I had an AT&T SX56 phone and it worked great. I just bought another one because mine broke. I used the sim card that was in my old phone but it doesn't pick up ANY network. When I went to manually choose a network, they were all European networks. Nothing from the US was even listed. It has a somewhat different software that I am used too. When it boots up it says it is running xda-developers Special Edition ROM V1.2. Is there anything I can do to fix this all up Also, the desktop is a bit cluttered for me, is it possible to have just the standard AT&T desktop?
i think it has something todo with different bands (900 1800 1900). but don't know the exact details.
maybe try a search on band selection?
http://lumpistefan.dyndns.org/
http://lumpistefan.dyndns.org/
It helps alot .
Have you tried entering bootloader mode and choosing 900/1900 from the gsm menu?
after reading this post I am wondering if you can somehow change the band that a Qtec 2020 runs on. right now mine runs on 900 usa but I'm wanting to change it to 850 usa cingular uses it and it has a much stronger signal in my area. Please let me know if there is. thanks
HI all, thanks here for all your help. I finnaly have my unlock code from T-mobile UK, for 30 pounds, but i think it is workth it.
Now using the PRO as a phone, it is kinds weird to get used to. I live inthe US and i put my T-MOble US sim card in, when i check the settings, i found out for some strange reason that the GSM band it was using was EGSM+DCS1800, i don't know what this band is, but i noticed that i don;t get enought bars, always loosing signal, and i have put the new 1.08 radio rom on it. My SK65 gets better signal.
The only other option i see there for GSM band is PCS1900, so i have manually set it to this. My question is, which band should i be using? whats the diffrence? and when setting up WAP for MMS, do i use WAP1.2 or WAP2.0.
Also does the UTMS2100 mean it will work on Sprints 2100 network?
Thanks.
Search is your friend
All of the Universal forums are full of information about why the MDA Pro is not as useful in the US because it is just Tri-Band. T-Mo USA uses GSM/GPRS 1900 for voice and data. You need to stick to this band alone. Try using WAP 1.2 for WAP. There's no EDGE available on the Uni.
No, Sprint won't work It's different technology using a different standard. You can only use UMTS in Europe, the Middle and Far East. That's why this device is targeted for these markets and was never brought to North America. And it never will be.
Let's hope the successor to the Universal can do it by incorporating the latest technologies prevalent in North America.
I have an unlocked K10/ATT model that I was attempting to use overseas in Japan on docomo network needs one of (LTE band 1,19,21).
After checking online at some sites I have seen mixed reports if the phone supports LTE band 1 2100mhz.
The phone does not connect to carrier and the manuals for ATT version look like band 1 is not supported.
Im wondering if the hardware itself actually supports band 1 and if there is any way via firmware update or secret menu to enable it.
Appreciate any related info.
Kuma
Hello,
I have a note 10+ of US origin with snapdragon 855, I want to use it in Europe (France) in order to have the best possible network.
I installed the firmware N975U1 XAA but I don't have 4G + (I only have the LTE logo, no LTE +), a lot problem of concern for notification with my mailboxes.
So I would have liked to know if there was a more suitable firmware for France in order to have the 4G logo which replaces the LTE logo? and maybe be able to receive 4G +?
I know I cannot install the XEF firmware because the processor is not the same.
Thanks for your help
Hello ,
I'm surprise ! Your provider ? Your mobile network coverage ? If you have another mobile , full XEF , what result on the same place ? switch off !
I use the Orange network. the network is the same with another mobile except that I receive 4g + while there it is simple lte. I know there is normally lte + in us. so know if it is possible to have a firmware allowing to have 4g +. after maybe nothing to do but I receive with great difficulty the notifications gmail and other mailbox. I have however reinstalled everything several times but no change.
does anyone know if this is possible? or a tweak that allows you to do it? thank you
4G, 4G+, lte, lte+, lteA, 5G, etc, are sevice provider dependant, so, you will get what the carrier gives you, no way to obtain services that other carriers provide
I'm using a Canadian Note 10+ (N975W) here in the UK which is working flawlessly, I have full 4G+, VoLTE & WiFi calling, the only thing that doesn't work is Samsung Pay which I knew anyway, and as I use Google Pay, it isn't a issue :highfive:
Firstly search the bands that your phone uses with its model name on GSM arena, then the ones used by the carriers you'll need for both countries.
Then with the RNC mobile app or with Activity Launcher, search "hidden" and launch the one under "paramètre d'appel"
You'll be able to see what bands are actually used by your current carrier.
Since the protocol names and frequency aggregation hints are carrier specific, you may already use 4G+ without knowing.
Hello, I'm going back to the topic because I still don't have a solution at the moment. I had the opportunity to have a French Note 10 alongside with the same operator, I had the "4G +" (LTE+) logo, the speeds were tested at 300 mega / sec. With my 10+ USA rating stuck on the LTE logo I only get 50 mega / sec ...: /
according to my research this is a carrier aggregation problem.
How to unlock it?
I just tried the Canadian rom and the same, no support for LTE + or 4G +, the speeds are as low as with the US version
I’m currently using a T mobile sim card in my Canadian s20+ During my stay in US. My reception doesn’t seem to be too good and LTE speeds feel slow. Just wondering if running a Canadian firmware device is causing me to miss any LTE and even 5G bands here? Based on google searches it seems the W device has the same band requirements for T mobile.
I do see WiFi calling feature available which kind of tells me the firmware might be ok?
Finally, I don’t know if I’m supposed to see a 5G logo when on T-Mobile or not, so far I only see LTE.