Develop Bugs

[G800F/M/Y][ROM][8.1.0][OPM2] LineageOS 15.1 for G800F/M/Y [Alpha]

This is a LineageOS 15.1 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y).
DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE
Please do not ask for support or ROMs for the G800H. G800F and G800H have nothing in common.
Working features
HW accelerated GUI
Initiate and receive calls
Camera (only photos)
Flash Light
Sound
Fingerprint scanner
Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
Light sensor (needed for auto-brightness)
Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
Wifi
GPS
Bluetooth (A2DP, HFP, HID)
Mobile Data
SMS
MTP storage
USB-OTG (Keyboard, Mouse, USB-Audio)
IR
NFC
Video reproduction is still sometimes a bit buggy on browser (Youtube works fine)
Untested features:
SD-Card as internal storage
Known issues:
USB-OTG (Mass-Storage): detected but the file-system is not usable and will be corrupted afterwards (--> do not connect your USB-stick at the moment)
SELinux not enforcing
Video recording is still buggy/not working (crashes)
Fingerprint scanner can only records 3 fingers and sometimes it could be unresponsive
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Important note: It is possible that flashing this ROM can cause efs partition issues. Therefore it is strongly recommended to make a backup of your efs partition before flashing this ROM. This can be done via TWRP.
Download:
Odin3-v3.07 (it is contained in CF-Auto-Root)
TWRP 3.1.1-0 (.tar.md5 file)
Latest TWRP (.img/.tar file)
LineageOS 15.0 ROM for G800F/M/Y: Android File Host
LineageOS 15.1 Monthly/Weekly updates (@Andrea224): Google Drive
Open GApps (select the variant you prefer, e.g. mini)
Install recovery:
Reboot your device into Download mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select "PDA" (in newer versions: "AP") and select the recovery image (recovery.tar.md5)
Check that only "F. Reset Time" is set. "Auto Reboot" should be disabled to avoid a reboot into stock ROM.
Click on "Start": the recovery image should be flashed now. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, reboot into recovery mode (see instructions below).
Important: make sure not to boot into stock ROM, otherwise the stock ROM might remove the custom recovery again. If this happens, flash the recovery image again.
Flash ROM:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
Make a Backup of your phone (Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM.
Copy GApps and LineageOS ROM zip to your device's internal or external SD card
Connect your device via USB to a PC. You should see the device in the Windows File Explorer now.
If you do not see the device in File Explorer, make sure that MTP is enabled (inside Mounts, click on Enable MTP).
If MTP does not work from recovery, try to copy via MTP by booting your old Android ROM or just remove the external SD card and copy to it directly.
Select one of the two drives (internal or external SD) and copy the files to it.
Do not put the files into the data directory of the internal sd card, otherwise they will be wiped in the next step.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe).
Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the LineageOS ROM zip package
Install the GApps zip package
How to root:
LineageOS does not have root support integrated by default. You have to download addonsu-arm-signed.zip for 14.1 from the Lineageos Extras download page and install it with TWRP.
After that root access is still disabled by default. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest ROM for the G800F you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
24/10/2017:
* Wake on Home button press
* Model string fixed ("G800F" instead of "G800")
* GPS fixed
* Bluetooth fixed
* Update to newest LineageOS sources
* Note: Android 8.0 requires a new TWRP recovery (build from 22/10/2017). otherwise you will not be able to flash the image ("E3004: This package is for device: kminiltexx,kminiltedv,kminilteub,kminilte; this device is .")
10/10/2017:
* telephone calls working
* Camera works (recording videos might still not work)
* LineageOS sources updated
24/09/2017:
* Initial test build
Source:
https://github.com/cm-3470/android_device_samsung_kminilte (Check README.md for build instructions)
Help from other developers is always welcome. Just ask in this thread or PM if you want to help.
Thanks to spookcity138, ayke, mirhciulica, Psyafter and CTXz for working on this ROM.
XDA:DevDB Information
[G800F/M/Y][ROM][8.1.0][OPM2] LineageOS 15.1 for G800F/M/Y [Alpha], ROM for the Samsung Galaxy S5 Mini
Contributors
hennymcc, ayke, Andrea224, spookcity138, mirhciulica, CTXz
Source Code: https://github.com/cm-3470
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version >= 22/10/2015]
Based On: LineageOS
Version Information
Status: Alpha
Created 2017-09-24
Last Updated 2018-07-05

Wow thanks for your amazing work!

I am experiencing random reboots when I lock my device.

oh nice, im testing right now

tibor8 said:
I am experiencing random reboots when I lock my device.
Click to expand...
Click to collapse
Thanks for the info. I was able to reproduce it now. Will be fixed in next build.
RIL will be fixed too.

phone when it locks up in a reset, it does not turn on a constant download, and the wi-fi is on and off after every 5 seconds. Also, there's no way to turn off the backlight of the buttons. Also, I noticed that the connection only lights up H on the seven I'm on H +

wasya78 said:
phone when it locks up in a reset, it does not turn on a constant download, and the wi-fi is on and off after every 5 seconds. Also, there's no way to turn off the backlight of the buttons. Also, I noticed that the connection only lights up H on the seven I'm on H +
Click to expand...
Click to collapse
That means you see the SIM-card now?

yes sim card is seen
---------- Post added at 09:20 AM ---------- Previous post was at 09:17 AM ----------
still noticed that the android 8.0 does not work camera

amazing

wasya78 said:
yes sim card is seen
Click to expand...
Click to collapse
Hallelujah, I'm gonna go get drunk *vodka*

ty best news since your lineage 14 release +++

Hello, is it possible to deactivate this new Slide Menu on Home Screen? To have the old Catapult menu Button back? Or will it be possible in future releases?

There is root inbuild again?
Thanks for development!!

MikeT. said:
There is root inbuild again?
Thanks for development!!
Click to expand...
Click to collapse
No

Sorry my mistake, its the rootmanagment for addonsu in develooer options, now i see it.
Thanks for fast reply

Great! Thanks. Looking forward to next build.

Will these non-working features be updated soon? Because I am using version 14.1 at the moment, and I can't even start the camera... I hope you will either update the previous version or get the camera working in version 15 so I can use that version.

just wanna stop by and tell you that you're awesome, keep up the amazing work!

Jelsie said:
Will these non-working features be updated soon? Because I am using version 14.1 at the moment, and I can't even start the camera... I hope you will either update the previous version or get the camera working in version 15 so I can use that version.
Click to expand...
Click to collapse
At least camera and calls work now. I was abroad for a week so I could not work on it or release a new build.
Maybe there will be a new build next week.

I uploaded a new build with RIL and camera fixed. See opening post for more details.

[Recovery][J710F/FN/GN/MN/K] [Build 3][3.2.3-0] TWRP for j7xelte (Galaxy J7 2016)

Team Win Recovery Project 3.2.3-0
This is for the Exynos SM-J710F, SM-J710FN, SM-J710GN, SM-J710MN, SM-J710K models only!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
Build 3 3.2.3-0
Older builds:
Build 2 3.2.3-0
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://odindownload.com/
FULL STEPS FOR ROOTING
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_(version).zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with Magisk:
Download the latest Magisk.
Without exiting TWRP, transfer the Magisk zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
KNOWN ISSUES
You need to wipe Data when on stock ROM
Changelog
Build 1: Initial release
Build 2: Update to M10 kernel and android-8.1 source (from android-6.0)
Build 3: Fix MTP problems and /vendor (invalid argument) + upstreamed M10 kernel to 3.18.134 with google recommended changes to kernel
NOTE: If you're on stock Oreo rom always make sure your system is read only. Don't let it be r/w
SOURCE CODE:
TWRP (android-9.0)
Device tree (android-8.1)
Kernel: (pie)

why is not on the official web?
idk this seems pretty sketchy

M4T145 said:
why is not on the official web?
idk this seems pretty sketchy
Click to expand...
Click to collapse
I can't instantly get official i can upload pictures btw

Is it support Android 8.1.0 Firmware?

TRalperenTR said:
Is it support Android 8.1.0 Firmware?
Click to expand...
Click to collapse
Yes but make sure you leave system read only and flash magisk instantly to fix dm verify

Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.

TRalperenTR said:
Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.
Click to expand...
Click to collapse
I don't know. Its a twrp bug maybe. Also download it again i built it using the M10 kernel now but it also says /vendor invalid argument

...

It is working fine checked it

This TWRP doesn't install Oxygen Kernel. It says "Recovery Busybox Setup Failed."

I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14

Sulltan Mehmood said:
I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14
Click to expand...
Click to collapse
3.18.135 newer then 3.18.14
If you have other twrp extract the .tar archive and move .img to phone and goto Install on twrp select Install Image and Click on it. Select recovery and swipe to confirm. Done

Hi, the link of the latest build is down, can you re-upload please?

I saw in other tutorials that when in stock 8.1 rom you need to erase all data from internal memory. If i do this, there is no longer a, /system folder so there is no rom and bootloop happens.
Do i need to do factory wipe instead? I know i have to wipe data because Its encripted and twrp cant access internal memory.
Im asking what kind of "wipe data" i need to do

just format data to decrypt
link please

bro it says download file does not exist on google drive

download link ??

https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS
---------- Post added at 17:28 ---------- Previous post was at 17:28 ----------
saquib996 said:
bro it says download file does not exist on google drive
Click to expand...
Click to collapse
Ofogh said:
download link ??
Click to expand...
Click to collapse
https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS

[ROM]exTHmUI 12 (SGSI) for Mi 5

Hello everyone, today I'm here to share exTHmUI 12 (SGSI) with you!
It is Android 12.0
I am not responsible for any damage or malfunctions!
If you need Google Apps, you can flash GAPPS.
IMPORTANT THINGS:
- You must install follow my tutorial.
Here's the instruction to install it on your device:
1- Download all things from here.
2- Reboot to recovery.
3- Wipe - Swipe to Factory Reset.
4- Flash makemesar.zip.
5- Flash exthm-12.0-20220118-SGSI-gemini.zip.
6- Flash patch3.zip.
7- Wipe - Format Data
8- Reboot and enjoy exTHmUI 12
Bugs:
- Not long tested, you tell me.
Thanks:
PdyLZY
unkl933
Kernel Source: https://github.com/crdroidandroid/android_kernel_xiaomi_msm8996
If you want to tell me something like bugs, you should take your error log and find me on Telegram or Coolapk(Chinese Users).
Troubleshooting any problem without the error log is like driving with your eyes closed.
Screenshot:

Camera not working, and can't connect to any Wi-Fi o(╥﹏╥)o

銀河鉄道の鬼鬼ちゃん said:
Camera not working, and can't connect to any Wi-Fi o(╥﹏╥)o
Click to expand...
Click to collapse
WiFi please do not use DHCP connection, please choose static IP connect

You can’t use physical buttons to navigate (┯_┯) and the boot animation is white. Turning on the phone in the middle of the night is easy to blind your eyes

[ALPHA][ROM][R] LineageOS 18.1 for J7 Pro

Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Hey Guys! My name is batuhan, after a long hardwork i builded LineageOS-18.1 so that's first Android 11 build for J7 Pro (j7y17lte) and in beta stage, so its not for daily use.
Spoiler: Bugs
-eng build permissive
Audio Completely Broken
Bluetooth
Spoiler: How To Flash?
LineageOS needs custom recovery for flash, if you have skip to step 5.
Step1: enable developer options;
Go to settings>device info> software information and click build number 7 times.
Step 2: enable USB-Debugging & USB Debugging
Go to developer options and enable USB-Debugging And OEM Unlock
Step 3: reboot your phone to download mode.
Shut down your phone and press power + volume down + home button same button and wait download mode confirmation screen if it here, accept it.
Step 4: flash TWRP
Download Odin to your computer and connect your phone using usb-cable, and select your TWRP file and flash using AP option (don't forgot the disable auto-reboot option)
Step 5: Flash Repartition Script.
NOTE: THAT ERASES YOUR ALL DATA (APPS, FILES, CONTACTS ETC.) Flash OrangeFox Recovery for use repartition script
Download repartition script from Here
Step 6: Fix partitions
Go to manage partitions settings on orangefox recovery and change file system first ext2 after ext4
Step 7: flash LineageOS
Click folder icon on orangefox and select Downloaded LineageOS file and confirm flash
Step 8: reboot and done
After finish flash, reboot your phone and complete the setup.
Download: Here
Thanks;
Gonic For helping
Flominator. for helping
All Exynos7870 GitHub org. Members who helped to trees
All my testers group for motivating and testing it
Sources:
ROM: https://github.com/LineageOS/
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 11
ROM Kernel: Linux 3.18

Congrats on building it

Good job. Congratulations. But there is still work to be done to be able to use it for daily work. I have tried it and I think it is good and once the bugs are fixed it will be usable.

lord_stoner said:
Good job. Congratulations. But there is still work to be done to be able to use it for daily work. I have tried it and I think it is good and once the bugs are fixed it will be usable.
Click to expand...
Click to collapse
any bug ?

Batuhantrkgl said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Hey Guys! My name is batuhan, after a long hardwork i builded LineageOS-18.1 so that's first Android 11 build for J7 Pro (j7y17lte) and in beta stage, so its not for daily use.
Spoiler: Bugs
-eng build permissive
Audio Completely Broken
Bluetooth
Spoiler: How To Flash?
LineageOS needs custom recovery for flash, if you have skip to step 5.
Step1: enable developer options;
Go to settings>device info> software information and click build number 7 times.
Step 2: enable USB-Debugging & USB Debugging
Go to developer options and enable USB-Debugging And OEM Unlock
Step 3: reboot your phone to download mode.
Shut down your phone and press power + volume down + home button same button and wait download mode confirmation screen if it here, accept it.
Step 4: flash TWRP
Download Odin to your computer and connect your phone using usb-cable, and select your TWRP file and flash using AP option (don't forgot the disable auto-reboot option)
Step 5: Flash Repartition Script.
NOTE: THAT ERASES YOUR ALL DATA (APPS, FILES, CONTACTS ETC.) Flash OrangeFox Recovery for use repartition script
Download repartition script from Here
Step 6: Fix partitions
Go to manage partitions settings on orangefox recovery and change file system first ext2 after ext4
Step 7: flash LineageOS
Click folder icon on orangefox and select Downloaded LineageOS file and confirm flash
Step 8: reboot and done
After finish flash, reboot your phone and complete the setup.
Download: Here
Thanks;
Gonic For helping
Flominator. for helping
All Exynos7870 GitHub org. Members who helped to trees
All my testers group for motivating and testing it
Sources:
ROM: https://github.com/LineageOS/
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 11
ROM Kernel: Linux 3.18
Click to expand...
Click to collapse
It means Go to manage partitions settings on orangefox recovery and change file system first ext2 after ext4 ?

[LIST][Q] List of Roms made for Exynos7870

Note: Updateable Post
Note 2: Just Builds made by Batuhantrkgl added. check XDA for others
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Spoiler: How To Flash?
LineageOS needs custom recovery for flash, if you have skip to step 5.
Step1: enable developer options;
Go to settings>device info> software information and click build number 7 times.
Step 2: enable USB-Debugging & USB Debugging
Go to developer options and enable USB-Debugging And OEM Unlock
Step 3: reboot your phone to download mode.
Shut down your phone and press power + volume down + home button same button and wait download mode confirmation screen if it here, accept it.
Step 4: flash TWRP
Download Odin to your computer and connect your phone using usb-cable, and select your TWRP file and flash using AP option (don't forgot the disable auto-reboot option)
Step 5: Flash Repartition Script.
NOTE: THAT ERASES YOUR ALL DATA (APPS, FILES, CONTACTS ETC.) Flash OrangeFox Recovery for use repartition script
Download repartition script from Here
Step 6: Fix partitions
Go to manage partitions settings on orangefox recovery and change file system first ext2 after ext4
Step 7: flash LineageOS
Click folder icon on orangefox and select Downloaded LineageOS file and confirm flash
Step 8: reboot and done
After finish flash, reboot your phone and complete the setup.
Rom List (Links goes to Telegram):
Project Sakura Android 10 [UNOFFICAL]
MintOS Android 10 [UNOFFICAl]
Arrow 10 [UNOFFICAL]
Lightning Fast ROM-17.1 (Android 10) [OFFICAL]
POSP v3.2.2+18 (Android 10) [UNOFFICAL]
Pixel Experince Android 10 [UNOFFICAL]
KeepQassa v2.1 (Android 10) [OFFICAL]
AOSIP Android 10 [UNOFFICAL]
AlrightOS v0.2 (Android 10) [OFFICAL]
AlrightOS v0.4 (Android 10) [OFFICAL]
Thanks:
Gonic and Astrako For Trees.
Ken Mosq for Server
Sources:
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18