Help! Accidently bricked - Moto G6 Play Questions & Answers

Hi Everyone
You'll probably guess from what I'm about to say that I should have researched better, but here is where I am, and hopefully, you can help. I was trying to upgrade my Moto G6 Play XT1922-9 to LineageOS 18.1. I was able to install TWRP, but I kept getting an error bad key and couldn't load data folder or wipe it. So after doing a bit of searching, I came across a fix that ultimately bricked my device, no-verity-opt-encrypt zip. Now even when I go into Recovery mode, I can't wipe to factory default. I tried loading the lineageOS 18.1 unofficial, but it says the zip failed verification; I've tried downloading it multiple times from different browsers to no avail, and I load it off of an SD Card as ADB sideload doesn't work. Any suggestions for help would be great as I am plum out of ideas.

So I ended up reloading the stock rom with the app Rescue_and_Smart_Assistant_v6.2.1.9_prod_setup from Motorola in Windows, kinda hoped there was a Linux version but it didn't work under Wine, so needed to get virtual box in on the action. I guess at least I'm back to square one and can try and get TWRP running again, oh well

was able to reload TWRP and then only able to load LineageOS 18.1 Lite, ended up wiping advanced the data folder to ext2fs and back to ext4 for it to work, including load Mind the Gapps

The strange thing, though was that it only loaded the arm Mapps, not arm64, and lineageOS Lite 18.1 rotation isn't working correctly, and only sound comes out the headphones, not speakers, tried it with PixelOS 2.1 got the same problems, tried loading the full version of LineageOS 18.1 but it kept rebooting and trying to run Decrypt in TWRP got the builds off of Telegram
everything works fine with the stock ROM

now any version of TWRP I use won't allow me to change the filesystem to ext2 and then back to ext4 so I can wipe the /data folder, not sure what I'm doing differently or if the many rebuilds I've made of the original ROM is choking the device

i got it working again, not sure if it was because I wiped my stock build with TWRP and then rebooted back into the stock or because I changed the file system to ext2 then back to ext4fs and then formated and checked to see if it was mounted from the command line or what but I was able to flash lineage lite with mapps arm64

I also got the sound working thanks to
ianos21​with his telegram suggestion, to copy
mixer_paths.xml
audio_platform_info.xml
although I didn't know that TWRP had a file manager and was able to copy the files to the vendor/etc folder from my sd card
now I just need to figure out what's up with the rotation and sometimes the keyboard wonks out

now the vendor/etc folder is missing from multiple ROMs, I just don't get it??!?! how is this happening, I can't tell if I'm having a memento moment or if it's my phone? Has anyone ever had that problem? as in the folders suddenly disappear?

Related

[Q] help recovering with TWRP after failed ROM flash

I've found myself stuck trying to flash a ROM. I'm a newbie, this was my first attempt at something like this, I though I read enough about the process but I guess I screwed up something. I will try to be to the point.
Phone: Samsung Galaxy S3 AT&T i747
Rooted phone with Casual, installed ROM Toolbox and purchased the pro upgrade.
installed TWRP 2.5 and made a nandroid backup, the only place this backup existed was in internal storage.
used ROM toolbox to backup user apps and user data
selected cyanogenmod 10.1 RC5 from within ROM Toolbox and there was a requester for gapps and a checked the box for that also. When the DL was complete I installed the ROM queue with those two items and I checked the boxes Wipe Data & Cache and Wipe dalvic-cache.
Phone went to recovery mode (i guess) and appeared to clear the memory and load the new rom, the phone rebooted and I got the cyanogenmod boot screen but then it went to a requester saying:
Unfortunately , the process com.google.process.gapps has stopped.
When you hit ok you get:
Unfortunately, setup wizard has stopped.
this requester never goes away, just keeps popping up when you hit ok.
So I removed the battery and booted the phone in recovery mode and try to restore but the restore nandroid file in not shown. If I hit the center button in the restore window it says "updating partition details" but never returns.
Whenever you power it up normally now you end up in this gapps loop.
My searching suggested I may have tried to install the wrong version of google apps somehow. What are my options for trying to recover from this? Does my backup still exist somewhere?
If process.gapps is your only warning you can try to reflash the gapps zip from here. http://goo.im/gapps/gapps-jb-20130301-signed.zip If this does not fix your problem, you will have to head deeper into the rabbit hold
You can look for your back with a file explorer. Should be in sdcard/TWRP/BACKUPS/******** (random number). If you dont see them here, check your ext-sd in the same location. If you don't see them, they are gone. Do a Nandroid backup now just to be sure you have one. You should chose to back it up to external in TWRP. As for your FC problem, it would appear that you have not wiped fully. You will likely need to factory reset. the problem is this will remove everything. Titanium back up is a great product for situations like this. If you have used it, you can transfer your backup from the internal storage while connected to your pc. Also copy your DCIM folder as it will contain your photos. This is why you will need to do another Nandroid, because worst case scenario, you can just restore this one.
Thanks for the reply. I will try to reflash the gapps file from the external as soon I can download it, the site is having some trouble right now. I made another Nandroid of the phones current state and stored it to external. I did also have Titanium backup and had backups of the whole system with it. Unfortunately they are also only on the internal storage.
Re-installing the gapps zip file off the extSD from within TWRP did the trick. All the data and backups I created are also still there and are now backed up in several places.
Something that compounded the problem was the 64GB sd card I have for the phone. I was not able to mount it on either of my linux mint machines or an XP machine. Some oddness with the exFAT file system on it, I used a 4GB card I had laying around and it worked fine.
Thank you for the help, the phone is now running CM which is what I wanted and I learned a few things too.
theaxis695 said:
Re-installing the gapps zip file off the extSD from within TWRP did the trick. All the data and backups I created are also still there and are now backed up in several places.
Something that compounded the problem was the 64GB sd card I have for the phone. I was not able to mount it on either of my linux mint machines or an XP machine. Some oddness with the exFAT file system on it, I used a 4GB card I had laying around and it worked fine.
Thank you for the help, the phone is now running CM which is what I wanted and I learned a few things too.
Click to expand...
Click to collapse
I just bought a 64GB card as well. You may be having troubles mounting it due to a partition that comes factory in the SD. If this is the case, you can look at post #57 on the following page http://forum.xda-developers.com/showthread.php?t=1915385&page=6
It helped me tremendously.

[SOLVED] Phone Encrypted - can't decrypt, can't mount internal storage, can't ODIN

Let me first apologize for all of the information, but I wanted to give you guys as much to go on as possible.
TLDWR - Can't flash roms, can't decrypt phone, can't wipe data, can't mount internal storage, can't use ODIN....where next?
Here is what I got:
SPH-L710
Android vers - 4.2.2
Cyanogenmod vers - 10.1.0-d2spr
Was getting flaky reception when I was on 10.0.0 nightly, decided to update to 10.1.2. Downloaded the the required files through Rom Manager, rebooted into CWM Recovery version 6.0.3.1 (non-touch) and did the install (dirty)....booted up and the ROM itself worked, but all my apps were getting "stopped unexpectedly". I figured, ok, did a dirty update so stuff isn't working; I'll redo it and this time wipe everything (after backup of course). When I went to do this, I noticed that it did not mount my sdcard (internal storage, not external sd card). I thought was odd, tried manually mounting, didn't work, tried rebooting recovery and that didn't work. Thought maybe it was a fluke, tried wiping and reflashing 4.2.2 (CM 10.1.2).....it went very quickly. Rebooted, and all of my stuff is gone, which is good, but now it won't let me restore apps.
At this point, I decided I'd had enough of trying to upgrade, so I decided to downgrade back to my old CM 10.0.0....long story short, the flash went quickly, booted up, things worked, but still had the same problem with the apps. I could see the data on the internal storage when the phone was booted, but it never saw it in recovery mode. After doing some reading, I saw where the filesystem changed when going to 4.2.2 so that you can use the new profiles feature. This seems to be what caused CWM Recovery to not see my internal storage anymore.
I thought well, maybe it's because I am back on 10.0.0, so I tried downloading and flashing 10.1.0. It did the same quick flash and showed after boot that I was running on 10.1.0, but I still couldn't mount internal storage (sdcard) in Recovery. I said screw it, reinstalled my apps and decided to truck on with how it was. Short version here - installed mobileiron and touchdown, ran through the encryption in mobileiron, etc etc...mobileiron didn't recognize touchdown and I could not get LEAP for wifi to work.
Decided I would try to decrypt and completely wipe phone. Removed Mobileiron as administrator, tried to decrypt - could not. Tried tweaking security settings, reboots, adb mount and format - all to no avail. Tried wiping in recovery....this failed because it cannot read my storage (because it can't mount it and it is now encrypted)!
With the phone booted up and running adb shell, I can get to the main file system, but my sdcard, data, data/media directories all look empty. I can't mount sdcard through ADB either.
When all of this failed, I looked to ODIN to fix my woes...no luck here either. Downloaded the stock Sprint ROM (4.1.1 L710VPBLJ7 L710SPRBLJ7 ) and tried flashing it but I get hung up on the "Setup Connection"...in ODIN. I have tried multiple drivers, usb ports, battery pulls, etc...I even tried from another PC.
I know this is a lot of information and I apologize again. If you read through all that, thanks for being thorough...if not, I will answer your questions, but hopefully won't have to repeat a bunch of info again.
My end all questions are - where do I go from here? What other options do I have? Is there any repair place I might be able to take this to that they might be able to decrypt/flash the phone to stock for me?
Thanks in advance,
dwnocturnal
dwnocturnal said:
Let me first apologize for all of the information, but I wanted to give you guys as much to go on as possible.
TLDWR - Can't flash roms, can't decrypt phone, can't wipe data, can't mount internal storage, can't use ODIN....where next?
Here is what I got:
SPH-L710
Android vers - 4.2.2
Cyanogenmod vers - 10.1.0-d2spr
Was getting flaky reception when I was on 10.0.0 nightly, decided to update to 10.1.2. Downloaded the the required files through Rom Manager, rebooted into CWM Recovery version 6.0.3.1 (non-touch) and did the install (dirty)....booted up and the ROM itself worked, but all my apps were getting "stopped unexpectedly". I figured, ok, did a dirty update so stuff isn't working; I'll redo it and this time wipe everything (after backup of course). When I went to do this, I noticed that it did not mount my sdcard (internal storage, not external sd card). I thought was odd, tried manually mounting, didn't work, tried rebooting recovery and that didn't work. Thought maybe it was a fluke, tried wiping and reflashing 4.2.2 (CM 10.1.2).....it went very quickly. Rebooted, and all of my stuff is gone, which is good, but now it won't let me restore apps.
At this point, I decided I'd had enough of trying to upgrade, so I decided to downgrade back to my old CM 10.0.0....long story short, the flash went quickly, booted up, things worked, but still had the same problem with the apps. I could see the data on the internal storage when the phone was booted, but it never saw it in recovery mode. After doing some reading, I saw where the filesystem changed when going to 4.2.2 so that you can use the new profiles feature. This seems to be what caused CWM Recovery to not see my internal storage anymore.
I thought well, maybe it's because I am back on 10.0.0, so I tried downloading and flashing 10.1.0. It did the same quick flash and showed after boot that I was running on 10.1.0, but I still couldn't mount internal storage (sdcard) in Recovery. I said screw it, reinstalled my apps and decided to truck on with how it was. Short version here - installed mobileiron and touchdown, ran through the encryption in mobileiron, etc etc...mobileiron didn't recognize touchdown and I could not get LEAP for wifi to work.
Decided I would try to decrypt and completely wipe phone. Removed Mobileiron as administrator, tried to decrypt - could not. Tried tweaking security settings, reboots, adb mount and format - all to no avail. Tried wiping in recovery....this failed because it cannot read my storage (because it can't mount it and it is now encrypted)!
With the phone booted up and running adb shell, I can get to the main file system, but my sdcard, data, data/media directories all look empty. I can't mount sdcard through ADB either.
When all of this failed, I looked to ODIN to fix my woes...no luck here either. Downloaded the stock Sprint ROM (4.1.1 L710VPBLJ7 L710SPRBLJ7 ) and tried flashing it but I get hung up on the "Setup Connection"...in ODIN. I have tried multiple drivers, usb ports, battery pulls, etc...I even tried from another PC.
I know this is a lot of information and I apologize again. If you read through all that, thanks for being thorough...if not, I will answer your questions, but hopefully won't have to repeat a bunch of info again.
My end all questions are - where do I go from here? What other options do I have? Is there any repair place I might be able to take this to that they might be able to decrypt/flash the phone to stock for me?
Thanks in advance,
dwnocturnal
Click to expand...
Click to collapse
Where did you download your stock Rom from? Did you FULLY uninstall drivers from Windows, before reinstalling?
Sent from my hybrid GS3
joeyhdownsouth said:
Where did you download your stock Rom from? Did you FULLY uninstall drivers from Windows, before reinstalling?
Sent from my hybrid GS3
Click to expand...
Click to collapse
I got the link to the stock stuff through ODIN from here:
http://forum.xda-developers.com/showthread.php?t=2189539
Missed your other question the first time I read your post....Yes, I uninstalled the drivers, rebooted, reinstalled the drivers. Tried connecting on another PC as well.
Ok, little bit of an update.
I went through Recovery and was messing around trying to mount and wipe...I couldn't mount data or sdcard, so I figured I couldn't just format them either. WRONG! I was able to format /data and /data/media, which then let me mount /data. After doing this, I rebooted recovery and I could mount sdcard...so I did and formatted it.
Now, I had my old version of CM 10.0.0 on my external sd card, so I installed that and booted up...WOOT - back to blank CM 10.0.0!
Now I've got all my data and apps saved to a folder on my PC, if I can just figure out a way to put them back on the phones storage and restore from my backup...
dwnocturnal said:
Ok, little bit of an update.
I went through Recovery and was messing around trying to mount and wipe...I couldn't mount data or sdcard, so I figured I couldn't just format them either. WRONG! I was able to format /data and /data/media, which then let me mount /data. After doing this, I rebooted recovery and I could mount sdcard...so I did and formatted it.
Now, I had my old version of CM 10.0.0 on my external sd card, so I installed that and booted up...WOOT - back to blank CM 10.0.0!
Now I've got all my data and apps saved to a folder on my PC, if I can just figure out a way to put them back on the phones storage and restore from my backup...
Click to expand...
Click to collapse
It's sounds as if you should start a totally clean install, then backup your downloaded apps with Titanium Backup after you get ROM setup again.
Sent from my hybrid GS3
Another update:
I couldn't get my backup to restore correctly....I kept getting an error restoring /data. Luckily I had an older backup from several months further and was able to restore that. After doing so, I had to remove my google accounts, readd them, and reinstall my mobile iron client for work and I am now good to go!
Man, that was a nightmare.....thought I had soft-bricked my phone.
How do I mark this thread as solved now?
dwnocturnal said:
Another update:
I couldn't get my backup to restore correctly....I kept getting an error restoring /data. Luckily I had an older backup from several months further and was able to restore that. After doing so, I had to remove my google accounts, readd them, and reinstall my mobile iron client for work and I am now good to go!
Man, that was a nightmare.....thought I had soft-bricked my phone.
How do I mark this thread as solved now?
Click to expand...
Click to collapse
Hit the edit/delete button under the original post, type [SOLVED] before your title. Then click the save button.
Worked!! Thanks.
dwnocturnal said:
Ok, little bit of an update.
I went through Recovery and was messing around trying to mount and wipe...I couldn't mount data or sdcard, so I figured I couldn't just format them either. WRONG! I was able to format /data and /data/media, which then let me mount /data. After doing this, I rebooted recovery and I could mount sdcard...so I did and formatted it.
Now, I had my old version of CM 10.0.0 on my external sd card, so I installed that and booted up...WOOT - back to blank CM 10.0.0!
Now I've got all my data and apps saved to a folder on my PC, if I can just figure out a way to put them back on the phones storage and restore from my backup...
Click to expand...
Click to collapse
It worked. Thans. It looks like this is the only solution!!! I wonder why the OS does not let people decrypt the phone......
Same Issue
demax123 said:
It worked. Thans. It looks like this is the only solution!!! I wonder why the OS does not let people decrypt the phone......
Click to expand...
Click to collapse
Unfortunately I do have the same issue. The problem is I have not backed this up previously. Any suggestions?

Question about using TWRP recovery with GT-N5110

I put TWRP on it and can boot to recovery. However, it fails flashing the Cyanogenmod zip because (it says) you need to wipe the device due to an incompatible device layout. So I tried that and naturally it wiped the zip off the /sdcard. Then I mounted the sdcard from TWRP but I couldn't write to it from my computer. (I could see the now-empty drive.) So I said what the heck and rebooted the system and had a like-new device.
I had backed that up before I did anything. So transferred another copy of the cyanogemod zip to the tablet, rebooted to TWRP and tried to install it again. Still no luck. I then transferred my backup to my tablet and restored the backup so I'm back where I started.
Is there another way I haven't thought of?
I put 12 on my n5110 before I found slim rom 4.4.4. Had no trouble with the install of either one. Have you tried putting the cm zip on the external sd card and installing from that using twrp? I also think you can use either Odin or adb but as I recall the methodology will be different. Lots of people with a lot more experience here maybe someone else has some suggestions as well.
Regards
Expat

Startup wizard crashes when booting LineageOS

I went through a lot of trouble to update my OP3 to OOS 4.1.1 with the hope of installing LineageOS, only to have a new problem with the LOS start-up wizard. I tried reinstalling and wiping the entire system except for internal storage, but it doesn't help.
Also, I have a question about back-ups. When I was trying this originally, I made a backup of my system with TWRP. When the original instilation failed, I tried to recover it and it was a broken install (no keyboard to enter PIN). Is there any fool-proof method of backing up a phone without having to rely on TWRP? I'm talking about a complete image that can be flashed on the phone, firmware and everything. I have a lot of storage on my computer, so it wouldn't be a problem to hold one or two 10GB backups.

Updating from CyanogenMod

Hi,
currently I am running CyanogenMod 13 on my Samsung Galaxy S4 Mini (serranoltexx). Now, as it get's outdated and insecure, I am about to update it to LineageOS. But I am worried, because I can't just flash the ROM over CM, but I have to wipe everything. Sure, I can take backups of all my data, but my question is:
What do I have to select in Clockworkmod Recovery in order to clean up for LineageOS? And the second point is that I parted my SD-Card to use Android's option to emulate one partition as internal storage. So if I wipe, can I keep the partitions and what do I have to save before?
Oh and.. I have tried to do a Nandroid Backup, but I can't copy it onto my PC because the storage is mounted differently within CyanogenMod (the 2 partitions I wrote about) and ADB doesn't work for this either.
I hope somebody can help me
Done! /ReqClose
Hi,
I'm glad to say that I have done it yesterday. The thread can be closed and for all who have the same questions I had:
First of all I took a backup of all my data (Apps, Music, Photos etc) and put LineageOS, GApps & SuperSU on my SD-Card. Then I booted into my recovery (CWM) and wiped all data. Unfortunately it didn't work (CWM said something like "error in lineageos.zip") so I decided to use TWRP for it. There was just an unofficial build but I didn't care too much, so I used this one. It was an img file, so I needed to convert it to .tar.md5 first using a tool I found in the Internet. So I flashed TWRP then using Odin. When I booted into TWRP everything seemed to work, but when I tried to install the zip file it just rebooted immediately without an installation. So I finally used ADB sideload, and it finally worked! Now my phone is working fine!
Hope this helps someone!!

Categories

Resources