Hello everyone,
I come here because I have a big issue with my Pixel 3 XL.
It's up-to-date regarding the OTA updates i.e. I have the latest firmware installed.
I've never done anything special regarding "tweaking", such as enabling the developer mode i.e. the developer mode is unfortunately not enabled.
I was browsing the Internet and the phone suddenly rebooted unexpectedly. Then it was in a reboot loop. I pressed power and volume down buttons to enter the boot menu.
The boot loop stopped but I was unable to do anything to make my phone boot properly again. In the recovery menu, there is no option to wipe the cache partition.
There should be roughly 400 MB of free space on the phone. I was thinking that maybe this could have been the cause of the issue.
When the phone is off and not plugged to the charger, the percentage of battery decreases. When the charger is plugged, the percentage of battery does not decrease but does not increase either. It seems I cannot charge the phone anymore. Currently remains 13%.
When the phone is off and I press the power button, the Google logo shows up and the progress bar below has just time to appear before the phone vibrates and goes off.
I don't care much saving the phone, but it's extremely important to me to be able to recover the photos it contains (standard DCIM folder).
Most of what I found googleing so far is about wiping the cache partition, but there is no such option on my Pixel 3 XL.
Since the developer mode (USB debugging) was not enabled when the phone was working fine, I cannot use adb to pull files. I can sideload though. As far as I understood, in my situation it is not possible to enable the developer mode.
I've just heard about TeamWin Recovery Project, and still trying to figure out if this can help me.
Could someone please tell me how I can, at least, backup my photos?
Of course the best would be able to boot the phone normally, but really my first goal is to save my photos.
Is there a way to reflash the firmware with the same version, or another version, without losing data, just like what happens on a regular update e.g. when a new Android version is deployed?
Thank you.
magrac said:
Hello everyone,
I come here because I have a big issue with my Pixel 3 XL.
It's up-to-date regarding the OTA updates i.e. I have the latest firmware installed.
I've never done anything special regarding "tweaking", such as enabling the developer mode i.e. the developer mode is unfortunately not enabled.
I was browsing the Internet and the phone suddenly rebooted unexpectedly. Then it was in a reboot loop. I pressed power and volume down buttons to enter the boot menu.
The boot loop stopped but I was unable to do anything to make my phone boot properly again. In the recovery menu, there is no option to wipe the cache partition.
There should be roughly 400 MB of free space on the phone. I was thinking that maybe this could have been the cause of the issue.
When the phone is off and not plugged to the charger, the percentage of battery decreases. When the charger is plugged, the percentage of battery does not decrease but does not increase either. It seems I cannot charge the phone anymore. Currently remains 13%.
When the phone is off and I press the power button, the Google logo shows up and the progress bar below has just time to appear before the phone vibrates and goes off.
I don't care much saving the phone, but it's extremely important to me to be able to recover the photos it contains (standard DCIM folder).
Most of what I found googleing so far is about wiping the cache partition, but there is no such option on my Pixel 3 XL.
Since the developer mode (USB debugging) was not enabled when the phone was working fine, I cannot use adb to pull files. I can sideload though. As far as I understood, in my situation it is not possible to enable the developer mode.
I've just heard about TeamWin Recovery Project, and still trying to figure out if this can help me.
Could someone please tell me how I can, at least, backup my photos?
Of course the best would be able to boot the phone normally, but really my first goal is to save my photos.
Is there a way to reflash the firmware with the same version, or another version, without losing data, just like what happens on a regular update e.g. when a new Android version is deployed?
Thank you.
Click to expand...
Click to collapse
I don't think there is anything you can do without developer mode, but aren't your photos backed up to Google servers at https://photos.google.com?
dcarvil said:
I don't think there is anything you can do without developer mode, but aren't your photos backed up to Google servers at https://photos.google.com?
Click to expand...
Click to collapse
no, I don't synch with the Google cloud.
I've just read that in order to install TWRP, I needed a unlocked bootloader, which is not my case. Unlocking the bootloader would cause my data to be wiped (for security reason it seems). Is that true?
magrac said:
I've just read that in order to install TWRP, I needed a unlocked bootloader, which is not my case. Unlocking the bootloader would cause my data to be wiped (for security reason it seems). Is that true?
Click to expand...
Click to collapse
Unfortunately, that is correct. Unlocking the bootloader wipes the data. I know of nothing you can do.
was your problem resolved?
Related
Please help. This is a serious matter for me.
Started having this problem at February 14th, 02.10 AM.
Have been looking for the answers in the Oppo Forums too but still got no answers.
Okay, I have a habit, which is moving all of my applications from my internal storage to my external SD card, after I let those applications doing their functions and programs and features and so on for a while. It's not a big deal for me to set up my phone again after I restarted it, and usually it works perfectly. Just restart and I would get to operate my phone again. However, this time, I got a bad luck. The worst one, considering the fact that I'm all-around-gadget.
Here's the results I got from reading a lot of threads (not only from this forum and OPPO forums):
OPPO Swype Keyboard has stopped working? Really?
After restarting my un-rooted Find 7 (9076), I cannot type the password on my lock screen. Like any other Android devices, it would always come back to it's system or default applications, I knew that fact. But this time, when I touched the blank space to type my password, nothing came out. No OPPO Keyboard, which happened to be OPPO's default keyboard. No other keyboards. None at all.
So, I cannot do one single thing to my phone except just turn it on and stared at it like a complete idiot.
Then I decided to turn my phone off and turn it on again after a while.
But still, the same thing happened. No keyboards.
That time, I decided to turn off my phone again and pulled out the battery and my external SD card.
After putting the battery back (External SD Card was still outside), and turned it on again, the same thing still happened.
Sliding my fingers up and down, nothing happened. The touchscreen was still there, showing me my date and time even though I was sliding my fingertips up and down.
Not too long after, I felt my phone got warmer and warmer. I tried double-clicking the home button, which I already set to unlock the lock screen, was also useless. The screen was still black and locked. When it got over-heating, automatically I pulled out the battery without even turning off the phone.
That one was my fault. I knew, and well, honestly speaking, this is the first time I'm in this kind of situation. In the past, my Find 7 would just suddenly restarted itself then everything went back to normal, but not this time.
And here's the beginning of my Fastboot Loop.
Fastboot Loop on un-rooted device
After pressing the Power button and the Volume Up button at the same time, it would bring you to the Recovery Mode. When I did that to my Find 7, it brought me to a black backgrounded screen with cute OPPO mascot and some Hanzi (Chinese handwritings). Picture attached.
I tried to wait for 2-3 hours and found nothing happened.
Pulling the batter out and putting the batter back would do the same.
In other words, I am not able to gain access to my Recovery Mode.
Why didn't bring the phone to the service centre?
I thought about this already.
When I tried to connect my phone to my pc, it can detect the phone but cannot access the files because the phone was still locked with the password.
Usually, the service centre requires us to unlock the phone if there's a problem with it, right? In my cases, yes.
I was searching all night to find out the answers.
I found some threads about the Fastboot Loop thing and etc, but they are only for rooted devices.
I'm using:
OPPO Find 7 (9076)
Color OS 2.0.5i Beta
Android KitKat 4.4.2
Device is not rooted, still original.
Still dealing with the same problem until now (the time I post this thread).
Anyone has solved this problem and guide me step by step to finish this?
daiichi said:
Please help. This is a serious matter for me.
Started having this problem at February 14th, 02.10 AM.
Have been looking for the answers in the Oppo Forums too but still got no answers.
Okay, I have a habit, which is moving all of my applications from my internal storage to my external SD card, after I let those applications doing their functions and programs and features and so on for a while. It's not a big deal for me to set up my phone again after I restarted it, and usually it works perfectly. Just restart and I would get to operate my phone again. However, this time, I got a bad luck. The worst one, considering the fact that I'm all-around-gadget.
Here's the results I got from reading a lot of threads (not only from this forum and OPPO forums):
OPPO Swype Keyboard has stopped working? Really?
After restarting my un-rooted Find 7 (9076), I cannot type the password on my lock screen. Like any other Android devices, it would always come back to it's system or default applications, I knew that fact. But this time, when I touched the blank space to type my password, nothing came out. No OPPO Keyboard, which happened to be OPPO's default keyboard. No other keyboards. None at all.
So, I cannot do one single thing to my phone except just turn it on and stared at it like a complete idiot.
Then I decided to turn my phone off and turn it on again after a while.
But still, the same thing happened. No keyboards.
That time, I decided to turn off my phone again and pulled out the battery and my external SD card.
After putting the battery back (External SD Card was still outside), and turned it on again, the same thing still happened.
Sliding my fingers up and down, nothing happened. The touchscreen was still there, showing me my date and time even though I was sliding my fingertips up and down.
Not too long after, I felt my phone got warmer and warmer. I tried double-clicking the home button, which I already set to unlock the lock screen, was also useless. The screen was still black and locked. When it got over-heating, automatically I pulled out the battery without even turning off the phone.
That one was my fault. I knew, and well, honestly speaking, this is the first time I'm in this kind of situation. In the past, my Find 7 would just suddenly restarted itself then everything went back to normal, but not this time.
And here's the beginning of my Fastboot Loop.
Fastboot Loop on un-rooted device
After pressing the Power button and the Volume Up button at the same time, it would bring you to the Recovery Mode. When I did that to my Find 7, it brought me to a black backgrounded screen with cute OPPO mascot and some Hanzi (Chinese handwritings). Picture attached.
I tried to wait for 2-3 hours and found nothing happened.
Pulling the batter out and putting the batter back would do the same.
In other words, I am not able to gain access to my Recovery Mode.
Why didn't bring the phone to the service centre?
I thought about this already.
When I tried to connect my phone to my pc, it can detect the phone but cannot access the files because the phone was still locked with the password.
Usually, the service centre requires us to unlock the phone if there's a problem with it, right? In my cases, yes.
I was searching all night to find out the answers.
I found some threads about the Fastboot Loop thing and etc, but they are only for rooted devices.
I'm using:
OPPO Find 7 (9076)
Color OS 2.0.5i Beta
Android KitKat 4.4.2
Device is not rooted, still original.
Still dealing with the same problem until now (the time I post this thread).
Anyone has solved this problem and guide me step by step to finish this?
Click to expand...
Click to collapse
boot into recovery and format the phone, this should fix it. If you want to backup your data, just boot into fastboot, connect phone to pc, run fastboot command from sdk tool, push custom recovery, flash twrp, make nandroid backup, fomat phone along with all the storage and then flash oppo stock rom (you need to download) or any other custom rom with gapps. To restore use nandroid manager, do not restore system files if you are flashing custom rom.
treacherous_hawk said:
boot into recovery and format the phone, this should fix it. If you want to backup your data, just boot into fastboot, connect phone to pc, run fastboot command from sdk tool, push custom recovery, flash twrp, make nandroid backup, fomat phone along with all the storage and then flash oppo stock rom (you need to download) or any other custom rom with gapps. To restore use nandroid manager, do not restore system files if you are flashing custom rom.
Click to expand...
Click to collapse
Thank you for your help Sir.
But, my Find 7 already operated normally again since I left it for a few days uncharged and off.
Then I got into Recovery Mode by pressing Power button and Volume Down button (not Volume Up button) while in the middle of my fast-boot loop.
It worked. I could gain access to ColorOS Recovery Mode.
So, I reset my Find 7, then re-installed my applications and everything again.
Thank you for answering!
So I just got an LG G pad 10.1 VK700 from Verizon the other day. I rooted the device on the first day but never really added any additional apps or software.
Another member in the household was using the tablet and it asked if they wanted to accept the VZW Update for KitKat 5.0. They downloaded the update, and now the tablet is stuck in a bootloop at the Fastboot screen.
There are only 3 options I can select from this screen in the top left using the volume keys: RESTART, RESTART BOOTLOADER & POWER OFF. Any time I select either of the restart options, the screen just goes blank and hangs. I have to manually power off, and upon turning back on I am right back to this limited Fastboot menu.
Bottom left reads:
FASTBOOT MODE
PRODUCT_NAME - E9LTE_VZW
VARIANT - e9lte_vzw Toshiba 16GB
HW VERSION - rev_10
BOOTLOADER VERSION - N/A
BASEBAND VERSION - N/A
CARRIER INFO - N/A
SERIAL NUMBER - VZ7005xxxxxxx
SECURE BOOT - disabled
LOCK STATE - locked
I booted into Recovery mode, but any of the options I select from the System recovery menu send me right back to the Fastboot screen.
Is there anything to be done at this point?
UPDATE: Problem solved. Research into the other variants of the LG G Pad lead me to the the LG Mobile Support Tool, which you can find by googling B2CAppSetup.exe.
Now, if you are stuck in a Fastboot loop as I was, I ended up having to restart the device while holding down the Power + Volume UP & DOWN. This brought up a screen displaying a bar code and the device MSN and IMEI number. Using this number return to the LG Mobile Support tool and select Options>Upgrade Recovery. Even if your device is already plugged in via USB, the software will not recognize the device -- you may want to double check to make sure your device drivers were installed prior to this step. Input your IMEI number into the box and restart the device in to download mode. It took a few attempts due to the quick action of Fastboot, but I was finally able to access the menu while USB was plugged in to the device and restarting while holding the Volume + key. Now you can continue with the installation and you will be back into your tablet in no time.
I have access to the device via usb / fastboot, adb is not registering. If anyone has any suggestions on what I can try, please let me know. I do not have a backup or a version of the OEM ROM. Every effort so far just sends me right back to the Fastboot screen with 3 options. Anything I can run from command prompt using fastboot alone that would help in this situation? Any way to do a factory restore without having an actual OEM image?
Well im stuck at the verizon screen too but for a different reason
JRSwole said:
So I just got an LG G pad 10.1 VK700 from Verizon the other day. I rooted the device on the first day but never really added any additional apps or software.
Another member in the household was using the tablet and it asked if they wanted to accept the VZW Update for KitKat 5.0. They downloaded the update, and now the tablet is stuck in a bootloop at the Fastboot screen.
There are only 3 options I can select from this screen in the top left using the volume keys: RESTART, RESTART BOOTLOADER & POWER OFF. Any time I select either of the restart options, the screen just goes blank and hangs. I have to manually power off, and upon turning back on I am right back to this limited Fastboot menu.
Bottom left reads:
FASTBOOT MODE
PRODUCT_NAME - E9LTE_VZW
VARIANT - e9lte_vzw Toshiba 16GB
HW VERSION - rev_10
BOOTLOADER VERSION - N/A
BASEBAND VERSION - N/A
CARRIER INFO - N/A
SERIAL NUMBER - VZ7005xxxxxxx
SECURE BOOT - disabled
LOCK STATE - locked
I booted into Recovery mode, but any of the options I select from the System recovery menu send me right back to the Fastboot screen.
Is there anything to be done at this point?
UPDATE: Problem solved. Research into the other variants of the LG G Pad lead me to the the LG Mobile Support Tool, which you can find by googling B2CAppSetup.exe.
Now, if you are stuck in a Fastboot loop as I was, I ended up having to restart the device while holding down the Power + Volume UP & DOWN. This brought up a screen displaying a bar code and the device MSN and IMEI number. Using this number return to the LG Mobile Support tool and select Options>Upgrade Recovery. Even if your device is already plugged in via USB, the software will not recognize the device -- you may want to double check to make sure your device drivers were installed prior to this step. Input your IMEI number into the box and restart the device in to download mode. It took a few attempts due to the quick action of Fastboot, but I was finally able to access the menu while USB was plugged in to the device and restarting while holding the Volume + key. Now you can continue with the installation and you will be back into your tablet in no time.
Click to expand...
Click to collapse
Hello I have the exact same model I got 28th my g4 and successfully rooted with kingroot and used supersume to change it to supersu. Everything was perfect and running fine and I tried an entropy engine I use on my other rooted phone and it was not help so I disabled it and rebooted like I have with my other one before and it stuck at that horrible red screen lol. I haven't done anything else major to alter anything to do with the OS like installing an OTA and I can only get to the same screens as you. My problem is I don't have a PC and haven't in a very long time and if I get to one I wouldn't know where to start out, last computer I owned has a floppy disk lol but I don't see how I would need to re flash the entire OS because of an entropy engine hickup. If you or anyone know of a way to slap this thing back to reality I would highly appreciate it. I got very familiar with the android os and how it works but never had a PC to go beyond a basic root so technically I'm still a noob in a way. I only care to expand dual window to other apps if I get it fixed cuz I'm not gonna risk screwing with it any more now than I have to, my luck is too bad lol thanks in advance
dadrumgod said:
Hello I have the exact same model I got 28th my g4 and successfully rooted with kingroot and used supersume to change it to supersu. Everything was perfect and running fine and I tried an entropy engine I use on my other rooted phone and it was not help so I disabled it and rebooted like I have with my other one before and it stuck at that horrible red screen lol. I haven't done anything else major to alter anything to do with the OS like installing an OTA and I can only get to the same screens as you. My problem is I don't have a PC and haven't in a very long time and if I get to one I wouldn't know where to start out, last computer I owned has a floppy disk lol but I don't see how I would need to re flash the entire OS because of an entropy engine hickup. If you or anyone know of a way to slap this thing back to reality I would highly appreciate it. I got very familiar with the android os and how it works but never had a PC to go beyond a basic root so technically I'm still a noob in a way. I only care to expand dual window to other apps if I get it fixed cuz I'm not gonna risk screwing with it any more now than I have to, my luck is too bad lol thanks in advance
Click to expand...
Click to collapse
If you are stuck in this particular Fastboot loop without a computer I am afraid your options are going to be very limited. The only thing I can imagine that you would be able to try is restarting the tablet while holding down the Power + Volume Down keys to access the stock System recovery menu. You can try to use Factory data reset and Wipe cache to see if that can resolve the issue, but for me every attempt to perform actions from this menu brought me right back to the Fastboot screen. The only other way I could communicate to the device in this scenario was using command line, and even then I could only access fastboot and not abd.
I would highly advise getting at least a cheap older laptop with Windows if you plan on rooting any device, otherwise the dangers will far outweigh the benefits. I'm just hoping some development comes along for the VK700 G Pad 10.1, at least a TWRP or CWM release.
JRSwole said:
If you are stuck in this particular Fastboot loop without a computer I am afraid your options are going to be very limited. The only thing I can imagine that you would be able to try is restarting the tablet while holding down the Power + Volume Down keys to access the stock System recovery menu. You can try to use Factory data reset and Wipe cache to see if that can resolve the issue, but for me every attempt to perform actions from this menu brought me right back to the Fastboot screen. The only other way I could communicate to the device in this scenario was using command line, and even then I could only access fastboot and not abd.
I would highly advise getting at least a cheap older laptop with Windows if you plan on rooting any device, otherwise the dangers will far outweigh the benefits. I'm just hoping some development comes along for the VK700 G Pad 10.1, at least a TWRP or CWM release.
Click to expand...
Click to collapse
Thanks for your response, I have unfortunately tried that too and wipe cache, reset , all back to fastboot. I figured it would be impossible without a pc. Oh yea my stock recovery says modified in the top left corner, but anyway I can get access to a PC But honestly it's been awhile since I even needed to use one and don't know exactly where to start, like navigating around, and how to install what software on the pc. I can't find anyone that will walk me through it locally or online and every tutorial I find is missing some lil step I need. I know Android in detail but after basic root my experience hits a brick wall. I'm capable of more jus got to get broke in on a pc again. Now I only care to root for stuff like freezing apps, gesture control, and really want to use any app in dual window. Ain't screwing with any system tweaks again it was pointless lol I guess I need all the right files and hit up the pc...can't really do worse no??
Sent from my VS986 using Tapatalk
JRSwole said:
If you are stuck in this particular Fastboot loop without a computer I am afraid your options are going to be very limited. The only thing I can imagine that you would be able to try is restarting the tablet while holding down the Power + Volume Down keys to access the stock System recovery menu. You can try to use Factory data reset and Wipe cache to see if that can resolve the issue, but for me every attempt to perform actions from this menu brought me right back to the Fastboot screen. The only other way I could communicate to the device in this scenario was using command line, and even then I could only access fastboot and not abd.
I would highly advise getting at least a cheap older laptop with Windows if you plan on rooting any device, otherwise the dangers will far outweigh the benefits. I'm just hoping some development comes along for the VK700 G Pad 10.1, at least a TWRP or CWM release.
Click to expand...
Click to collapse
Oh yea I almost forgot I got side tracked earlier. I know there is already a twrp, I have 2 versions (2.8...something and the next version strait off twrp site. I was the one guy it wouldn't flash through flashify for but others claimed it did. God knows really, but I'm gonna wait till I have a PC of my own before I touch my g4 but man the ability to open any app in dual window is just too damn sweet...if I could only change that one word on build prop to false without all the other hassle
Sent from my VS986 using Tapatalk
JRSwole said:
Now, if you are stuck in a Fastboot loop as I was, I ended up having to restart the device while holding down the Power + Volume UP & DOWN. This brought up a screen displaying a bar code and the device MSN and IMEI number. Using this number return to the LG Mobile Support tool and select Options>Upgrade Recovery. Even if your device is already plugged in via USB, the software will not recognize the device -- you may want to double check to make sure your device drivers were installed prior to this step. Input your IMEI number into the box and restart the device in to download mode. It took a few attempts due to the quick action of Fastboot, but I was finally able to access the menu while USB was plugged in to the device and restarting while holding the Volume + key. Now you can continue with the installation and you will be back into your tablet in no time.
Click to expand...
Click to collapse
I tried following your recommendation, but the LGMobile Support Tool said the device wasn't plugged in no matter which combination of buttons I pushed while running the Upgrade Recovery option, and I wasn't able to figure out how to get to download mode either.
gnomesinrome said:
I tried following your recommendation, but the LGMobile Support Tool said the device wasn't plugged in no matter which combination of buttons I pushed while running the Upgrade Recovery option, and I wasn't able to figure out how to get to download mode either.
Click to expand...
Click to collapse
If your problem is from an OTA failing due to taking it while modded and you can get to fastboot the following command might fix it:
Code:
fastboot erase cache
That will delete the OTA zip and break the bootloop.
Hi! I'll try to make this short.
My M9 recently died and refused to turn back on for at least a couple of days. Suddenly, it decided to start booting automatically and directly into download mode (no idea how or why this started when it did). While it's in download mode, neither of the volume buttons has any function; only the power button will select the top option. I was trying to figure this out when I came across a thread on another forum somewhere online which made me think that my problem might somehow be related to the charging logic. However, I can't reset the charging logic (which I believe would be by holding all three buttons for 2 minutes) because the phone will not stay off whenever its battery is holding a charge. The only other thing I can do is to boot into the bootloader. However, the unusual button functionality is different in the bootloader; volume up moves the selection up, volume down does nothing, and the power button moves the selection down. I am able to boot the phone into safe mode from the bootloader if I use fastboot (>fastboot continue), but I can only boot into safe mode and so obviously the phone's functionality is still very limited.
I'm not really sure what could be causing this behavior. It's been some time since I've modified the system software (several months since I've modified the actual system software, even still only a couple of months since I last installed an ordinary app). I've tried connecting a new battery with no luck. I would like to just do a NAND dump and then possibly move on from the M9, but I can't boot into recovery mode, I can't use any third party apps, and I can't use adb because, for some reason, I can't enable USB debugging (must be a part of safe mode).
I appreciate any advice you can offer in advance. Even if all you can say is "it's probably just broken, no luck," that's cool with me. I would really just like to know what's going on and if possible, ideally fix it or at least somehow do a NAND backup, but I've exhausted all of the options that I'm aware of for now.
Thanks,
PersonTheCat
Himaul
Cyanogenmod 13.0 (Yes, I know it's deprecated. Too lazy!)
TWRP 3.1.1-0
Did you replace the battery after this behaviour started occurring? Or did you do it earlier?
I'm really anxious and nervous about this so I'll simplify this as much as I can; recently my phone was turned on on top of my desk and randomly restarted. I thought little of it, as it quickly went through the OnePlus logo (it began to take longer the second time I restarted it) and Android splash screen, but then stopped on the circles animation and remained looping there. I have very important data on it that I'd like to recover and WILL NOT factory reset (flash) my phone.
The battery icon and percentage still show up when I plug in the device. I still have access to Recovery Mode, Fastboot, and Sideload through their key shortcuts. I previously had USB Debugging enabled but can't authorize ADB since I can't check the confirmation dialogue box (shows up as "unauthorized" in command prompt). I had very little storage (less than 250mB) for the last few days. I don't have root access, custom recovery, or an unlocked bootloader.
I already tried clearing my cache; if I restart after doing so it only takes a few seconds to pass the OnePlus logo as opposed to the ~20 seconds it previously took. This delay raises every few restarts. I've tried waiting many hours to see if anything would happen or if ADB would start functioning. I also tried fully draining my battery overnight and nothing happened. My files are not deleted/fully corrupt since I could still see them when flashing through internal storage from Recovery Mode. OnePlus chat support said I have to flash my phone and Twitter support refused to respond. Local data recovery centers said I could get my phone shipped to them for a free diagnostic, should I do so or is there a way to unbrick or recover my data at home?
Is there anything I can do? Thank you very much!... for now I'll just remain depressed...
TL;DR - My phone's stuck at the circles boot animation and I want to recover my files or fix the soft-brick without resetting. I don't have root access, custom recovery, or an unlocked bootloader.
UPDATE: I boot into Recovery Mode and "Reset System Settings"- my phone rebooted with 112 gigabytes of storage already taken up and all of my Android/data folders empty! I lost very little as I set my save folders to other locations! It looks like the error was not having enough storage! OnePlus chat support said that I had to factory reset my phone, DO NOT listen to them! MY PHONE IS UNBRICKED!
Check out other responses:
https://www.reddit.com/r/Oneplus5T/comments/ahfabg/data_recovery_for_softbricked_oneplus_5t/
https://forums.oneplus.com/threads/data-recovery-for-soft-bricked-oneplus-5t.986096
Hi to all, yesterday I tried to root my phone following a guide here on XDA Developers (I don't remember which one). I have a Pixel 6 Pro and I tried to flash boot.img when the phone, after being restarted, starts to bootloop and then I try to turn it off. Then, the panic. The phone doesn't seem to be recognizable by ADB nor fastboot and the screen is permanently black. When I try to hold Power button and other combinations (while plugged to my PC) Windows emits some system sounds like "plugged" or "unplugged device" but I can't find my phone like recognizable.
Phone isn't hardbricked, but softbricked.
Re-flash Stock ROM.
xXx yYy said:
Phone isn't hardbricked, but softbricked.
Re-flash Stock ROM.
Click to expand...
Click to collapse
I can't interact with phone, I just see "Pixel ROM Recovery" on devices when I connect to my PC. I don't even know if it's in recovery, if it's on or off
You might be better off if this thread was moved to the Pixel 6 Pro forum -- I can move this if you request.
But determining if you can get into Fastboot/Bootloader Mode will determine whether this is soft-bricked or not; whether this is recoverable on your end or you'll have to bring it to Google/repair shop. At this point, the only way to get into that mode is through the button combinations -- I've seen some instances where user had to hold the button combination for 1-2 minutes before it popped up; and obviously the device will need to have sufficient battery charge...
simplepinoi177 said:
You might be better off if this thread was moved to the Pixel 6 Pro forum -- I can move this if you request.
But determining if you can get into Fastboot/Bootloader Mode will determine whether this is soft-bricked or not; whether this is recoverable on your end or you'll have to bring it to Google/repair shop. At this point, the only way to get into that mode is through the button combinations -- I've seen some instances where user had to hold the button combination for 1-2 minutes before it popped up; and obviously the device will need to have sufficient battery charge...
Click to expand...
Click to collapse
If you could move it to Pixel 6 Pro forum I'd be grateful, btw idk if I can reboot into bootloader. In fact I would like to know if I can. I tried to read this https://forum.xda-developers.com/t/...evices-with-deleted-bootloader-sboot.3573865/ but I can't understand many things. So if you know how to repair it, I would be very grateful
Chexet48 said:
If you could move it to Pixel 6 Pro forum I'd be grateful, btw idk if I can reboot into bootloader. In fact I would like to know if I can. I tried to read this https://forum.xda-developers.com/t/...evices-with-deleted-bootloader-sboot.3573865/ but I can't understand many things. So if you know how to repair it, I would be very grateful
Click to expand...
Click to collapse
First and foremost is seeing if you can get to Fastboot/Bootloader Mode; When your device is off and not connected to anything (at all, no cord connecting to PC or power plug or anything), hold the Power & Volume+Down buttons simultaneously for up to 2 minutes. If you cannot power on into this mode, you will not be able to flash your device's stock firmware to re-establish any system data that may have been corrupted. It is unlikely, but you may have other options if you can boot into Recovery Mode or somehow into the OS, but if you cannot get into Fastboot Mode, it is too unlikely that you would be able to boot into these. But if you are successful into loading Bootloader/Fastboot Mode...
There's two ways i would suggest you go about it...The first and easiest is to run the official Google Android Flash Tool -- You should be able to load up the latest factory firmware version for your device (Raven), and it should be able to flash the factory image onto your phone to get it working; BE SURE to check the "keep data" (or do not wipe; I can't recall off the top of my head) and to flash to both slots (just to be safe). The second way is to follow THIS GUIDE (as directed by roirraW "edor" ehT's Pixel 6 Pro guide who holds the defacto quintessential central guide in the Pixel 7 Pro forum in which is most up to date, but not catered to "raven") -- specifically you will find what is needed in the "Update and Root Factory Image" section; play close attention to the method using the "flash-all.bat" as that is the simplest and most straightforward way to go about it.. Please read everything and place close attention on being sure to go about it without "wiping" your device (removing the "-w" in the flash-all.bat file), else if you are able to recover your system, your data will not be there when coming back to it and everything would be factory reset.