Realme x3 bootloader unlock issue from so f many months i am facing not got any solution till now deep test apk not working in 2.0 it open but says no internet any in 1.0 apk workes but just reboots itself instead of going in fastboot mode plese help any one.
Related
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Good to hear you got it up and running.
derpaherp said:
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Click to expand...
Click to collapse
hey - how did you get mi unlock to work? im having this problem: mi unlock tool 2.3.803.10. it won't show the mi mix 2 as connected with xiaomi drivers, only with google drivers it will show as connected and then let me click unlock. however, it stops at 50% and shows error "couldnt verify device unkown error (-1)". ive logged on to i.mi.com and located the device through find device. does anyone have any pointers how i can unlock, because i want to switch to global dev rom and miui updater wont let me update through system with error "android version is different".
best, alastair
Hello All,
I have Honor 8 Pro from 1 year now and i have been using Custom ROMs (Thanks to the Developers here) from very long. I was using OpenKirin ROM and then when Android P was release I used FFW to get the latest one and tried to upgrade the phone (thinking that i know everything ).
And the result was catastrophic! Now my phone only boots to recovery mode and if i try to do recovery, it fails.
Current status (Attached Screenshots for reference):
Bootloader locked : says "PHONE locked"
Tried HCU: cannot see any phone info other than Serial number
I have DC-Phoenix+HCU 3 days pack. So please let me know if something can be done to revive my phone. Please let me know if someone can help.
Hi, did you recover your phone finally.? Actually mine also stuck with same problem but the only difference is my phone status shows phone BOOTLOADER Unlock, FRP - UNLOCK.
Unable to do anything but am able to flash twrp and have Access in twrp but unable to flash anything coz all partitions are deleted. Shall I keep any hopes.??
This is old but it might help.
https://forum.xda-developers.com/honor-8-pro/how-to/unbrick-device-revert-to-stock-complete-t3802298
Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!
You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot
about realme 3 charging overtime error
kprsnt said:
You should never lock your bootloader with custom recovery installed
Try unlock bootloader using fastboot
Click to expand...
Click to collapse
unale to boot into fastboot mode please give me some suggestion please
i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error
realme 3 bricked
Ibno Hamid VI said:
i have the same problem i cant go to fastboot mode and recovery mode the best to fix this to flash the stock firmware but the tools need a ID and Pass to used it.
i have realme 3 rmx1821 i tried the bypass the pass but it wont work theirs a error
Click to expand...
Click to collapse
bro tell the name of the tool
my be msmdownload tool
mfahad said:
Hello all,
Hope that everyone will be safe and healthy.
I have bricked my Realme 3 RMX1821 and would be grateful for any help to get it working back again.
Event Summary: I unlocked its bootloader with the help of Realme Tool and then installed TWRP recovery and Magisk. All worked fine. Later on due to some reasons I uninstalled Magisk and then attempted to Lock the bootloader with TWRP installed.
Immediately after the bootloader was locked my phone was rebooted and a warning screen appeared saying “Charging Overtime”. Now I tried to turn off the phone and restarted it with Volume Down button pressed. Still the same screen with an additional message in the corner saying “Recovery Mode”. Under both the cases no other button works and I have to power it off.
Support centers are all closed due to current virus issues and I need this phone really badly.
Will be grateful if someone may help me out.
Thanks!
Click to expand...
Click to collapse
Go to the Realme services center
Hello Y`all!
I need help to unlock the bootloader on this phone and i have read all of the related threads here but the links to the pages are not working anymore, i have tried everything with the new websites but still no luck to get the bootloader unlocked! Help Please
AFAIK, you don't really have to unlock the bootloader for Z2 - it won't refuse to boot if you flash something like magisk, only a warning message is shown during boot. Just use 9008 QFIL. Previously I have described about the test points and "deep flash USB cable".
Thank`s for the reply mate!
I`v managed to Unlock the bootloader few days ago by flashing a 3.5 ZUI with Mi Flash and after that with the command :
"fastboot -i 0x2b4c oem unlock-go"
This worked like a charm! It was mentioned in one of the previous thread`s but i have missed it! Even contacted Lenovo UK official website just so they can tell me that they have no support whatsoever for the ZUK models anymore, lol
Now im testing Custum ROMs, curently using ([ROM][11][OFFICIAL]DotOS v5.1 for ZUK Z2_PLUS[R])
since i have an overheating problem, while playing Genshin Impact the phone goes crazy hot and restart on its own...
Im trying to get rid of that problem now... any ideas?
BTW, the forced Restart of the phone only happens when im trying to play Genshin Impact, no problems with other games... Mortal Kombat 11 runs OK, phones heat up but it doesnt force Restarting
Hey,
Recently I was also trying to unlock the bootloader of my Lenovo Zuk Z2 Plus but the device doesn't get detected in fastboot but gets detected in adb and I can't figure the thing out. It Easily gets detected in Device Manager as ShenQi ADB composite device something but I can't manage to get it to detect in fastboot. Even tried switching Windows 10 to 7.
Any Help would be appreciated.
Thanks
Atharva Sharma
Dears Experts,
kindly have Problems with Miflash, I have 2 Phones of Mi10T, I tried to flash both phones, one is working perfectly and take 689 sec and i did magisk and all Ok
But second one is have 376 sec and when do magisk its seem have some Problems Protection, any Program was asking to download its showing errors I am sure Problem from phone as i tired many Fastboot versions even MIUI13 android 12 and have same result for Both
any suggestion to solve such Problem plz
BR