Guys,
I need help, I was upgraded to Redmi 6 pro for the miui 10, but when I did an update the phone did not start the system and hence I can not find a solution to install a new system. I have tried some methods because I can not separate the OEM to use Miflash.
Help me please !!!
napoleoncm said:
Guys,
I need help, I was upgraded to Redmi 6 pro for the miui 10, but when I did an update the phone did not start the system and hence I can not find a solution to install a new system. I have tried some methods because I can not separate the OEM to use Miflash.
Help me please !!!
Click to expand...
Click to collapse
Have you tried to enter fastboot and flash than with miflash?
Another thing you can try is to enter stock recovery and do a wipe.
Redmi 6 pro Bricked
TJ1999 said:
Have you tried to enter fastboot and flash than with miflash?
Another thing you can try is to enter stock recovery and do a wipe.
Click to expand...
Click to collapse
I already tried to perform a wipe, but it is still in looping, when I try to use Miflash it has a "erase boot error"
Then you need to enter edl mode.
If your Bootloader is locked you have to use the testpoint Methode:
https://forum.xda-developers.com/showpost.php?p=77709470&postcount=3
Testpoint EDL mode also wont work.
Need EDL Flash permission from the Xiaomi, which they wont give..
My device is in bricked state for the last 10 days.
Better visit your nearest Service point ..
First, sorry for my english because I'm spanish.
I updated my Xiaomi Redmi 6 pro to MIUI 10 because an OTA update. The process failed and the mobile stay in recovery mode.
I can access to the fastboot mode and EDL mode. But I always find two errors:
- I need an authorized account that I couldn't get because I can't turn on the mobile to apply for it.
- I need an unlock bootloader and for the same reasons of before, I couldn't get it.
Are any solution for this?
Thank you
same happen to me
Hello
In EDL mode
flash stock fastboot rom with Xiaomi MiFlash
hello, my mi6 suddenly dead, hard brick, can't enter to fastboot mode. Mi6 6/128 ceramic edition.
so i decided to open back covers and shortlink 2 pins it detect as qualcomm loader in mi flash, but when flashing fastboot rom it always show error " set boot partition 1 failed "
i tried many version of mi flash and use global stable, global dev, china stable, china dev fastboot rom but always ended in set boot partition failed..
i've searching lots of forum but can't found an answer for set boot partition failed error.
i also tried QPST for flashing with fastboot rom but also give error,
please help anyone have same problem with me? or any xiaomi engineer here? i just need how to solve flashing in mi flash with error set boot partition failed.
i hope no need to change/replace the hardware...
You can try to use XiaomiTool and flash your phone with instead.
https://www.xiaomitool.com/V2/
Also, have you tried fastboot boot recovery.img
To see if you can boot TWRP or something?
(fastboot boot might work better than flashing)
I don't have any experience with Miflash, so can't offer any advice on that.
Personally I would try fastboot boot first, since XiaomiTool is in alfa-version.
-Zteam- said:
You can try to use XiaomiTool and flash your phone with instead.
https://www.xiaomitool.com/V2/
Also, have you tried fastboot boot recovery.img
To see if you can boot TWRP or something?
(fastboot boot might work better than flashing)
I don't have any experience with Miflash, so can't offer any advice on that.
Personally I would try fastboot boot first, since XiaomiTool is in alfa-version.
Click to expand...
Click to collapse
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
zilan said:
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
Click to expand...
Click to collapse
it seems your Mi6 is alive again how was the solution?
DJ Regino said:
it seems your Mi6 is alive again how was the solution?
Click to expand...
Click to collapse
no , still dead.. :crying:
look into https://stackoverflow.com/questions/39906951/android-edl-mode-commands
zilan said:
thanks for replying.. my phone is dead can't boot to fastboot. only detect in edl mode. i think its problem with my partition being messed up (look from mi flash logs)
anyway i have tried to install xiaomitool v2 but i think it's not compatible yet with unbrick device it show error like this:
Click to expand...
Click to collapse
Sorry for my late reply, I had forgotten to answer this earlier, did you try to perform a regular flash (not bricked option) from XiaomiTool. if that doesn't work either, maybe you should ask the developer of XiaomiTool2 for hints.
Try mipcsuite chiese version, i saved my Mi6 when it showed penguin in the middle of screen, no fastboot nor recovery etc
HTCDevil said:
Try mipcsuite chiese version, i saved my Mi6 when it showed penguin in the middle of screen, no fastboot nor recovery etc
Click to expand...
Click to collapse
do you have a link? and what rom to use?
zilan said:
do you have a link? and what rom to use?
Click to expand...
Click to collapse
Is there any update? Did your phone recovered from that situation?
I am in the same situation with my Asus Rog 2. It has life sign only in edl mode and when I try to recover I ve got that error too "set boot partition failed" still dead.
zenhex said:
I am in the same situation with my Asus Rog 2. It has life sign only in edl mode and when I try to recover I ve got that error too "set boot partition failed" still dead.
Click to expand...
Click to collapse
u fix it?
zilan said:
hello, my mi6 suddenly dead, hard brick, can't enter to fastboot mode. Mi6 6/128 ceramic edition.
so i decided to open back covers and shortlink 2 pins it detect as qualcomm loader in mi flash, but when flashing fastboot rom it always show error " set boot partition 1 failed "
i tried many version of mi flash and use global stable, global dev, china stable, china dev fastboot rom but always ended in set boot partition failed..
i've searching lots of forum but can't found an answer for set boot partition failed error.
i also tried QPST for flashing with fastboot rom but also give error,
please help anyone have same problem with me? or any xiaomi engineer here? i just need how to solve flashing in mi flash with error set boot partition failed.
i hope no need to change/replace the hardware...
Click to expand...
Click to collapse
if you're still there, i resolve this issue.
you need to jump charge your battery using external charger ( external charger jumped wire direct on your battery). maybe for 30mins.
then try again to charge your phone, if it reapond and have display 0% battery, let it charge for atleast 50% then power ON.
If it stucks on logo.. do reflash.
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
HEllo could help my on teamviewer?
seser111 said:
HEllo could help my on teamviewer?
Click to expand...
Click to collapse
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
djgilquirino said:
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
Click to expand...
Click to collapse
It's hard bricked. I tried sp flash tool it requires authorized account.
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
TheMalachite said:
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
Click to expand...
Click to collapse
That's the problem. I didn't know why I bricked my phone while flashing A9. It just didn't boot after rebooting my phone. I think as long as you flashed A9, you can proceed to flash the preloader and lk and unbrick it.
Same pproblem
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
I have same problem like you. How did you flash when your RM8P is hard brick? I try same things like youtube, but my cmd windows just close immediately. And if I move fastboot tool in the rom folder, cmd window didn't close but doing nothing. How did you do that?
My RN8P don't have recovery or fastboot.
thanks
thank you very much, my phone is resurrected. ?❤
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Benedict Cumberbatch said:
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Click to expand...
Click to collapse
Well I pointed out that it was just a possible way and not an absolute way on unbricking my phone. And I guess you're right about my phone being softbricked and I apologize for that mistake. Cheers
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
In soft bricks, you can access recovery or fastboot or both, and easily flash the stock ROM, but you have mentioned above that your phone was hard bricked, there is almost no way to unbrick a hard bricked RN8P without authorized account, even if you do, its very likely it was once in a million chance that it got flashed, best way to recover a hard bricked RN8P is to not mess it up more and take it to service center right away.
Help please!!
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond. :crying::crying:
---------- Post added at 12:50 PM ---------- Previous post was at 12:37 PM ----------
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Hey, my redmi 4a is soft bricked, please guide me how to fix it. I'm like a noob, so i need A to Z guide
Hey my
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
Hey, my redmi 4a is soft brick,
Can you guide me from beginning?
megaros said:
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Click to expand...
Click to collapse
Would you be so kind as to maybe PM that # to me? Ive been trying to get mine unbricked for probably over a year now and havent had any luck even finding a place or person to do the unlock.... I would really appreciate it...
U mnie zadziałał ten sposób
.
namurnik said:
U mnie zadziałał ten sposób
.
Click to expand...
Click to collapse
No widze ze dobrze to wyglada , powiedz mi tylko czy miales naprawde HARDBRICK , czy tylko SOFTBRICK , ?
Well I see it looks good, just tell me if you had a really HARDBRICK or just a SOFTBRICK?
I have a Redmi 8 Olive phone that's been bricked after trying to reinstall the stock ROM back on the phone, turns out I skrewed up and install the ROM from the incorrect region and now its stuck on recovery mode with the message in red "This MIUI version cannot be installed on this device" and on top of that the bootloader is locked and my MI Account is wiped along with everything else from the phone storage
I've Tried MiFlash, QFil, MiUnlock to try and make some progress but unable to. And sadly there's no way to get USB debugging through fastboot. Is there any way I could get assistance with my issue. Thanks a million in advance
Joelblue17 said:
I have a Redmi 8 Olive
Click to expand...
Click to collapse
Wrong forum !
use this