Related
Does anybody know the interpretation of KernelIoControl with dwIoControlCode = 0x010125E0? The breakdown of the Control Code is:
DeviceType = 0x0101 = FILE_DEVICE_HAL
Access = 0 = ANY_ACCESS
Function = 0x978 = 2424 dec = ?
Method = 0 = BUFFERED
So what is function 0x978 (2424)?
I searched through the WinCE Platform Builder 5.00 files and did not see any definition of 0x978 nor 2424.
thx,
((&->
As I'm new to Samsung handsets...
Someone tried to play with serial cable and Qualcomm Tools like Memory Debug for instance?
Download Mode not allow USB Diag for Qualcomm... only Samsung Modem is still alive in Download Mode. So Question is. If serial cable, maybe chance to dump something as you can port to UART...
Best Regards
delete.......
I use usb->serial-ttl 3.3V converter with 528K resistor on pins 4-5 for outputing diag message. And you need JIG with 301K resistor for entering to download mode.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=12689198&postcount=181
Thanx for this info, but tooo difficult for me to understand.
Please help to make such cable for research... or maybe their are existing cables to buy?
I need something like this:
http://www.badanation.de/topic.php?t=1616&page=fst_unread&highlight=widerstand
Such Pictures would be nice:
http://h-3.abload.de/img/p1000660eei7.jpg
I need FULL Pinout please for S8500.
Thanx in advance.
Best Regards
You mean cable/plug for enter download mode? You can buy it. For example in Poland I can buy this for 12 zlotys = 3 euro + delivery costs.
I found that, for Galaxy S, but is possible this is the same
forum.xda-developers.com/showthread.php?t=819551
I "need" alternate cable for communication between PC and S8500.
Also FULL Pinout is welcome.
Best Regards
http://forum.xda-developers.com/showthread.php?t=820275
Here seems few infos... maybe also work for S8500.
Best Regards
After I saw successfully log from srg.mstr.
Thank you very much.
http://forum.xda-developers.com/showpost.php?p=13426392&postcount=183
Less then 1 Euro for male Connector:
http://www.conrad.de/ce/de/product/733923/MICRO-USB-STECKER-TYP-B-5POL/SHOP_AREA_40306
So I will buy few Connectors...
Now I will make checklist for other parts and prices. As I have no cables at home to cut...
Best Regards
TX<-->2
RX<-->3
GND<-->5
resistor between 4<-->5
http://forum.xda-developers.com/showpost.php?p=13293404&postcount=174
Will try to make such cable this year... in 2013 really.
Checklist...
http://www.conrad.de/ce/de/product/...Kabelmontage-ohne-Gehaeuse-BKL-Electronic-Inh
.
.
.
Best Regards
Will try to make such cable this year...
Click to expand...
Click to collapse
Uupsi, only 2 months left... but I have found other way for Bootlog...
via JTAG RAM dump... something above 0x40000000...
Looks like this:
http://forum.xda-developers.com/showpost.php?p=47037737&postcount=34
Best Regards
2013 soon over... but Mission UART is not over...
New attempt... for 2014...
It seems now "cheap" USB stuff available... based on PL2303... symbolic Photo attached...
According to this Pic...
http://forum.xda-developers.com/showpost.php?p=13426392&postcount=183
Other idea is to solder direct to RX TX and GND on PCB... instead resistor...
Maybe...
Best Regards
Short tested with 3 wires soldered direct to RX TX and Ground under battery/label...
Hmm... first test failed with WinComm... maybe my settings are wrong, will try other Tool for Logging...
Best Regards
Btw...
Never seen S5250 or S8600 user trying to capture data over UART...
:silly:
Code:
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
[BM : ] FSR_BML_GetFullPartI() is completed
[BM : ] stPartI.nNumOfPartEntry : 7
[BM : ] 1th PartEntrt(nAttr:0x1002)(nID:0x0)
[BM : ] [1th] pPEntry->n1stVun : 1
[BM : ] [1th] pPEntry->nNumOfUnits : 7
[BM : ] [1th] pPEntry->nLoadAddr : 0x0
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42480000
[BOOT_V1.0 (May 28 2010, 21:22:23)]
SelectBootingMode: H/W...0xe.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
S6E63M0 : LDI_Pentile_Set_Change Pentile_Value =6c
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Flash_Unlock failed
Poweron status - c0
FSA9480 0x03 Register = 0
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 0
FSA9480 0x07 Register = 1f
Used WinComm as Tool...
Stupid me not realized that TX connect to RX and RX to TX... :cyclops:
Best Regards
Code:
[PAM: ] ++FSR_PAM_Init
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
bl3_info_block 1 and 2 not found, Load BL3
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42080000
[BOOT_V1.0 (Jan 5 2012, 19:08:14)]
SelectBootingMode: H/W...0xe.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
S6E63M0 : LDI_Pentile_Set_Change Pentile_Value =6c
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Flash_Unlock failed
Poweron status - 0
FSA9480 0x03 Register = 0
FSA9480 0x0A Register = 4
FSA9480 0x0B Register = 0
FSA9480 0x07 Register = 1f
Display_LSI_Boot : disp_Main_Clean
Display_LSI_Boot : disp_Main_Clean_All
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_dimming_backlight
LDI_S6E63M0_Set_Brightness is Return (Level: 1)
Display_LSI_Boot : disp_dimming_backlight
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
+SDHC_Open(Ch0)
univ_SD_MEM_PowerOnDevice() : Power On
univ_SD_MEM_PowerOnDevice(ch0) : MASSMEMORY_EN Power On
[SDHC] MPLL source clock from SYSCON : 667000000Hz
[SDHC] SDHC(ch0) source clock from SYSCON : 47642000Hz
[SDHC] SDHC(ch0) Operating Clock : 372203Hz
[SDHC][MMC]byte mode
SD_MEM_Phy_CMD2(ch0) : CID(127~0) : 0x150100, 0x4d324731, 0x44441655, 0x3c7886d
SD_MEM_Phy_Check_moviNAND_Version(ch0) : PRV - 0x16
MMC_Spec = 4
----------------CSD Version 1.0--------in low level-------------
channel: [0]
One Block Size: [512]Byte
Total card Block Count = [4014080]
Total card Capacity Size = [1960]MB
---------------------------------------------------
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0x400f
SD_MEM_Phy_TransferState(ch0) :High: Tx : SD_FeedBackClock_BasicDelay
SD_MEM_Phy_TransferState(ch0) :High: Rx : SD_FeedBackClock_InverterDelay
[SDHC] MPLL source clock from SYSCON : 667000000Hz
[SDHC] SDHC(ch0) source clock from SYSCON : 47642000Hz
[SDHC] SDHC(ch0) Operating Clock : 47642000Hz
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0xf
SD_HostCtrl_IssueCommand[ch0] not SDclk off, cmd13, SD_CLK_CTRL:0xf
-SDHC_Open(Ch0)
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_ModemInit!!!!!!!!!!!!!!!!!
DRV_CopyQSCBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
DRV_Modem_BootingStart retry count = 0.
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Display_LSI_Boot : disp_Main_Dload_Update
Display_LSI_Boot : disp_Main_Dload_Message
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.86-g5b25f8d ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Tue Nov 5 22:35:53 CET 2013
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: wave
Memory policy: ECC disabled, Data cache writeback
CPU S5PV210/S5PC110 (id 0x43110222)
<7>s5pv210_init_clocks: initializing clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<4>s3c24xx_register_clock: new clock sclk_csis, id -1, dev (null) uses same enable bit as mout_csis, id -1, dev (null)
<4>s3c24xx_register_clock: new clock lcd, id -1, dev (null) uses same enable bit as sclk_fimd, id -1, dev (null)
<4>s3c24xx_register_clock: new clock mfc, id -1, dev (null) uses same enable bit as sclk_mfc, id -1, dev (null)
<4>s3c24xx_register_clock: new clock iis, id 0, dev (null) uses same enable bit as i2s_v50, id 0, dev (null)
<7>s5pv210_setup_clocks: registering clocks
<7>s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00400400
<7>s5pv210_setup_clocks: xtal is 24000000
<6>S5PV210: PLL settings, A=800000000, M=667000000, E=80000000 V=54000000<6>S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000
HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
<6>sclk_dmc: source is mout_mpll (1), rate is 166750000
<6>sclk_onenand: source is hclk_dsys (1), rate is 83375000
<6>sclk: source is mout_mpll (6), rate is 133400000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk: source is mout_mpll (6), rate is 66700000
<6>sclk_mixer: source is sclk_dac (0), rate is 54000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_fimc: source is ext_xtal (0), rate is 24000000
<6>sclk_cam: source is xusbxti (1), rate is 24000000
<6>sclk_cam: source is ext_xtal (0), rate is 24000000
<6>sclk_fimd: source is mout_mpll (6), rate is 133400000
<6>sclk_mmc: source is mout_mpll (6), rate is 51307692
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mmc: source is mout_mpll (6), rate is 47642857
<6>sclk_mfc: source is sclk_a2m (0), rate is 200000000
<6>sclk_fimg2d: source is sclk_a2m (0), rate is 200000000
<6>sclk: source is mout_mpll (1), rate is 66700000
<6>sclk_csis: source is ext_xtal (0), rate is 24000000
<6>sclk_spi: source is mout_epll (7), rate is 80000000
<6>sclk_spi: source is mout_epll (7), rate is 80000000
<6>sclk_pwi: source is ext_xtal (0), rate is 24000000
<6>sclk_pwm: source is ext_xtal (0), rate is 24000000
<6>sclk_mdnie: source is mout_mpll (6), rate is 166750000
<6>sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
<6>s5p: 11534336 bytes system memory reserved for mfc at 0x24500000, 0-bank base(0x24500000)
<6>s5p: 11534336 bytes system memory reserved for mfc at 0x4f3f4000, 1-bank base(0x4f3f4000)
<6>s5p: 11534336 bytes system memory reserved for fimc0 at 0x4e8f4000, 1-bank base(0x4e8f4000)
<6>s5p: 11534336 bytes system memory reserved for fimc2 at 0x4ddf4000, 1-bank base(0x4ddf4000)
<6>s5p: 4194304 bytes system memory reserved for jpeg at 0x24500000, 0-bank base(0x24500000)
<6>s5p: 7680000 bytes system memory reserved for fimd at 0x4d6a1000, 1-bank base(0x4d6a1000)
<7>On node 0 totalpages: 72621
<7> Normal zone: 1534 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 71087 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 71087
<5>Kernel command line: init=/init loglevel=4
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 69MB 214MB 0MB = 283MB total
<5>Memory: 272496k/325052k available, 17988k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0000000 - 0xfc000000 ( 192 MB)
lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0617000 (6204 kB)
.text : 0xc0617000 - 0xc0ce8000 (6980 kB)
.data : 0xc0ce8000 - 0xc0d34880 ( 307 kB)
.bss : 0xc0d348a4 - 0xc0e76ad8 (1289 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:339
<6>VIC @fc000000: id 0x00041192, vendor 0x41
<6>VIC @fc010000: id 0x00041192, vendor 0x41
<6>VIC @fc020000: id 0x00041192, vendor 0x41
<6>VIC @fc030000: id 0x00041192, vendor 0x41
<6>mult[140737]
<6>max_delta_ns[2937815369]
<6>min_delta_ns[30517]
<6>rate[32768]
<6>HZ[256]
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... <c>795.12 BogoMIPS (lpj=1554432)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>ram_console: got buffer at 4ff00400, size fec00
<6>ram_console: uncorrectable error in header
<6>ram_console: no valid data in buffer (sig = 0xfeffdfff)
<6>console [ram-1] enabled
<6>S5PC110 Hardware version : EVT1
<6>HWREV is 0xf
S3C Power Management, Copyright 2004 Simtec Electronics
<6>pmstats at 4ffff000
<3>invalid media device
<3>invalid media device
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>S5PV210: Initializing architecture
<6>s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
<6>s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
<6>s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
<6>s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
<6>print_constraints: pd_audio_supply: 5000 mV normal
<6>print_constraints: pd_cam_supply: 5000 mV normal
<6>print_constraints: pd_tv_supply: 5000 mV normal
<6>print_constraints: pd_lcd_supply: 5000 mV normal
<6>print_constraints: pd_g3d_supply: 5000 mV normal
<6>print_constraints: pd_mfc_supply: 5000 mV normal
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
<6>i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
<3>max8998 6-0066: No interrupt base specified, no interrupts
<3>i2:10, buck2_idx:0
<6>print_constraints: VALIVE_1.2V: 1200 mV
<6>print_constraints: VUSB_1.1V: 1100 mV
<6>print_constraints: VADC_3.3V: 3300 mV
<6>print_constraints: VTF_2.8V: 2800 mV
<6>print_constraints: VLCD_1.8V: 1800 mV
<6>print_constraints: VUSB_3.3V: 3300 mV
<6>print_constraints: VCC_2.8V_PDA: 2800 mV
<6>print_constraints: CAM_AF_2.8V: 2800 mV
<6>print_constraints: CAM_SENSOR_1.2V: 1200 mV
<6>print_constraints: CAM_SENSOR_A2.8V: 2800 mV
<6>print_constraints: CAM_ISP_1.8V: 1800 mV
<6>print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
<6>print_constraints: VGA_DVDD_1.8V: 1800 mV
<6>print_constraints: VCC_3.0V_LCD: 2800 <--> 3200 mV at 3200 mV
<6>print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
<6>print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
<6>print_constraints: VCC_1.8V: 1800 mV
<6>print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
<6>print_constraints: USB_VBUS_AP:
<6>print_constraints: USB_VBUS_CP:
<6>i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
<6>i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)
<6>i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
<6>i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)
<6>i2c-gpio i2c-gpio.12: using pins 199 (SDA) and 200 (SCL)
<6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>Switching to clocksource clock_source_systimer
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switched to NOHz mode on CPU #0
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>PMU: registered new PMU device of type 0
<4>clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
<6>wake enabled for irq 165
<6>wake disabled for irq 165
<6>S5PV210 ADC driver, (c) 2010 Samsung Electronics
<6>Loaded driver for PL330 DMAC-0 s3c-pl330
<6> DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
<6>Loaded driver for PL330 DMAC-1 s3c-pl330
<6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>Loaded driver for PL330 DMAC-2 s3c-pl330
<6> DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>ashmem: initialized
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<7>yaffs: yaffs built Nov 5 2013 22:34:00 Installing.
<6>msgmni has been set to 532
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler row registered (default)
<6>io scheduler cfq registered
<6>io scheduler sio registered
MDNIE INIT ..........
<6>S3C MDNIE Driver, (c) 2010 Samsung Electronics
MDNIE INIT SUCCESS Addr : 0xf003c000
IELCD INIT ..........
<6>S3C IELCD Driver, (c) 2010 Samsung Electronics
IELCD INIT SUCCESS Addr : 0xf0040000
<6>s3cfb s3cfb: [fb2] dma: 0x4db06000, cpu: 0xf0400000, size: 0x002ee000
<6>FIMD src sclk = 166750000
<6>s3cfb s3cfb: pixclock adjusted from 39019 to 41979
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
[mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
<6>s3cfb_late_resume is called
<6>FIMD src sclk = 166750000
<6>s3cfb s3cfb: pixclock adjusted from 41979 to 41979
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x10)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)
<6>[mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)
[mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(6), current_mDNIe_OutDoor_OnOff(0)
<3>panel_reset_lcd
<6>s3cfb_late_resume is complete
<6>s3cfb s3cfb: registered successfully
<6>s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
<6>s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
<6>s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
PA FB = 0x4DB06000, bits per pixel = 32
screen width=480 height=800 va=0xedb06000 pa=0x4db06000
xres_virtual = 480, yres_virtual = 1600, xoffset = 0, yoffset = 0
fb_size=3072000
Back frameBuffer[0].VAddr=edc7d000 PAddr=4dc7d000 size=1536000
No space for NV12 video carveout
<6>brd: module loaded
<6>loop: module loaded
<6>Android kernel panic handler initialized (bind=kpanic)
<6>sec_jack_probe : Registering jack driver
<6>wake enabled for irq 38
<6>sec_jack_init_jack_state<6>sec_jack_set_micbias_state: HWREV=15, on=1
<6>handle_jack_not_inserted
<6>sec_jack_set_micbias_state: HWREV=15, on=0
<6>sec_jack_set_micbias_state: HWREV=15, on=0
<6>wake enabled for irq 167
<6>fsa9480 7-0025: dev1: 0x4, dev2: 0x0
<4>i2c-core: driver [fsa9480] using legacy suspend method
<4>i2c-core: driver [fsa9480] using legacy resume method
<6>modem_io_init done
<6>[MODEM] bp_irq() - PHONE_ACTIVE interrupt, 1 occurence
<6>wake enabled for irq 47
<6>wake enabled for irq 43
<6>modemctl probed
<6>Muxed OneNAND 512MB 1.8V 16-bit (0x50)
<6>OneNAND version = 0x013e
<7>Chip support all block unlock
<7>Chip has 4KiB pagesize
<7>Chip has cache program feature
<6>Scanning device for bad blocks
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x1dd addr8 0x0
<6>OneNAND eraseblock 477 is an initial bad block
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x6cf addr8 0x0
<6>OneNAND eraseblock 1743 is an initial bad block
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x73f addr8 0x0
<6>OneNAND eraseblock 1855 is an initial bad block
<6>OneNAND eraseblock 2047 is an initial bad block
<5>Creating 2 MTD partitions on "(null)":
<5>0x00001e700000-0x00001ec00000 : "nv_data"
<5>0x000003300000-0x000003600000 : "fota"
<6>tl2796: c0, b-6bea38dc, got v 2051000, factory wants 2051000
<6>tl2796: c1, b-7f519b2b, got v 2044000, factory wants 2044000
<6>tl2796: c2, b-ae797fc2, got v 1491000, factory wants 1491000
<6>tl2796_probe successfully probed
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode)
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=2
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<7>Registered gadget driver 'android_usb'
<6>input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
<6>input: s5pv210-keypad as /devices/platform/s5pv210-keypad/input/input1
<6>usbcore: registered new interface driver xpad
<6>usbcore: registered new interface driver usb_acecad
<6>acecad: v3.2:USB Acecad Flair tablet driver
<6>usbcore: registered new interface driver aiptek
<6>aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006<6>usbcore: registered new interface driver hanwang
<6>usbcore: registered new interface driver kbtab
<6>kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>usbcore: registered new interface driver wacom
<6>wacom: v1.52:USB Wacom tablet driver
<6>input: mxt224_ts_input as /devices/virtual/input/input2
<6>Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171
<6>bma023 5-0038: bma023 found
<6>bma023 5-0038: al_version=2, ml_version=1
<6>input: accelerometer_sensor as /devices/virtual/input/input3
<3>gp2a: proximity val = 1
<6>input: proximity as /devices/virtual/input/input4
<6>input: orientation_sensor as /devices/virtual/input/input5
<6>max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>using rtc device, s3c, for alarms<6>s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
<6>i2c /dev entries driver
<6>lirc_dev: IR Remote Control driver registered, major 251
<6>IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
<6>IR LIRC bridge handler initialized
<6>Linux video capture interface: v2.00
<6>mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
<6>S3C JPEG Driver, (c) 2007 Samsung Electronics
<6>JPEG driver for S5PV210
<4>i2c-core: driver [s5p_ddc] using legacy suspend method
<4>i2c-core: driver [s5p_ddc] using legacy resume method
<4>i2c-core: driver [Si4709] using legacy suspend method
<4>i2c-core: driver [Si4709] using legacy resume method
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
<6>mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
<6>s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
<6>mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
<6>s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
<6>s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
<6>mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<6>zram: num_devices not specified. Using default: 1
<6>zram: Creating 1 devices ...
<6>WM8994 Audio Codec 0.1
wm8994_extensions: initializing driver v10
<6>s3c_idma_preallocate_buffer: VA-f00c0000 PA-C0000000 163840bytes
<6>asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
<6>ALSA device list:
<6> #0: smdkc110
<6>oprofile: using arm/armv7
<6>GACT probability NOT on
<6>Mirror/redirect action on
<6>u32 classifier
<6> Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (4257 buckets, 17028 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>xt_time: kernel timezone is -0000
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>TCP cubic registered
<6>NET: Registered protocol family 10
<6>mmc0: new high speed MMC card at address 0001
<6>Mobile IPv6
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>mmcblk0: mmc0:0001 M2G1DD 1.91 GiB
<6>IPv6 over IPv4 tunneling driver
<6> mmcblk0: p1 p2 p3
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>NET: Registered protocol family 35
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
<6>ThumbEE CPU extension supported.
<6>s5pv210_cpufreq_init: S5PV210 cpu-freq driver
<6>regulator_init_complete: pd_mfc_supply: disabling
<6>regulator_init_complete: pd_tv_supply: disabling
<6>regulator_init_complete: pd_cam_supply: disabling
## wifi_probe
wifi_set_power = 1
wifi_set_carddetect = 1
<4>mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<6>mmc1: new SDIO card at address 0001
F1 signature read @0x18000000=0x9934329
DHD: dongle ram size is set to 294912(orig 294912)
wl_create_event_handler thr:3d started
dhd_attach thr:3e started
dhd_attach thr:3f started
dhd_attach thr:40 started
Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
Dongle Host Driver, version 5.90.195.104
Compiled in drivers/net/wireless/bcmdhd on Nov 5 2013 at 22:34:41
wifi_set_power = 0
=========== WLAN placed in RESET ========
<6>s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
<6>s3c-rtc s3c2410-rtc: setting system clock to 2010-12-31 23:07:37 UTC (1293836857)
<6>FIMC0 registered successfully
<6>FIMC1 registered successfully
<6>FIMC2 registered successfully
<6>S5P TVOUT Driver, (c) 2010 Samsung Electronics
<4>clk_get: could not find clock mout_vpll_src for dev s5p_device_tvout+0x8/0xd8 (s5p-tvout)
<3>failed to find clock "mout_vpll_src"
<6>s5p-tvout s5p-tvout: hpd status: cable removed/not connected
<6>s5p_tv_probe TV Probing is done
<6>max8998_charger_probe : MAX8998 Charger Driver Loading
<6>max8998_charger_probe : pmic interrupt registered
<6>check_lpm_charging_mode : lpm_charging_mode(0)
<6>wake enabled for irq 39
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 0
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<6>max8998_set_cable : status(1)
<7>max8998_charging_control : USB charging enabled
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 21606
discharging reason : 0
<4>Warning: unable to open an initial console.
<7>init_post begin
<6>Freeing init memory: 6204K
<7>max8998_charging_control : USB charging enabled
OHAI, stage1 init starting
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 6 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 56 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
<3>bio too big device loop0 (2 > 0)
<3>EXT4-fs (loop0): unable to read superblock
<6>EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
<7>s3c_bat_discharge_reason : Current charge level : 50%
Current time : 80 discharging_time : 21606
discharging reason : 0
<7>max8998_charging_control : USB charging enabled
stage1 log:
Fri Dec 31 23:07:37 GMT 2010
Creating filesystem with parameters:
Size: 18874368
Block size: 4096
Blocks per group: 32768
Inodes per group: 1152
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 4608
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/1152 inodes and 1110/4608 blocks
Creating filesystem with parameters:
Size: 419430400
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1600
Label:
Blocks: 102400
Block groups: 4
Reserved block group size: 31
Created filesystem with 11/25600 inodes and 3310/102400 blocks
force_recovery: 1
losetup: /dev/loop0: No such file or directory
mount: mounting /dev/loop0 on /system failed: Invalid argument
umount: can't umount /system: Invalid argument
losetup: /dev/loop2: No such device or address
losetup: /dev/loop0: No such device or address
5708 blocks
Fri Dec 31 23:09:02 GMT 2010
<3>init: cannot open '/initlogo.rle'
.
.
.
Taken from XXLA1 with zImage only... cm-10.1-wave-v2.1...
Interesting to see this...
Code:
<6>Memory: 69MB 214MB 0MB = 283MB total
<5>Memory: 272496k/325052k available, 17988k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff000000 - 0xffe00000 ( 14 MB)
vmalloc : 0xf0000000 - 0xfc000000 ( 192 MB)
lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0617000 (6204 kB)
.text : 0xc0617000 - 0xc0ce8000 (6980 kB)
.data : 0xc0ce8000 - 0xc0d34880 ( 307 kB)
.bss : 0xc0d348a4 - 0xc0e76ad8 (1289 kB)
Best Regards
This is my solution for now... with S8500. Tested by me.
In theory should work with S8530 too...
Later I will move to cable solution with Micro USB + Resistor...
Then hopefully this is working also with S8600 and S5250 for instance...
Best Regards
http://forum.xda-developers.com/showpost.php?p=41670635&postcount=5
In this FPM Mode... I can use AT Commands via UART...
So for now I can read and write something via UART...
Later more...
Best Regards
Made today few stupid mistakes....
510 R instead K...
Then confuse Pin 4 and 5 ...
I have 510 KOHM, but nothing happens...
Maybe not correct enough...
http://forum.xda-developers.com/showthread.php?t=820275
Code:
RID_FM_BOOT_ON_UART, /* 1 1 1 0 1 [B]619K[/B] Factory Mode Boot ON-UART */
I have used 620 KOHM with S8500 and S8600...
Factory Test Mode start ... this thingie with blue then green Screen... but nothing UART out nor input...
Maybe my wires wrong...
Will buy more Resistors...
Best Regards
Edit 1.
No idea yet, where is my mistake...
http://www.droidforums.net/forum/dr...own-motorola-factory-cable-4.html#post2234017
Backside Pinout...
I have now 510 KOHM + 13 KOHM = 523 KOHM...
Flashed to XXJEB to be sure...
Edit 2.
Check up...
My USB converter is alive...
Pin 4 and 5 should be correct, because Resistor Values working...
Will change Pin 2 and 3...
My fault...
For S8530 and S8500 now working.
Code:
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] FSR_PAM_InitNANDController Success!!
[PAM: ] --FSR_PAM_Init
bl3_info_block 1 age = 17
bl3_info_block 2 age = 18
BL3_2 Loading
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42080000
[BOOT_V1.0 (Jan 5 2012, 19:05:00)]
SelectBootingMode: H/W...0x3.
[BOOT] ARMCLK: 400000 KHz, MSYSHCLK 200000 KHz,MSYSPCLK: 100000 KHz, [BOOT] DSYSHCLK 166750 KHz,DSYSPCLK: 83375 KHz,PSYSHCLK: 133400 KHz, PSYSPCLK: 66700 KHz,SYSCON_A2M: 200000 KHz
Flash_Unlock failed
Poweron status - 20
FSA9480 0x03 Register = 1
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 8
FSA9480 0x07 Register = 1c
SelectBootingMode: Boot Mode = 1...
+++FIMD_Drv_INITIALIZE
FIMD_Drv_ChangeMode: MDNIE_MODE
Frame Rate:62 SCLK_FIMD:133400 kHz ClkDiv:4
---FIMD_Drv_INITIALIZE
---FIMD_Drv_SetWinOnOff(WIN4:1)
LCD initialize Finished
Display_LSI_Boot : disp_Main_Clean
Display_LSI_Boot : disp_Main_Clean_All
Display_LSI_Boot : disp_dimming_backlight
Display_LSI_Boot : disp_Normal_Init
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_ModemInit!!!!!!!!!!!!!!!!!
DRV_CopyQSCBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
DRV_Modem_BootingStart retry count = 0.
AST_POWERON
get_usb_sw_nv 0x40000
USBSwitch : AP
get_uart_sw_nv 0x40000
UARTSwitch : AP
My S8530 first UART output... with cable.
On XXKK5 with S8600 no luck... will try older Firmware...
Best Regards
Edit 1.
S8000 Jet
Code:
USBSwitch : AP
[BB31] VDD INT 1.2V
[BB31] VDD ARM 1.325V
ARM Clock: 400MHz --> 800MHz
[BOOT][DBG] RST_STAT 0x7E00_F904 : 0x00000001
[BOOT] ARMCLK: 800000, MPLL: 194000, HCLKX2: 266666, HCLK: 133333, PCLK: 33333
BootHWCheck: 6...
SelectBootingMode: H/W...0x6.
Poweron status - 10
pPowerOn 0 = 0xB00717E3
pPowerOn 1 = 0x0
pPowerOn 2 = 0x0
pPowerOn 3 = 0x10
pPowerOn 4 = 0x0
pPowerOn 5 = 0x0
pPowerOn 6 = 0x0
pPowerOn 7 = 0x0
pPowerOn 8 = 0x0
pPowerOn 9 = 0x0
pPowerOn 10 = 0x0
pPowerOn 11 = 0x0
pPowerOn 12 = 0x6
pPowerOn 13 = 0x0
FSA9480 0x03 Register = 1
FSA9480 0x0A Register = 0
FSA9480 0x0B Register = 8
FSA9480 0x07 Register = 1C
SelectBootingMode: Boot Mode = 1...
================================
LCD Source CLK -> MPLL(194000)
================================
uClkVal = 0x7 , uClkDir = 0x1
========================================
uVidconReg = 0x1D4 , uClkVal = 0x7
========================================
DRV_modem_reset!!!!!!!!!!!!!!!!!
DRV_Send_DBL!!!!!!!!!!!!!!!!!
[DLOAD] Download Completed !!!
DRV_Wait_MSMInit!!!!!!!!!!!!!!!!!
DRV_CopyMSMBootBinary!!!!!!!!!!!!!!!!!
DRV_Send_BootBinaryCopyComplete!!!!!!!!!!!!!!!!!
Ownership Release 0x5DFFF800, 0x0
AST_POWERON
get_usb_sw_nv 0x0
USBSwitch : AP
get_uart_sw_nv 0x0
UARTSwitch : AP
Drv_TaskEntry Start
DRV_Device_Init...
DRV_Device_Init...: DRV_hwversion = 6.
FSA9480 device ID = 40
JIT UART OFF NU_PWM_FID_SET_GPIO_PWMTOUT ok
prox_sensor_init SUCCESS~~~~~~~~~~~
[BOOT][Err] LCD_DET set PULLDOWN .
[LCD] ESD interrupt enable
acc_sensor_init SUCCESS~~~~~~~~~~~
pif_TaskEntry Start
[MODEMIF_AP_Init] NU_Create_Task pif task success
Create TESTMODE_Queue
Create testmode_task
Create TMFIFO_Queue
Create TESTMODE_RPT_Timer
brcm_bluetooth_main: Start Bluetooth Thread by BootEntry
0002 000.082 0.001.00.00:0000 SYSTEM > MochaTask: OSAL created.
0003 000.084 0.001.00.00:0000 BOOTMGR > MochaTask: OSAL created.
0004 000.091 0.001.00.00:0000 BOOTMGR > MochaTask: UART, USB, and Bluetooth created.
usb_api_open
usb_api_open
0005 000.100 0.001.00.00:0000 SYSTEM > MochaTask: DiagMgr created.
0006 000.106 0.001.00.00:0000 BOOTMGR > MochaTask: DiagMgr created.
0007 000.112 0.001.00.00:0000 EXCEPTION > __MemAllocForDebugHeap: Allocate 1200Kbytes (file OEM\OemDevFIFO.c, line 106)
0008 000.122 0.001.00.00:0000 AGENT > [__SysSecureBootRegisterPktRcvCallback:SysSecureBootPacket.c] __SysSecureBootRegisterPktRcvCallback is called!
0009 000.136 0.001.-1.-1:0000 BOOTMGR > MochaTask: EventMgr created.
0010 000.144 0.001.-1.-1:0000 BOOTMGR > MochaTask: AvMedia created.
0011 000.148 0.001.-1.-1:0000 ALL > DevGetHomeDLFlag : Address(0x0f940000) flag(0x0000ffff)
0012 000.157 0.001.-1.-1:0000 BOOTMGR > MochaTask: Clock created.
0013 000.162 0.001.-1.-1:0000 BOOTMGR > MochaTask: LED created.
0014 000.168 0.001.-1.-1:0000 BOOTMGR > MochaTask: Flip created.
0015 000.174 0.001.-1.-1:0000 SYSTEM > MochaTask: Clock, LED, Flip created.
+SDHC_Open(Ch1)
[SDHC] SDHC(ch1) Operating Clock : 378906Hz
[DS] data_srvc_task() Enter
[DS] diag_srvc_task() Enter
Diag_TaskEntry Start
I9000 tested with success...
So my cable work now with diffferent Samsung handsets...
Accept S8600 ...
Tested also with XXKJ7...
Need few days. Then test with S5250 will follow...
http://forum.xda-developers.com/showthread.php?t=1901376
I9001 is little bit similar to S8600... maybe helpfull.
Also usefull about UART:
http://forum.xda-developers.com/showthread.php?t=1209288
http://forum.xda-developers.com/showthread.php?t=1629359
Best Regards
UART on S5250 work, but not much info... yet...
Code:
AST_POWERON
*MRDY: 1
,~Booting Completed
This is output, if DL Mode...
Code:
AST_DOWNLOAD
I can set UART Logging temporary...
More text...
Best Regards
Hello people,
Are there any tools for viewing and editing the amss.bin?
HEX Editor...
IDA...
Brain.
Best Regards
adfree said:
HEX Editor...
IDA...
Brain.
Best Regards
Click to expand...
Click to collapse
with revskill i got this with amss.bin
#define UNLOADED_FILE 1
#include <idc.idc>
static main() {
MakeName(0x00079B70, "Memcmp");
MakeName(0x00062160, "Memcpy");
MakeName(0x0022E924, "Memcpy");
MakeName(0x0006216B, "Memcpy_Generic");
MakeName(0x0022E92F, "Memcpy_Generic");
MakeName(0x000621D0, "__rt_udiv");
MakeName(0x00079F8C, "__rt_udiv");
MakeName(0x00062334, "strlen");
MakeName(0x0007A2C4, "strlen");
MakeName(0x00070DB2, "diag_sp");
MakeName(0x00062298, "strcmp");
MakeName(0x0007A1D8, "strcmp");
MakeName(0x0007A360, "strncpy");
MakeName(0x00072502, "diag_pkt");
MakeName(0x00062F00, "__rt_div0");
MakeName(0x0007D324, "__rt_div0");
MakeName(0x00062F10, "__32__rt_raise");
MakeName(0x0007F1F8, "__32__rt_raise");
MakeName(0x00ACC3A8, "rex_int_lock_32");
MakeName(0x00072330, "subsys_getid");
MakeName(0x0007A548, "vsprintf");
MakeName(0x00062004, "MemClr");
MakeName(0x0022E7C8, "MemClr");
MakeName(0x000725CC, "diag_subsystem");
MakeName(0x0006EC72, "diag_hdlr");
MakeName(0x000726D2, "diag_hdlr");
MakeName(0x00083D86, "diag_hdlr");
MakeName(0x00085432, "diag_hdlr");
}
What about it ?
@Tigrouzen, no segment found at 0x00079B70 etc
amss it's regular elf with a bunch of segments
Code:
Name : LOAD
Start : 0x001E7000
End : 0x001EE000
Length: 0x00007000
----------------------
Name : LOAD
Start : 0x001F0000
End : 0x001F1000
Length: 0x00001000
----------------------
Name : LOAD
Start : 0x001F2000
End : 0x005D8000
Length: 0x003E6000
----------------------
Name : LOAD
Start : 0x005D8000
End : 0x00CDB000
Length: 0x00703000
----------------------
Name : LOAD
Start : 0x00CDB000
End : 0x00D11000
Length: 0x00036000
----------------------
Name : LOAD
Start : 0x00D11000
End : 0x00DAF000
Length: 0x0009E000
----------------------
Name : LOAD
Start : 0x00DAF000
End : 0x00DB9000
Length: 0x0000A000
----------------------
Name : LOAD
Start : 0x00DB9000
End : 0x00E9B000
Length: 0x000E2000
----------------------
Name : LOAD
Start : 0x00E9C000
End : 0x01BF9000
Length: 0x00D5D000
----------------------
Name : LOAD
Start : 0x01BF9000
End : 0x01D05000
Length: 0x0010C000
----------------------
Name : LOAD
Start : 0x01FF0000
End : 0x01FF006C
Length: 0x0000006C
----------------------
Name : LOAD
Start : 0xB0000000
End : 0xB0010CE7
Length: 0x00010CE7
----------------------
Name : LOAD
Start : 0xB0040000
End : 0xB0057000
Length: 0x00017000
----------------------
Name : LOAD
Start : 0xB0100000
End : 0xB0107207
Length: 0x00007207
----------------------
Name : LOAD
Start : 0xB0140000
End : 0xB01401B8
Length: 0x000001B8
----------------------
Name : LOAD
Start : 0xB0200000
End : 0xB0208CF3
Length: 0x00008CF3
----------------------
Name : LOAD
Start : 0xB0240000
End : 0xB024028C
Length: 0x0000028C
----------------------
Name : LOAD
Start : 0xB0400000
End : 0xB040DBE8
Length: 0x0000DBE8
----------------------
Name : LOAD
Start : 0xB0600000
End : 0xB0602000
Length: 0x00002000
----------------------
Name : LOAD
Start : 0xB0602000
End : 0xB0604000
Length: 0x00002000
----------------------
Name : LOAD
Start : 0xF0000000
End : 0xF001F878
Length: 0x0001F878
----------------------
Name : LOAD
Start : 0xF0020000
End : 0xF0026000
Length: 0x00006000
load amss.bin with TriX, dump decoded stage (elf format) and analyze with disassembler (e.g. IDA)
Ok guys i extract certificate from Amss S8530 XEJL2, bootloader segments full info fsbl sbl...
Also i can dump complete NAND and find segment and algorith for RC1 too
This is appscompressed.bin algorythme
0x01ca7750 RIPEMD128+160+MD4
0x01ca7750 SEAL+MD4 key
appcomp hash :
SHA1 : EB55C6690ACAF40BB2F845313F58BFE9C3BC529D
SHA224 : AAC3E2B65CC9F33BB7EDDA3DEB541CA9E8919422CC179B4D2B49F39BAE008F00
SHA256 : 580D3DB21E41A9FE588AE544266040FABA8AF044E739971E77F2B1272323D0B6
SHA256-HTC : A44BC029D7F952750003D9695ED7B464E446D34EEF5BD9665487E4C2BF81F669
MD4 : B3BD8310FF2C4C05E2044FD491814792
MD5 : 7220779D1094C5F7789094DC75BA4E9E
CRC16 (0x1189) : F4EA
CRC30 (Block: 0x1000, Page: 0x200) : 0BD214AA
CRC30 (Block: 0x2000, Page: 0x400) : 0A28A17A
CRC32 (0xEDB88320) : 313F4EF2
CRC32 (0x04C11DB7) : 90B01704
CRC32 HTC (0xEDB88320) : B55B60A7
ECC Reed Solomon (parity 10) : 43702DA1FDAC4DB2023B
ECC BCH Micron 3 byte : 818144
ECC Hamming Toshiba (8 bit - 0x200 bytes) : C00FC3
ECC Hamming (8 bit - 0x200 bytes) : FF3CF3
ECC Hamming (16 bit - 0x200 bytes) : 3FCFFC
Amss algo :
0x0007fce0 CRC-16 norm
0x0007fee0 CRC-16 inv
0x0007f8e0 CRC-30
0x0007eb50 CRC30 Function
0x00b66194 CRC-32
0x00b66394 CRC32 Function
0x000800e0 CRC-32 Xilinx
0x0007eb58 CRC32 Xilinx Function
0x000800e4 CRC32 Xilinx Function
0x00c3c490 DES RAW Spbox
0x00c39381 RSA PKCS SHA1/RIPEND Digest
0x00c39390 MD2 S
0x00463548 SHA2 table
0x008fcc88 SHA2 table
0x00b6eb14 ZDeflate
0x0041a28c SHA1+MD4+MD5 init
0x008fcb08 SHA1+MD4+MD5 init
0x00c3d7f8 SHA1+MD4+MD5 init
0x0041a29c SHA1+MD4+MD5 key1
0x008fcb18 SHA1+MD4+MD5 key1
0x00c3d808 SHA1+MD4+MD5 key1
0x001a9844 SHA1+MD4+MD5 key2
0x0041ac1c SHA1+MD4+MD5 key2
0x008fcb1c SHA1+MD4+MD5 key2
0x001a9848 SHA1+MD4+MD5 key3
0x0041ac20 SHA1+MD4+MD5 key3
0x008fcb20 SHA1+MD4+MD5 key3
0x00463648 SHA2 init table
0x008fcd88 SHA2 init table
0x00c3d80c SHA2 init table
0x0046364c SHA2 init table
0x008fcd8c SHA2 init table
0x00c3d810 SHA2 init table
0x00419980 RIPEMD128+160+MD4
0x008fcaf8 RIPEMD128+160+MD4
0x00bdcca0 RIPEMD128+160+MD4
0x001a9844 MD5
0x0041ac1c MD5
0x008fcb1c MD5
0x00419980 SEAL+MD4 key
0x008fcaf8 SEAL+MD4 key
0x00bdcca0 SEAL+MD4 key
0x004fc7af HTC PUBLIC KEY
E9079DBB2452104990982132470BA20B7C795D1B4690B718B62FCD38D71D4E458FAF320374B89D5236C79BD57D2BA2D3508A4A605B0D48CB8CA5478BFE4D7D32AB0AE072BC367A9615F002D5023A617B422FEC1EF8DAD772D75E9C4F06EF624B864699A3F080D1B8E192B921D159852B2DC798F752B4F1FA529FF123D9963F73
0x00708134 Sober 128
0x00c3cd90 Sober 128 SBox
Possible algos little endian: 45
0x00315f6c AES te
Possible algos big endian: 1
Amss hash :
SHA1 : C59C5785E823E5E1CA9BE05DB6F55F8C8AC1BBA3
SHA224 : 5F50CED13C1204068E443919706B53D866271DAB1CFB5A9CB07A953CAE008F00
SHA256 : D86C7634FE07806D3B87701EC7F72F25DAAFAC7C40CA1D370C1ABA5840C091C0
SHA256-HTC : 120F70AECE78B8DCF69DCD79F020AB00AE17572123BA21274D6F6EE280774A09
MD4 : 7703DF5B1074392D4B91ECA23BAC9D92
MD5 : 22197F8AAD6A2CB4394E1B4E63EB843C
CRC16 (0x1189) : FAC5
CRC30 (Block: 0x1000, Page: 0x200) : 311AE4C7
CRC30 (Block: 0x2000, Page: 0x400) : 295DFC29
CRC32 (0xEDB88320) : 8DB21A34
CRC32 (0x04C11DB7) : 7B94B6A4
CRC32 HTC (0xEDB88320) : 08450BBC
ECC Reed Solomon (parity 10) : A04D69B134A126F3FD15
ECC BCH Micron 3 byte : 000000
ECC Hamming Toshiba (8 bit - 0x200 bytes) : FFFFFF
ECC Hamming (8 bit - 0x200 bytes) : FFFFFF
ECC Hamming (16 bit - 0x200 bytes) : FFFFFF
Amms certificat :
https://rapidshare.com/files/3061245812/1.cer
Well, the main idea was ..., to get some tools with which the amss.bin for bada v1.2 and v2 can be modified to work for the American/Australian version of the wave. Looks like there are some hardware differences and this file is containing information needed for the RF module.
Looks like there are some hardware differences and this file is containing information needed for the RF module
Click to expand...
Click to collapse
No idea if Hardware differences, but I'm pretty sure there are different Config/Calibration data...
Check out NV items... AMSS + NV items = Qualcomm related part...
http://www.samsunguniverse.com/forum/s8500-can-work-with-qualcomm-tools-t199.html
You could take an look on FCC documents for maybe Hardware check...
Best Regards
I think gambal refers to UMTS bands, Europe is different than in America.
UMTS bands in America are 850 - 1900
UMTS bands in Europe are 2100
bada 1.2 and above only works with Euro bands (these updates hasn't oficially released in America), so as we know the file "amss.bin" contains the parameters that define which bands to work, would be good to try to edit the information to compile a new "amss.bin" to work with American bands ..
Many Americans would be happy!
...would be good to try to edit the information to compile a new "amss.bin" to work with American bands ...
Click to expand...
Click to collapse
But you are really sure that not NV items differ?
Maybe easier to compare NV items...
Best Regards
You mean to compare amss NV items from a 1.0 American firmware and another 1.2 European firmware?
I was import to a .Qcn file a list of NV items of my mobile (bada 1.0 american), i will compare with another one of 1.2.
It's posible to create more NV items if is necesary?
sorry for double post.
i've compared NV items of my phone, first with a 1.0 american firmware then with a 1.2 European firmware..
EDIT: thought that there were no differences because the file size was identical, but looking more attentively i find some, i will continue researching,
You tried QPST or which Tool?
And are sure there are no differences?
I have 2x S8500... with QPST difference 10 NV items + one S8500 has 10 more
Content not checked... too lazy at this time.
Best Regards
Edit 1.
File Summary:
Phone Model: 19 [QSC6270/QSC6240], Configuration Name: default, Total NV Item Count: 305
Click to expand...
Click to collapse
File Summary:
Phone Model: 19 [QSC6270/QSC6240], Configuration Name: default, Total NV Item Count: 319
Click to expand...
Click to collapse
And these are only the "official" NV items... and not the hidden one...
Example...
Code:
NV item: [B]2608[/B] [NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I], index 0
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 0: 12 3d fc ff 9c 3c fc ff 26 3c fc ff b0 3b fc ff
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 1: 34 3b fc ff af 3a fc ff 2a 3a fc ff a6 39 fc ff
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 2: 22 39 fc ff 9f 38 fc ff 0c 38 fc ff 65 37 fc ff
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 3: be 36 fc ff 18 36 fc ff 73 35 fc ff ce 34 fc ff
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 4: 2a 34 fc ff 87 33 fc ff e5 32 fc ff 43 32 fc ff
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 5: a2 31 fc ff 01 31 fc ff 61 30 fc ff c2 2f fc ff
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 6: 23 2f fc ff 85 2e fc ff 85 2e fc ff 85 2e fc ff
NV_GSM_850_AMPM_MASTER_TBL_SEG8_F1_I 7: 85 2e fc ff 85 2e fc ff 85 2e fc ff 85 2e fc ff
sorry for my english, I mean to say that i find some differences..
between 2 firmwares, I find 40 differents NV items using "RF NV items Manager" program.
Example:
European 1.2 Firm:
Code:
NV item: 5059 [NV_WCDMA_2100_TX_LIN_MASTER_0_ENH_I], index 0
NV item: 5061 [NV_WCDMA_900_TX_PDM_LIN_0_ENH_I], index 0
American 1.0 Firm:
Code:
NV item: 5064 [NV_WCDMA_1900_TX_PDM_LIN_0_ENH_I], index 0
NV item: 5060 [NV_WCDMA_800_TX_PDM_LIN_0_ENH_I], index 0
(it's look like these items manage the umts network)
This are 2 items of 40 that I find.. So, I imported all 40 1.0 American Firmware Nv Items to the 1.2 Euro Firmwared Phone, (using previous modified .QCN file) then, i restart the device, but nothing happen, still no find UMTS network... But i want believe that we are close to find the solution
If I use PSAS to Display the new added NV items, these appear as "inactive item" and those already on the phone appears lile "bad parameter"
not know what else I can try...
Even if NV items count is different. Dump of NV area will be always the same in size. Area in oneNAND reserved for NV data is constant, and in most it's just empty space, filled with zeros.
Is it possible to dump whole NV items list using QPST? Can you guys do that and send dumps to me?
If not please search for following NV items and send me values you get (if you get any)
Int id 556
Int id 5
Int id 7
Int id 1403
String id 254
String id 387
String id 388
String id 256
String id 197
I want to prove some theory just taken from Bada kernel and need few different values to compare. These should contain Timezone, Locale and SimBlock settings. (If these NV items are even available)
Please send me PMs with dumps if you get any. Thanks in advance.
Tell me when you are ready "amms.bin" to "bada 2.0" so I can put it on my phone. I'm from Argentina. Thank you very much!
Rebellos said:
Int id 556
Int id 5
Int id 7
Int id 1403
Click to expand...
Click to collapse
With "PSAS" display "Inactive Item", and with "RV NV item manager" i don't these id's..
@adfree
Hey, if I wrote in phone (with "RV NV item manager") some NV items, is not take any effect... does exist another step to "activate" these items or some? maybe in Stune have to add any parameter? or maybe the "QPST Service program" tool..
I have fear of breaking the handset really... I just wan't to calibrate the UMTS bands, need these:
WCDMA_II_PCS_1900
WCDMA_V_850
http://forum.xda-developers.com/showpost.php?p=12436452&postcount=1
Other way to access NV items.
Now you can backup with sTune for instance... folders:
Code:
[B]NV
nvm[/B]
EXTREME Caution!
Some IDs are protected... so you can maybe write/activate, but not easily remove change = brick...
Best Regards
a little question..
there is a firmware of S8530 which has bada 1.2 and 850/900/2100Mhz 3g bands capable... there are firmwares prepared for Brazil and Australia.
it's posible to flash that amss.bin in a S8500 with bada 1.2?
I tried this, but the bootloader says "error erase amms"
amss.bin in a S8500 with bada 1.2?
Click to expand...
Click to collapse
If I remember correct, then yes...
Maybe not all combinations...
BUT check Multiloader ... adresses are different...
So you have to edit...
Later more.
Maybe give Link to this S8530 Firmware, so I can take an look or try for you...
Best Regards
Hi,
I am using the E975 Singapore Set.
I received a OTA update notification that was about 3.8mb today. My phone was rooted and bootloader unlocked (through FreeGee). I unrooted through SuperUser and restored bootloader to locked through FreeGee. After this, I went ahead to install the OTA update. However, I forgot to uninstall SuperUser and I think this screwed it all up. My phone became softbricked.
So I looked around for a solution and found this: http://forum.xda-developers.com/showthread.php?t=2249500
I managed to enter recovery mode into TWRP.
However when I got there, the terminal/console showed:
Updating partition details...
E:Unable to mount '/system'
E:Unable to mount storage.
Thus, I cannot access my the sdcard storage to recover.
a) Do I require root to access /system and mount storage?
i. If so, was this caused by me not deleting SuperUser, resulting in partial root/unroot?
Also, when I entered TWRP, it asked for a password that I don't remember setting.
Help!
you could just flash stock rom with kdz updater.You will lose everything on the phone, but you will repair it
kimitza said:
you could just flash stock rom with kdz updater.You will lose everything on the phone, but you will repair it
Click to expand...
Click to collapse
Thanks for the quick reply!!
I tried that, but I got this. My phone will boot into boatloader / fastboot screen (with the image lying down Android mascot's front open) when at Call fn_StartUpgrade and it will stay there for very long until it produces the rest of the messages.
imgur dot com/rN59aFk.png?1
Full Log:
[R&D Test Tools Log File]
17:21:15 : Launching SW update
17:21:15 : Unpacking KDZ
17:21:33 : KDZ file extraced
17:21:54 : Files were extracted.
17:21:54 : LGMobileDL Load.
17:21:54 : Port = -1
17:21:54 : Connecting to phone
17:22:09 : Check Phone mode = 2
17:22:09 : Phone type check.......
17:22:09 : LGMobileDL.DLL Loading....
17:22:09 : _SetAuthMark Fail
17:22:09 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
17:22:09 : _SetAuthMark Fail
17:22:09 : LoadCDMAPhoneData() Error
17:22:09 : _DetachDLL Call
17:22:09 : _DetachDLL Call End
17:22:09 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\E97510g_00.dz
17:22:09 : Param : moduleDir =
17:22:09 : Param : waitTime = 0
17:22:09 : Param : UsbHighSpeed = 1
17:22:09 : Param : PhoneMode = 2
17:22:09 : Param : BinVersion = E97510G_00_2
17:22:09 : Param : AuthMark = 0
17:22:09 : Call fn_StartUpgrade
17:25:04 : CDMA: wParam = 100, lParam = 210
17:25:04 : Step : Upgrade Error2 - Error Code : 210
17:25:04 : ResetStartInfo() Call
17:25:04 : _DetachDLL Call
17:25:04 : _DetachDLL Call End
17:25:04 : FreeLibrary Call
17:25:04 : FreeLibrary Call End
17:25:04 : ResetStartInfo() Call End
17:25:06 : ===FINISHED===
17:25:15 : OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
Are you sure you entered download mode before starting update?
Sorry for asking this,but it's the only idea i'm getting now .
Also,do you use a laptop or a desktop?if you are using a desktop, please plug the phone on rear usb port,not frontal and not through a usb hub.
You could save that log and atach it.
notinpu even
kimitza said:
Are you sure you entered download mode before starting update?
Sorry for asking this,but it's the only idea i'm getting now .
Also,do you use a laptop or a desktop?if you are using a desktop, please plug the phone on rear usb port,not frontal and not through a usb hub.
You could save that log and atach it.
Click to expand...
Click to collapse
Definitely in Download Mode. Using my laptop.
I'm thinking because I tried the TeenyBin method first, it screwed up the KDZ method.
Have any idea how I can solve the mount issue?
Btw, when it stops at the Call fn_startUpgrade message, my PC give a 3 beep sound my phone is at the boatloader / fastboot screen (with the image lying down Android mascot's front open).
Like this: www dot gaggl.com/wp-content/uploads/2012/05/fastboot.jpg
Miracle
Wow, my problem is solved.
1) I tried the KDZ method again, ran into the same problem, stuck at fastboot screen.
2) Disconnected device and went into Download Mode again and connected back to the PC.
3) I just let it sit there, while looking for other solutions when suddenly..
4) It starts to boot up! (Altho it showed one error message that was too small for me to see).
Sweet!!
Ruined my Saturday though but better than perma-brick!
Apparently, the log shows that the process didn't complete though.. Confusing
Full Log:
[R&D Test Tools Log File]
21:49:48 : Launching SW update
21:49:48 : Unpacking KDZ
21:50:16 : KDZ file extraced
21:50:37 : Files were extracted.
21:50:37 : LGMobileDL Load.
21:50:37 : Port = -1
21:50:37 : Connecting to phone
21:50:49 : Check Phone mode = 2
21:50:49 : Phone type check.......
21:50:49 : LGMobileDL.DLL Loading....
21:50:49 : _SetAuthMark Fail
21:50:49 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
21:50:49 : _SetAuthMark Fail
21:50:49 : LoadCDMAPhoneData() Error
21:50:49 : _DetachDLL Call
21:50:49 : _DetachDLL Call End
21:50:49 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\E97510g_00.dz
21:50:49 : Param : moduleDir =
21:50:49 : Param : waitTime = 0
21:50:49 : Param : UsbHighSpeed = 1
21:50:49 : Param : PhoneMode = 2
21:50:49 : Param : BinVersion = E97510G_00_2
21:50:49 : Param : AuthMark = 0
21:50:49 : Call fn_StartUpgrade
21:52:37 : CDMA: wParam = 13, lParam = 5
21:52:37 : Step : DSP Write
21:52:40 : CDMA: wParam = 13, lParam = 6
21:52:40 : Step : DSP Write
21:52:46 : CDMA: wParam = 13, lParam = 7
21:52:46 : Step : DSP Write
21:52:53 : CDMA: wParam = 13, lParam = 8
21:52:53 : Step : DSP Write
21:52:56 : CDMA: wParam = 13, lParam = 9
21:52:56 : Step : DSP Write
21:53:00 : CDMA: wParam = 13, lParam = 10
21:53:00 : Step : DSP Write
21:53:03 : CDMA: wParam = 13, lParam = 11
21:53:03 : Step : DSP Write
21:53:06 : CDMA: wParam = 13, lParam = 12
21:53:06 : Step : DSP Write
21:53:10 : CDMA: wParam = 13, lParam = 13
21:53:10 : Step : DSP Write
21:53:13 : CDMA: wParam = 13, lParam = 14
21:53:13 : Step : DSP Write
21:53:17 : CDMA: wParam = 13, lParam = 15
21:53:17 : Step : DSP Write
21:53:21 : CDMA: wParam = 13, lParam = 16
21:53:21 : Step : DSP Write
21:53:25 : CDMA: wParam = 13, lParam = 17
21:53:25 : Step : DSP Write
21:53:29 : CDMA: wParam = 13, lParam = 18
21:53:29 : Step : DSP Write
21:53:32 : CDMA: wParam = 13, lParam = 19
21:53:32 : Step : DSP Write
21:53:35 : CDMA: wParam = 13, lParam = 20
21:53:35 : Step : DSP Write
21:53:38 : CDMA: wParam = 13, lParam = 21
21:53:38 : Step : DSP Write
21:53:42 : CDMA: wParam = 13, lParam = 22
21:53:42 : Step : DSP Write
21:53:45 : CDMA: wParam = 13, lParam = 23
21:53:45 : Step : DSP Write
21:53:49 : CDMA: wParam = 13, lParam = 24
21:53:49 : Step : DSP Write
21:53:49 : CDMA: wParam = 20, lParam = 432
21:53:49 : Model Dll Msg Not Found(20, 432)
21:53:52 : CDMA: wParam = 13, lParam = 25
21:53:52 : Step : DSP Write
21:53:55 : CDMA: wParam = 13, lParam = 26
21:53:55 : Step : DSP Write
21:53:58 : CDMA: wParam = 13, lParam = 27
21:53:58 : Step : DSP Write
21:54:01 : CDMA: wParam = 13, lParam = 28
21:54:01 : Step : DSP Write
21:54:04 : CDMA: wParam = 13, lParam = 29
21:54:04 : Step : DSP Write
21:54:07 : CDMA: wParam = 13, lParam = 30
21:54:07 : Step : DSP Write
21:54:10 : CDMA: wParam = 13, lParam = 31
21:54:10 : Step : DSP Write
21:54:13 : CDMA: wParam = 13, lParam = 32
21:54:13 : Step : DSP Write
21:54:16 : CDMA: wParam = 13, lParam = 33
21:54:16 : Step : DSP Write
21:54:20 : CDMA: wParam = 13, lParam = 34
21:54:20 : Step : DSP Write
21:54:23 : CDMA: wParam = 13, lParam = 35
21:54:23 : Step : DSP Write
21:54:26 : CDMA: wParam = 13, lParam = 36
21:54:26 : Step : DSP Write
21:54:29 : CDMA: wParam = 13, lParam = 37
21:54:29 : Step : DSP Write
21:54:32 : CDMA: wParam = 13, lParam = 38
21:54:32 : Step : DSP Write
21:54:35 : CDMA: wParam = 13, lParam = 39
21:54:35 : Step : DSP Write
21:54:39 : CDMA: wParam = 13, lParam = 40
21:54:39 : Step : DSP Write
21:54:42 : CDMA: wParam = 13, lParam = 41
21:54:42 : Step : DSP Write
21:54:45 : CDMA: wParam = 13, lParam = 42
21:54:45 : Step : DSP Write
21:54:48 : CDMA: wParam = 13, lParam = 43
21:54:48 : Step : DSP Write
21:54:53 : CDMA: wParam = 13, lParam = 44
21:54:53 : Step : DSP Write
21:54:53 : CDMA: wParam = 20, lParam = 324
21:54:53 : Model Dll Msg Not Found(20, 324)
21:54:56 : CDMA: wParam = 13, lParam = 45
21:54:56 : Step : DSP Write
21:55:01 : CDMA: wParam = 13, lParam = 46
21:55:01 : Step : DSP Write
21:55:04 : CDMA: wParam = 13, lParam = 47
21:55:04 : Step : DSP Write
21:55:07 : CDMA: wParam = 13, lParam = 48
21:55:07 : Step : DSP Write
21:55:10 : CDMA: wParam = 13, lParam = 49
21:55:10 : Step : DSP Write
21:55:13 : CDMA: wParam = 13, lParam = 50
21:55:13 : Step : DSP Write
21:55:17 : CDMA: wParam = 13, lParam = 51
21:55:17 : Step : DSP Write
21:55:20 : CDMA: wParam = 13, lParam = 52
21:55:20 : Step : DSP Write
21:55:23 : CDMA: wParam = 13, lParam = 53
21:55:23 : Step : DSP Write
21:55:26 : CDMA: wParam = 13, lParam = 54
21:55:26 : Step : DSP Write
21:55:29 : CDMA: wParam = 13, lParam = 55
21:55:29 : Step : DSP Write
21:55:32 : CDMA: wParam = 13, lParam = 56
21:55:32 : Step : DSP Write
21:55:35 : CDMA: wParam = 13, lParam = 57
21:55:35 : Step : DSP Write
21:55:39 : CDMA: wParam = 13, lParam = 58
21:55:39 : Step : DSP Write
21:55:42 : CDMA: wParam = 13, lParam = 59
21:55:42 : Step : DSP Write
21:55:45 : CDMA: wParam = 13, lParam = 60
21:55:45 : Step : DSP Write
21:55:49 : CDMA: wParam = 13, lParam = 61
21:55:49 : Step : DSP Write
21:55:53 : CDMA: wParam = 13, lParam = 62
21:55:53 : Step : DSP Write
21:55:56 : CDMA: wParam = 13, lParam = 63
21:55:56 : Step : DSP Write
21:55:59 : CDMA: wParam = 13, lParam = 64
21:55:59 : Step : DSP Write
21:55:59 : CDMA: wParam = 20, lParam = 216
21:55:59 : Model Dll Msg Not Found(20, 216)
21:56:02 : CDMA: wParam = 13, lParam = 65
21:56:02 : Step : DSP Write
21:56:05 : CDMA: wParam = 13, lParam = 66
21:56:05 : Step : DSP Write
21:56:08 : CDMA: wParam = 13, lParam = 67
21:56:08 : Step : DSP Write
21:56:13 : CDMA: wParam = 13, lParam = 68
21:56:13 : Step : DSP Write
21:56:17 : CDMA: wParam = 13, lParam = 69
21:56:17 : Step : DSP Write
21:56:20 : CDMA: wParam = 13, lParam = 70
21:56:20 : Step : DSP Write
21:56:24 : CDMA: wParam = 13, lParam = 71
21:56:24 : Step : DSP Write
21:56:28 : CDMA: wParam = 13, lParam = 72
21:56:28 : Step : DSP Write
21:56:32 : CDMA: wParam = 13, lParam = 73
21:56:32 : Step : DSP Write
21:56:36 : CDMA: wParam = 13, lParam = 74
21:56:36 : Step : DSP Write
21:56:40 : CDMA: wParam = 13, lParam = 75
21:56:40 : Step : DSP Write
21:56:44 : CDMA: wParam = 13, lParam = 76
21:56:44 : Step : DSP Write
21:56:49 : CDMA: wParam = 13, lParam = 77
21:56:49 : Step : DSP Write
21:56:53 : CDMA: wParam = 13, lParam = 78
21:56:53 : Step : DSP Write
21:56:57 : CDMA: wParam = 13, lParam = 79
21:56:57 : Step : DSP Write
21:57:01 : CDMA: wParam = 13, lParam = 80
21:57:01 : Step : DSP Write
21:57:04 : CDMA: wParam = 13, lParam = 81
21:57:04 : Step : DSP Write
21:57:09 : CDMA: wParam = 13, lParam = 82
21:57:09 : Step : DSP Write
21:57:12 : CDMA: wParam = 13, lParam = 83
21:57:12 : Step : DSP Write
21:57:15 : CDMA: wParam = 13, lParam = 84
21:57:15 : Step : DSP Write
21:57:15 : CDMA: wParam = 20, lParam = 108
21:57:15 : Model Dll Msg Not Found(20, 108)
21:57:18 : CDMA: wParam = 13, lParam = 85
21:57:18 : Step : DSP Write
21:57:21 : CDMA: wParam = 13, lParam = 86
21:57:21 : Step : DSP Write
21:57:25 : CDMA: wParam = 13, lParam = 87
21:57:25 : Step : DSP Write
21:57:28 : CDMA: wParam = 13, lParam = 88
21:57:28 : Step : DSP Write
21:57:31 : CDMA: wParam = 13, lParam = 89
21:57:31 : Step : DSP Write
21:57:35 : CDMA: wParam = 13, lParam = 90
21:57:35 : Step : DSP Write
21:57:38 : CDMA: wParam = 13, lParam = 91
21:57:38 : Step : DSP Write
21:57:41 : CDMA: wParam = 13, lParam = 92
21:57:41 : Step : DSP Write
21:57:45 : CDMA: wParam = 13, lParam = 93
21:57:45 : Step : DSP Write
21:57:48 : CDMA: wParam = 13, lParam = 94
21:57:48 : Step : DSP Write
21:58:00 : CDMA: wParam = 13, lParam = 95
21:58:00 : Step : DSP Write
21:58:12 : CDMA: wParam = 13, lParam = 96
21:58:12 : Step : DSP Write
21:58:24 : CDMA: wParam = 13, lParam = 97
21:58:24 : Step : DSP Write
21:58:36 : CDMA: wParam = 13, lParam = 98
21:58:36 : Step : DSP Write
21:58:48 : CDMA: wParam = 13, lParam = 99
21:58:48 : Step : DSP Write
21:58:53 : CDMA: wParam = 2001, lParam = 1
21:58:53 : Model Dll Msg Not Found(2001, 1)
thanks
thanks man!!!! You saved me!!!!!!!!!!!!!!!!
beefslayer said:
Wow, my problem is solved.
1) I tried the KDZ method again, ran into the same problem, stuck at fastboot screen.
2) Disconnected device and went into Download Mode again and connected back to the PC.
3) I just let it sit there, while looking for other solutions when suddenly..
4) It starts to boot up! (Altho it showed one error message that was too small for me to see).
Sweet!!
Ruined my Saturday though but better than perma-brick!
Apparently, the log shows that the process didn't complete though.. Confusing
Full Log:
[R&D Test Tools Log File]
21:49:48 : Launching SW update
21:49:48 : Unpacking KDZ
21:50:16 : KDZ file extraced
21:50:37 : Files were extracted.
21:50:37 : LGMobileDL Load.
21:50:37 : Port = -1
21:50:37 : Connecting to phone
21:50:49 : Check Phone mode = 2
21:50:49 : Phone type check.......
21:50:49 : LGMobileDL.DLL Loading....
21:50:49 : _SetAuthMark Fail
21:50:49 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
21:50:49 : _SetAuthMark Fail
21:50:49 : LoadCDMAPhoneData() Error
21:50:49 : _DetachDLL Call
21:50:49 : _DetachDLL Call End
21:50:49 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\E97510g_00.dz
21:50:49 : Param : moduleDir =
21:50:49 : Param : waitTime = 0
21:50:49 : Param : UsbHighSpeed = 1
21:50:49 : Param : PhoneMode = 2
21:50:49 : Param : BinVersion = E97510G_00_2
21:50:49 : Param : AuthMark = 0
21:50:49 : Call fn_StartUpgrade
21:52:37 : CDMA: wParam = 13, lParam = 5
21:52:37 : Step : DSP Write
21:52:40 : CDMA: wParam = 13, lParam = 6
21:52:40 : Step : DSP Write
21:52:46 : CDMA: wParam = 13, lParam = 7
21:52:46 : Step : DSP Write
21:52:53 : CDMA: wParam = 13, lParam = 8
21:52:53 : Step : DSP Write
21:52:56 : CDMA: wParam = 13, lParam = 9
21:52:56 : Step : DSP Write
21:53:00 : CDMA: wParam = 13, lParam = 10
21:53:00 : Step : DSP Write
21:53:03 : CDMA: wParam = 13, lParam = 11
21:53:03 : Step : DSP Write
21:53:06 : CDMA: wParam = 13, lParam = 12
21:53:06 : Step : DSP Write
21:53:10 : CDMA: wParam = 13, lParam = 13
21:53:10 : Step : DSP Write
21:53:13 : CDMA: wParam = 13, lParam = 14
21:53:13 : Step : DSP Write
21:53:17 : CDMA: wParam = 13, lParam = 15
21:53:17 : Step : DSP Write
21:53:21 : CDMA: wParam = 13, lParam = 16
21:53:21 : Step : DSP Write
21:53:25 : CDMA: wParam = 13, lParam = 17
21:53:25 : Step : DSP Write
21:53:29 : CDMA: wParam = 13, lParam = 18
21:53:29 : Step : DSP Write
21:53:32 : CDMA: wParam = 13, lParam = 19
21:53:32 : Step : DSP Write
21:53:35 : CDMA: wParam = 13, lParam = 20
21:53:35 : Step : DSP Write
21:53:38 : CDMA: wParam = 13, lParam = 21
21:53:38 : Step : DSP Write
21:53:42 : CDMA: wParam = 13, lParam = 22
21:53:42 : Step : DSP Write
21:53:45 : CDMA: wParam = 13, lParam = 23
21:53:45 : Step : DSP Write
21:53:49 : CDMA: wParam = 13, lParam = 24
21:53:49 : Step : DSP Write
21:53:49 : CDMA: wParam = 20, lParam = 432
21:53:49 : Model Dll Msg Not Found(20, 432)
21:53:52 : CDMA: wParam = 13, lParam = 25
21:53:52 : Step : DSP Write
21:53:55 : CDMA: wParam = 13, lParam = 26
21:53:55 : Step : DSP Write
21:53:58 : CDMA: wParam = 13, lParam = 27
21:53:58 : Step : DSP Write
21:54:01 : CDMA: wParam = 13, lParam = 28
21:54:01 : Step : DSP Write
21:54:04 : CDMA: wParam = 13, lParam = 29
21:54:04 : Step : DSP Write
21:54:07 : CDMA: wParam = 13, lParam = 30
21:54:07 : Step : DSP Write
21:54:10 : CDMA: wParam = 13, lParam = 31
21:54:10 : Step : DSP Write
21:54:13 : CDMA: wParam = 13, lParam = 32
21:54:13 : Step : DSP Write
21:54:16 : CDMA: wParam = 13, lParam = 33
21:54:16 : Step : DSP Write
21:54:20 : CDMA: wParam = 13, lParam = 34
21:54:20 : Step : DSP Write
21:54:23 : CDMA: wParam = 13, lParam = 35
21:54:23 : Step : DSP Write
21:54:26 : CDMA: wParam = 13, lParam = 36
21:54:26 : Step : DSP Write
21:54:29 : CDMA: wParam = 13, lParam = 37
21:54:29 : Step : DSP Write
21:54:32 : CDMA: wParam = 13, lParam = 38
21:54:32 : Step : DSP Write
21:54:35 : CDMA: wParam = 13, lParam = 39
21:54:35 : Step : DSP Write
21:54:39 : CDMA: wParam = 13, lParam = 40
21:54:39 : Step : DSP Write
21:54:42 : CDMA: wParam = 13, lParam = 41
21:54:42 : Step : DSP Write
21:54:45 : CDMA: wParam = 13, lParam = 42
21:54:45 : Step : DSP Write
21:54:48 : CDMA: wParam = 13, lParam = 43
21:54:48 : Step : DSP Write
21:54:53 : CDMA: wParam = 13, lParam = 44
21:54:53 : Step : DSP Write
21:54:53 : CDMA: wParam = 20, lParam = 324
21:54:53 : Model Dll Msg Not Found(20, 324)
21:54:56 : CDMA: wParam = 13, lParam = 45
21:54:56 : Step : DSP Write
21:55:01 : CDMA: wParam = 13, lParam = 46
21:55:01 : Step : DSP Write
21:55:04 : CDMA: wParam = 13, lParam = 47
21:55:04 : Step : DSP Write
21:55:07 : CDMA: wParam = 13, lParam = 48
21:55:07 : Step : DSP Write
21:55:10 : CDMA: wParam = 13, lParam = 49
21:55:10 : Step : DSP Write
21:55:13 : CDMA: wParam = 13, lParam = 50
21:55:13 : Step : DSP Write
21:55:17 : CDMA: wParam = 13, lParam = 51
21:55:17 : Step : DSP Write
21:55:20 : CDMA: wParam = 13, lParam = 52
21:55:20 : Step : DSP Write
21:55:23 : CDMA: wParam = 13, lParam = 53
21:55:23 : Step : DSP Write
21:55:26 : CDMA: wParam = 13, lParam = 54
21:55:26 : Step : DSP Write
21:55:29 : CDMA: wParam = 13, lParam = 55
21:55:29 : Step : DSP Write
21:55:32 : CDMA: wParam = 13, lParam = 56
21:55:32 : Step : DSP Write
21:55:35 : CDMA: wParam = 13, lParam = 57
21:55:35 : Step : DSP Write
21:55:39 : CDMA: wParam = 13, lParam = 58
21:55:39 : Step : DSP Write
21:55:42 : CDMA: wParam = 13, lParam = 59
21:55:42 : Step : DSP Write
21:55:45 : CDMA: wParam = 13, lParam = 60
21:55:45 : Step : DSP Write
21:55:49 : CDMA: wParam = 13, lParam = 61
21:55:49 : Step : DSP Write
21:55:53 : CDMA: wParam = 13, lParam = 62
21:55:53 : Step : DSP Write
21:55:56 : CDMA: wParam = 13, lParam = 63
21:55:56 : Step : DSP Write
21:55:59 : CDMA: wParam = 13, lParam = 64
21:55:59 : Step : DSP Write
21:55:59 : CDMA: wParam = 20, lParam = 216
21:55:59 : Model Dll Msg Not Found(20, 216)
21:56:02 : CDMA: wParam = 13, lParam = 65
21:56:02 : Step : DSP Write
21:56:05 : CDMA: wParam = 13, lParam = 66
21:56:05 : Step : DSP Write
21:56:08 : CDMA: wParam = 13, lParam = 67
21:56:08 : Step : DSP Write
21:56:13 : CDMA: wParam = 13, lParam = 68
21:56:13 : Step : DSP Write
21:56:17 : CDMA: wParam = 13, lParam = 69
21:56:17 : Step : DSP Write
21:56:20 : CDMA: wParam = 13, lParam = 70
21:56:20 : Step : DSP Write
21:56:24 : CDMA: wParam = 13, lParam = 71
21:56:24 : Step : DSP Write
21:56:28 : CDMA: wParam = 13, lParam = 72
21:56:28 : Step : DSP Write
21:56:32 : CDMA: wParam = 13, lParam = 73
21:56:32 : Step : DSP Write
21:56:36 : CDMA: wParam = 13, lParam = 74
21:56:36 : Step : DSP Write
21:56:40 : CDMA: wParam = 13, lParam = 75
21:56:40 : Step : DSP Write
21:56:44 : CDMA: wParam = 13, lParam = 76
21:56:44 : Step : DSP Write
21:56:49 : CDMA: wParam = 13, lParam = 77
21:56:49 : Step : DSP Write
21:56:53 : CDMA: wParam = 13, lParam = 78
21:56:53 : Step : DSP Write
21:56:57 : CDMA: wParam = 13, lParam = 79
21:56:57 : Step : DSP Write
21:57:01 : CDMA: wParam = 13, lParam = 80
21:57:01 : Step : DSP Write
21:57:04 : CDMA: wParam = 13, lParam = 81
21:57:04 : Step : DSP Write
21:57:09 : CDMA: wParam = 13, lParam = 82
21:57:09 : Step : DSP Write
21:57:12 : CDMA: wParam = 13, lParam = 83
21:57:12 : Step : DSP Write
21:57:15 : CDMA: wParam = 13, lParam = 84
21:57:15 : Step : DSP Write
21:57:15 : CDMA: wParam = 20, lParam = 108
21:57:15 : Model Dll Msg Not Found(20, 108)
21:57:18 : CDMA: wParam = 13, lParam = 85
21:57:18 : Step : DSP Write
21:57:21 : CDMA: wParam = 13, lParam = 86
21:57:21 : Step : DSP Write
21:57:25 : CDMA: wParam = 13, lParam = 87
21:57:25 : Step : DSP Write
21:57:28 : CDMA: wParam = 13, lParam = 88
21:57:28 : Step : DSP Write
21:57:31 : CDMA: wParam = 13, lParam = 89
21:57:31 : Step : DSP Write
21:57:35 : CDMA: wParam = 13, lParam = 90
21:57:35 : Step : DSP Write
21:57:38 : CDMA: wParam = 13, lParam = 91
21:57:38 : Step : DSP Write
21:57:41 : CDMA: wParam = 13, lParam = 92
21:57:41 : Step : DSP Write
21:57:45 : CDMA: wParam = 13, lParam = 93
21:57:45 : Step : DSP Write
21:57:48 : CDMA: wParam = 13, lParam = 94
21:57:48 : Step : DSP Write
21:58:00 : CDMA: wParam = 13, lParam = 95
21:58:00 : Step : DSP Write
21:58:12 : CDMA: wParam = 13, lParam = 96
21:58:12 : Step : DSP Write
21:58:24 : CDMA: wParam = 13, lParam = 97
21:58:24 : Step : DSP Write
21:58:36 : CDMA: wParam = 13, lParam = 98
21:58:36 : Step : DSP Write
21:58:48 : CDMA: wParam = 13, lParam = 99
21:58:48 : Step : DSP Write
21:58:53 : CDMA: wParam = 2001, lParam = 1
21:58:53 : Model Dll Msg Not Found(2001, 1)
Click to expand...
Click to collapse
Thanx Man
You saved me and my Phone .
Your trick just Worked and Stock rom flashed by KDZ _ SW _Updater
Miracle v2...
La desconexión y reconexión fue la clave para solucionar el problema. También el cambio de 3GQCT a CDMA.
Gracias! Thank you!
beefslayer said:
Wow, my problem is solved.
1) I tried the KDZ method again, ran into the same problem, stuck at fastboot screen.
2) Disconnected device and went into Download Mode again and connected back to the PC.
3) I just let it sit there, while looking for other solutions when suddenly..
4) It starts to boot up! (Altho it showed one error message that was too small for me to see).
Sweet!!
Ruined my Saturday though but better than perma-brick!
Apparently, the log shows that the process didn't complete though.. Confusing
Full Log:
[R&D Test Tools Log File]
21:49:48 : Launching SW update
21:49:48 : Unpacking KDZ
21:50:16 : KDZ file extraced
21:50:37 : Files were extracted.
21:50:37 : LGMobileDL Load.
21:50:37 : Port = -1
21:50:37 : Connecting to phone
21:50:49 : Check Phone mode = 2
21:50:49 : Phone type check.......
21:50:49 : LGMobileDL.DLL Loading....
21:50:49 : _SetAuthMark Fail
21:50:49 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
21:50:49 : _SetAuthMark Fail
21:50:49 : LoadCDMAPhoneData() Error
21:50:49 : _DetachDLL Call
21:50:49 : _DetachDLL Call End
21:50:49 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\E97510g_00.dz
21:50:49 : Param : moduleDir =
21:50:49 : Param : waitTime = 0
21:50:49 : Param : UsbHighSpeed = 1
21:50:49 : Param : PhoneMode = 2
21:50:49 : Param : BinVersion = E97510G_00_2
21:50:49 : Param : AuthMark = 0
21:50:49 : Call fn_StartUpgrade
21:52:37 : CDMA: wParam = 13, lParam = 5
21:52:37 : Step : DSP Write
21:52:40 : CDMA: wParam = 13, lParam = 6
21:52:40 : Step : DSP Write
21:52:46 : CDMA: wParam = 13, lParam = 7
21:52:46 : Step : DSP Write
21:52:53 : CDMA: wParam = 13, lParam = 8
21:52:53 : Step : DSP Write
21:52:56 : CDMA: wParam = 13, lParam = 9
21:52:56 : Step : DSP Write
21:53:00 : CDMA: wParam = 13, lParam = 10
21:53:00 : Step : DSP Write
21:53:03 : CDMA: wParam = 13, lParam = 11
21:53:03 : Step : DSP Write
21:53:06 : CDMA: wParam = 13, lParam = 12
21:53:06 : Step : DSP Write
21:53:10 : CDMA: wParam = 13, lParam = 13
21:53:10 : Step : DSP Write
21:53:13 : CDMA: wParam = 13, lParam = 14
21:53:13 : Step : DSP Write
21:53:17 : CDMA: wParam = 13, lParam = 15
21:53:17 : Step : DSP Write
21:53:21 : CDMA: wParam = 13, lParam = 16
21:53:21 : Step : DSP Write
21:53:25 : CDMA: wParam = 13, lParam = 17
21:53:25 : Step : DSP Write
21:53:29 : CDMA: wParam = 13, lParam = 18
21:53:29 : Step : DSP Write
21:53:32 : CDMA: wParam = 13, lParam = 19
21:53:32 : Step : DSP Write
21:53:35 : CDMA: wParam = 13, lParam = 20
21:53:35 : Step : DSP Write
21:53:38 : CDMA: wParam = 13, lParam = 21
21:53:38 : Step : DSP Write
21:53:42 : CDMA: wParam = 13, lParam = 22
21:53:42 : Step : DSP Write
21:53:45 : CDMA: wParam = 13, lParam = 23
21:53:45 : Step : DSP Write
21:53:49 : CDMA: wParam = 13, lParam = 24
21:53:49 : Step : DSP Write
21:53:49 : CDMA: wParam = 20, lParam = 432
21:53:49 : Model Dll Msg Not Found(20, 432)
21:53:52 : CDMA: wParam = 13, lParam = 25
21:53:52 : Step : DSP Write
21:53:55 : CDMA: wParam = 13, lParam = 26
21:53:55 : Step : DSP Write
21:53:58 : CDMA: wParam = 13, lParam = 27
21:53:58 : Step : DSP Write
21:54:01 : CDMA: wParam = 13, lParam = 28
21:54:01 : Step : DSP Write
21:54:04 : CDMA: wParam = 13, lParam = 29
21:54:04 : Step : DSP Write
21:54:07 : CDMA: wParam = 13, lParam = 30
21:54:07 : Step : DSP Write
21:54:10 : CDMA: wParam = 13, lParam = 31
21:54:10 : Step : DSP Write
21:54:13 : CDMA: wParam = 13, lParam = 32
21:54:13 : Step : DSP Write
21:54:16 : CDMA: wParam = 13, lParam = 33
21:54:16 : Step : DSP Write
21:54:20 : CDMA: wParam = 13, lParam = 34
21:54:20 : Step : DSP Write
21:54:23 : CDMA: wParam = 13, lParam = 35
21:54:23 : Step : DSP Write
21:54:26 : CDMA: wParam = 13, lParam = 36
21:54:26 : Step : DSP Write
21:54:29 : CDMA: wParam = 13, lParam = 37
21:54:29 : Step : DSP Write
21:54:32 : CDMA: wParam = 13, lParam = 38
21:54:32 : Step : DSP Write
21:54:35 : CDMA: wParam = 13, lParam = 39
21:54:35 : Step : DSP Write
21:54:39 : CDMA: wParam = 13, lParam = 40
21:54:39 : Step : DSP Write
21:54:42 : CDMA: wParam = 13, lParam = 41
21:54:42 : Step : DSP Write
21:54:45 : CDMA: wParam = 13, lParam = 42
21:54:45 : Step : DSP Write
21:54:48 : CDMA: wParam = 13, lParam = 43
21:54:48 : Step : DSP Write
21:54:53 : CDMA: wParam = 13, lParam = 44
21:54:53 : Step : DSP Write
21:54:53 : CDMA: wParam = 20, lParam = 324
21:54:53 : Model Dll Msg Not Found(20, 324)
21:54:56 : CDMA: wParam = 13, lParam = 45
21:54:56 : Step : DSP Write
21:55:01 : CDMA: wParam = 13, lParam = 46
21:55:01 : Step : DSP Write
21:55:04 : CDMA: wParam = 13, lParam = 47
21:55:04 : Step : DSP Write
21:55:07 : CDMA: wParam = 13, lParam = 48
21:55:07 : Step : DSP Write
21:55:10 : CDMA: wParam = 13, lParam = 49
21:55:10 : Step : DSP Write
21:55:13 : CDMA: wParam = 13, lParam = 50
21:55:13 : Step : DSP Write
21:55:17 : CDMA: wParam = 13, lParam = 51
21:55:17 : Step : DSP Write
21:55:20 : CDMA: wParam = 13, lParam = 52
21:55:20 : Step : DSP Write
21:55:23 : CDMA: wParam = 13, lParam = 53
21:55:23 : Step : DSP Write
21:55:26 : CDMA: wParam = 13, lParam = 54
21:55:26 : Step : DSP Write
21:55:29 : CDMA: wParam = 13, lParam = 55
21:55:29 : Step : DSP Write
21:55:32 : CDMA: wParam = 13, lParam = 56
21:55:32 : Step : DSP Write
21:55:35 : CDMA: wParam = 13, lParam = 57
21:55:35 : Step : DSP Write
21:55:39 : CDMA: wParam = 13, lParam = 58
21:55:39 : Step : DSP Write
21:55:42 : CDMA: wParam = 13, lParam = 59
21:55:42 : Step : DSP Write
21:55:45 : CDMA: wParam = 13, lParam = 60
21:55:45 : Step : DSP Write
21:55:49 : CDMA: wParam = 13, lParam = 61
21:55:49 : Step : DSP Write
21:55:53 : CDMA: wParam = 13, lParam = 62
21:55:53 : Step : DSP Write
21:55:56 : CDMA: wParam = 13, lParam = 63
21:55:56 : Step : DSP Write
21:55:59 : CDMA: wParam = 13, lParam = 64
21:55:59 : Step : DSP Write
21:55:59 : CDMA: wParam = 20, lParam = 216
21:55:59 : Model Dll Msg Not Found(20, 216)
21:56:02 : CDMA: wParam = 13, lParam = 65
21:56:02 : Step : DSP Write
21:56:05 : CDMA: wParam = 13, lParam = 66
21:56:05 : Step : DSP Write
21:56:08 : CDMA: wParam = 13, lParam = 67
21:56:08 : Step : DSP Write
21:56:13 : CDMA: wParam = 13, lParam = 68
21:56:13 : Step : DSP Write
21:56:17 : CDMA: wParam = 13, lParam = 69
21:56:17 : Step : DSP Write
21:56:20 : CDMA: wParam = 13, lParam = 70
21:56:20 : Step : DSP Write
21:56:24 : CDMA: wParam = 13, lParam = 71
21:56:24 : Step : DSP Write
21:56:28 : CDMA: wParam = 13, lParam = 72
21:56:28 : Step : DSP Write
21:56:32 : CDMA: wParam = 13, lParam = 73
21:56:32 : Step : DSP Write
21:56:36 : CDMA: wParam = 13, lParam = 74
21:56:36 : Step : DSP Write
21:56:40 : CDMA: wParam = 13, lParam = 75
21:56:40 : Step : DSP Write
21:56:44 : CDMA: wParam = 13, lParam = 76
21:56:44 : Step : DSP Write
21:56:49 : CDMA: wParam = 13, lParam = 77
21:56:49 : Step : DSP Write
21:56:53 : CDMA: wParam = 13, lParam = 78
21:56:53 : Step : DSP Write
21:56:57 : CDMA: wParam = 13, lParam = 79
21:56:57 : Step : DSP Write
21:57:01 : CDMA: wParam = 13, lParam = 80
21:57:01 : Step : DSP Write
21:57:04 : CDMA: wParam = 13, lParam = 81
21:57:04 : Step : DSP Write
21:57:09 : CDMA: wParam = 13, lParam = 82
21:57:09 : Step : DSP Write
21:57:12 : CDMA: wParam = 13, lParam = 83
21:57:12 : Step : DSP Write
21:57:15 : CDMA: wParam = 13, lParam = 84
21:57:15 : Step : DSP Write
21:57:15 : CDMA: wParam = 20, lParam = 108
21:57:15 : Model Dll Msg Not Found(20, 108)
21:57:18 : CDMA: wParam = 13, lParam = 85
21:57:18 : Step : DSP Write
21:57:21 : CDMA: wParam = 13, lParam = 86
21:57:21 : Step : DSP Write
21:57:25 : CDMA: wParam = 13, lParam = 87
21:57:25 : Step : DSP Write
21:57:28 : CDMA: wParam = 13, lParam = 88
21:57:28 : Step : DSP Write
21:57:31 : CDMA: wParam = 13, lParam = 89
21:57:31 : Step : DSP Write
21:57:35 : CDMA: wParam = 13, lParam = 90
21:57:35 : Step : DSP Write
21:57:38 : CDMA: wParam = 13, lParam = 91
21:57:38 : Step : DSP Write
21:57:41 : CDMA: wParam = 13, lParam = 92
21:57:41 : Step : DSP Write
21:57:45 : CDMA: wParam = 13, lParam = 93
21:57:45 : Step : DSP Write
21:57:48 : CDMA: wParam = 13, lParam = 94
21:57:48 : Step : DSP Write
21:58:00 : CDMA: wParam = 13, lParam = 95
21:58:00 : Step : DSP Write
21:58:12 : CDMA: wParam = 13, lParam = 96
21:58:12 : Step : DSP Write
21:58:24 : CDMA: wParam = 13, lParam = 97
21:58:24 : Step : DSP Write
21:58:36 : CDMA: wParam = 13, lParam = 98
21:58:36 : Step : DSP Write
21:58:48 : CDMA: wParam = 13, lParam = 99
21:58:48 : Step : DSP Write
21:58:53 : CDMA: wParam = 2001, lParam = 1
21:58:53 : Model Dll Msg Not Found(2001, 1)
Click to expand...
Click to collapse
I've Been searching for a while now, for 3 weeks to solve my problem but I didn't find any.
Before I ask for your expertise, I did :
Before (2 years ago) I change my 2.2 froyo to 4.2.2, The Unofficial Update, CyanogenMod.
(this unofficial update has a bug, like you can't turn it on Normally, I have to use Emergency mode of my phone [to go to ClockworkMod Mode] and Select Reboot device, and then it reboots normally. [Try again if turned off])
My Battery's dead. So I stop using it for about a year. I take off my SDcard and reformat it.
Then a month ago, i bought a new battery for it.
So, I can't reboot my phone. So I Hold those 3 buttons to go to Emergency Mode (Volume down + Call + Hold/Power Off).
without a Sim and an SD card.
It only shows this "Emergency Mode!!" with a yellow background.
I searched and use this KDZ Updater.
KDZ Updater
-Has problem (Not Device Found)
< But fixed after Pressing Volumes(Down and Up) with no battery then Connect to PC via USB
Here's my First Successful KDZ Update: [V10P_00.kdz]
Code:
[R&D Test Tools Log File]
19:11:10 : Launching SW update
19:11:10 : Unpacking KDZ
19:11:12 : KDZ file extraced
19:11:17 : Files were extracted.
19:11:17 : LGMobileDL Load.
19:11:17 : Port = -1
19:11:17 : Connecting to phone
19:11:27 : Check Phone mode = 1
19:11:45 : Phone type check.......
19:11:50 : LGMobileDL.DLL Loading....
19:11:50 : _SetAuthMark Fail
19:11:50 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
19:11:50 : _SetAuthMark Fail
19:11:50 : LoadCDMAPhoneData() Error
19:11:50 : _DetachDLL Call
19:11:50 : _DetachDLL Call End
19:11:50 : Param : Path = I:\ProgramData\LGMOBILEAX\Phone\LGP350AT-00-V10p-OPEN-CN-MAR-28-2012+0_DL.dz
19:11:50 : Param : moduleDir =
19:11:50 : Param : waitTime = 0
19:11:50 : Param : UsbHighSpeed = 1
19:11:50 : Param : PhoneMode = 1
19:11:50 : Param : BinVersion = V10P_00
19:11:50 : Param : AuthMark = 0
19:11:50 : Call fn_StartUpgrade
19:12:01 : Smart : wParam = 15, lParam = 0
19:12:01 : Smart : wParam = 205, lParam = 0
19:12:02 : Smart : wParam = 205, lParam = 1
19:12:02 : Smart : wParam = 205, lParam = 2
19:12:02 : Smart : wParam = 205, lParam = 3
19:12:02 : Smart : wParam = 205, lParam = 4
19:12:02 : Smart : wParam = 205, lParam = 5
19:12:02 : Smart : wParam = 205, lParam = 6
19:12:02 : Smart : wParam = 205, lParam = 7
19:12:02 : Smart : wParam = 205, lParam = 8
19:12:02 : Smart : wParam = 205, lParam = 9
19:12:03 : Smart : wParam = 205, lParam = 10
19:12:03 : Smart : wParam = 205, lParam = 11
19:12:03 : Smart : wParam = 205, lParam = 12
19:12:03 : Smart : wParam = 205, lParam = 13
19:12:03 : Smart : wParam = 205, lParam = 14
19:12:03 : Smart : wParam = 205, lParam = 15
19:12:03 : Smart : wParam = 205, lParam = 16
19:12:03 : Smart : wParam = 205, lParam = 17
19:12:04 : Smart : wParam = 205, lParam = 18
19:12:04 : Smart : wParam = 205, lParam = 19
19:12:04 : Smart : wParam = 205, lParam = 20
19:12:04 : Smart : wParam = 205, lParam = 21
19:12:04 : Smart : wParam = 205, lParam = 22
19:12:04 : Smart : wParam = 205, lParam = 23
19:12:04 : Smart : wParam = 205, lParam = 24
19:12:04 : Smart : wParam = 205, lParam = 25
19:12:04 : Smart : wParam = 205, lParam = 26
19:12:05 : Smart : wParam = 205, lParam = 27
19:12:05 : Smart : wParam = 205, lParam = 28
19:12:05 : Smart : wParam = 205, lParam = 29
19:12:05 : Smart : wParam = 205, lParam = 30
19:12:05 : Smart : wParam = 205, lParam = 31
19:12:05 : Smart : wParam = 205, lParam = 32
19:12:05 : Smart : wParam = 205, lParam = 33
19:12:05 : Smart : wParam = 205, lParam = 34
19:12:06 : Smart : wParam = 205, lParam = 35
19:12:06 : Smart : wParam = 205, lParam = 36
19:12:06 : Smart : wParam = 205, lParam = 37
19:12:06 : Smart : wParam = 205, lParam = 38
19:12:06 : Smart : wParam = 205, lParam = 39
19:12:06 : Smart : wParam = 205, lParam = 40
19:12:06 : Smart : wParam = 205, lParam = 41
19:12:06 : Smart : wParam = 205, lParam = 42
19:12:07 : Smart : wParam = 205, lParam = 43
19:12:07 : Smart : wParam = 205, lParam = 44
19:12:07 : Smart : wParam = 205, lParam = 45
19:12:07 : Smart : wParam = 205, lParam = 46
19:12:07 : Smart : wParam = 205, lParam = 47
19:12:07 : Smart : wParam = 205, lParam = 48
19:12:07 : Smart : wParam = 205, lParam = 49
19:12:07 : Smart : wParam = 205, lParam = 50
19:12:08 : Smart : wParam = 205, lParam = 51
19:12:08 : Smart : wParam = 205, lParam = 52
19:12:08 : Smart : wParam = 205, lParam = 53
19:12:08 : Smart : wParam = 205, lParam = 54
19:12:08 : Smart : wParam = 205, lParam = 55
19:12:08 : Smart : wParam = 205, lParam = 56
19:12:08 : Smart : wParam = 205, lParam = 57
19:12:08 : Smart : wParam = 205, lParam = 58
19:12:09 : Smart : wParam = 205, lParam = 59
19:12:09 : Smart : wParam = 205, lParam = 60
19:12:09 : Smart : wParam = 205, lParam = 61
19:12:09 : Smart : wParam = 205, lParam = 62
19:12:09 : Smart : wParam = 205, lParam = 63
19:12:09 : Smart : wParam = 205, lParam = 64
19:12:09 : Smart : wParam = 205, lParam = 65
19:12:09 : Smart : wParam = 205, lParam = 66
19:12:10 : Smart : wParam = 205, lParam = 67
19:12:10 : Smart : wParam = 205, lParam = 68
19:12:10 : Smart : wParam = 205, lParam = 69
19:12:10 : Smart : wParam = 205, lParam = 70
19:12:10 : Smart : wParam = 205, lParam = 71
19:12:10 : Smart : wParam = 205, lParam = 72
19:12:10 : Smart : wParam = 205, lParam = 73
19:12:10 : Smart : wParam = 205, lParam = 74
19:12:11 : Smart : wParam = 205, lParam = 75
19:12:11 : Smart : wParam = 205, lParam = 76
19:12:11 : Smart : wParam = 205, lParam = 77
19:12:11 : Smart : wParam = 205, lParam = 78
19:12:11 : Smart : wParam = 205, lParam = 79
19:12:11 : Smart : wParam = 205, lParam = 80
19:12:11 : Smart : wParam = 205, lParam = 81
19:12:11 : Smart : wParam = 205, lParam = 82
19:12:12 : Smart : wParam = 205, lParam = 83
19:12:12 : Smart : wParam = 205, lParam = 84
19:12:12 : Smart : wParam = 205, lParam = 85
19:12:12 : Smart : wParam = 205, lParam = 86
19:12:12 : Smart : wParam = 205, lParam = 87
19:12:12 : Smart : wParam = 205, lParam = 88
19:12:12 : Smart : wParam = 205, lParam = 89
19:12:12 : Smart : wParam = 205, lParam = 90
19:12:12 : Smart : wParam = 205, lParam = 91
19:12:13 : Smart : wParam = 205, lParam = 92
19:12:13 : Smart : wParam = 205, lParam = 93
19:12:13 : Smart : wParam = 205, lParam = 94
19:12:13 : Smart : wParam = 205, lParam = 95
19:12:13 : Smart : wParam = 205, lParam = 96
19:12:13 : Smart : wParam = 205, lParam = 97
19:12:13 : Smart : wParam = 205, lParam = 98
19:12:13 : Smart : wParam = 205, lParam = 99
19:12:14 : Smart : wParam = 205, lParam = 100
19:12:14 : Smart : wParam = 300, lParam = 0
19:12:14 : Smart : wParam = 205, lParam = 0
19:12:14 : Smart : wParam = 205, lParam = 1
19:12:14 : Smart : wParam = 205, lParam = 2
19:12:14 : Smart : wParam = 16, lParam = 0
19:12:14 : Smart : wParam = 205, lParam = 0
19:12:14 : Smart : wParam = 205, lParam = 1
19:12:14 : Smart : wParam = 205, lParam = 2
19:12:14 : Smart : wParam = 205, lParam = 3
19:12:14 : Smart : wParam = 205, lParam = 4
19:12:14 : Smart : wParam = 205, lParam = 5
19:12:14 : Smart : wParam = 205, lParam = 6
19:12:14 : Smart : wParam = 205, lParam = 7
19:12:14 : Smart : wParam = 205, lParam = 8
19:12:14 : Smart : wParam = 205, lParam = 9
19:12:14 : Smart : wParam = 205, lParam = 10
19:12:14 : Smart : wParam = 205, lParam = 11
19:12:14 : Smart : wParam = 205, lParam = 12
19:12:14 : Smart : wParam = 205, lParam = 13
19:12:14 : Smart : wParam = 205, lParam = 14
19:12:14 : Smart : wParam = 205, lParam = 15
19:12:14 : Smart : wParam = 205, lParam = 16
19:12:14 : Smart : wParam = 205, lParam = 17
19:12:14 : Smart : wParam = 205, lParam = 18
19:12:14 : Smart : wParam = 205, lParam = 19
19:12:14 : Smart : wParam = 205, lParam = 20
19:12:14 : Smart : wParam = 205, lParam = 21
19:12:15 : Smart : wParam = 205, lParam = 22
19:12:15 : Smart : wParam = 205, lParam = 23
19:12:15 : Smart : wParam = 205, lParam = 24
19:12:15 : Smart : wParam = 205, lParam = 25
19:12:15 : Smart : wParam = 205, lParam = 26
19:12:15 : Smart : wParam = 205, lParam = 27
19:12:15 : Smart : wParam = 205, lParam = 28
19:12:15 : Smart : wParam = 205, lParam = 29
19:12:15 : Smart : wParam = 205, lParam = 30
19:12:15 : Smart : wParam = 205, lParam = 31
19:12:15 : Smart : wParam = 205, lParam = 32
19:12:15 : Smart : wParam = 205, lParam = 33
19:12:15 : Smart : wParam = 205, lParam = 34
19:12:15 : Smart : wParam = 205, lParam = 35
19:12:15 : Smart : wParam = 205, lParam = 36
19:12:15 : Smart : wParam = 205, lParam = 37
19:12:15 : Smart : wParam = 205, lParam = 38
19:12:15 : Smart : wParam = 205, lParam = 39
19:12:15 : Smart : wParam = 205, lParam = 40
19:12:15 : Smart : wParam = 205, lParam = 41
19:12:15 : Smart : wParam = 205, lParam = 42
19:12:15 : Smart : wParam = 205, lParam = 43
19:12:15 : Smart : wParam = 205, lParam = 44
19:12:15 : Smart : wParam = 205, lParam = 45
19:12:15 : Smart : wParam = 205, lParam = 46
19:12:15 : Smart : wParam = 205, lParam = 47
19:12:15 : Smart : wParam = 205, lParam = 48
19:12:15 : Smart : wParam = 205, lParam = 49
19:12:16 : Smart : wParam = 205, lParam = 50
19:12:16 : Smart : wParam = 205, lParam = 51
19:12:16 : Smart : wParam = 205, lParam = 52
19:12:16 : Smart : wParam = 205, lParam = 53
19:12:16 : Smart : wParam = 205, lParam = 54
19:12:16 : Smart : wParam = 205, lParam = 55
19:12:16 : Smart : wParam = 205, lParam = 56
19:12:16 : Smart : wParam = 205, lParam = 57
19:12:16 : Smart : wParam = 205, lParam = 58
19:12:16 : Smart : wParam = 205, lParam = 59
19:12:16 : Smart : wParam = 205, lParam = 60
19:12:16 : Smart : wParam = 205, lParam = 61
19:12:16 : Smart : wParam = 205, lParam = 62
19:12:16 : Smart : wParam = 205, lParam = 63
19:12:16 : Smart : wParam = 205, lParam = 64
19:12:16 : Smart : wParam = 205, lParam = 65
19:12:16 : Smart : wParam = 205, lParam = 66
19:12:16 : Smart : wParam = 205, lParam = 67
19:12:16 : Smart : wParam = 205, lParam = 68
19:12:16 : Smart : wParam = 205, lParam = 69
19:12:16 : Smart : wParam = 205, lParam = 70
19:12:16 : Smart : wParam = 205, lParam = 71
19:12:16 : Smart : wParam = 205, lParam = 72
19:12:16 : Smart : wParam = 17, lParam = 0
19:12:19 : Smart : wParam = 205, lParam = 0
19:12:20 : Smart : wParam = 205, lParam = 1
19:12:21 : Smart : wParam = 205, lParam = 2
19:12:22 : Smart : wParam = 205, lParam = 3
19:12:24 : Smart : wParam = 205, lParam = 4
19:12:25 : Smart : wParam = 205, lParam = 5
19:12:26 : Smart : wParam = 205, lParam = 6
19:12:27 : Smart : wParam = 205, lParam = 7
19:12:29 : Smart : wParam = 205, lParam = 8
19:12:30 : Smart : wParam = 205, lParam = 9
19:12:31 : Smart : wParam = 205, lParam = 10
19:12:32 : Smart : wParam = 205, lParam = 11
19:12:33 : Smart : wParam = 205, lParam = 12
19:12:34 : Smart : wParam = 205, lParam = 13
19:12:36 : Smart : wParam = 205, lParam = 14
19:12:37 : Smart : wParam = 205, lParam = 15
19:12:38 : Smart : wParam = 205, lParam = 16
19:12:39 : Smart : wParam = 205, lParam = 17
19:12:40 : Smart : wParam = 205, lParam = 18
19:12:41 : Smart : wParam = 205, lParam = 19
19:12:42 : Smart : wParam = 205, lParam = 20
19:12:44 : Smart : wParam = 205, lParam = 21
19:12:45 : Smart : wParam = 205, lParam = 22
19:12:46 : Smart : wParam = 205, lParam = 23
19:12:47 : Smart : wParam = 205, lParam = 24
19:12:49 : Smart : wParam = 205, lParam = 25
19:12:50 : Smart : wParam = 205, lParam = 26
19:12:51 : Smart : wParam = 205, lParam = 27
19:12:52 : Smart : wParam = 205, lParam = 28
19:12:53 : Smart : wParam = 205, lParam = 29
19:12:54 : Smart : wParam = 205, lParam = 30
19:12:56 : Smart : wParam = 205, lParam = 31
19:12:57 : Smart : wParam = 205, lParam = 32
19:12:58 : Smart : wParam = 205, lParam = 33
19:12:59 : Smart : wParam = 205, lParam = 34
19:13:00 : Smart : wParam = 205, lParam = 35
19:13:01 : Smart : wParam = 205, lParam = 36
19:13:03 : Smart : wParam = 205, lParam = 37
19:13:04 : Smart : wParam = 205, lParam = 38
19:13:05 : Smart : wParam = 205, lParam = 39
19:13:06 : Smart : wParam = 205, lParam = 40
19:13:07 : Smart : wParam = 205, lParam = 41
19:13:09 : Smart : wParam = 205, lParam = 42
19:13:10 : Smart : wParam = 205, lParam = 43
19:13:11 : Smart : wParam = 205, lParam = 44
19:13:12 : Smart : wParam = 205, lParam = 45
19:13:14 : Smart : wParam = 205, lParam = 46
19:13:15 : Smart : wParam = 205, lParam = 47
19:13:16 : Smart : wParam = 205, lParam = 48
19:13:17 : Smart : wParam = 205, lParam = 49
19:13:19 : Smart : wParam = 205, lParam = 50
19:13:20 : Smart : wParam = 205, lParam = 51
19:13:21 : Smart : wParam = 205, lParam = 52
19:13:22 : Smart : wParam = 205, lParam = 53
19:13:24 : Smart : wParam = 205, lParam = 54
19:13:25 : Smart : wParam = 205, lParam = 55
19:13:26 : Smart : wParam = 205, lParam = 56
19:13:27 : Smart : wParam = 205, lParam = 57
19:13:29 : Smart : wParam = 205, lParam = 58
19:13:30 : Smart : wParam = 205, lParam = 59
19:13:31 : Smart : wParam = 205, lParam = 60
19:13:32 : Smart : wParam = 205, lParam = 61
19:13:34 : Smart : wParam = 205, lParam = 62
19:13:35 : Smart : wParam = 205, lParam = 63
19:13:36 : Smart : wParam = 205, lParam = 64
19:13:37 : Smart : wParam = 205, lParam = 65
19:13:39 : Smart : wParam = 205, lParam = 66
19:13:40 : Smart : wParam = 205, lParam = 67
19:13:41 : Smart : wParam = 205, lParam = 68
19:13:42 : Smart : wParam = 205, lParam = 69
19:13:44 : Smart : wParam = 205, lParam = 70
19:13:45 : Smart : wParam = 205, lParam = 71
19:13:46 : Smart : wParam = 205, lParam = 72
19:13:47 : Smart : wParam = 205, lParam = 73
19:13:49 : Smart : wParam = 205, lParam = 74
19:13:50 : Smart : wParam = 205, lParam = 75
19:13:51 : Smart : wParam = 205, lParam = 76
19:13:52 : Smart : wParam = 205, lParam = 77
19:13:53 : Smart : wParam = 205, lParam = 78
19:13:55 : Smart : wParam = 205, lParam = 79
19:13:56 : Smart : wParam = 205, lParam = 80
19:13:57 : Smart : wParam = 205, lParam = 81
19:13:58 : Smart : wParam = 205, lParam = 82
19:13:59 : Smart : wParam = 205, lParam = 83
19:14:00 : Smart : wParam = 205, lParam = 84
19:14:01 : Smart : wParam = 205, lParam = 85
19:14:03 : Smart : wParam = 205, lParam = 86
19:14:04 : Smart : wParam = 205, lParam = 87
19:14:05 : Smart : wParam = 205, lParam = 88
19:14:06 : Smart : wParam = 205, lParam = 89
19:14:07 : Smart : wParam = 205, lParam = 90
19:14:09 : Smart : wParam = 205, lParam = 91
19:14:10 : Smart : wParam = 205, lParam = 92
19:14:11 : Smart : wParam = 205, lParam = 93
19:14:12 : Smart : wParam = 205, lParam = 94
19:14:13 : Smart : wParam = 205, lParam = 95
19:14:15 : Smart : wParam = 205, lParam = 96
19:14:16 : Smart : wParam = 205, lParam = 97
19:14:17 : Smart : wParam = 205, lParam = 98
19:14:18 : Smart : wParam = 205, lParam = 99
19:14:19 : Smart : wParam = 205, lParam = 100
19:14:22 : Smart : wParam = 11, lParam = 0
19:15:03 : Smart : wParam = 12, lParam = 0
19:15:05 : Step Complete : UPDATE FINISHED!
19:15:05 : ResetStartInfo() Call
19:15:05 : _DetachDLL Call
19:15:05 : _DetachDLL Call End
19:15:05 : FreeLibrary Call
19:15:05 : FreeLibrary Call End
19:15:05 : ResetStartInfo() Call End
19:15:05 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
19:15:05 : ===FINISHED===
I was so happy to see this "FINISHED" line [Yes! Atlas!] .
but then I restarted my phone It keeps looping on the LG Logo. And one time the "Android" Logo.
I search moar, and I finally found the Right KDZ [V10A_00.kdz] (much more downgrade from my previous update). so I tried updating it again, only to stop at an Error.
Code:
[R&D Test Tools Log File]
21:03:56 : Launching SW update
21:03:56 : Unpacking KDZ
21:03:57 : KDZ file extraced
21:03:57 : Files were extracted.
21:03:57 : LGMobileDL Load.
21:03:57 : Port = -1
21:03:57 : Connecting to phone
21:04:07 : Check Phone mode = 1
21:04:07 : Phone type check.......
21:04:07 : LGMobileDL.DLL Loading....
21:04:07 : _SetAuthMark Fail
21:04:07 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
21:04:07 : _SetAuthMark Fail
21:04:07 : LoadCDMAPhoneData() Error
21:04:07 : _DetachDLL Call
21:04:07 : _DetachDLL Call End
21:04:07 : Param : Path = I:\ProgramData\LGMOBILEAX\Phone\DZ_LGP350AT-01-V10a-515-02-MAY-24-2011+0.dz
21:04:07 : Param : moduleDir =
21:04:07 : Param : waitTime = 0
21:04:07 : Param : UsbHighSpeed = 1
21:04:07 : Param : PhoneMode = 1
21:04:07 : Param : BinVersion = V10A_00
21:04:07 : Param : AuthMark = 0
21:04:07 : Call fn_StartUpgrade
21:04:47 : Smart : wParam = 15, lParam = 0
21:04:47 : Smart : wParam = 205, lParam = 0
21:04:47 : Smart : wParam = 205, lParam = 1
21:04:47 : Smart : wParam = 205, lParam = 2
21:04:47 : Smart : wParam = 205, lParam = 3
21:04:47 : Smart : wParam = 205, lParam = 4
21:04:47 : Smart : wParam = 205, lParam = 5
21:04:47 : Smart : wParam = 205, lParam = 6
21:04:48 : Smart : wParam = 205, lParam = 7
21:04:48 : Smart : wParam = 205, lParam = 8
21:04:48 : Smart : wParam = 205, lParam = 9
21:04:48 : Smart : wParam = 205, lParam = 10
21:04:48 : Smart : wParam = 205, lParam = 11
21:04:48 : Smart : wParam = 205, lParam = 12
21:04:48 : Smart : wParam = 205, lParam = 13
21:04:48 : Smart : wParam = 205, lParam = 14
21:04:48 : Smart : wParam = 205, lParam = 15
21:04:49 : Smart : wParam = 205, lParam = 16
21:04:49 : Smart : wParam = 205, lParam = 17
21:04:49 : Smart : wParam = 205, lParam = 18
21:04:49 : Smart : wParam = 205, lParam = 19
21:04:49 : Smart : wParam = 205, lParam = 20
21:04:49 : Smart : wParam = 205, lParam = 21
21:04:49 : Smart : wParam = 205, lParam = 22
21:04:49 : Smart : wParam = 205, lParam = 23
21:04:49 : Smart : wParam = 205, lParam = 24
21:04:49 : Smart : wParam = 205, lParam = 25
21:04:50 : Smart : wParam = 205, lParam = 26
21:04:50 : Smart : wParam = 205, lParam = 27
21:04:50 : Smart : wParam = 205, lParam = 28
21:04:50 : Smart : wParam = 205, lParam = 29
21:04:50 : Smart : wParam = 205, lParam = 30
21:04:50 : Smart : wParam = 205, lParam = 31
21:04:50 : Smart : wParam = 205, lParam = 32
21:04:50 : Smart : wParam = 205, lParam = 33
21:04:51 : Smart : wParam = 205, lParam = 34
21:04:51 : Smart : wParam = 205, lParam = 35
21:04:51 : Smart : wParam = 205, lParam = 36
21:04:51 : Smart : wParam = 205, lParam = 37
21:04:51 : Smart : wParam = 205, lParam = 38
21:04:51 : Smart : wParam = 205, lParam = 39
21:04:51 : Smart : wParam = 205, lParam = 40
21:04:51 : Smart : wParam = 205, lParam = 41
21:04:51 : Smart : wParam = 205, lParam = 42
21:04:51 : Smart : wParam = 205, lParam = 43
21:04:52 : Smart : wParam = 205, lParam = 44
21:04:52 : Smart : wParam = 205, lParam = 45
21:04:52 : Smart : wParam = 205, lParam = 46
21:04:52 : Smart : wParam = 205, lParam = 47
21:04:52 : Smart : wParam = 205, lParam = 48
21:04:52 : Smart : wParam = 205, lParam = 49
21:04:52 : Smart : wParam = 205, lParam = 50
21:04:52 : Smart : wParam = 205, lParam = 51
21:04:52 : Smart : wParam = 205, lParam = 52
21:04:53 : Smart : wParam = 205, lParam = 53
21:04:53 : Smart : wParam = 205, lParam = 54
21:04:53 : Smart : wParam = 205, lParam = 55
21:04:53 : Smart : wParam = 205, lParam = 56
21:04:53 : Smart : wParam = 205, lParam = 57
21:04:53 : Smart : wParam = 205, lParam = 58
21:04:53 : Smart : wParam = 205, lParam = 59
21:04:53 : Smart : wParam = 205, lParam = 60
21:04:53 : Smart : wParam = 205, lParam = 61
21:04:54 : Smart : wParam = 205, lParam = 62
21:04:54 : Smart : wParam = 205, lParam = 63
21:04:54 : Smart : wParam = 205, lParam = 64
21:04:54 : Smart : wParam = 205, lParam = 65
21:04:54 : Smart : wParam = 205, lParam = 66
21:04:54 : Smart : wParam = 205, lParam = 67
21:04:54 : Smart : wParam = 205, lParam = 68
21:04:54 : Smart : wParam = 205, lParam = 69
21:04:54 : Smart : wParam = 205, lParam = 70
21:04:55 : Smart : wParam = 205, lParam = 71
21:04:55 : Smart : wParam = 205, lParam = 72
21:04:55 : Smart : wParam = 205, lParam = 73
21:04:55 : Smart : wParam = 205, lParam = 74
21:04:55 : Smart : wParam = 205, lParam = 75
21:04:55 : Smart : wParam = 205, lParam = 76
21:04:55 : Smart : wParam = 205, lParam = 77
21:04:55 : Smart : wParam = 205, lParam = 78
21:04:55 : Smart : wParam = 205, lParam = 79
21:04:56 : Smart : wParam = 205, lParam = 80
21:04:56 : Smart : wParam = 205, lParam = 81
21:04:56 : Smart : wParam = 205, lParam = 82
21:04:56 : Smart : wParam = 205, lParam = 83
21:04:56 : Smart : wParam = 205, lParam = 84
21:04:56 : Smart : wParam = 205, lParam = 85
21:04:56 : Smart : wParam = 205, lParam = 86
21:04:56 : Smart : wParam = 205, lParam = 87
21:04:56 : Smart : wParam = 205, lParam = 88
21:04:57 : Smart : wParam = 205, lParam = 89
21:04:57 : Smart : wParam = 205, lParam = 90
21:04:57 : Smart : wParam = 205, lParam = 91
21:04:57 : Smart : wParam = 205, lParam = 92
21:04:57 : Smart : wParam = 205, lParam = 93
21:04:57 : Smart : wParam = 205, lParam = 94
21:04:57 : Smart : wParam = 205, lParam = 95
21:04:57 : Smart : wParam = 205, lParam = 96
21:04:57 : Smart : wParam = 205, lParam = 97
21:04:57 : Smart : wParam = 205, lParam = 98
21:04:58 : Smart : wParam = 205, lParam = 99
21:04:58 : Smart : wParam = 205, lParam = 100
21:04:58 : Smart : wParam = 300, lParam = 0
21:04:58 : Smart : wParam = 205, lParam = 0
21:04:58 : Smart : wParam = 205, lParam = 1
21:04:58 : Smart : wParam = 205, lParam = 2
21:04:58 : Smart : wParam = 16, lParam = 0
21:04:58 : Smart : wParam = 205, lParam = 0
21:04:58 : Smart : wParam = 205, lParam = 1
21:04:58 : Smart : wParam = 205, lParam = 2
21:04:58 : Smart : wParam = 205, lParam = 3
21:04:58 : Smart : wParam = 205, lParam = 4
21:04:58 : Smart : wParam = 205, lParam = 5
21:04:58 : Smart : wParam = 205, lParam = 6
21:04:58 : Smart : wParam = 205, lParam = 7
21:04:58 : Smart : wParam = 205, lParam = 8
21:04:58 : Smart : wParam = 205, lParam = 9
21:04:58 : Smart : wParam = 205, lParam = 10
21:04:58 : Smart : wParam = 205, lParam = 11
21:04:58 : Smart : wParam = 205, lParam = 12
21:04:58 : Smart : wParam = 205, lParam = 13
21:04:58 : Smart : wParam = 205, lParam = 14
21:04:58 : Smart : wParam = 205, lParam = 15
21:04:58 : Smart : wParam = 205, lParam = 16
21:04:58 : Smart : wParam = 205, lParam = 17
21:04:58 : Smart : wParam = 205, lParam = 18
21:04:58 : Smart : wParam = 205, lParam = 19
21:04:59 : Smart : wParam = 205, lParam = 20
21:04:59 : Smart : wParam = 205, lParam = 21
21:04:59 : Smart : wParam = 205, lParam = 22
21:04:59 : Smart : wParam = 205, lParam = 23
21:04:59 : Smart : wParam = 205, lParam = 24
21:04:59 : Smart : wParam = 205, lParam = 25
21:04:59 : Smart : wParam = 205, lParam = 26
21:04:59 : Smart : wParam = 205, lParam = 27
21:04:59 : Smart : wParam = 205, lParam = 28
21:04:59 : Smart : wParam = 205, lParam = 29
21:04:59 : Smart : wParam = 205, lParam = 30
21:04:59 : Smart : wParam = 205, lParam = 31
21:04:59 : Smart : wParam = 205, lParam = 32
21:04:59 : Smart : wParam = 205, lParam = 33
21:04:59 : Smart : wParam = 205, lParam = 34
21:04:59 : Smart : wParam = 205, lParam = 35
21:04:59 : Smart : wParam = 205, lParam = 36
21:04:59 : Smart : wParam = 205, lParam = 37
21:04:59 : Smart : wParam = 205, lParam = 38
21:04:59 : Smart : wParam = 205, lParam = 39
21:04:59 : Smart : wParam = 205, lParam = 40
21:04:59 : Smart : wParam = 205, lParam = 41
21:04:59 : Smart : wParam = 205, lParam = 42
21:04:59 : Smart : wParam = 205, lParam = 43
21:04:59 : Smart : wParam = 205, lParam = 44
21:04:59 : Smart : wParam = 205, lParam = 45
21:04:59 : Smart : wParam = 205, lParam = 46
21:04:59 : Smart : wParam = 205, lParam = 47
21:04:59 : Smart : wParam = 205, lParam = 48
21:04:59 : Smart : wParam = 205, lParam = 49
21:04:59 : Smart : wParam = 205, lParam = 50
21:04:59 : Smart : wParam = 205, lParam = 51
21:05:00 : Smart : wParam = 205, lParam = 52
21:05:00 : Smart : wParam = 205, lParam = 53
21:05:00 : Smart : wParam = 205, lParam = 54
21:05:00 : Smart : wParam = 205, lParam = 55
21:05:00 : Smart : wParam = 205, lParam = 56
21:05:00 : Smart : wParam = 205, lParam = 57
21:05:00 : Smart : wParam = 205, lParam = 58
21:05:00 : Smart : wParam = 205, lParam = 59
21:05:00 : Smart : wParam = 205, lParam = 60
21:05:00 : Smart : wParam = 205, lParam = 61
21:05:00 : Smart : wParam = 205, lParam = 62
21:05:00 : Smart : wParam = 205, lParam = 63
21:05:00 : Smart : wParam = 205, lParam = 64
21:05:00 : Smart : wParam = 205, lParam = 65
21:05:00 : Smart : wParam = 205, lParam = 66
21:05:00 : Smart : wParam = 205, lParam = 67
21:05:00 : Smart : wParam = 205, lParam = 68
21:05:00 : Smart : wParam = 205, lParam = 69
21:05:00 : Smart : wParam = 205, lParam = 70
21:05:00 : Smart : wParam = 205, lParam = 71
21:05:00 : Smart : wParam = 205, lParam = 72
21:05:00 : Smart : wParam = 205, lParam = 73
21:05:00 : Smart : wParam = 17, lParam = 0
21:05:02 : Smart : wParam = 205, lParam = 0
21:05:04 : Smart : wParam = 205, lParam = 1
21:05:05 : Smart : wParam = 205, lParam = 2
21:05:06 : Smart : wParam = 205, lParam = 3
21:05:07 : Smart : wParam = 205, lParam = 4
21:05:08 : Smart : wParam = 205, lParam = 5
21:05:10 : Smart : wParam = 205, lParam = 6
21:05:11 : Smart : wParam = 205, lParam = 7
21:05:12 : Smart : wParam = 205, lParam = 8
21:05:13 : Smart : wParam = 205, lParam = 9
21:05:14 : Smart : wParam = 205, lParam = 10
21:05:15 : Smart : wParam = 205, lParam = 11
21:05:17 : Smart : wParam = 205, lParam = 12
21:05:18 : Smart : wParam = 205, lParam = 13
21:05:19 : Smart : wParam = 205, lParam = 14
21:05:21 : Smart : wParam = 205, lParam = 15
21:05:22 : Smart : wParam = 205, lParam = 16
21:05:23 : Smart : wParam = 205, lParam = 17
21:05:24 : Smart : wParam = 205, lParam = 18
21:05:26 : Smart : wParam = 205, lParam = 19
21:05:27 : Smart : wParam = 205, lParam = 20
21:05:28 : Smart : wParam = 205, lParam = 21
21:05:29 : Smart : wParam = 205, lParam = 22
21:05:30 : Smart : wParam = 205, lParam = 23
21:05:32 : Smart : wParam = 205, lParam = 24
21:05:33 : Smart : wParam = 205, lParam = 25
21:05:34 : Smart : wParam = 205, lParam = 26
21:05:35 : Smart : wParam = 205, lParam = 27
21:05:37 : Smart : wParam = 205, lParam = 28
21:05:38 : Smart : wParam = 205, lParam = 29
21:05:39 : Smart : wParam = 205, lParam = 30
21:05:40 : Smart : wParam = 205, lParam = 31
21:05:42 : Smart : wParam = 205, lParam = 32
21:05:43 : Smart : wParam = 205, lParam = 33
21:05:44 : Smart : wParam = 205, lParam = 34
21:05:45 : Smart : wParam = 205, lParam = 35
21:05:46 : Smart : wParam = 205, lParam = 36
21:05:48 : Smart : wParam = 205, lParam = 37
21:05:49 : Smart : wParam = 205, lParam = 38
21:05:50 : Smart : wParam = 205, lParam = 39
21:05:51 : Smart : wParam = 205, lParam = 40
21:05:53 : Smart : wParam = 205, lParam = 41
21:05:54 : Smart : wParam = 205, lParam = 42
21:05:55 : Smart : wParam = 205, lParam = 43
21:05:56 : Smart : wParam = 205, lParam = 44
21:06:06 : Smart : wParam = 100, lParam = 500
21:06:06 : Step : Upgrade Error error code = 500
21:06:06 : ResetStartInfo() Call
21:06:06 : _DetachDLL Call
21:06:06 : _DetachDLL Call End
21:06:06 : FreeLibrary Call
21:06:06 : FreeLibrary Call End
21:06:06 : ResetStartInfo() Call End
21:06:07 : ===FINISHED===
21:11:25 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
And now I'm Stuck
It only Loops at "Emergency Mode!!" with a yellow background.
Thank you guys for reading this thread. I'm sorry if I have an Error expressing my problem, English is not my *First language.