Related
Work only on Oreo 8
You must be Stat Normal
Oem Unlocked
Enable USB Debugging Mode and OEM Unlock in your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy J7 Duo.
Download and install the Samsung USB driver to your computer system.
Also, download the ODIN software. Select above Oreo version in the ODIN list. Install ODIN in your PC.
Download Magisk.Zip (Download Latest version) and forced encryption disabler, Copy it to Your Phone Memory. We Need to flash encryption disabler to avoid Boot Warnings in the future after the Root process.
Download and save the TWRP File. Select Correct TWRP file from Below. This TWRPs can support Up to Oreo.
SM-J720F
SM-J720M
Flash TWRP using ODIN
Samsung Galaxy J7 Duo Download Mode
Connect your USB Cable with PC. Switch off your device. Then, enter into Download mode. To do this; press and hold down the Volume Down + Home + Power buttons and connect your micro USB Cable.
Samsung Galaxy J7 Duo Download Mode Warning Screen
Press the Volume Up button to continue when you see the warning message.
Now, connect the Samsung Galaxy J7 Duo mobile to the computer via USB cable.
Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!
ODIN Added Message
However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is reasonable and reconnect the device.
After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and tick the Auto Reboot.
Odin Auto Reboot
Click on “Start”
Once the file is loaded into the device, reboot your device.
Kudos, you have just Installed the TWRP on your Samsung Galaxy J7 Duo. If you installed TWRP, Don’t turn on your mobile. Immediately, move to Magisk Installation steps.
You should not Boot into Normal OS Booting, after TWRP. After TWRP Flash, Immediately Boot into Recovery or twrp will gone
Boot it Into recovery mode->Volume Up + Power Button.+Home
Now it Will Boot into TWRP Recovery Mode.
Install Magisk, forced encryption disabler in your Samsung Galaxy J7 Duo using TWRP
Select Wipe->Advance Wipe->Select Cache Data.
Return to Home of TWRP select Install.
Select Magisk.Zip.
After Installation again Navigate to Home select Install. Select forced encryption disabler.
After the Installation Reboot Your Mobile.
You can also install Magisk.apk in your Mobile Applications. Forced encryption disabler is used to avoid the boot loop issue after rooting.
enjoy
SM-J720F
SM-J720M
encryption disabler
Samy6699 said:
Work only on Oreo 8
SM-J720F
SM-J720M
enjoy
SM-J720F
SM-J720M
encryption disabler
Click to expand...
Click to collapse
Can it be used on the Dual-Sim version SM-J720F/DS released in 04/2018 ?
Can i install it on Galaxy J7 Duo running Android pie
Nitin devarasetty said:
Can i install it on Galaxy J7 Duo running Android pie
Click to expand...
Click to collapse
i also need that man.
Please make one thing clear
Do we have to turn off "Auto reboot"
Or keep the "Auto reboot" option checked on?
Android 9.0
Hello, when it will be possible ? If never, why ?
I followed the exact process but everytime i tried to boot into TWRP recovery immediately after the flashing, the device still boots into stock recovery instead of TWRP
Please help me with this
Thank you
I figured out a way to root the Galaxy J7 duo
Actually i have tried lot of ways to root using TWRP flash and all.. but one day i accidentally bricked my device
So i downloaded the stock ROM to flash my device
And i downloaded the 8.0 android ROM
So this root method basically tested on android 8.0
So now i have android 8.0 stock ROM downloaded
Step 1 -
So make sure you also downloaded the ROM
And extract the ROM file (you must have got the "AP" "CP" "BL" "CSC" and "HOME CSC" file)
Then copy the "AP" file in your phone
Then install magisk manager in your phone
Open magisk, select install, select and patch a file from magisk
Then select "AP" file
And wait while magisk is patching the "AP" file
When flashing is done the patched file will be saved on storage, emulated, 0, download (file will be saved as "magisk_patched.tar")
Then simply copy the patched file in your computer
Step 2 -
Open odin in your Computer
In odin, select "magisk_patched.tar" in "AP" section
Select "BL" from the stock ROM folder in the odin's "BL" section
Select "CP" from the stock ROM folder in the odin's "CP" section
Select "HOME CSC" from the stock ROM folder in the odin's "HOME CSC" section
make sure you select all the official files from the stock ROM folder... just instead of the "AP" file, select the "magisk_patched.tar"
Then connect your phone via USB cable
Odin will detect and show "added" message
Start the flashing process
It will take few minutes
When its done your phone will boot up
But it will show something like "erasing" and "verification unsuccessful"
Just agree with that and erase the phone
(It will cause a data loss because everything will be deleted and your phone will reset, so i suggest to make a backup using samsung smart switch)
Then when your phone will reboot, just follow the steps to setup
Amd install magisk latest apk
Open magisk and boom!
You can already realize that magisk root is activated
Amd magisk will ask you to "setup environment"
Just agree and your phone will reboot withing 5 seconds
And done!
Your phone is now rooted
Install root checker and verify your root status
how to un-brick
Same thing here,
Tell me how you un-bricked your phone
I bricked my phone by installing wrong twrp file to sm-j720f android pie with odin
and now it shows only bootloader screen and I can't even go to recovery mode or home screen just showing " SAMSUNG GALAXY J7 DUO secured by Knox powerd by android" noting else
That is exactly what was happened in my phone
So what i did just downloaded the Stock ROM for J7 duo from the sam mobile website.
Then extract the ROM and you will get few files ("AP", "BL", "CP", "CSC", "HOME CSC")
Then boot your phone into download mode using this method
(Connect the phone to your PC using USB cable, then press and hold Power + volume down + home, then when the "powered by android" logo appears release only the power button... so your phone will boot into download mode, press volume up to continue)
Now, in odin you can see "added" message that means device is connected
Now select the ROM files respectively, BL, AP, CP, CSC
Then click start, and the process will start, will take few minutes
When done, your phone will boot normally
Yeah everything is right until...
[grand_theft;83142325]That is exactly what was happened in my phone
***********
So what i did just downloaded the Stock ROM for J7 duo from the sam mobile website.
Then extract the ROM and you will get few files ("AP", "BL", "CP", "CSC", "HOME CSC") *********
Then boot your phone into download mode using this method
Fact that I cant even go to download mode I tried out many times
Just follow this step
(Connect your computer with your phone using USB cable, then press and hold Power + volume down + home, then when the phone vibrates and appears the samsung logo again just release only the power key, while holding the volume down and home key)
(Just release only the power key when the "powered by android" logo appears)
Thats how you can go to the download mode
No virtual change
Done it as u say,
But my mobile shows noting but just logo screen
*****SAMSUNG GALAXY J7 DUO secured by Knox powered by android*****
again and again
These is not first time, last I did the same mistake before and I went to Samsung service store they recovered it, I don't know how they did but it worked.
These time I want to (tring to) do it on my own bcoz I love playing with ROM's, root, etc.
Thanks for replys
I also did the same mistake by flashing wrong TWRP
But however i managed to enter into downlod mode following those steps
And flashed official ROM to unbrick the phone
You must go into download mode to flash the official ROM using odin
Thanks alot
Thanks man,
I'm able to enter download mode and I installed official ROM. Now in using it as normal but (1)Secure folder and Pay mini are not working.
(2)Do you have any idea on other ROMs that works on SM-J720F other than Samsung's one UI.
(3)can I install android 8 on it in ordered to root as you said it in previous post.
(4)from previous your post on oreo twrp explanation, is twrp works fine. What happens to twrp if I update phone to Q (from system updater)
I'm glad you made it!
Now,
1) Secure folder and pay mini won't work because the phone thinks you rooted your phone and maybe your binary is cracked (so forget using those)
2) I'm not sure about any ROMs which is stable with this model. But you can search the internet (I think pixel ROM is pretty popular)
3) I'm not sure if my process of rooting supports android 9.0 or not, because i personally tetsted it on 8.0, So you can download the oreo ROM from the internet and then follow all the steps i mentioned before
4) If you want to install TWRP, you can still install TWRP after rooting via the method i provided
(You can install TWRP using flashify on a rooted phone)
But if you want root access then you can simply root your phone first..
And whatever custom ROMs you want to install, install it using flashify
Because if you update software via official OTA, the root access and TWRP both will be gone
And if you root your phone, then however you won't be able to perform a official OTA update.
(First root your phone, then simply download your TWRP file and flash it with root permission within your phone)
Instated of Oreo AP file,
grand_theft said:
I figured out a way to root the Galaxy J7 duo
Actually i have tried lot of ways to root using TWRP flash and all.. but one day i accidentally bricked my device
So i downloaded the stock ROM to flash my device
And i downloaded the 8.0 android ROM
So this root method basically tested on android 8.0
So now i have android 8.0 stock ROM downloaded
Step 1 -
So make sure you also downloaded the ROM
And extract the ROM file (you must have got the "AP" "CP" "BL" "CSC" and "HOME CSC" file)
Then copy the "AP" file in your phone
Then install magisk manager in your phone
Open magisk, select install, select and patch a file from magisk
Then select "AP" file
And wait while magisk is patching the "AP" file
When flashing is done the patched file will be saved on storage, emulated, 0, download (file will be saved as "magisk_patched.tar")
Then simply copy the patched file in your computer
Step 2 -
Open odin in your Computer
In odin, select "magisk_patched.tar" in "AP" section
Select "BL" from the stock ROM folder in the odin's "BL" section
Select "CP" from the stock ROM folder in the odin's "CP" section
Select "HOME CSC" from the stock ROM folder in the odin's "HOME CSC" section
make sure you select all the official files from the stock ROM folder... just instead of the "AP" file, select the "magisk_patched.tar"
Then connect your phone via USB cable
Odin will detect and show "added" message
Start the flashing process
It will take few minutes
When its done your phone will boot up
But it will show something like "erasing" and "verification unsuccessful"
Just agree with that and erase the phone
(It will cause a data loss because everything will be deleted and your phone will reset, so i suggest to make a backup using samsung smart switch)
Then when your phone will reboot, just follow the steps to setup
Amd install magisk latest apk
Open magisk and boom!
You can already realize that magisk root is activated
Amd magisk will ask you to "setup environment"
Just agree and your phone will reboot withing 5 seconds
And done!
Your phone is now rooted
Install root checker and verify your root status
Click to expand...
Click to collapse
************************************************************************************************************************************************************************************************************************************************************************************************************
Ok I agree with you,
But what if I replace Oreo's AP file with android 10's AP file(which I installed recently on my phone), will it boot with root or not.
************************************************************************************************************************************************************************************************************************************************************************************************************
I have not tested this method on any other android version, you can still try it on your own, there is nothing to lose, just make a backup before flashing. If you succeed then that's great
But i have personally tested this method only on android 8.0
(Before doing anything, just make a proper backup using samsung smart switch. So you can restore your important data)
Success
Replaced with android 10's AP file and flashed with Odin. Now my phone has rooted with Magisk manager.
Any suggestions to tweak android
Claudio4780 said:
Can it be used on the Dual-Sim version SM-J720F/DS released in 04/2018 ?
Click to expand...
Click to collapse
Have you ever got the answer or figured it out? I've got the same model and I cannot find anything on the net to help me with rooting this phone.
Latest recommended firmware for latest update faster: (Updated weekly).https://samfrew.com/model/SM-A715F/region/SEK/
WARNING: You can't downgrade anymore once you flashed U2 update !
You will need:
-Odin v3.14.1
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
-Galaxy A71 Latest USB Driver
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
You want to download latest firmware directly from server? (fast download)
Samfirm 0.4.1 or Frija 1.4.2
https://samfirmtool.com/samfirm-v0-4-1
https://github.com/wssyncmldm/frija/releases
Frija not working ? install both vcredist_x00 for your device !
(Check your windows settings to know which version to install).
(Microsoft Visual C++ 2010 Redistributable Package) and (Microsoft Visual C++ 2008 Redistributable Package)
-https://www.microsoft.com/en-US/download/details.aspx?id=29 (x86) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=5555 (x86) 2010
-https://www.microsoft.com/en-US/download/details.aspx?id=15336 (64bit) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=14632 (64bit) 2010
-Open Frija and type in your model (mine is SM-A715F) and your CSC : (mine is LUX).
(All CSC's and models on Samfrew: https://samfrew.com/model/SM-A715F/).
-Download and extract SM-A715XX_1_00000000000000_xxxxxxxxxx_fac.zip
On your device:
If you want to unlock bootloader:
-Go to Settings then to About phone and find your build number.
-Tap on your build number 6 times until you see “You’re now a developer”.
-Go in Developer options > enable OEM unlocking.
-Connect the device to your PC.
-Power off your device with POWER and volume DOWN and directly hold volume UP and DOWN together!
-Device will boot in DOWNLOAD MODE.
-Long press volume UP to unlock the bootloader. This will wipe your data and automatically reboot your device!
If you dont want to unlock bootloader:.
-Download and extract Odin and open it as administrator.
Still in DOWNLOAD MODE:
-Click on BL and select BL_A715FXXXU1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on AP and select AP_A715FXXXU1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
-Click on CP and select CP_A715FXXXU1AXXX_CP14483800_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_OXM_A715FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_OXM_A715FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on START and wait for installation, when done you can unplug your device.
ROOTYour KNOX status will be tripped if you follow this tutorial...What's knox ? : https://www.google.com/search?q=samsung+knox+explained
-Download the latest stock firmware for your Samsung Galaxy A71 with Samfirm/Frija app (faster) or Samfrew/Sammobile website (way slower).
https://samfrew.com/model/SM-A715F/
-Extract the SM-A715XX_1_EXAMPLE_0000000000_fac.zip file with 7zip or any other unzipper.
-Copy the (AP_A715XXXXU1XXXX_CL00000000_QB00000000_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5) file and transfer it to your internal storage.
-Download and install Magisk Manager APK https://github.com/topjohnwu/Magisk/releases/download/manager-v7.5.1/MagiskManager-v7.5.1.apk
-Open Magisk Manager and go to Install > Install > Select and Patch a file.
-Navigate through the storage and select the extracted AP file.
The firmware will be patched and will be found in Internal Storage/Download/magisk_patched.tar.
-Transfer the patched file to your PC.
-Turn OFF your device and boot into DOWNLOAD MODE.
-In Odin, click on AP and select the patched tar file, Uncheck “Auto Reboot” and click on Install.
The tool will flash Magisk V20 on your Samsung Galaxy A71.
To boot in recovery or boot the system with Magisk installed:
1. Powering up normally → System without Magisk
2. Power + Volume Up → Bootloader warning → Release all buttons → System with Magisk
3. Power + Volume Up → Bootloader warning → Keep holding volume up → Actual recovery
Discord A series group to help users:
https://discord.gg/xrnrU8k
Don't need to dowload theses files if you don't know their purposes.
A71_EUR_OPEN.pit
https://mega.nz/#!Z1BRVQIZ!j3EkHOBbp7--iUAgZ2T56iBMzZMtKZoh17lphPqugtc
Combination firmwares:
COMBINATION_FAC_FAQ0_A715FXXU1ATA1
https://androidfilehost.com/?fid=4349826312261713325
COMBINATION_FAC_FAQ0_A715FXXU1ATA2
https://androidfilehost.com/?fid=4349826312261713327
Finally a reason to actually buy this phone, thank you
@BK☑️
Thanks for the share, would be appreciated if you can mention how to update over OTA when we have root the phone. Thanks.
Cuvillier said:
@BK
Thanks for the share, would be appreciated if you can mention how to update over OTA when we have root the phone. Thanks.
Click to expand...
Click to collapse
The reason it's not mentionned is simply because we can't, we just need to download latest firmware and patch it with magisk.
topjohnwu stated ( and i tested it myself ) that if we flash the latest OTA it will brick the device, which is logic.
We need to patch the latest firmware with magisk, if we go from a rooted environment to a non rooted it will brick.
I hope i cleared your thoughs.
BK said:
The reason it's not mentionned is simply because we can't, we just need to download latest firmware and patch it with magisk.
topjohnwu stated ( and i tested it myself ) that if we flash the latest OTA it will brick the device, which is logic.
We need to patch the latest firmware with magisk, if we go from a rooted environment to a non rooted it will brick.
I hope i cleared your thoughs.
Click to expand...
Click to collapse
Okay, so let's say if i get new OTA push notification, i download it first online and then i follow your root tutorial to update it with magisk included?
Cuvillier said:
Okay, so let's say if i get new OTA push notification, i download it first online and then i follow your root tutorial to update it with magisk included?
Click to expand...
Click to collapse
exactly, download the needed firmware and extract the AP file and put it in the download folder on your A71 device, then patch it to obtain a magisk_patched.tar file to flash in odin.
BK said:
exactly, download the needed firmware and extract the AP file and put it in the download folder on your A71 device, then patch it to obtain a magisk_patched.tar file to flash in odin.
Click to expand...
Click to collapse
Understood. Do you know if it will be possible to install twrp too ?
Cuvillier said:
Understood. Do you know if it will be possible to install twrp too ?
Click to expand...
Click to collapse
twrp is compatible, ask the developers of theses devices to build twrp for the a71 :
(the Galaxy A71 have the same Soc has theses devices)
(Snapdragon 730).
-Xiaomi Redmi K20
-Samsung Galaxy A80
-Poco X2
-Realme X2
-Oppo Reno 2
-Lenovo Z6
ill ask samsung open source release center to provide the source code for this device. (i'm an A70 user not A71).
edit: the source code will be released later this week.
edit2: source code is released. (18/02/2020)
BK said:
twrp is compatible, ask the developers of theses devices to build twrp for the a71 :
(the Galaxy A71 have the same Soc has theses devices)
(Snapdragon 730).
-Xiaomi Redmi K20
-Samsung Galaxy A80
-Poco X2
-Realme X2
-Oppo Reno 2
-Lenovo Z6
ill ask samsung open source release center to provide the source code for this device. (i'm an A70 user not A71).
edit: the source code will be released later this week.
Click to expand...
Click to collapse
Thanks, and about unlocking bootloader, is there something I should be aware of after that ?
Cuvillier said:
Thanks, and about unlocking bootloader, is there something I should be aware of after that ?
Click to expand...
Click to collapse
just that your knox bit will be tripped (0x1).
BK said:
just that your knox bit will be tripped (0x1).
Click to expand...
Click to collapse
Thank you, and got another question (sorry ), on your booting instructions, you say that to boot using using magisk we need to press vol+ and power, but will that be possible to boot as usual with power button and boot with magisk by default ?
Cuvillier said:
Thank you, and got another question (sorry ), on your booting instructions, you say that to boot using using magisk we need to press vol+ and power, but will that be possible to boot as usual with power button and boot with magisk by default ?
Click to expand...
Click to collapse
once twrp is released yes (if someone port it).
there is another method but that's another story.
BK said:
once twrp is released yes (if someone port it).
there is another method but that's another story.
Click to expand...
Click to collapse
Thanks, and about the root, if i understood, that way we can flash magisk without need to unlock bootloader ?
Cuvillier said:
Thanks, and about the root, if i understood, that way we can flash magisk without need to unlock bootloader ?
Click to expand...
Click to collapse
Nope you didn't understood, you can't root without unlocking bootloader.
It is not working
I downloaded hungarian firmware from frija, copied the AP file to my phone, patched with magisk, copied the patched file to my computer, booted my phone into download mode, flashed the ap file with odin (and yes i unchecked the auto reboot), and after it finished, I pressed the volume down and power button to reboot, and when the screen went off, I quickly changed to volume up and power button and hold until the bootloader warning appeared, and realased all buttons. After it booted, i opened magisk manager and it says magisk is not installed what can i do? ( and yes, I unlocked the bootloader)
Source code is up and can be downloaded on here! :
https://opensource.samsung.com/uploadSearch?searchValue=A715
I've tried rooting several times to no avail, I've unlocked and flashed everything with the patched magisk setup, I'm using the SM-A715F BTU firmware as that's what my phone was beforehand
When i try and do the volume up boot then release at the warning screen it just does a reboot cycle and never boots I have to force it it shut down and boot normally
I cant even restore phone to a point where SafetyNet validates so no Pokemon Go and such
can we unroot and recover the samsung knox?
Cyber Axe said:
I've tried rooting several times to no avail, I've unlocked and flashed everything with the patched magisk setup, I'm using the SM-A715F BTU firmware as that's what my phone was beforehand
When i try and do the volume up boot then release at the warning screen it just does a reboot cycle and never boots I have to force it it shut down and boot normally
I cant even restore phone to a point where SafetyNet validates so no Pokemon Go and such
Click to expand...
Click to collapse
Ok ladies and gentlemen I finally got it working, and here's what I had to do
You'll need to install 7zip or something that handles TARs and LZ4 that you can grab from github it was the second result on google for me
Once you've patched the AP file in Magisk Manager and copy it back to your pc, Open up that tar file and delete all files except recovery.img and vbmeta.img
Then open the original prepatched AP file in 7Zip and extract the boot.img.lz4 then take that file and drag it onto the lz4.exe from the lz4 utilities
you should now have a nice clean uncompressed boot.img, put that back onto the phone and patch it with magisk manager, you should now have magisk_patched.img copy that back to the pc and rename it boot.img and put it in the tar file from earlier so you should have boot.img recovery.img and vbmeta.img
With just these 3 files in the tar you dont have to worry about wiping your data again and it will patch pretty fast
Open up ODIN again and select AP and choose your new tar file and flash it
Then shut down the phone fully and power it on while holding vol up till you get to the warning screen about the unlocked bootloader let go of vol up and press power to continue and you should find that it boots properly now and magisk manager will show that magisk is installed.
Could not find a single post or website that correctly explained how to root my Samsung Galaxy A30S that I bought May 2020.
In the end I got it rooted. Here is what I did (I think have to go from memory, not going to restore my phone and try again, was in Knox jail for a week, so not risking that again).
step 0:
download Samsung kies and install
download and install Frija the Samsung Firmware download tool
download adb platform tools and install. Not strictly necessary I think but can be useful and easy way to boot into bootloader if things go wrong.
step 1:
When your phone is new:
update (or wait that the phone updates) to the latest android version
This may take a while an repeated reboots.
step 2
unlock the bootloader :
1. go to Setting>About>Software>Build Number and Tap on the build number repeatedly so that the Developer mode will turn on.
2. In the developer options, there is an OEM unlock option then enable that option.
Now Enter Download Mode Galaxy A30s:
1 Turn Power off the phone
2 Press and hold Volume Down + Volume Up keys together
3 While pressing these keys connecting the phone to PC with USB Cable Data.
4 Release all keys when Download Mode appears.
follow the instruction (ie keep the volume up button pressed for over 7 seconds)
step 3:
use the Frija tool to download samsung galaxy 30s latest firmware, the same one that is also installed on your phone
Once you’ve downloaded the stock firmware file based on your device model number, you can extract the boot.img.lz4 file to patch it via the Magisk Manager app. You do this as follows:
Step 4
Copy only the boot.img.lz4 file from the extracted AP folder to your device storage.
Install 7-Zip-Zstandard or use a windows lz4 command line tool to unpack boot.img.lz4 to boot.img
Download and install the latest Magisk Manager app and install on your phone.
Transfer the boot.img file to an SD card so Magisk can access it (or connect your phone and use file transfer)
Next, open the Magisk Manager app and select Install and choose to Install it again.
Then tap on “Patch Boot Image File”.
Go to internal storage and select your device boot image that you moved to your phone earlier.
Now, wait for Magisk to start patching the boot image.
Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and put it somewhere on your PC.
Next repack it to boot.img.lz4 using 7z or lz4 and then do it again but now pack it boot.img.lz4.tar so ODIN can write it.
step 4:
Make sure that OEM unlock is still off!
Enter Download Mode Galaxy A30s and go to download mode.
Make sure it says FRP lock and OEM lock are off.
Otherwise the ODIN write will fail and OEM/knox protection will kick in during ODIN write and it will fail.
And then you have to wait a week until OEM unlock option in developers option becomes available again.
download latest ODIN version.
Select in ODIN 'AP' and select boot.img.lz4.tar and then write it.
That should work and reboot your phone.
step 5:
you may have to install magisk on your phone again.
Start magisk and make sure magisk and magisk manager are up to date.
use the menu in the upper left corner, choose modules and install busy box.
Now install terminux on your phone and use the su command to see if you can become root.
If you type 'su' in terminux magisk window should pop up and ask if you want to grant superuser access to terminux.
Can you tell us about ur baseband version on ur devices, and could you please to share only boot image. I think so much if downloading firmware full.:fingers-crossed:
baseband: A307GDXUBTD1
boot image
drive(dot)google(dot)com/file/d/187U5hK75k4VIj5D5VlU7Zq7HpSzG8e6z/view?usp=sharing
Android security patch level: 1 March 2020
Tuyol said:
Can you tell us about ur baseband version on ur devices, and could you please to share only boot image. I think so much if downloading firmware full.:fingers-crossed:
Click to expand...
Click to collapse
how can i repack boot.img.lz4 to boot.img.lz4.tar?
i was trying to repack boot.img.lz4 to tar but it just does boot.img.lz4 to boot.img.tar
Good
Help pls
Pls someone tell me that this AP file patch correct? I am confusing bcoz of last typing
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
stylemonument said:
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
Click to expand...
Click to collapse
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Please see here: Bootloader Unlock Service For US Variants
BoiBundy said:
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Click to expand...
Click to collapse
Okay.... let me do that. Thanks.
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Msgd re: oem unlock! Btw, if we got any awesome Sam sec experts out there who wouldn’t mind entertaining some qs from me regarding a lot of WEIRD stuff happening w my phone, be eternally grateful. Could even work out a monetary deal for your time, and (perhaps) help!
Thanks much in adv, msg on telegram as @nemotheDreamer.
butchieboy said:
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
You might be right, I will edit it tonight
So we can legit root the Snapdragon version now?
Nickdroid86 said:
So we can legit root the Snapdragon version now?
Click to expand...
Click to collapse
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
cerj said:
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
Click to expand...
Click to collapse
Thanks man, wanted to have a central "fool-proof" way for people to enjoy the freedom of root
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
MonkeyJug said:
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
Click to expand...
Click to collapse
Check Here: https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/
I've been on Nexus and Pixel devices so long now I cannot remember much about modification on Samsung devices. Last one I had rooted was the Note 2. Anyway, bootloader unlocked and successfully rooted my SM-N975U (Note 10+). Now there are updates available so I am sorry if this isn't the place or if a dumb question, but is there any special way I need to do updates on the snapdragon so I don't relock the bootloader or lose root? With Pixel, ADB sideload was easy, not sure with this one.
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
nabnab25658 said:
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
Click to expand...
Click to collapse
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Dick_Stickitinski said:
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Click to expand...
Click to collapse
Hey, just wanted to thank you for pointing me in the right direction. I've had my Sm-976V BL unlocked and rooted for a bit now, but have been busy hence the late reply.
I have an issue. I boot into TWRP just fine but all my files in sdcard are nothing but random numbers and letters
I think this happens when you don't wipe your data. You also need to flash a decryption file. It happened to me at first because I didn't wipe all data.[/QUOTE]
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
which TWRP version to flash and which odin? hope i can get answer i had N975U1 unlocked bootloader
Anyone else getting that pesky "Android 11 Update" since they have rooted? I keep postponing it. I'm guessing it will fail if I try to install. Not sure what I should do.
Sammobile don't seem to have the firmware available yet. I was thinking installing it with odin then patching AP with Magisk
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
it works on my N975U1 android 10 Q version 1st method so no need 2nd method
Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
I am not responsible for bricked devices, dead SD cards although it is not really possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy Z Fold 3 and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Samsung Official Firmware
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double click open the file Bifrost.exe inside the folder.
You need to fill in the Model, Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-F926B/DS and you only need to type SM-F926B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-F926B/
You need to find find a three-letter word depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
Press Start to flash the firmware, after done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and make sure you do not sign in google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. Oh yes, in case you do not know, you need to allow the app to install apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
How to update without losing root and data
Open Odin and put the new magisk_patched file in the AP slot, the BL and CP from your new firmware into their respective slots and importantly *HOME_CSC* into the CSC slot.
Press start and let Odin do its stuff.
When flashed, do not wipe.
Press and hold Vol-down and Power
As soon as the screen appears, let go of all buttons.
Within moments, the phone with updates, data and magisk rooted will present in front of you. Hurray!
Thanks for the post I want to try it but I'm on SM-F926U also I don't want to lose any data will this erase all my data such as apps, pics etc with backup?
AnnaNguyen said:
Thanks for the post I want to try it but I'm on SM-F926U also I don't want to lose any data will this erase all my data such as apps, pics etc with backup?
Click to expand...
Click to collapse
You must lost data when you root your phone.
What you can do is using Samsung or Google backup and move your photos and files to your PC
Thank you William again I just did it and I confirm works on SM-F926U
AnnaNguyen said:
Thank you William again I just did it and I confirm works on SM-F926U
Click to expand...
Click to collapse
You are welcome
Hi i tried to root my samsung galaxy z fold 3 model F926B version android 11 i did all steps using magisk version 23.0 but after i flash the patched rom i keep getting stuck on samsung logo and error says this device version is not official is there anyway i can bypass it?
nathanalbat said:
Hi i tried to root my samsung galaxy z fold 3 model F926B version android 11 i did all steps using magisk version 23.0 but after i flash the patched rom i keep getting stuck on samsung logo and error says this device version is not official is there anyway i can bypass it?
Click to expand...
Click to collapse
Just rooted my new GZF3 SM926B/DS with this method and got to the exact same thing (but using magisk 24.1).
Re-flashed and the same thing again but it was easily fixed.
One more part should be added to the guide.
After you flash the last time with the patched AP-file and get a boot loop to recovery, do a factory reset from (stock) recovery, phone restarts and you have to set it up but magisk is there and you're rooted!
Just go to apps, try to open magisk which will tell you that you need to upgrade to full version, accept, open magisk and accept the "additional part" -> phone reboot one last time and DONE!
You now have a fully functioning and rooted GZF3
iLind said:
Just rooted my new GZF3 SM926B/DS with this method and got to the exact same thing (but using magisk 24.1).
Re-flashed and the same thing again but it was easily fixed.
One more part should be added to the guide.
After you flash the last time with the patched AP-file and get a boot loop to recovery, do a factory reset from (stock) recovery, phone restarts and you have to set it up but magisk is there and you're rooted!
Just go to apps, try to open magisk which will tell you that you need to upgrade to full version, accept, open magisk and accept the "additional part" -> phone reboot one last time and DONE!
You now have a fully functioning and rooted GZF3
Click to expand...
Click to collapse
i did same steps as you but i did it with magisk 23 and worked thanks tho
iLind said:
Just rooted my new GZF3 SM926B/DS with this method and got to the exact same thing (but using magisk 24.1).
Re-flashed and the same thing again but it was easily fixed.
One more part should be added to the guide.
After you flash the last time with the patched AP-file and get a boot loop to recovery, do a factory reset from (stock) recovery, phone restarts and you have to set it up but magisk is there and you're rooted!
Just go to apps, try to open magisk which will tell you that you need to upgrade to full version, accept, open magisk and accept the "additional part" -> phone reboot one last time and DONE!
You now have a fully functioning and rooted GZF3
Click to expand...
Click to collapse
Ah, thanks for your recommendation. I have make it in the video but I have forgotten to mention it in the guide. Sorry.
Does this solve the camera issue on fold 3?
Oracle79 said:
Does this solve the camera issue on fold 3?
Click to expand...
Click to collapse
I think the camera’s all right
Oracle79 said:
Does this solve the camera issue on fold 3?
Click to expand...
Click to collapse
Yes, no problem with the camera. Quite sure it's the OS-update that resolve the issue. So just make sure you download the latest update (BVA9) and flash that one.
AnnaNguyen said:
Thank you William again I just did it and I confirm works on SM-F926U
Click to expand...
Click to collapse
Hey There, Did the F926U have the bootloader unlock option without having to pay for it and do it remotely ?
It was unlocked I got it on galaxyfirmwares for free
Thanks for the Guide , Williamtung
I want to share me experience ( SM-F926B ), updating from a rooted VBA9 to the latest BVB3 firmware , without losing root and data !
Steps:
1. Download the latest stock F926BXXS1BVB3 ( at the time writing this post )
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
2. Patch the stock AP (BVB3) file with magisk and just follow the guide from there... , You will be updated with the latest and rooted , extremely easy !
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
pvillasuso said:
Thanks for the Guide, Williamtung
I want to share my experience ( SM-F926B ), updating from a rooted VBA9 to the latest BVB3 firmware, without losing root and data!
Steps:
1. Download the latest stock F926BXXS1BVB3 ( at the time writing this post )
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
2. Patch the stock AP (BVB3) file with magisk and just follow the guide from there..., You will be updated with the latest and rooted, extremely easy!
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Click to expand...
Click to collapse
Thanks for your sharing! I may add this useful information to the guide if you please.
Williamtung said:
Thanks for your sharing! I may add this useful information to the guide if you please.
Click to expand...
Click to collapse
Sure !! , thanks again , this is hands down , the best and easiest way to root/update keeping all your data and setup
Is there a way to Root the F926U?
About to find one.. Was wondering whether anything is possible?
JazonX said:
Is there a way to Root the F926U?
About to find one.. Was wondering whether anything is possible?
Click to expand...
Click to collapse
Not possible unless you able to unlock your bootloader
AnnaNguyen said:
Thank you William again I just did it and I confirm works on SM-F926U
Click to expand...
Click to collapse
So, you successfully unlocked your bootloader and rooted your SM-F926U?
Thanks.