Develop Bugs

Idiot's guide to flashing the Xoom (for fun and profit)

This guide is for you that have a new Xoom (WiFi only, US model) with Android 3.1 and want to
- get root access
- enable the external SD card unit
Please note that Android 3.2, which now is available for the US Wifi models, make this guide more or less obsolete. If your aim is to have root access, then there are probably simpler methods.
What you need to do can be encompassed in these following short steps (will be detailed later on) in the following order. Each step is required before you can proceed to the next one. However, make sure that you are very very careful and dont try to take any shortcuts. That may soft-brick your device, and you may have a difficult time to explain that to your wife ... You have been warned!
I strongly recommend you to read the entire guide before trying this. In fact, read it twice to ensure that you have understood everything. If there is wierd stuff that you dont understand, dont hesitate to ask. The reason for me writing this down is that I like to document what I have learned. This is to me an excellent way to ensure that I will remember what I just did. Another reason was that I could not find a single thread that encompassed all steps required. There are many different threads, but noone (that I could find) that really guides you from start to goal. So enjoy and good luck!
I would like to thank LandMaster and cam30era for helping out with advice during my initial trail-and-error session. I soft-bricked my device once and had big problems to get by point 4.3 (avoid overwriting of CWM), but with their encouragement I finally succeeded.
If someone else adapts this guide for the EU model or the 3G model, feel free to drop me an IM and I will update the guide for these devices too. Until then, this has only been tested on a WiFi only, 32 GB device bought in the US. If you brick your 3G or EU bought model, dont call me ...
0. Overview of the 6 required steps
1. Install Motorola USB drivers for your computers (for USB connectivity)
2. Install Java SDK and Android SDK tools (for adb and fastboot commands)
3. Unlock the device for flashing (allowing replacement of recovery and boot images)
4. Install a modified recovery image (ClockWorkMod recovery for Android)
5. Root the device (Allow r/w access to the device filesystem)
6. Flash a kernel that supports the SD card (SD card access, overclocking etc.)​
Steps 1, 2, 4, 5 and 6 require that you download install, image and zip files needed for the flashing.
All this was performed on a Windows XP x86 SP3. Windows 7, Mac and Linux users will probably have to do some steps differently.
Update July 7: I have tested the procedure on Windows 7 x86 now and the procedure is identical to Windows XP.
1. Install the latest Motorola USB drivers
The installation file can be found here
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
1.1 Install the drivers and ensure that your Xoom is recognized by the computer
2. Installation of development software
Java SDK 6 and Android SDK (for Honeycomb at least) need to be installed. You can find the installation kits here.
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u26-download-400750.html
http://developer.android.com/sdk/index.html
2.1 Install them as any other software.
2.2 What I had to do was to manually modify the PATH environment variable. I use Windows XP so I did that by right clicking on My Computer, choose Properties and select Advanced. Here I added the path to platform-tools and Tools
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\QuickTime\QTSystem\;D:\Java\Android-sdk\platform-tools;D:\Java\Android-sdk\tools
Note: If the Android SDK complains that the Java Dev Kit cant be found, just press Back and then Next again. Wierd, but that seems to do the trick ... go figure.
2.3 Test that ADB and FASTBOOT works. You should open a command window and go to your Android installation directory. Plug in your Xoom to your computer and write 'adb devices'. Your Xoom should now be listed like this
C:\Documents and Settings\Anders>adb devices
List of devices attached
0288414343813157 device​
Did your device not show up? Make sure that you have USB debugging enabled in Settings / Applications / Development
3. Unlocking the device for flashing
This step will effectively erase the internal storage, including all your apps and settings. Use whatever backup you want to rescure important data before you start.
3.1 Power up and start the Xoom
3.2 Ensure that your device is fully recognized by the computer. A good sign is that the 'Portable device' dialog is activated on Windows when your Xoom has booted. The Xoom should also be seen in 'My Computer'. If not, go back to step 2 and double check your USB drivers.
3.3 Use the command 'adb reboot bootloader' to go into Flash mode
3.4 Use the command 'fastboot oem unlock'. This will trigger a dialog on your Xoom. Follow the instructions on the screen to complete the unlocking. I repeat, this *will* do a factory reset and all data will be lost!
3.5 Once unlocked, the Xoom will restart and work as normal, but now ready for step 4
4. Install recovery image (CWM)
Download the recovery image file and save it to your computer
4.1 Boot into flash mode with 'adb reboot bootloader'
4.2 Install your downloaded recovery image
C:\Documents and Settings\Anders> fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img​
4.3 Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo section 4.
4.4 Enter CWM with the following procedure
4.5 Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work, experiment with the timing ...
4.6 When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for reaching this far .
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. There are ways to prevent this (see posts below), but I recommend you to redo step 4 instead of messing with removal of system files. But both methods would probably work. Experiment!
5. Rooting the Xoom
The root zip file is located here
5.1 You need to transfer the ROOT zip file to a working micro SD card. You can do this on a computer or cell phone, but the ROOT zip must be located in the root directory of the SD card.
5.2 Insert the now prepared SD card in the Xoom
5.3 Boot into recovery (as described in 4.3). Navigate using the volume buttons and press the power button to select the active option
5.4 Select 'Install ZIP from sd card'
5.5 Select 'Choose ZIP'
5.6 Navigate to the ROOT zip file with the Volume buttons and select it with the Power button. Confirm that you want to install it.
5.7 Everything should indicate success, so back out to the main CWM menu and reboot the device.
5.8 From Android Market, install the ROM Manager app and start it. If the rooting was successful, then ROM Manager should start without any complaints.
6. Flashing a new kernel that supports SD cards (and maybe more ...)
The kernel that I used is described here http://forum.xda-developers.com/showthread.php?t=978013
The kernel zip file is located here
6.1 This step is identical to 5, but swap the ROOT zip towards the KERNEL zip. For simplicity, you may want to prepare the SD card with both zip files at the same time in step 5.1 ...

Looks great. You just might want to give credit to LandMaster and cam30era, too.

Also is this for just USA or all, cos many people brick there xoom if its just for USA only

okantomi said:
Looks great. You just might want to give credit to LandMaster and cam30era, too.
Click to expand...
Click to collapse
Of course, done

juDGEY2k10 said:
Also is this for just USA or all, cos many people brick there xoom if its just for USA only
Click to expand...
Click to collapse
This is only tested on a US device. OP updated.

Will this wipe all USER data?
Also, is the location of the zipped root file fine? the title says "[BOOT] Wifi-Only Charge Light Off".

I only see one problem, you have recovery before boot.img. If you flash the recovery, without a rooted boot.img and happen to boot into honeycomb, it will erase your recovery and load stock. So you can remove /system/etc/install-recovery.sh and /system/recovery-from-boot.p or flash the boot.img BEFORE rebooting out of recovery.

BrokenPixel said:
Will this wipe all USER data?
Also, is the location of the zipped root file fine? the title says "[BOOT] Wifi-Only Charge Light Off".
Click to expand...
Click to collapse
When you unlock your Xoom, it will wipe all user data.

bwcorvus said:
I only see one problem, you have recovery before boot.img. If you flash the recovery, without a rooted boot.img and happen to boot into honeycomb, it will erase your recovery and load stock. So you can remove /system/etc/install-recovery.sh and /system/recovery-from-boot.p or flash the boot.img BEFORE rebooting out of recovery.
Click to expand...
Click to collapse
You're right. I rooted 1st and flashed CWR later. I then used brd's method to update to 3.1, re-root and flash the new bootloader and kernel. So there is a step missing after Step 3. I'm sorry, I don't remember exactly how to do this from HC 3.1. (meaning what files to use) as I was on HC 3.0 at the time.

BrokenPixel said:
Will this wipe all USER data?
Also, is the location of the zipped root file fine? the title says "[BOOT] Wifi-Only Charge Light Off".
Click to expand...
Click to collapse
Yes it will. Read 3.4 again, it will do factory reset.
The root file may vary from case to case, but the procedure is the same AFAIK. I used the one that "charge light off"... There are probably others too.

bwcorvus said:
I only see one problem, you have recovery before boot.img. If you flash the recovery, without a rooted boot.img and happen to boot into honeycomb, it will erase your recovery and load stock. So you can remove /system/etc/install-recovery.sh and /system/recovery-from-boot.p or flash the boot.img BEFORE rebooting out of recovery.
Click to expand...
Click to collapse
This is true, and I will update the OP to reflect that.

So has anyone followed this guide successfully yet? I don't really want to be the first...

yordikins said:
So has anyone followed this guide successfully yet? I don't really want to be the first...
Click to expand...
Click to collapse
Hi
I did!. And you know that someone gotta be first (actually second). Why not take the credit?

pingvinen said:
This is true, and I will update the OP to reflect that.
Click to expand...
Click to collapse
So I'm guessing the OP has been updated? I think I'm ready to dive in
Sent from my Xoom using XDA Premium App

Abracastabya said:
So I'm guessing the OP has been updated? I think I'm ready to dive in
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
Instructions are good to go. Just make sure that you don't reboot after flashing recovery, and before flashing boot image. If you do, by mistake, no harm done. You will just have to flash recovery again.

cam30era said:
Instructions are good to go. Just make sure that you don't reboot after flashing recovery, and before flashing boot image. If you do, by mistake, no harm done. You will just have to flash recovery again.
Click to expand...
Click to collapse
Sounds good and thanks B-)
Sent from my Xoom using XDA Premium App

Tnx . Very help full .

I don't know but ROM Manager just isn't budging showing any signs of root... or Superuser (+Elite)... or MarketEnabler...
I don't know, I'm kinda lost here. Let me retry (for the tenth time).

rmcsc said:
I don't know but ROM Manager just isn't budging showing any signs of root... or Superuser (+Elite)... or MarketEnabler...
I don't know, I'm kinda lost here. Let me retry (for the tenth time).
Click to expand...
Click to collapse
Try again, and remember that timing (3 seconds) are key to success ...

I'll retry being more precise. I do get into Recovery and I flash the file mentioned. It seems it flashes correctly but when I boot into the OS, there's no signs of root anywhere.
I'll update in a few. Thanks!
Sent from my T-Mobile G2 using Tapatalk

[Q] Need some help on flashing rom.

O.k my wife got an AT&T Samsung Galaxy S3 when they first came out I bought it for her and it has this rom build on it l747UCALG1 and mine which I just bought about three days ago have this build on it l747UCALH9. Her build I was able to root if need be but my phone I can't and I am already on 2 count of the custom binary and I can't reset it since some how I can't root the phone the developers are seeing all of this stuff that we are doing to the phones and I believe they are trying to stop us. But anyway can some one tell me since I have a copy of her stock Firmware how can I just flash my phone or what have you with her stock firmware which is l747UCALG1 so I can root my phone. Also if you don't mind please leave me a clear step-by-step way to do it and if it works without doing any damage at all to my phone, and if I want to later go back to the stock that is on my phone now I can but I don't think I will unless I have to send or take it in ever for warranty repair or just sale it. If this works right leave me your e-mail or if you have a paypal account give me that address or what have you and I will send you a donation.. (Thanks)
Sincerely,
System Network Admin

http://forum.xda-developers.com/showthread.php?t=1739426
OR
http://forum.xda-developers.com/showthread.php?t=1746665

How to Revert to Old Firmware & Root Newest Release -
Hello and welcome to XDA.
I understand your concern to root your device especially with it being on the latest firmware, but I will do my best in order to explain every step to you in the utmost detail. I am currently on I747UCLH9 with a Custom ROM. Meaning I kept the Modem & Bootloader and kicked the Kernel and Firmware. Before I begin, I would like to ask you to thank to all the Developers / Posters who made & put this content together as this would not be possible without them. I will link all of their original posts at the end of this. Be sure to give credit to every one of them and please make sure to give thanks to them. I take absolutely NO CREDIT for any of these links/steps whatsoever. I simply researched and compiled them in order to help you. With that being said, let us begin.
Before anything you must remember this. After you are finished downloading whatever items you need, you MUST (and I cannot stress this enough) FACTORY RESET YOUR DEVICE. Reason being is because a lot of other people have tried this same process of downgrading without wiping and ended up getting startup boot errors. Be sure to NOT sign into your Google account. This is just a warning, follow the steps below to know when you should begin this process.
All files you download should be saved on your desktop. Personally I prefer to make a separate folder for these kind of delicate things. Keeps it organized so you don't forget where you are.
Make sure your phone IS NOT plugged in to your computer as of right now & you have NO external SD card.
Now;
Let's begin.
Before you start be sure you have the Samsung USB drivers installed. Which you can get from Samsung's website or here.
Samsung USB Drivers
Also be sure that you have WinRAR installed as well which you can get right here.
WinRAR
To be on the VERY SAFE side you must download ADB (Android SDK). What you must do is when it asks you for where you would like to install it, you MUST ONLY CLICK "Local Disk C:" . AND THATS IT. The best thing is to keep it here so when you have to execute a command line, it will be very simple. You will have a folder called "android" here. THAT IS YOUR ADB FOLDER. You will understand what I mean shortly. *Note* this is for CWM-T (ClockworkMod Touch).
Android SDK
1. Download the stock rooted LG1 Firmware. I747UCLG1 Stock + Root Only.
2. Right-Click the LG1 Firmware you just downloaded and extract it. It is currently root69.stock_ATT_I747UCALG1.7z ; the extraction process will turn it into the correct .tar file (Flashable file type with Odin)
3. Now that you have the Stock ROM, you need..well ODIN! Here's the link. Odin 3.07.
4. Since it is in .zip format you need to extract this as well. You will end up with 4 files. Right-Click on the Odin3 v3.07.exe and run it as administrator. Now you are at the Odin screen with nothing there -_-".
5. Factory reset your phone. Just let it boot up but DO NOT sign into your Google account, just click through skip everything head straight to your Settings, then Developer Options & make sure USB Debugging is enabled/checked. Back out of your settings completely and you are at the home screen.
6. Now, just hit the power button and turn your device off. After it is completely turned off hold the Volume Down + Home button. While holding these 2. Press and hold the Power button. You should now be holding all three buttons at the same time waiting for a green lettered screen to come on (Download Mode). Use the phone keys to select the option to continue. Your phone will now say Downloading, do not turn off device. (Or along those lines).
7. After selecting the option that sends your phone to the screen with the text "Downloading, Do not turn off device." You should be holding your phone in hand with USB plugged into your computer but your device is not connected. Odin is open on your computer screen with nothing still. From here just plug your phone in and you will see a pop-up in the first box of many under the Odin logo which says "COM: #".(#: Being a select number of your device. This is of no importance, as long as you see this pop up.) Once you see this your phone will be ready to be flashed back. Just click the PDA button and browse to the root69.stock_ATT_I747UCALG1.tar file. (Be sure you click the .tar and not the .zip.)
8. Check to make sure no other boxes should be checked except for Auto-Reboot.
9. Press Start and wait for the process to finish.
10. Everything should go through fine and your phone will start back up and you will be on LG1. You are now on stock firmware BUT rooted. Unplug your phone, Skip past everything once again and make sure USB Debugging is enabled. Keep your phone unplugged & don't forget to close ODIN.
Now before you do anything. You need a Custom Recovery AKA CWM. Well in this case we will be installing the latest touch version.
11. Download the latest ClockworkMod Touch from here. This link is saved in a way specifically from their website. You can either go to www.clockworkmod.com and browse the ROM Manager tab for the 6.0.1.4 Recovery. OR you can just right click the link provided right here and press "Save As..." this file will come up and asked to be saved as recovery-clockwork-touch-6.0.1.4-d2att.img. RENAME IT AS "recovery.img" without the quotes & save it.
ClockworkMod Touch 6.0.1.4
12. Now that you have this file. Plug in your phone to your computer and in the root folder of your phone storage and copy the recovery.img file to it; which is the first folder that pops up when you press open when you plug your phone in. (Remember no SD CARDS!)
13. Now, click the Start button on your taskbar and in the search bar type cmd. Now you will see cmd.exe; press enter and you will see the Command Prompt open. If you saved the Android SDK the way I told you to, you can copy and paste the line below. If you saved it somewhere else you can change the folder simply by browsing to the android folder. Make sure you click on the "platform-tools" folder. NOT the "platform" folder. Also whichever directory it is you must add a "\" at the end so it will find the location correctly.
cd C:\android\platform-tools\
14. Now you are in the directory time to run ADB Shell and flash that recovery! Copy and paste or type the following; I recommend you copy and paste the last line as it gets tricky. After the SU command your phone will be detected.
First you type adb shell
following that su
and finally dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
As you can see in the last command it is named recovery.img there are no special characters or numbers or symbols to mess with the flashing. After you run this command you will an output similar to the following.
14004+0 records in
14004+0 records out
7170048 bytes transferred in 1.430 secs (5014019 bytes/sec)
Finish up this step with the following command
reboot recovery
15. Your device will now restart and head straight into recovery. Congrats you now have LG1 Stock + Root with CWM-T. Unplug the USB and press "Reboot System".
TO UPGRADE BACK TO LH9 WITH ROOT AND CWM-T
Before I begin.
You must remember that this step REQUIRES you download 4 files to go on the root of your phone memory. Your phone should now be on the home screen. Plug it in and open your phone memory. With that being said you need the following files. The Rom, Modem, Bootloader, and Kernel. You will be flashing them in this following order as well.
16. Download the following pieces and save them to the root of your phone's memory. Be sure to remember which file has what name so when you enter the recovery you aren't lost as to which to flash first.
I747UCLH9 ROM Download
I747UCLH9 Modem Download
I747UCLH9 Bootloader Download
I747UCLH9 Kernel Download
17. After everything has finished transferring, remove the phone from the computer and turn your phone. Remember how you got into download mode? Well instead of holding Volume Down + Home, you hold Volume Up + Home. While holding these two press and hold your power button until you see it says Samsung Galaxy S III. If you look at the top left hand of the screen while it's JUST turning on. You will see some blue text flash. When you see that you know your entering the recovery and can release the buttons.
18. You are back at the recovery. You must now do the following. Touch the options as I list them. Follow these steps precisely.
- Wipe Data/Factory Reset
- Yes -- Delete all user data
- Wipe Cache
- Yes - Wipe Cache
- Advanced
- Wipe Dalvik Cache
+++++Go Back+++++
- Install Zip from SD Card
- Choose zip from SD Card
Now choose them in the following order, ROM, Modem, Bootloader, and finally Kernel.
WAIIIITTTTTTTT! After you are finished flashing the Kernel you MUST do the following. Click options as I state them.
- Wipe Cache
- Yes - Wipe Cache
- Advanced
- Wipe Dalvik Cache
- Advanced
- Fix Permissions
+++++Go Back+++++
Reboot System
19. Wait for your phone to reboot and NOW you can sign into your Google account. Go past everything go into your App drawer first and check for Superuser/SuperSU once you see that, go into your settings and check your ROM, Modem, Bootloader, Kernel. Yes. They are bone stock with root. Congrats you achieved maximum upgrade with root.
Now I would like to give my shout-outs; Thanks; and share the following posts that helped me compile this. I couldn't have done it without you guys.
neverends - Samsung Drivers & Odin provided. Steps to flash with Odin as well.http://forum.xda-developers.com/showthread.php?t=1722686
mrRobinson - I747UCLG1 Stock root injected file. Location of Odin, and commands to execute ADB shell to flash recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
drothenberger - Provided CWM Flashable version of I747UCLH9. Blessing, really. Stock root with latest FULL update without having to revert back to LG1 stock.
http://forum.xda-developers.com/showthread.php?t=1896773
ALSO
Thanks to you all above; the CWM Team, CM10/AOKP Team, Moderators & Posters alike. None of this would have been possible without you. Keep up the good work. Bless -

jaysoblitzed said:
Hello and welcome to XDA.-
Click to expand...
Click to collapse
You made an awesome guide!! Hope he made a generous donation. Thanks!!

werked said:
You made an awesome guide!! Hope he made a generous donation. Thanks!!
Click to expand...
Click to collapse
Thank you, I really appreciate that. I don't accept donations I simply did it to help those who wanted/needed it
Sent from my T&K Blessed SGH-I747

I do not see the 4 download links for the ROM, Modem, Bootloader and Kernel. Can you post them.

I will fix the links but if you simply look at the people / threads I have given credit to at the bottom of my guide you will see drothenberger's thread. He has the original links there. Mind you, you MUST scroll down to the part where it says "PIECES:" and download following his links. Don't worry I will re-post them accordingly.
Sent from my T&K LH9 Blessed SGH-I747

Does upgrading from rooted LH9 from a rooted LG1 trip flash counter since we are installing 4 separate files instead of 1 .tar?
thanks!

How to put CyanogenMod on your Xperia device

I will be telling you how to put CM 10 on your device without root, as root will automatically come to your device when you are done with CMing. This method works for every phone. I used FXP208-cm-10-20130223-UNOFFICIAL-anzu.zip for my Xperia Arc LT15i. Just check under the project status tab if you want to know if your device is supported. You can also use CM 9, 8 or 7 if you like, the method is the same. Please consider the fact that that this will void your phone's warranty. (Who cares?)
Note:
You do not need root for this.
You need to unlock your phone's bootloader for this.
Downloads:
Fastboot mediafire.com/?47eu9m848c5wbi0
CyanogenMod freexperiaproject.com
Google Apps goo.im/gapps/gapps-jb-20120726-signed.zip
Sorry I could not put links... I am not new to Android and CM but I am new to xda so they did not let me put links
Instructions:
1. Extract the CyanogenMod zip and Fastboot zip files to a convenient location.
2. Copy boot.img from the CM folder to the Fastboot folder. There should now be 5 files in the Fastboot folder.
3. Connect your phone to your computer as you normally would.
4. Place Google apps and CM on the root of your SD card in .zip file format.
5. Disconnect your phone and reconnect in fastboot mode. Just search Google for how to connect phone in Fastboot mode.
6. Go to the Fastboot folder. Open a command window and hold the shift button and right-click.
7. Select the " Open command window here " option.
8. Type
Code:
fastboot flash boot boot.img
The boot image will be flashed to your phone. Disconnect your phone from PC
9. Boot your phone. When the FreeXperia logo comes press the back button like CRAZY until your phone goes into ClockworkMod recovery.
10. Go to advanced. Select 'wipe dalvik cache' and select yes.
11. Go back to main menu and select 'wipe data/factory reset' and select yes.
12. At the main menu select 'wipe cache partition' and yes.
13. Go to mounts and storage and select 'format /system'.
14. From the main menu select 'reboot system now'
15. Setup your phone.
16. Install updates.
17. Enjoy.
If you found this post helpful then please press the thanks button on the left

Or, you could've just flashed a pre-rooted kernel like Advanced Stock.

There's a video in my Arc guide too explaining how to install CM.
Sent from Myushi

MarcSinger said:
Or, you could've just flashed a pre-rooted kernel like Advanced Stock.
Click to expand...
Click to collapse
Here we are trying to CM, not root.

KabbageX said:
Dude, here we are trying to CM, not root.
Click to expand...
Click to collapse
Yes, NOW you are. AFTER you edited your post, in which you clearly mentioned having problems with rooting and cited this as a method of rooting your device/getting CM10 installed. Besides, there's already a detailed tutorial on installing Cyanogenmod on their own website:
http://wiki.cyanogenmod.org/w/Install_CM_for_anzu

MarcSinger said:
Yes, NOW you are. AFTER you edited your post, in which you clearly mentioned having problems with rooting and cited this as a method of rooting your device/getting CM10 installed. Besides, there's already a detailed tutorial on installing Cyanogenmod on their own website:
http://wiki.cyanogenmod.org/w/Install_CM_for_anzu
Click to expand...
Click to collapse
He is new to forum and excited.Give hime a break.

MarcSinger said:
Yes, NOW you are. AFTER you edited your post, in which you clearly mentioned having problems with rooting and cited this as a method of rooting your device/getting CM10 installed. Besides, there's already a detailed tutorial on installing Cyanogenmod on their own website:
http://wiki.cyanogenmod.org/w/Install_CM_for_anzu
Click to expand...
Click to collapse
Ok

Very Helpful
Allow me to change step #17 to:
17. Download Swapper2 and install.
and NOW #18. Enjoy

AdibSul said:
Very Helpful
Allow me to change step #17 to:
17. Download Swapper2 and install.
and NOW #18. Enjoy
Click to expand...
Click to collapse
I am glad I could help.

Us 20161107 rom

https://mega.nz/#!ysUGgKBL!2i6zO1PdP-wdG_cCY58HOat7tVIzMxr-NZ1Z1tlvT8U
You lose Baseband, so I need help!
EDIT: Format All + Download will get right Baseband.
Now I learnt that the blue trash can icon is linked with the agold.x.x. in the systemui.apk, can someone more knowledgable then me create a patch or something to remove it? Thx.
Tutorial!
Resources:
Maui META
SP Flash Tool
ROM
TWRP
Step 1
Load ROM into SP Flash Tool
Unpack the Package FIles ZIP
Select the lk.bin for the 2 lk files
Select logo.bin for logo.bin
Select TWRP for Recovery
Select Format All + Download
Connect Phone: I did by pressing Vol Up and connecting Type C
Wait till download finishes
Unplug phone
Launch Maui META
Press Reconnect button
Plug Phone in (I did by pressing Vol Up and connecting Type C)
Wait till IMEI interface pops up
Select Change NV Database File
Choose the MDDB_InfoCustomAppSrcP_MT6755_S00_MOLY_LR11_W1539_MD_MP_V9_P15.EDB FIle
Type Imei
Select Download.
Press Disconnect on 1st Interface.
Unplug phone.
Flash Same ROM
Boot.
Power Off
Boot into Recovery (Vol Up + Power)
Do what ever you want.
I do recommend my process, if you want to save time and your sanity.
@skeleton1911 or @Deepflex?

Hello
Screenshot?

Deepflex said:
Hello
Screenshot?
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B5ZXRIpl-Z6vbU1wcXcwRXVUVlk/view?usp=drivesdk

Ninja X said:
https://mega.nz/#!ysUGgKBL!2i6zO1PdP-wdG_cCY58HOat7tVIzMxr-NZ1Z1tlvT8U
You lose Baseband, so I need help!
EDIT: Format All + Download will get right Baseband.
Now I learnt that the blue trash can icon is linked with the agold.x.x. in the systemui.apk, can someone more knowledgable then me create a patch or something to remove it? Thx.
Tutorial!
Resources:
Maui META
SP Flash Tool
ROM
TWRP
Step 1
Load ROM into SP Flash Tool
Unpack the Package FIles ZIP
Select the lk.bin for the 2 lk files
Select logo.bin for logo.bin
Select TWRP for Recovery
Select Format All + Download
Connect Phone: I did by pressing Vol Up and connecting Type C
Wait till download finishes
Unplug phone
Launch Maui META
Press Reconnect button
Plug Phone in (I did by pressing Vol Up and connecting Type C)
Wait till IMEI interface pops up
Select Change NV Database File
Choose the MDDB_InfoCustomAppSrcP_MT6755_S00_MOLY_LR11_W1539_MD_MP_V9_P15.EDB FIle
Type Imei
Select Download.
Press Disconnect on 1st Interface.
Unplug phone.
Flash Same ROM
Boot.
Power Off
Boot into Recovery (Vol Up + Power)
Do what ever you want.
I do recommend my process, if you want to save time and your sanity.
@skeleton1911 or @Deepflex?
Click to expand...
Click to collapse
i could try to find what controlls the trash can and make a patch, ill see if i find anything, ill report back results tomorrow

Ruben Craveiro said:
i could try to find what controlls the trash can and make a patch, ill see if i find anything, ill report back results tomorrow
Click to expand...
Click to collapse
Thanks. Sound excellent. From what I learnt, the agold blah blah controls the recent and the trash can. I can resize the trash files to 1px by 1px, but the height of the overlay remains. Anyway, I'm a noob so i have no idea, let me know when you've got something. Thanks.

Ruben Craveiro said:
i could try to find what controlls the trash can and make a patch, ill see if i find anything, ill report back results tomorrow
Click to expand...
Click to collapse
How's it going?

Ninja X said:
How's it going?
Click to expand...
Click to collapse
i kinda forgot about it, and now im on lineageos 14.1 and i have no intentions of going back, so i wont make any patch, sry

Ruben Craveiro said:
i kinda forgot about it, and now im on lineageos 14.1 and i have no intentions of going back, so i wont make any patch, sry
Click to expand...
Click to collapse
:crying: Ok

How to Root Your Samsung Galaxy A10 + Install Twrp

READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!

i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?

Oh. Alright thanks for telling me.

Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.

Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:

cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?

cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.

Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.

Can you upload it to Mediafire? Mega marks a "temporal error"...

Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?

Works on a105m?

Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes

i receive message that i running samsumg not official firmware after odin install recovery.tar

not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)

andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.

BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message

have you fixed the storage reduced to 16gb problem?

I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?