Related
bye
bye
Reserved
Thanks Jo-san
I donwload
What kind of battery optimizations did you implement ?
puppetmaster22 said:
Thanks Jo-san
I donwload
Click to expand...
Click to collapse
you re welcome
JakobiE said:
What kind of battery optimizations did you implement ?
Click to expand...
Click to collapse
deep sleep tweaks
Flash internal memory is recommanded? I have not done that
i flash supersu at first and after rom,if i flash at first rom i have a error
puppetmaster22 said:
Flash internal memory is recommanded? I have not done that
i flash supersu at first and after rom,if i flash at first rom i have a error
Click to expand...
Click to collapse
yes you need to follow my steps..you should be on root before flashing..and following my steps...wipe internal too. than flash rom and after flash again supersu
Thanks bro!!
Thanks a lot!
insestito said:
Thanks bro!!
Thanks a lot!
Click to expand...
Click to collapse
you re welcome
Jo-san said:
yes you need to follow my steps..you should be on root before flashing..and following my steps...wipe internal too. than flash rom and after flash again supersu
Click to expand...
Click to collapse
I don't follow your steps and rom working good
More than 4,5 hours of battery life with this ROM?
Thanks
puppetmaster22 said:
I don't follow your steps and rom working good
Click to expand...
Click to collapse
a deep clean is suggestsed..it gives to you a clean performant rom
insestito said:
More than 4,5 hours of battery life with this ROM?
Thanks
Click to expand...
Click to collapse
i ve made 5 hours of screen personally
Perfect at the moment
thanks, do you plan for the next Update a new base like 5.10.8 ?
reflex9000 said:
thanks, do you plan for the next Update a new base like 5.10.8 ?
Click to expand...
Click to collapse
you are welcome
insestito said:
Perfect at the moment
Click to expand...
Click to collapse
of course..but 5.9.18 actully is more stable than 5.10.8...I will change when I will have a goof feedback about new releases
please, leave me a thanks to the first post at the beginnin'
Always when I used the miui 7 ROMs, I had the problem that sometimes after a day of use, the device just didn't wake up after pressing the lock button. The buttons are showing light but I couldn't use the device until I swapped out the battery. Does someone of you have the same problem?
And I was wondering if this happens with this rom as well.
I have the same problem ~1-2 times a day....I haven't tried out with this rom, will do it later this day :thumbup:
JakobiE said:
Always when I used the miui 7 ROMs, I had the problem that sometimes after a day of use, the device just didn't wake up after pressing the lock button. The buttons are showing light but I couldn't use the device until I swapped out the battery. Does someone of you have the same problem?
And I was wondering if this happens with this rom as well.
Click to expand...
Click to collapse
i have the same problem on the official miui 7 5.9.18, when i will install this "deer", i will check it.
dexter_39 said:
i have the same problem on the official miui 7 5.9.18, when i will install this "deer", i will check it.
Click to expand...
Click to collapse
Thanks a lot !
It's very hard to edit 2 thread same time We can meet on edge version thread.
Here you are;
http://forum.xda-developers.com/s7-edge/development/kernel-voltaqe-kernel-t3397545
http://forum.xda-developers.com/showpost.php?p=67291289&postcount=2
Mine too
mineee
Last
Has anyone tried this kernel?
Scandy said:
Has anyone tried this kernel?
Click to expand...
Click to collapse
Yes successfully booted and A LOT of customization there as always.
@VoLTaqe glad to see you again with same phone after s4. As always im ready for test
Wow nice kernel, good job :good:
@VoLTaqe glad to see you again with same phone after s4. As always im ready for test
Click to expand...
Click to collapse
After S4 we join all on S7 ^^
Great, phone wont boot. Says " Verification failed "
Hi,
Is your screen control like kcal?
Hi, could you add support for korean variants of S7? (G930K,S,L)
When I try to build from G930F kernel sources with defconfig modified for my device, random reboots occur when connected to USB, which drives me crazy.
Thanks in advance.
japjaan said:
Hi,
Is your screen control like kcal?
Click to expand...
Click to collapse
kcal ?
Shuuin said:
kcal ?
Click to expand...
Click to collapse
https://cdn-images.xda-developers.com/direct/3/1/9/5/2/3/1/1425543767993.jpg
Do you have any plans to bring this to the edge 935f?
japjaan said:
Hi,
Is your screen control like kcal?
Click to expand...
Click to collapse
Nope it contain only wake controls for now.
kykint said:
Hi, could you add support for korean variants of S7? (G930K,S,L)
When I try to build from G930F kernel sources with defconfig modified for my device, random reboots occur when connected to USB, which drives me crazy.
Thanks in advance.
Click to expand...
Click to collapse
You need generate and change dtb.img too.
el7145 said:
Do you have any plans to bring this to the edge 935f?
Click to expand...
Click to collapse
Yes i am when find any tester.
QUOTE=Arvis20;67238578]Wow nice kernel, good job :good:[/QUOTE]
Good using
alexofhiswalnut said:
@VoLTaqe glad to see you again with same phone after s4. As always im ready for test
After S4 we join all on S7 ^^
Click to expand...
Click to collapse
Wow glad to see you too again. Hope we can build a community there too like s4
Shuuin said:
Great, phone wont boot. Says " Verification failed "
Click to expand...
Click to collapse
Disable samsung verification nothing wrong with kernel.
If you find any problem please report.
VoLTaqe said:
You need generate and change dtb.img too.
Click to expand...
Click to collapse
Yup I changed dtb.img too and applied every ramdisk change from the original kernel. Still reboots randomly.
Btw I just flashed your kernel and it's working well on my G930K, except for dmb. Nice so far.
VoLTaqe said:
Nope it contain only wake controls for now.
You need generate and change dtb.img too.
Yes i am when find any tester.
QUOTE=Arvis20;67238578]Wow nice kernel, good job :good:
Click to expand...
Click to collapse
Good using
Wow glad to see you too again. Hope we can build a community there too like s4
Disable samsung verification nothing wrong with kernel.[/QUOTE]
Disable samsung verification, and how ?
Shuuin said:
Great, phone wont boot. Says " Verification failed "
Click to expand...
Click to collapse
Your phone is encrypted mate you need to go into recovery and format data then reflash rom and kernel
Sent from my SM-G930F using Tapatalk
Hey guys i found this is one some Chinese forums
Looks like its a ported from x2
It will be nice if someone can upload it on gdrive or some other host
bbs.ydss.cn/forum.php?mod=viewthread&tid=1266681&pe=1&mobile=2
Please use https:// before link
Alto69 said:
Hey guys i found this is one some Chinese forums
Looks like its a ported from x2
It will be nice if someone can upload it on gdrive or some other host
bbs.ydss.cn/forum.php?mod=viewthread&tid=1266681&pe=1&mobile=2
Please use https:// before link
Click to expand...
Click to collapse
https://mega.nz/#F!KfgB1RCS!pGLfC4d_8_kS11vlk86eHA
if you play games don't flash this yet otherwise it's okay
Alto69 said:
Hey guys i found this is one some Chinese forums
Looks like its a ported from x2
It will be nice if someone can upload it on gdrive or some other host
bbs.ydss.cn/forum.php?mod=viewthread&tid=1266681&pe=1&mobile=2
Please use https:// before link
Click to expand...
Click to collapse
Nfc doesn't work there, except this all other functions runs smooth.
How to install it?
Hidden1977 said:
How to install it?
Click to expand...
Click to collapse
"Recommended to use the TWRP 3.2.3 version. Enter recovery mode, clear data, system, cache, davilk, flash ROM, restart. It takes a little longer to start up for the first time, please be patient"
After that - check the frequencies of processor, it may work at maximum and as a result is heated (but not for all users, may be depend 722/720) except this, all works well (no NFC)
And what gapps?
Hidden1977 said:
And what gapps?
Click to expand...
Click to collapse
included, looks like the Pixel phone
sierte said:
"Recommended to use the TWRP 3.2.3 version. Enter recovery mode, clear data, system, cache, davilk, flash ROM, restart. It takes a little longer to start up for the first time, please be patient"
After that - check the frequencies of processor, it may work at maximum and as a result is heated (but not for all users, may be depend 722/720) except this, all works well (no NFC)
Click to expand...
Click to collapse
Sir through recovery select image twrp 3.2.3 and flash recovery or boot?
3llawi said:
Sir through recovery select image twrp 3.2.3 and flash recovery or boot?
Click to expand...
Click to collapse
i think if you have other version of TWRP you need to flash 3.2.3 from your current Recovery and boot to Recovery again.
Th Rom is awesome thanks but little laggy
I will wait for next build
3llawi said:
Th Rom is awesome thanks but little laggy
I will wait for next build
Click to expand...
Click to collapse
The brand new Pixel Experience version, is also Pie 9.0 and is more fluid . Plus has better battery life, and doesn't get so hot.
tsongming said:
The brand new Pixel Experience version, is also Pie 9.0 and is more fluid . Plus has better battery life, and doesn't get so hot.
Click to expand...
Click to collapse
Can you give a link, i searched forum but i got only 8.1 in results.
Edit: Found it, sorry for bothering.
lopusina said:
Can you give a link, i searched forum but i got only 8.1 in results.
Edit: Found it, sorry for bothering.
Click to expand...
Click to collapse
https://forum.xda-developers.com/le-pro3/development/rom-t3839737
tsongming said:
https://forum.xda-developers.com/le-pro3/development/rom-t3839737
Click to expand...
Click to collapse
Revenge OS
https://mega.nz/#F!KfgB1RCS!pGLfC4d_8_kS11vlk86eHA
Twrp 3.2.3.0, ver. For..Zl0..not try yet...
https://uloz.to/!Fqu4prmsG79H/twrp-3-2-3-0-zl0-img
rkorenek said:
Revenge OS
https://mega.nz/#F!KfgB1RCS!pGLfC4d_8_kS11vlk86eHA
Twrp 3.2.3.0, ver. For..Zl0..not try yet...
https://uloz.to/!Fqu4prmsG79H/twrp-3-2-3-0-zl0-img
Click to expand...
Click to collapse
The brand new Pixel Experience version, is also Pie 9.0 and is more fluid . Plus has better battery life, and doesn't get so hot.
Also, only use Twrp from the official source
Treble Rom?
Anybody here knows if it's a treble rom?
foxmichel said:
Anybody here knows if it's a treble rom?
Click to expand...
Click to collapse
The author (JMXL) wrote 'not based on Project Treble'.
I can't update from aex 6.2 to aex 6.3 on my zuk z2 plus, it says failed to update vendor image
Pls help
Gsat1804 said:
I can't update from aex 6.2 to aex 6.3 on my zuk z2 plus, it says failed to update vendor image
Pls help
Click to expand...
Click to collapse
Update twrp to latest official twrp and flash vendor2factory.zip
Everything will be fine
hf958 said:
Update twrp to latest official twrp and flash vendor2factory.zip
Everything will be fine
Click to expand...
Click to collapse
Can you suggest a good kernel for long battery life
(I'm running aex 6.3(pie))
hf958 said:
Update twrp to latest official twrp and flash vendor2factory.zip
Everything will be fine
Click to expand...
Click to collapse
I'm only getting 2 hours sot
Gsat1804 said:
I'm only getting 2 hours sot
Click to expand...
Click to collapse
Try bubblewrap eas latest
Best kernel
hf958 said:
Best kernel
Click to expand...
Click to collapse
I don't no if it works for pie roms
hf958 said:
I don't no if it works for pie roms
Click to expand...
Click to collapse
Can u suggest a good Oreo Ron where I can play pubg without any heating issue and also a kernel for the suggested Rom
Gsat1804 said:
Can u suggest a good Oreo Ron where I can play pubg without any heating issue and also a kernel for the suggested Rom
Click to expand...
Click to collapse
Dotos 2.3.1 nothing else needed
hf958 said:
Dotos 2.3.1 nothing else needed
Click to expand...
Click to collapse
Thanks a lot
ⁿ
hf958 said:
Dotos 2.3.1 nothing else needed
Click to expand...
Click to collapse
Are you sure I don't need any custom kernel
Can I flash the ROM you mentioned earlier? ' The big ****in rocketa underclocked'
Gsat1804 said:
ⁿ
Are you sure I don't need any custom kernel
Can I flash the ROM you mentioned earlier? ' The big ****in rocketa underclocked'
Click to expand...
Click to collapse
No just flash dotos 2.3.1 without any kernel
Just stock kernel is enough
I'm currently using it bro
hf958 said:
No just flash dotos 2.3.1 without any kernel
Just stock kernel is enough
I'm currently using it bro
Click to expand...
Click to collapse
Ok fine
hf958 said:
No just flash dotos 2.3.1 without any kernel
Just stock kernel is enough
I'm currently using it bro
Click to expand...
Click to collapse
Phone still heating between 55-60 degrees while Playing pubg
hf958 said:
No just flash dotos 2.3.1 without any kernel
Just stock kernel is enough
I'm currently using it bro
Click to expand...
Click to collapse
And I'm getting only 2 hours sot
Gsat1804 said:
And I'm getting only 2 hours sot
Click to expand...
Click to collapse
Heating and less sot happens in every rom
Either u have sacrifice battery is u more gaming performance
And you'll also have heating
If u want less heating flash thermal mod but I'll reduce performance
hf958 said:
Heating and less sot happens in every rom
Either u have sacrifice battery is u more gaming performance
And you'll also have heating
If u want less heating flash thermal mod but I'll reduce performance
Click to expand...
Click to collapse
Ok fine
hf958 said:
Heating and less sot happens in every rom
Either u have sacrifice battery is u more gaming performance
And you'll also have heating
If u want less heating flash thermal mod but I'll reduce performance
Click to expand...
Click to collapse
Uber kernel + ubercool mod are good?
Gsat1804 said:
Uber kernel + ubercool mod are good?
Click to expand...
Click to collapse
Nope useless totally
hf958 said:
Nope useless totally
Click to expand...
Click to collapse
Just give me a solution for heating problem
Call mod for stable Xiaomi.eu 12.5.6
Video https://mega.nz/file/mr4yxZrR#z-4a8B7uSodpK1D_0qlPCf0SGKOGRh0AQMP2PwrXvu0
Download module magisk : https://mega.nz/file/i7gEDTAS#fesfo2G2uWrR66lx9xnsdyFnWzoTv8Pzw60-jBqgBEc
fayzrus said:
Call mod for stable Xiaomi.eu 12.5.6
Video https://mega.nz/file/mr4yxZrR#z-4a8B7uSodpK1D_0qlPCf0SGKOGRh0AQMP2PwrXvu0
Download module magisk : https://mega.nz/file/i7gEDTAS#fesfo2G2uWrR66lx9xnsdyFnWzoTv8Pzw60-jBqgBEc
Click to expand...
Click to collapse
there is an extensive mod, video here https://mega.nz/file/TngFQACL#55r4-gndq0ShYeO6EeJH4412TSnpMhp6zyGVAPIMX38
In an extensive fashion, write either in a personal or telegram @FRust79
That statusbar jumping effect looks ridiculous, are you seriously using that?
I can turn it off or choose another option, but you have the same?
fayzrus said:
I can turn it off or choose another option, but you have the same?
Click to expand...
Click to collapse
I also use Xiaomi.eu but I don't have any effects lol. Where'd you get that?
dreamytom said:
I also use Xiaomi.eu but I don't have any effects lol. Where'd you get that?
Click to expand...
Click to collapse
the mod is written in the title, it turns out I made a module with advanced settings
What about sharing extensive mod?
Is it ompatible with One OS?
kreizas said:
What about sharing extensive mod?
Click to expand...
Click to collapse
write in a personal or telegram
min-dfreak said:
Is it ompatible with One OS?
Click to expand...
Click to collapse
I think yes, the only thing in the settings in the parameters will indicate that Xiaomi.eu, although this point is not difficult to correct
update on 12.5.14 and on 21.9.17 I'll post the phone mod in two days, there is an extensive mod now, from the new auto brightness mode
fayzrus said:
update on 12.5.14 and on 21.9.17 I'll post the phone mod in two days, there is an extensive mod now, from the new auto brightness mode
Click to expand...
Click to collapse
wow awesome man
Good guy @fayzrus
He was very helpful with my struggle. Thank you