Develop Bugs

Question Realme GT ME Bricked

Hello guys!
I tried to install magisk so I got a bootloop
Someone told me that i should relock and unlock the bootloader again
Now I have locked bootloader, stock recovery and dont have fastboot
3 free versions of MSM just give me "sahara communication failed" error
Help me please!

try enter to fastboot powering on your phone with vol+ and pwr key, unlock your bootloader, flash vbmeta.img:
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
and then try enter to your system.
If that not works, try do an full recover with the stock recovery first and repeat the first method.
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
good luck!

Hi Help needed pls, I bricked my RealMe RMX3366 when during Magisk installation
How do I rollback to the ROM? - https://4pda.to/forum/index.php?showtopic=1040117&st=0#entry112293156
I tried installation TWRP for RMX3370?
How do I Flash using Fastboot or TWRP 3.7?

I dont have fastboot bro my bootloader is locked

_M5_F90_ said:
I dont have fastboot bro my bootloader is locked
Click to expand...
Click to collapse
I have bootloader unlocked but can't flash to stock ROM!

I've unlock the bootloader but i don't write fastboot disabile verify,how to for root?and the file vbmeta Is create when launch this command?

_M5_F90_ said:
I dont have fastboot bro my bootloader is locked
Click to expand...
Click to collapse
maybe you should restore to stock ROM first with stock recovery?
if that not work for you, you can try use PC flash tool like this: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
Enter fastboot mode - Shutdown phone,then long press the power & volume down key simultaneous to enter the fastboot mode interface
good luck!

Juliancth said:
I have bootloader unlocked but can't flash to stock ROM!
Click to expand...
Click to collapse
try this tool: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
tutorial: https://c.realme.com/in/post-details/1283756632748064768

zopptex said:
try this tool: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
tutorial: https://c.realme.com/in/post-details/1283756632748064768
Click to expand...
Click to collapse
Thank you Zopptex, I just realised there's one for RMX 3360 and 3363. Do you know where's the firmware for Realme RMX3366 Master Explorer Edition? maybe I am in a wrong thread but your help is much appreciated!!

zopptex said:
try this tool: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
tutorial: https://c.realme.com/in/post-details/1283756632748064768
Click to expand...
Click to collapse
Hi Bro, thank you for the guide. I bumped into Cannot Find Central Directory on Realme Flash Tool when I click Flash! Appreciate your help bro

zopptex said:
try enter to fastboot powering on your phone with vol+ and pwr key, unlock your bootloader, flash vbmeta.img:
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
and then try enter to your system.
If that not works, try do an full recover with the stock recovery first and repeat the first method.
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
good luck!
Click to expand...
Click to collapse
Hi ZoppTex, could you pls assist to provide a guide of the 3rd method pls?
which is:
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
MCT_OFP_extractor method pls

Juliancth said:
Hi ZoppTex, could you pls assist to provide a guide of the 3rd method pls?
which is:
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
MCT_OFP_extractor method pls
Click to expand...
Click to collapse
I just found this download point for rmx3366, I cant verify if this file can be use for your phone: https://support.halabtech.com/index.php?a=downloads&b=folder&id=139179
Maybe once you got the right ofp file, you can just use the official Realmen Flash Tool?
For the third method:
Once you got the right ofp file for your phone, just open the extractor and extract ever partition from ofp file you found, and try flash them one by one using fastboot tool, commands are like: fastboot flash *partition* *.img file* with your phone in Fastboot Mode.
That's all I can tell you because I realize that your don't have my phone model: rmx3363.
Goog luck.

zopptex said:
I just found this download point for rmx3366, I cant verify if this file can be use for your phone: https://support.halabtech.com/index.php?a=downloads&b=folder&id=139179
Maybe once you got the right ofp file, you can just use the official Realmen Flash Tool?
For the third method:
Once you got the right ofp file for your phone, just open the extractor and extract ever partition from ofp file you found, and try flash them one by one using fastboot tool, commands are like: fastboot flash *partition* *.img file* with your phone in Fastboot Mode.
That's all I can tell you because I realize that your don't have my phone model: rmx3363.
Goog luck.
Click to expand...
Click to collapse
thanks bro, I managed to get it fix at my local Realme Service Centre. Friendly technician has assisted me in Malaysia

you can flash stock firmware using this file
https://github.com/italorecife/OppoRealme-OFP-Flash/releases/download/1.0/OppoRealme-OFP-Flash_1.0-x64_Windows.zip

How To Guide Getting root on Android 10 using fastboot (fastboot does not work on 11).

For Android 10, you need to flash the magiskboot.img and vbmeta patched by Magisk with verification disabled.
Download Platform Tools (we unpack the folder itself and throw it on disk c) and the oppo drivers (install them), also the patched Magisk boot and the stock vbmeta (we throw the boot and vbmeta into the Platform Tools folder)
go to the phone settings and turn on the developer mode, tapping several times on the build number, go there and turn on usb debugging, go to the c drive, open the folder from the tool platforms, write cmd on the command line of the folder and press enter, the adb console will open.
Spoiler: first way
1 (more difficult way). In the console we enter:
Code:
adb devices
your serial number will be displayed
then enter:
Code:
adb reboot bootloader
phone will reboot and boot into fastboot mode
now in the console we enter:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
to patch vbmetu.
then enter the command to fill our patched boot:
Code:
fastboot flash boot magiskboot.img
after we enter the command to enter the recovery:
Code:
fastboot reboot recovery
We make wipes in recovery.
we go into the system, install the magisk program, then run it, and a window will immediately fly out that an advanced installation is required, we agree, and the body will go to reboot, we enter the system and enjoy root rights.
Spoiler: second way
2 (easier way). you can also boot directly into fastboot mode when the phone is off, for this we hold down the power button and the adjustment button -, the phone will immediately boot into fastboot mode, connect the phone to the computer, then open the console on the computer and enter these commands in turn:
Code:
fastboot devices
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Code:
fastboot flash boot magiskboot.img
Code:
fastboot reboot recovery
We make wipes in recovery.
we go into the system, install the magisk program, then run it, and a window will immediately fly out that an advanced installation is required, we agree, and the body will go to reboot, we enter the system and enjoy root rights.

I have seen vbmeta is optional in Magisk document so I did not write it.
Also, for me, because I usually have problem with ADB command, so I root mine without it. (install Magisk.apk & moving boot and patched one manually.)
Only tool I used here is MTKclient, and got some something interesting here, because I got bootloop with orange state, differs to other into launcher. So I decided to flash patched boot with other partitions
at the same time just after unlock my devices with MTKclient's GUI. Escaping bootloop, then I can use Magisk smoothly like others.
p.s. If u cannot connect devices with ADB, changing USB option to MTP.

to me, I never be in fastboot.

logforjj said:
I have seen vbmeta is optional in Magisk document so I did not write it.
Also, for me, because I usually have problem with ADB command, so I root mine without it. (install Magisk.apk & moving boot and patched one manually.)
Only tool I used here is MTKclient, and got some something interesting here, because I got bootloop with orange state, differs to other into launcher. So I decided to flash patched boot with other partitions
at the same time just after unlock my devices with MTKclient's GUI. Escaping bootloop, then I can use Magisk smoothly like others.
p.s. If u cannot connect devices with ADB, changing USB option to MTP.
Click to expand...
Click to collapse
It is not necessary to sew the MTKclient, it is enough for them to unlock the bootloader with one command, then you charge the flash drive, and sew all the partitions, after that you make a root, patch with a magic boot, fill it with anything, at least with a flash drive, at least through a fastboot, at least with a mtk client, why sew with a flash drive, because the filling speed of the super section is very low for the client's mtc.

logforjj said:
to me, I never be in fastboot.
Click to expand...
Click to collapse
fastboot works perfectly on this device and only on android 10, and it is more convenient to use it, unlike the mtk client

seems this guide is the most fastest way to root this phone, hoping new players can see this topic as soon as they start rooting their devices!

leon2299 said:
fastboot works perfectly on this device and only on android 10, and it is more convenient to use it, unlike the mtk client
Click to expand...
Click to collapse
something did not match this topic: could you share any suggestion to push this devices to the best performance?
I see no custom rom or kernel to overclock or neaten, this make me dissapointed after rooted.

logforjj said:
something did not match this topic: could you share any suggestion to push this devices to the best performance?
I see no custom rom or kernel to overclock or neaten, this make me dissapointed after rooted.
Click to expand...
Click to collapse
You can do custom, download the GSI firmware, unpack the super partition, there will be an image of systems.img, delete it, rename the GSI firmware to system.img, copy it instead of the remote system.img, and pack all this into a format raw then sew the mtk client, well or pack in spars format and sew with a SP Flashtool, if GSI 11 is an android, then you must have realme UI2.0 installed

if you want, I can make you a custom, unpack and pack, I know how, and there just sew a mtk client, a section with a super team:
Code:
python mtk w super super.img
super itself needs to be thrown into the client's mtk folder
all at your own peril and risk
well, or do it yourself, in any case, I shared the information, try it, I put these on this device myself GSI
TrebleGSI - Browse /LiR/2022.03.25 at SourceForge.net
sourceforge.net
you can try this

leon2299 said:
if you want, I can make you a custom, unpack and pack, I know how, and there just sew a mtk client, a section with a super team:
Code:
python mtk w super super.img
super itself needs to be thrown into the client's mtk folder
all at your own peril and risk
well, or do it yourself, in any case, I shared the information, try it, I put these on this device myself GSI
TrebleGSI - Browse /LiR/2022.03.25 at SourceForge.net
sourceforge.net
you can try this
Click to expand...
Click to collapse
Well, it seems that these operations are beyond my comprehension.
I've been trying to understand your instructions and find information about them for a while now:
GSI firmware
A/B system
what is super.img
tool to unpack and edit it
It seems that I can't finish the previous operation
unpack tool says: logical partition metadata has invalid geometry magic signature
simg2img says: it is not a super.img
I might know how to write super.img to my device since I have fixed it about unbrick and no sim & IMEI
The phone turns into a brick after using the MTK client client (GUI) function, please help!
When I click on all the erase options, the client only recognizes them but cannot save me back to the phone. The volume and power buttons are not responding. Please help me!
forum.xda-developers.com
I would appreciate it so much if you would explain the steps in more detail(or just make me a custom because of my brainless...)

wait...
What agZ bgZ avZ bvZ and lite mean? · Issue #20 · eremitein/treble-patches
github.com
Maybe I can hadle it by myself.

logforjj said:
Ну, кажется, эти операции выше моего понимания.
Я уже некоторое время пытаюсь понять ваши инструкции и найти информацию о них:
прошивка GSI
А/Б система
что такое super.img
инструмент для распаковки и редактирования
Кажется, я не могу закончить предыдущую операцию
инструмент распаковки говорит: метаданные логического раздела имеют недопустимую магическую подпись геометрии
simg2img говорит: это не super.img
Я мог бы знать, как записать super.img на свое устройство, так как я исправил его с разблокировкой и отсутствием симки и IMEI.
https://forum.xda-developers.com/t/...t-gui-function- пожалуйста, помогите.4420657/Я был бы очень признателен, если бы вы объяснили шаги более подробно (или просто сделали бы мне обычай из-за моего безмозглого...)
Click to expand...
Click to collapse
┤Mod Edit├┤Download link removed├

stuck in orange state, can not boot in (have been wait for a while)

logforjj said:
stuck in orange state, can not boot in (have been wait for a while)
Click to expand...
Click to collapse
if you did everything correctly as in the manual, then when there will be an inscription when loading the orange state, you need to wait 5 minutes, then the system should start, if it does not start, then you are doing something wrong.

leon2299 said:
if you did everything correctly as in the manual, then when there will be an inscription when loading the orange state, you need to wait 5 minutes, then the system should start, if it does not start, then you are doing something wrong.
Click to expand...
Click to collapse
sorry for that I do not I have to wait for so long, I go into recovery and wipe data last night, I think I can do custom rom again now and should be success after 5 mins.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

After super flashing step is done, I will plug off directly to disconnect without mtk reset.
it does not start after 40 mins.

logforjj said:
After super flashing step is done, I will plug off directly to disconnect without mtk reset.
Click to expand...
Click to collapse

How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
I think I got problem due to some manual operation before, like using Magisk patched boot as version 24.2 before processing,
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
this is what I concerned about, maybe I never do this on my device？Trying AOSP you provided after waiting an hour for lineage OS, any suggestion is welcome!

logforjj said:
How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
I think I got problem due to some manual operation before, like using Magisk patched boot as version 24.2 before processing,
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
this is what I concerned about, maybe I never do this on my device？Trying AOSP you provided after waiting an hour for lineage OS, any suggestion is welcome!
Click to expand...
Click to collapse
name your region, what firmware and what region you installed before further manipulations, I will download the firmware for your region, get super from there and make you a custom

leon2299 said:
name your region, what firmware and what region you installed before further manipulations, I will download the firmware for your region, get super from there and make you a custom
Click to expand...
Click to collapse
leon2299 said:
if GSI 11 is an android, then you must have realme UI2.0 installed
Click to expand...
Click to collapse
Need to apologize to you for my careless here again, I have not known what that hint means in English exactly, I suppose that it is okay to work on android 10 with realme UI 1.0. I started rooting and unbricking when I initially was android 11 with realme UI 2.0 and end up with android 10 with realme UI 1.0. with magisk 24.2. now I am unbricking device to get information for your demand to getting clear about my region and other.

Development [UNOFFICIAL] Xiaomi Pad 5 nabu OrangeFox/TWRP recovery

!!!!!DISCLAIMER!!!!!! --- below info is provided as is without any warranty, do it on your own risk
!!!!!!WARNING!!!!!!! DO NOT FLASH THIS IMAGE, your tablet do not have recovery partition.
[UPDATE Jan 06 2023]
- added a new image to GitHub that contains parted and a proper version of sgdisk
_______________________________
Donate a coffee to support development:
Donate via PayPal to serdeliuk
Hi,
I have built a semi-working OrangeFox image that can be booted via fastboot and get adb shell.
The on-screen interface do not work yet, but adb shell gives access to the device to manipulate the storage for example, i was able to resize partitions and add new partitions pushing tools to device.
Best regards,
M

The img file is available at Xiaomi Pad 5 nabu OrangeFox recovery

That's a good start, please keep us posted on any progress.

Dev Dezigns said:
That's a good start, please keep us posted on any progress.
Click to expand...
Click to collapse
Thank you, i will.

dude support U！

nicflack said:
dude support U！
Click to expand...
Click to collapse
Thank you

any update for this project?

acfalexin said:
any update for this project?
Click to expand...
Click to collapse
Hi, not yet, i will update the post when i will have anything new.

All the best

Very Good Bro Keep it Up
When Your Work Finish Let Us Know !

hello dear, please tell me, I put your tablet on OrangFox, but the tablet is not transferred to it, it just returns to Fastboot, I managed to log in once, but I don’t remember how, please tell me why I can’t log into OrangFox?

you cannot install this OrangeFox recovery, on one hand the Pad5 tablet does not have a recovery partition being an A/B device, and on the other hand the provided image is incomplete, you can only boot the image from fastboot mode, keep in mind that you will not be able to see the OrangeFox menu, only adb will work
Code:
fastboot boot xiaomi-nabu-orangefox.img

serdeliuk said:
you cannot install this OrangeFox recovery, on one hand the Pad5 tablet does not have a recovery partition being an A/B device, and on the other hand the provided image is incomplete, you can only boot the image from fastboot mode, keep in mind that you will not be able to see the OrangeFox menu, only adb will work
Code:
fastboot boot xiaomi-nabu-orangefox.img
Click to expand...
Click to collapse
that's the problem, that after the firmware I have it loaded back into Fastboot instead of OrangFox

AH-94 said:
that's the problem, that after the firmware I have it loaded back into Fastboot instead of OrangFox
Click to expand...
Click to collapse
This OrangeFox works only on Xiaomi Pad 5 (nabu), if you have a Pad 5 Pro maybe that's why do not work

serdeliuk said:
This OrangeFox works only on Xiaomi Pad 5 (nabu), if you have a Pad 5 Pro maybe that's why do not work
Click to expand...
Click to collapse
I understand that there is no interface, the problem is that after firmware it does not load into recovery, only in fastboot, that's the problem
I have nabu

serdeliuk said:
This OrangeFox works only on Xiaomi Pad 5 (nabu), if you have a Pad 5 Pro maybe that's why do not work
Click to expand...
Click to collapse
I was able to log into it once and that's it, then it didn't work anymore, neither with the buttons nor with the "Fastboot reboot recovery" command

AH-94 said:
I was able to log into it once and that's it, then it didn't work anymore, neither with the buttons nor with the "Fastboot reboot recovery" command
Click to expand...
Click to collapse
AH-94 said:
I understand that there is no interface, the problem is that after firmware it does not load into recovery, only in fastboot, that's the problem
I have nabu
Click to expand...
Click to collapse
it is not very clear what you did and what is the result, please try to describe all steps you did and the result.
If you just try to root your device try this post
Root your Xiaomi Pad 5 (nabu) without TWRP/OrangeFox
Donate a coffee to support development: Donate via PayPal to serdeliuk _______________________________ !!!!!DISCLAIMER!!!!!! --- below info is provided as is without any warranty, do it on your own risk In order to root your device you may...
forum.xda-developers.com

serdeliuk said:
не очень понятно что вы делали и каков результат, попробуйте пожалуйста описать все действия которые вы делали и результат.
Если вы просто пытаетесь получить root права на свое устройство, попробуйте этот пост
Root your Xiaomi Pad 5 (nabu) without TWRP/OrangeFox
Donate a coffee to support development: Donate via PayPal to serdeliuk _______________________________ !!!!!DISCLAIMER!!!!!! --- below info is provided as is without any warranty, do it on your own risk In order to root your device you may...
forum.xda-developers.com
Click to expand...
Click to collapse
I flashed your OrangFox, I want to switch to it, it reboots back into Fastboot, once I was able to boot into OrangFox and that's it, I can't root because I need to restore the memory layout, for this I need OrangFox.

AH-94 said:
I flashed your OrangFox, I want to switch to it, it reboots back into Fastboot, once I was able to boot into OrangFox and that's it, I can't root because I need to restore the memory layout, for this I need OrangFox.
Click to expand...
Click to collapse
please provide exact commands you did, where you flashed the img?
from your computer while in fastboot on your tablet run the following command
Code:
fastboot getvar current-slot
Then if your device do not boot anymore on actual slot you can try the other slot that has the old OS, switch to the other slot with the following command, replace $SLOTNAME with a or b depending on what the previous command return, if previous command return a you need to use b as $SLOTNAME, otherwise use a
Code:
fastboot set_active $SLOTNAME
then reboot your tablet
Code:
fastboot reboot

serdeliuk said:
пожалуйста, предоставьте точные команды, которые вы сделали, где вы прошивали img?
с вашего компьютера, в то время как в fastboot на вашем планшете выполните следующую команду
Code:
текущий слот fastboot getvar
Затем, если ваше устройство больше не загружается в реальном слоте, вы можете попробовать другой слот со старой ОС, переключиться на другой слот с помощью следующей команды, замените $SLOTNAME на a или b в зависимости от того, что возвращает предыдущая команда, если предыдущая команда возвращает a, вам нужно использовать b как $SLOTNAME, в противном случае используйте a
Code:
fastboot set_active $SLOTNAME
затем перезагрузите планшет
[КОД] перезагрузка через быструю загрузку[/КОД]
Click to expand...
Click to collapse
oh comrade, thanks for helping, I'll try to do as you said, I'll write in the evening what came of it, thanks again

error with install twrp with adb/fastboot

hello,
My phone is deblocked, i'm an Mioi 12.5 and android 11, then.
I want to install twrp 3.629 or twrp-unified with adb and fastboot on my RN 8 pro :
adb reboot fastboot => ok
fastboot flash recovery twrp.img =>ok
fastboot reboot recovery => unknow reboot target recovery !!!
with xiaomiadbfastboottools.jar, it's the same, i can install my twrp.img, but can't restart in recovery mode (it's grey), and the phone restart in system !
Where i'm wrong ? and what may i do ? may i do install magisk ?
Thank you for your help !

avecousans said:
.....
adb reboot fastboot => ok
fastboot flash recovery twrp.img =>ok......
Click to expand...
Click to collapse
I used the command: fastboot flash recovory recovery.img after renaming twrp.img.
Perhaps that helps.

Thank's ! But it dont work
I see somewhere that this twrp don't work with the RN8P based on MTK
So, i extract vbmeta.img and patch with :
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img =>ok
and flash the twrp => ok .... but always the same, i can't reboot in recovery mode, with fastboot or with button power + up
I can't install twrp, still.

avecousans said:
Thank's ! But it dont work
I see somewhere that this twrp don't work with the RN8P based on MTK
So, i extract vbmeta.img and patch with :
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img =>ok
and flash the twrp => ok .... but always the same, i can't reboot in recovery mode, with fastboot or with button power + up
I can't install twrp, still.
Click to expand...
Click to collapse
Did you try older TWRPs?

bmwdroid said:
Did you try older TWRPs?
Click to expand...
Click to collapse
No, it seems to be the last on, the 3.6.2.9 for bégonia, find on the official Twrp site

avecousans said:
No, it seems to be the last on, the 3.6.2.9 for bégonia, find on the official Twrp site
Click to expand...
Click to collapse
I know but not all official TWRPs are tested working as I had to learn myself.

avecousans said:
No, it seems to be the last on, the 3.6.2.9 for bégonia, find on the official Twrp site
Click to expand...
Click to collapse
3.6.2_9...
And "_9" mean for Android 9 version of Miui and custom rom based on that.
If you want to use TWRP in Miui 12.5.x, find TWRP for Begonia that name "3.x.x_11". And sure it's unofficial.

Oh good !
I try it soon as possible

thank you for your help, i can install twrp 3.6.0.11 and it's allright !

Question How do I install custom recovery on Xiaomi 11 lite 5g ne ( lisa ) global ?

I'm new to Xiaomi devices , I Have Xiaomi 11 lite 5g ne ( lisa ) global version ( Snapdragon 778G 5g ) and I wanted to install the cherish os 4.2 on it but I don't know how to flash the custom recovery for it, can someone please tell how to flash it step by step? I'll be so grateful.

Did u unlock bootloader ??
If not u must do it first
After register for unlock u must wait 7days to unlock...

boneszbo said:
Did u unlock bootloader ??
If not u must do it first
After register for unlock u must wait 7days to unlock...
Click to expand...
Click to collapse
Yes, I only want to know how to flash the custom recovery for the cherish os step by step

Muneebos77 said:
Yes, I only want to know how to flash the custom recovery for the cherish os step by step
Click to expand...
Click to collapse
Reboot to bootloader (fastboot)
Connect the phone to PC
fastboot flash boot boot.img
fastboot flash vendor_boot vendor_boot.img
If already on custom ROM skip the previous steps and flash with your recovery
fastboot reboot recovery
Select Wipe data/factory reset & confirm
Go back and select Apply update from ADB
ADB sideload Cherish-OS*.zip
After installation is complete, Reboot the system.

Thanks but I don't know how to this :
" • fastboot flash boot boot.img
• fastboot flash vendor_boot vendor_boot.img "
If you can tell how exactly I can do it ( detailed step by step) I'll be so thankful.

you have to enter fastboot mode of your phone. hold volume down and power button on booting. You will see in orange letters "FASTBOOT" on your display. Then connect your device to PC
the boot.img and vendor.img are files which you will find here also the newest cherish os rom version is there.
"fastboot ..." are the commands you need when your phone is in fastboot mode connected to your PC (type in Commandline)
you need Minimal adb and fastboot tools on your PC
don't forget to format Data before flashing zip file in recovery.

so , I should download the both files , boot image and the vendor image , and after that in the cmd , I just type the commands without dragging the files ?

Muneebos77 said:
so , I should download the both files , boot image and the vendor image , and after that in the cmd , I just type the commands without dragging the files ?
Click to expand...
Click to collapse
yes

This YouTube video helped me to install custom recovery and custom ROM on my 11 lite 5G NE Global

I watched it , but I don't know if the same method will work with the cherish recovery or not because it has 2 image files

Muneebos77 said:
I watched it , but I don't know if the same method will work with the cherish recovery or not because it has 2 image files
Click to expand...
Click to collapse
Which 2 image files do you mean? Here are all files you need. (boot.img vendor_boot.img; just rename them) and cherishOS in Version 4.1 and 4.2
I installed it yesterday from this source:
CherishOS - Browse /device/lisa at SourceForge.net
sourceforge.net

sensimilia1982 said:
Which 2 image files do you mean? Here are all files you need. (boot.img vendor_boot.img; just rename them) and cherishOS in Version 4.1 and 4.2
I installed it yesterday from this source:
CherishOS - Browse /device/lisa at SourceForge.net
sourceforge.net
Click to expand...
Click to collapse
Oh , so I just have to download the qsvendor_boot.img ( the recovery ) ?

Muneebos77 said:
Oh , so I just have to download the qsvendor_boot.img ( the recovery ) ?
Click to expand...
Click to collapse
You need qsvendor_boot.img, qsboot.img and Cherish-OS*.zip

Oh ok

My BL is already unlocked and has the latest Miui 13 and A12 global official firmware. it will be first time custom recovery to be flashed.
I wonder if my all data to be erased during Orange fox recovery?

sas_sas said:
My BT is already unlocked and has the latest Miui 13 and A12 global official firmware. it will be first time custom recovery to be flashed.
I wonder if my all data to be erased during Orange fox recovery?
Click to expand...
Click to collapse
Installing OF to Ramdisk in Boot partition has nothing to do with wiping Data partition