Related
hello friends. i flashed tethered cyanogen mod 11 with bumped twrp recovery. dont know what happened. the installation was smooth. however after i wished to flash another custom rom i couldnt get into recovery. it gave me oot sector verify secure boot error. i tried download mode to flash stock with lg flash tool 2014. but it is also not detecting the device in any com41.. adv is detecte but nothing else. i researched and could make it that i accidentaly deleted my "laf" partition. so i need a link to any guide of how to restore that.
thanks all. but in need of help :crying::crying::crying::crying:
[email protected] said:
hello friends. i flashed tethered cyanogen mod 11 with bumped twrp recovery. dont know what happened. the installation was smooth. however after i wished to flash another custom rom i couldnt get into recovery. it gave me oot sector verify secure boot error. i tried download mode to flash stock with lg flash tool 2014. but it is also not detecting the device in any com41.. adv is detecte but nothing else. i researched and could make it that i accidentaly deleted my "laf" partition. so i need a link to any guide of how to restore that.
thanks all. but in need of help :crying::crying::crying::crying:
Click to expand...
Click to collapse
I think you flashed the boot.img instead of just booting it. have you tried doing the button thing to get into recovery
powerdown(pull out battery)
press and hold volume- and power untill you see the lg logo, then release and press and hold volume- and power, then chose yes and yes(with volume+, volume - and the power button) and you should be in twrp
Yeah tried the button combo. But instead of twrp or factory reset it gives boot certification error. Secure boot verify.
same thing what did you do to fix this??
[email protected] said:
Yeah tried the button combo. But instead of twrp or factory reset it gives boot certification error. Secure boot verify.
Click to expand...
Click to collapse
markslo112 said:
same thing what did you do to fix this??
Click to expand...
Click to collapse
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
suljo94 said:
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
Click to expand...
Click to collapse
can't do neither of that, if i try download mode the phone shows the same error and turns off. The PC recognizes the phone as "Qualcomm HS-USB QDLoader 9008(COM5). The screen on the phone however is turned off.
markslo112 said:
can't do neither of that, if i try download mode the phone shows the same error and turns off. The PC recognizes the phone as "Qualcomm HS-USB QDLoader 9008(COM5). The screen on the phone however is turned off.
Click to expand...
Click to collapse
you are screwed because you need to send it in(not really fixable)
suljo94 said:
try to get to download mode or fastboot
vol up while inserting usb cable and quote be next time I can't check every answer individually
Click to expand...
Click to collapse
suljo94 said:
you are screwed because you need to send it in(not really fixable)
Click to expand...
Click to collapse
Yeah I know...I will send it in tomorrow, but I doubt they will repair it for free because I messed with it and they will probably see I did something I shouldn't do to the phone. What should I say when I turn it in? Probably best if I say I tried to update it and something went wrong?
Hi, i need help. My phone is on lollipop. I tried flashing a bumped recovery.img and i stupidly didn't realise that bumping was patched. But the phone still booted fine, I just couldn't boot into recovery. Today, I tried booting a modified boot.img and now it won't boot AT ALL! Every time I try and press the power button, it will come up with a message that says something like "security error - cause 2 boot certification verify" then the screen will just go black and the LED will flash red and blue constantly unless I pull the battery out. I am so worried!!!! If you want to know, I flashed the recovery and boot images with flashify. I am very very worried. Is there any way I can fix my phone? Thanks.
GSYNCER said:
Hi, i need help. My phone is on lollipop. I tried flashing a bumped recovery.img and i stupidly didn't realise that bumping was patched. But the phone still booted fine, I just couldn't boot into recovery. Today, I tried booting a modified boot.img and now it won't boot AT ALL! Every time I try and press the power button, it will come up with a message that says something like "security error - cause 2 boot certification verify" then the screen will just go black and the LED will flash red and blue constantly unless I pull the battery out. I am so worried!!!! If you want to know, I flashed the recovery and boot images with flashify. I am very very worried. Is there any way I can fix my phone? Thanks.
Click to expand...
Click to collapse
@GSYNCER, can you get to the download mode? If yes, you might as well flash your firmware using the flash tool. I hope I didn't misunderstand you.
ravi.vydianathan said:
@GSYNCER, can you get to the download mode? If yes, you might as well flash your firmware using the flash tool. I hope I didn't misunderstand you.
Click to expand...
Click to collapse
I am not at home right now, so I can't check. But what I did do was connect a USB cable directly connected to the mains plug (no pc) and tried the download method and it didn't work. Should I try with a proper PC to see if it works? As I said, I cannot enter recovery mode or boot into the system. But I CAN do a hard factory reset, but unfortunately that did nothing I am getting very worried and I do not know if download mode works or not. I will try the download mode method when I get home.
@GSYNCER, do let me know if the Download Mode worked for you or not. I am not sure if plugging in to the mains will have the same effect as connecting to a PC. Hope to hear from you.
ravi.vydianathan said:
@GSYNCER, do let me know if the Download Mode worked for you or not. I am not sure if plugging in to the mains will have the same effect as connecting to a PC. Hope to hear from you.
Click to expand...
Click to collapse
I managed to do it!! I managed to get into download mode when connected to a PC. Just make sure that the cable is USB 2.0 and it will boot into download mode and follow the steps in this video: https: //youtu. be/1WgXuxDbmbc (remove the spaces in the URL)
If you follow the steps in that video, your phone will be working again. I am even sending this message from my LG G3 itself! Good luck restoring. Thank you.
GSYNCER said:
I managed to do it!! I managed to get into download mode when connected to a PC. Just make sure that the cable is USB 2.0 and it will boot into download mode and follow the steps in this video: https: //youtu. be/1WgXuxDbmbc (remove the spaces in the URL)
If you follow the steps in that video, your phone will be working again. I am even sending this message from my LG G3 itself! Good luck restoring. Thank you.
Click to expand...
Click to collapse
@GSYNCER, Happy to hear that it worked for you ?
hello i also have the same problem
I have the same problem as him but mine is not going to download mode and neither is the phone displaying anything.
linzvidzi said:
I have the same problem as him but mine is not going to download mode and neither is the phone displaying anything.
Click to expand...
Click to collapse
Follow this guide
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
VMat21 said:
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
Click to expand...
Click to collapse
You've bricked your phone, you can recover it with qpst tool. For instructions head over to zukfans.eu
Thank you for your answer.
Yes I was able to recover my phone thanks to the help of zukfans.eu guys, but not with qpst tool, now everything works properly.
Teo21 said:
but not with qpst tool
Click to expand...
Click to collapse
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
PHRuiz said:
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
Click to expand...
Click to collapse
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Verolive said:
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Click to expand...
Click to collapse
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
I bought the Zuk z2 (no Pro) on zukmobile.cc, i dont have received it yet, but they sent me this email:
Dear Customer, Sorry for disturbing you. We just got the latest news from factory that as the bug of the current OS, please do not update your firmware when you received the OS Update Remainder. We will release a formal update later, please kindly noticed. Any question, please contact us. Have a nice day! Lenovo ZUK Mobile
Hope i had helped =)
VMat21 said:
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
Click to expand...
Click to collapse
Hi...if you still have the update.zip, could you please updload it somewere? Do you know where to find rom in zip format for recovery?
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Slorks said:
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Click to expand...
Click to collapse
It will go to edl
Doesnt zuk logo comes or not
There is a buttom combinatoin to take it to edl mode
visit zukfans.eu for more info
can you help me to get into the fastboot mode using adb comand?
can you help me to get into the fastboot mode using adb comand?
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
To start your device in edl mode. Just press ans hold volume down button, then connect your usb cable.
Install qualcomm drivers and flash wigh qfil or xiaomi miflash tool.
Sent from my ZUK Z2121 using Tapatalk
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Ronish said:
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Click to expand...
Click to collapse
If you have i modded international rom, that might cause your problems. Use official zuk rom, if you want international flash cm13 or another one.
Sent from my ZUK Z2121 using Tapatalk
bricked zuk z2
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
cukierunio/candyman said:
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
Click to expand...
Click to collapse
I do not understand what you meant when you say " The problem is that ......... file you need"
It appears that when you boot your phone went to stock recovery mode instead of normal mode. If you can not boot it to normal you might need to flash the firmware.
Unroot
How to unroot Lenovo Z2 plus
Hi I had (in fact I still have) one zuk z2 plus 2131, bought by gearbest.
Stock rom installed, unloock bootloader, install TWRP ...
was fine, then I did something in engineering mode,
He went bootloop.
I tried to reinstall everything from TWRP, nothing to do ....
I tried then with QFIL (but I had not read that I need to lock the bootloader)
and it did not ...
I did it again bootloader block and reinstalled both QFIL that with MIFLASH but continues bootloop, can someone help me ....
I still can get into 9008 I would not even play me this opportunity
!^@R said:
How to unroot Lenovo Z2 plus
Click to expand...
Click to collapse
https://zukfans.eu/community/threads/zuk-z2-bootloader-unlock.62/
i installed cm14.1 today from the cyanogenmod website i had everything running fine until i reboot into recovery. i got a black screen and it didnt bot into recovery at all so i held my power button and volume down and nothing happens. i cant even boot up into fast boot or anything. nothing is turning my phone on. when i connect it to my pc nothing happens. is there anything i can do?
There's a mega unbrick guide for the OnePlus 3, use that then install the correct firmware and install the custom TWRP and re flash the ROM
i tried that method but the device doesnt even show up on my pc
envious86 said:
i tried that method but the device doesnt even show up on my pc
Click to expand...
Click to collapse
Get this sorted yet? You'll need a modified TWRP recovery for the newest CM based builds. I went through the same thing yesterday or the day before. Try holding volume down and power for like 30 seconds until you feel it vibrate that it is rebooting. Then hold volume *UP* while it reboots or if you see the "your device is not safe..." flash screen hurry and press volume down and go into fastboot. From there you can fastboot flash a new recovery.
I had the same problem as well, in device manager go to ports (com & LPT) and it will show up there under qualcum device. Don't forget to go and turn off certificate verification
Thanks guys I'll try this after work. Hopefully it works. If not sure oneplus are hopefully releasing a new phone soon
No it didn't work. I have a feeling I deleted something I shouldn't have because I was clearing out my files before I restarted and that was that.
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Just use the recovery rahditzz provided you with a link, if your phone is stuck on black screen with white led hold your power button until it turns off, then boot to fastboot and flash the recovery and you will boot...
rahditzz said:
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Click to expand...
Click to collapse
thanks didnt work. when i fastboot flash recovery and boot again it just goes into a black screen again
Then use unbrick method 2..
rahditzz said:
Then use unbrick method 2..
Click to expand...
Click to collapse
neither method works. all i can do is get into fastboot mode thats it. it wont show up on my pc at all
Method 2 workshop 100%, unless its a hardware fault..
Are you pushing volume up while plugging in cable?
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
I jeep getting the sahara communication failed error
envious86 said:
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
Click to expand...
Click to collapse
Your running vista???? Good god update your OS!!
Maybe your fastboot drivers got updated? There were some reports around this. You could try reinstalling the drivers and following the unbrick guide without an internet connection.
Sent from my ONEPLUS A3003 using Tapatalk
Cool u can boot into Fastboot, what error do you get when you type Fastboot devices? Nothing shows up?
Hello. I can't seem to access recovery mode after I flashed LineageOS 14.1 on my Asus Zenpad 8 Z380KL. I've tried to access the recovery mode by pressing volume up + power button together when restarting my device and by trying via command prompt to no avail. Both methods can give me access to recovery mode when I'm still using the stock Android. Because of this, I can't access TWRP. Can someone help me? Thanks in advance!
knightofzealot said:
Hello. I can't seem to access recovery mode after I flashed LineageOS 14.1 on my Asus Zenpad 8 Z380KL. I've tried to access the recovery mode by pressing volume up + power button together when restarting my device and by trying via command prompt to no avail. Both methods can give me access to recovery mode when I'm still using the stock Android. Because of this, I can't access TWRP. Can someone help me? Thanks in advance!
Click to expand...
Click to collapse
Settings about phone press build number several times to activate developer settings
Settings developer options activate advanced restart
Long press power restart recovery
kurtn said:
Settings about phone press build number several times to activate developer settings
Settings developer options activate advanced restart
Long press power restart recovery
Click to expand...
Click to collapse
Thanks for replying. I'm sorry it took me such a long time to respond, clinical rounds really do take your time and overall life away
:crying:
I've tried that method but it does not work. All it does was a normal reboot even after I choose the recovery reboot option.
knightofzealot said:
Thanks for replying. I'm sorry it took me such a long time to respond, clinical rounds really do take your time and overall life away
:crying:
I've tried that method but it does not work. All it does was a normal reboot even after I choose the recovery reboot option.
Click to expand...
Click to collapse
You pushed recovery radio button, OK, and rebooted into LOS system? Then you should fastboot flash recovery.IMG. ..can you boot into bootloader?
No, choosing the bootloader option also does only normal reboot
knightofzealot said:
No, choosing the bootloader option also does only normal reboot
Click to expand...
Click to collapse
Last chance : connect to a computer and type adb reboot bootloader
hi i have the same issue on sony xperia m2 with lineage os 14.1 ( all the same ) cant acces to recovery and with "fastboot boot recovery.img" i just get the sony logo....
OR .....
knightofzealot said:
No, choosing the bootloader option also does only normal reboot
Click to expand...
Click to collapse
Assuming you have root access, install the "Flashify" app and if it will not let you reboot into recovery, you likely need to re-flash the recovery image. :fingers-crossed: You may have already tried this approach, but if not, it has worked for me in the past when all else has failed.
And yes, clinical rounds do get in the way, but it is not as if you can tell them to wait.
kurtn said:
Last chance : connect to a computer and type adb reboot bootloader
Click to expand...
Click to collapse
No, it doesn't work either
nezlek said:
Assuming you have root access, install the "Flashify" app and if it will not let you reboot into recovery, you likely need to re-flash the recovery image. :fingers-crossed: You may have already tried this approach, but if not, it has worked for me in the past when all else has failed.
And yes, clinical rounds do get in the way, but it is not as if you can tell them to wait.
Click to expand...
Click to collapse
Haha seriously, being a medical student really suck your time away. I'll try this. Thank you!
@knightofzealot, I know that this doesn't answer your question specifically but, I just wanted to let you know that the following is the Enhanced Tag link that's specific to your device.
https://forum.xda-developers.com/t/asus-zenpad-8
It's just the first step for this device to get its own Device Dedicated area on the forum.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Have you solved? Same problem on xperia z1 compact
Have the same device.
Bootloader mode doesn't work either and seems like there is no way to unlock it. Because of this I can't operate with tablet using adb fastboot.
Having Same Issue
I am having same issuee. I flashed Lineage OS 15 using TWRP on Lenovo Vibe K5. Now I'm unble to access recovery mode or TWRP. I'm just seeing the lenovo logo.
knightofzealot said:
Hello. I can't seem to access recovery mode after I flashed LineageOS 14.1 on my Asus Zenpad 8 Z380KL. I've tried to access the recovery mode by pressing volume up + power button together when restarting my device and by trying via command prompt to no avail. Both methods can give me access to recovery mode when I'm still using the stock Android. Because of this, I can't access TWRP. Can someone help me? Thanks in advance!
Click to expand...
Click to collapse