collapse
You mean flashable zip is not shown in internal storage in orangefox menu from where we browse files to flash??

the_weird_aquarian said:
You mean flashable zip is not shown in internal storage in orangefox menu from where we browse files to flash??
Click to expand...
Click to collapse
if i flash kernel it works. if i flash magisk for root it works. i mean you boot into OS and kernel is installed and so is magisk. if i flash a zip that has ringtones they dont install they do not show up in phone ringtones or in folder its like its not placing the files to system partition. but if i use official twrp flashable zips do install and show up in phone.. i have tried both oreangefox and pitchblack both wont flash those zips i mentioned.
seems like something got messed up . i was in rn5 whyred using orange fox.. then magisk 20.2 was released anad orangefox got update.. after that update it didnt install those zips.. then another update was released in a day. and still dont flash those zips. at that time i reverted to the old orangefox i had and that one worked.. so last friday i unlocked bootloader and encounter the same as in whyred orangefox doesnt install the zips i mentioned.
strange that no one has reported already.

raptorddd said:
if i flash kernel it works. if i flash magisk for root it works. i mean you boot into OS and kernel is installed and so is magisk. if i flash a zip that has ringtones they dont install they do not show up in phone ringtones or in folder its like its not placing the files to system partition. but if i use official twrp flashable zips do install and show up in phone.. i have tried both oreangefox and pitchblack both wont flash those zips i mentioned.
seems like something got messed up . i was in rn5 whyred using orange fox.. then magisk 20.2 was released anad orangefox got update.. after that update it didnt install those zips.. then another update was released in a day. and still dont flash those zips. at that time i reverted to the old orangefox i had and that one worked.. so last friday i unlocked bootloader and encounter the same as in whyred orangefox doesnt install the zips i mentioned.
strange that no one has reported already.
Click to expand...
Click to collapse
hmm that seems weird. Did you create the zip yourself or downloaded from somewhere?

the_weird_aquarian said:
hmm that seems weird. Did you create the zip yourself or downloaded from somewhere?
Click to expand...
Click to collapse
created myself. been using for long time. and ginkgo official twrp does place the files in the folder and shows in phone ringtones.. weird very weird,

raptorddd said:
created myself. been using for long time. and ginkgo official twrp does place the files in the folder and shows in phone ringtones.. weird very weird,
Click to expand...
Click to collapse
My experience with self-made (and third party updater-zips) is, that you have to mount the system and vendor partitions manually before you install the updater-zip.
Have you tried this already? For me that's the way it works.

the_weird_aquarian said:
Follow this guide to see why twrp fails in some cases and the solution to overcome twrp issue.
Click to expand...
Click to collapse
I have read your guide very carefully and thanks for that! Don't get me wrong, but has nothing to do with my question. My device is encrypted and yet there has not been any problems with the original TWRP and encryption or something similar.
My question was if there are any known problems or issues with the original TWRP and is it for that reason necessary to change to another one like Orangefox or the one of @mauronofrio?

mankokoma said:
I have read your guide very carefully and thanks for that! Don't get me wrong, but has nothing to do with my question. My device is encrypted and yet there has not been any problems with the original TWRP and encryption or something similar.
My question was if there are any known problems or issues with the original TWRP and is it for that reason necessary to change to another one like Orangefox or the one of @mauronofrio?
Click to expand...
Click to collapse
Hi..if you read the guide then you might know by now the problem with official twrp is the bootloop in decrypted devices..you can't flash miui OTA with twrp...if you're on encrypted device with twrp then you have to flash full rom...other than that official twrp works just fine

mankokoma said:
My experience with self-made (and third party updater-zips) is, that you have to mount the system and vendor partitions manually before you install the updater-zip.
Have you tried this already? For me that's the way it works.
Click to expand...
Click to collapse
right i found that out yesterday after manually mountinf system partition it works.. but in many years ive never had to do it like this. it was just flash zip.

raptorddd said:
right i found that out yesterday after manually mountinf system partition it works.. but in many years ive never had to do it like this. it was just flash zip.
Click to expand...
Click to collapse
yeah, had this never before either until redmi note 5 and now 8
Any idea why you can't switch off the light in TWRP?

mankokoma said:
yeah, had this never before either until redmi note 5 and now 8
Any idea why you can't switch off the light in TWRP?
Click to expand...
Click to collapse
well orangefox on whyred happened after the latest 2 new updates.. then happens in ginkgo.
no none that i tried cant turn the screen off..if all are the same then is a problem that will stay or fix later i do not know. also kernels all are alike in kernel kcal is broken.. no sound control... i feel no big differnece with whyred.

raptorddd said:
well orangefox on whyred happened after the latest 2 new updates.. then happens in ginkgo.
no none that i tried cant turn the screen off..if all are the same then is a problem that will stay or fix later i do not know. also kernels all are alike in kernel kcal is broken.. no sound control... i feel no big differnece with whyred.
Click to expand...
Click to collapse
the only differences were the reasons I bought it: much better Camera and two SIMs plus sdcard... that's it and it feels good.

What you have to wipe for flashing this ROM?
Data, System, Vendor, Cache.
All of them, right?

Kirin GSI Custom ROMs Developments for Huawei

I have found this android 10 Rom for which you are uninterested in the probe on my p20 EML L09 and it works correctly
https://www.haky86.com/kirin-gsi/#Android_100

Does it work with L29? What version of the recovery has to be used?
Thanks in advance for your answer?

Screens?

I can confirm the ROM is working pretty fine !
Flashed via fastboot then I flashed TWRP (downloaded the P20 Pro version from the official TWRP website) and sideload Gapps since touchscreen isn't working

Some screenshots

ectoplasma22 said:
I can confirm the ROM is working pretty fine !
Flashed via fastboot then I flashed TWRP (downloaded the P20 Pro version from the official TWRP website) and sideload Gapps since touchscreen isn't working
Click to expand...
Click to collapse
How have you done to load the gapps?
I don't have twrp, how can I do it?

this rom also works https://sourceforge.net/projects/am...tagOS-10.0.1-arm64-ab-vanilla.img.xz/download

mir2480 said:
this rom also works https://sourceforge.net/projects/am...tagOS-10.0.1-arm64-ab-vanilla.img.xz/download
Click to expand...
Click to collapse
Where did you find that one ? Seems interesting ! Any flashing specifications ? Or juste flash system.img ?
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
mir2480 said:
How have you done to load the gapps?
I don't have twrp, how can I do it?
Click to expand...
Click to collapse
Get the official TWRP app, choose Berkeley as your device and download latest TWRP 3.3.10 I think
Then flash it via fastboot, reboot into recovery by holding volume down while powering up. Plug back into your PC, adb sideload gapps.zip , you might have to adb shell twrp sideload before

ectoplasma22 said:
I can confirm the ROM is working pretty fine !
Flashed via fastboot then I flashed TWRP (downloaded the P20 Pro version from the official TWRP website) and sideload Gapps since touchscreen isn't working
Click to expand...
Click to collapse
re-size system partition to fix it.
edit:
or get the "KSSI" aex 7.x (Kirin Specific System Image) which gapps is fixed there.
https://www.haky86.com/kssi/emui-pie/

haky 86 said:
re-size system partition to fix it.
edit:
or get the "KSSI" aex 7.x (Kirin Specific System Image) which gapps is fixed there.
https://www.haky86.com/kssi/emui-pie/
Click to expand...
Click to collapse
How can I make twrp work? and also how can I make magisk work on a gsi rom with android 10?

haky 86 said:
re-size system partition to fix it.
edit:
or get the "KSSI" aex 7.x (Kirin Specific System Image) which gapps is fixed there.
https://www.haky86.com/kssi/emui-pie/
Click to expand...
Click to collapse
Do you intend to develop more around the P20 or Kirin ? Would love to try new ROMs and I can still run your AEX as daily routine, battery is not as good as emui9 but close and everything is running fine

ectoplasma22 said:
Do you intend to develop more around the P20 or Kirin ? Would love to try new ROMs and I can still run your AEX as daily routine, battery is not as good as emui9 but close and everything is running fine
Click to expand...
Click to collapse
https://sourceforge.net/projects/am...tagOS-10.0.1-arm64-ab-vanilla.img.xz/download
this rom also works!!!

one despises you lot with your unlocked bootloaders phhhfffff

mir2480 said:
How have you done to load the gapps?
I don't have twrp, how can I do it?
Click to expand...
Click to collapse
This rom also works, the arm64 ab: https://www.pling.com/p/1376076/#files-panel . I installed gapps by rooting with magisk then installing weebgapps module. I havent seen a bug yet in this gsi. Get the vanilla version

jackching said:
This rom also works, the arm64 ab: https://www.pling.com/p/1376076/#files-panel . I installed gapps by rooting with magisk then installing weebgapps module. I havent seen a bug yet in this gsi. Get the vanilla version
Click to expand...
Click to collapse
Did you try the gapps version ? I'm downloading it now from official havoc gsi

ectoplasma22 said:
Did you try the gapps version ? I'm downloading it now from official havoc gsi
Click to expand...
Click to collapse
Ya it wont install. The .img has to be smaller then 2.5 or 2.6 GB in order to install on this phone. Something like that

jackching said:
Ya it wont install. The .img has to be smaller then 2.5 or 2.6 GB in order to install on this phone. Something like that
Click to expand...
Click to collapse
How can I increase the partition size to install larger roms?

mir2480 said:
How can I increase the partition size to install larger roms?
Click to expand...
Click to collapse
wipe, advanced wipe, repair or change file system, resize file system, swipe. Thats if you somehow got twrp working on 9.x...

jackching said:
wipe, advanced wipe, repair or change file system, resize file system, swipe. Thats if you somehow got twrp working on 9.x...
Click to expand...
Click to collapse
Using twrp shell could be possible
Did you install magisk with a patched boot.img ? In this case what did you use ?

New KSSI rom, checkout the new link for change log. have fun
https://www.haky86.it/kssi/emui-9-1/