Related
Hello,
Has anyone sucessfully paired a galaxy nexus (running latest stock 4.3) with Fiat/Alfa Blue&Me (1st gen) and have it functional?
I have tried everything that went to my mind. I have upgraded the car Blue&Me to the latest version (5.6), and that allowed me to pair the phone, former versions didn't even work for pairing. However, even though it's paired, it only says "connected" for a few (2-3) seconds and I am not asked for access to the contact book. When trying to call, I get "try again later".
Thanks for your suggestions.
I tried 4.2.2 and 4.0.4, same behavior.
I tried on a N5 running 4.4, same
OK, I got it working, I will explain here the steps I took so it may help someone.
- First upgrade your car blue&me to the latest available version: http://www.blueandme.net/blueandme/index.aspx#/support/download/
Follow the instructions to the letter, never remove the memory stick until you car tells you to do it.
- Next, pull the blue&me fuse out for 10 minutes to allow windows to fully shut down (on an Alfa Mito, the fuse it F36)
- Then put the fuse back, and go into the blue&me menu, select settings and do a full factiry init of the system
- Pull the fuse again for 10 minutes to be sure windows will do a clean start
- Remove the blue&me pairings you had on your phone if any, and disable android beam
- Pair the phone like you used to do.
Blue&Me pairing issue
I am having the same issue with my OnePlus One. The BT system of my car (2009 Fiat Bravo) just won't communicate with my phone. It says "connected" forever, and doesn't get any further. My previous phone got paired easily and transferred the phone numbers, but it is not happening to my new phone. Frustrating.
Now I see you have posted some instructions. Maybe there is help for me too.
Someone can make sms reader working with an android device ? Audio and contacts works.
Inviato dal mio MI 3W utilizzando Tapatalk.
Got it!
I also had a problem connecting my OnePlus Two to my Giulietta Blue & Me, but I finally got it to work - and without pulling out fuses. Huge thanks to @renaud for his guide above.
In case it's useful, this is what I did.
- updated the Blue & Me to the latest version
- on my phone, forgot the bluetooth entry for Blue & Me
- went to settings > user data > delete all
- settings > user pairing
- on my phone, selected Blue & Me, typed in the code
- Again, as previously, the car said that it worked, and the phone said connected for a couple of seconds but then disconnected
- I then clicked on the Blue & Me entry on the phone to force it to reconnect. It connected, but then disconnected.
- I did it again, and in the few seconds that it was connected, I think I tried to select Phonebook on the car
- Anyway, some combination of repeatedly getting the phone to connect and clicking about on the car suddenly got it to stick.
A pain in the neck, but now that it's connected, it seems to work perfectly.
Good luck!
Each time I use Mi6 via bluetooth in car to answer/make calls - first call goes OK, and all others not - people I talk to don't hear me. It happena in 4 different cars so it's not car's problem. Mi5 was OK. I run 7.1.1 NMF26X global beta. miui 8 7.6.8 global beta. And can't solve it myself. Tried deleting and re-adding cars, restarted phone - nothing helped. When I switch to phone during call - it's OK. As soon as I switch back to car - same problem. No one hears me and I hear everyone.
Any1?
I'm sorry but I can't test because I don't have any Bluetooth devices.
Not using any bluetooth device either.
Hello there
I'm a new xiaomi mi6 user. I have 7.5.25 version rom installed on my phone. My phone does not see andriod wear app on my smart clock with bluetooth. Also does not share internet with hotspot. There is also a problem with the GPS, the satellites can not find it immediately. can you help me.
Thank you
ERSL said:
Hello there
I'm a new xiaomi mi6 user. I have 7.5.25 version rom installed on my phone. My phone does not see andriod wear app on my smart clock with bluetooth. Also does not share internet with hotspot. There is also a problem with the GPS, the satellites can not find it immediately. can you help me.
Thank you
Click to expand...
Click to collapse
Ok, one by one.
1. My phone does not see andriod wear app on my smart clock with bluetooth --> My watch works, did you unpair your watch with old phone first? Android wear watch can only connect to 1 phone.
2. There's personal hotspot, you can see it in the settings menu.
3. GPS needs time to find your phone, you need to have wifi (or mobile data connection to assist the phone), if it located your phone, next time GPS will work faster.
It is a different issue with me: when paired with a BT device with the "phone audio" profile enabled, despite picking up the call on via pressing the green button on the touchscreen, it still defaults to the BT device (and I have to switch audio back to "phone" before the other person cuts off after hearing nothing). This is on the global ROM 8.2.2.0...
The global ROM seems buggy as hell...
alien2k1 said:
Any1?
Click to expand...
Click to collapse
Hello Friend.
The same happens to me.
It connects to bluetooth but I have no output or audio input.
Did you get it fixed?
Thank you
Everyone.
This is not xiaomi's problem.
This problem is due to oreo's new bluetooth stack.
There is no current solution to this. I've searched far, wide and deep.
Android has a great track record in keeping the bluetooth stack broken.
If you try to search google, you will find out that not only xiaomi phones have this problem.
The only theoretical solution is to port old bluetooth blobs, and somehow make it work. But as far as i know, no one has done this before.
There is hope that android pie will fix this. But from what i read, early builds of pie still has this problem.
Hey there, I have trouble to pair Bluetooth of pixel 3 XL to my car.
Device info:
64GB pixel 3 XL black, unlock version, no root
Mazda CX-4 ver 2018, original Mazda Connect system, system ver. GW3M-41-018.1-M (this car is only available in China and no oversea edition, so I think this system is also customized.). Support Carplay but not Android auto.
Trouble description:
1. open pixel bluetooth to hold on
2. open Mazda connect bluetooth setting, ready to pair
3. pixel to choose new device, tap 'MAZDA' on screen
4. Mazda connect prompt a note with 6 digit pin and disappear less than 0.5 sec so that I cannot press screen/button to confirm
5. while pixel prompt a modal of same 6 digit pin, after tapping pair. This modal quit and prompt out 'cannot pair' info. After this note disappear, the last modal (seems like it comes first and hide in background) shows 'cannot pair due to wrong pin'
6. After double checking car manual, this device is an old ver bluetooth and its default pin have a limit of 4 digit.
So I cannot go out this bad loop after several trials.
Other phones works well like iphone 6s, huawei etc.
It's so embarrassed to use it in car. Now I use pixel to share wifi to my old ios connecting by carplay, but I still want to make the bluetooth function well and get rid of ios.
I have send feedback to Google but still no response. Is there anyway to fix it?
spike774 said:
Hey there, I have trouble to pair Bluetooth of pixel 3 XL to my car.
Device info:
64GB pixel 3 XL black, unlock version, no root
Mazda CX-4 ver 2018, original Mazda Connect system, system ver. GW3M-41-018.1-M (this car is only available in China and no oversea edition, so I think this system is also customized.). Support Carplay but not Android auto.
Trouble description:
1. open pixel bluetooth to hold on
2. open Mazda connect bluetooth setting, ready to pair
3. pixel to choose new device, tap 'MAZDA' on screen
4. Mazda connect prompt a note with 6 digit pin and disappear less than 0.5 sec so that I cannot press screen/button to confirm
5. while pixel prompt a modal of same 6 digit pin, after tapping pair. This modal quit and prompt out 'cannot pair' info. After this note disappear, the last modal (seems like it comes first and hide in background) shows 'cannot pair due to wrong pin'
6. After double checking car manual, this device is an old ver bluetooth and its default pin have a limit of 4 digit.
So I cannot go out this bad loop after several trials.
Other phones works well like iphone 6s, huawei etc.
It's so embarrassed to use it in car. Now I use pixel to share wifi to my old ios connecting by carplay, but I still want to make the bluetooth function well and get rid of ios.
I have send feedback to Google but still no response. Is there anyway to fix it?
Click to expand...
Click to collapse
whoops - sorry on first read, I didnt see yuor referrence to Android Auto - that is How I connect - sorry you are hving issues - -good luck
will keep update
Geekser said:
whoops - sorry on first read, I didnt see yuor referrence to Android Auto - that is How I connect - sorry you are hving issues - -good luck
Click to expand...
Click to collapse
Thanks for your reply. I have tried to install android auto following this video (youtube tag:
ocOvY6Q7NNo, cannot post url) with MZD-AIO-TI_Setup_2.8.1, but failed... The head unit could read usd, but not auto run the script inside.
Have tried to connect when NFC off, still not work and I will inquiry car supplier later. Also heard someone in buyer group saying he cannot pair it to his BMW too.
It is really tricky and I will keep update this issue.
spike774 said:
Thanks for your reply. I have tried to install android auto following this video (youtube tag:
ocOvY6Q7NNo, cannot post url) with MZD-AIO-TI_Setup_2.8.1, but failed... The head unit could read usd, but not auto run the script inside.
Have tried to connect when NFC off, still not work and I will inquiry car supplier later. Also heard someone in buyer group saying he cannot pair it to his BMW too.
It is really tricky and I will keep update this issue.
Click to expand...
Click to collapse
So sorry you are having issues. I have a Relatively new Kenwood Unit - I forget the model) when I first got the pixel Xl 3, initially I had problems getting it to be recognized - but once I figured out where the setitngs were for setting things up - it connected fine and now I don't have any issues - I can connect both wirelessly and via usb - wireless takes a bit longer - USB happens right away - I hope you can get things working for you....
Dear All,
I have bought this phone 1 week ago but I have problem with the bluetooth connectivity. When I would like to connect the phone to a bluetooth car device the pairing code request dialog not shows up and because of this the pairing fails. Do you have any solution for this? With Redmi Note 4 (MIUI 11.0.2.) the car works well. I tried it with other car devices but there was the same problem.
Thank you in advance!!!!:fingers-crossed:
Try going to Settings-Apps-Manage apps-Bluetooth and Clear data-Clear all data. It helped me for some time but now Bluetooth problems appear again and I have to do it every time after answering the call while listening to music via Bluetooth.
PhilMik said:
Try going to Settings-Apps-Manage apps-Bluetooth and Clear data-Clear all data. It helped me for some time but now Bluetooth problems appear again and I have to do it every time after answering the call while listening to music via Bluetooth.
Click to expand...
Click to collapse
It does not work. I think because of I use bluetooth wirstband...
Gaszi77 said:
Dear All,
I have bought this phone 1 week ago but I have problem with the bluetooth connectivity. When I would like to connect the phone to a bluetooth car device the pairing code request dialog not shows up and because of this the pairing fails. Do you have any solution for this? With Redmi Note 4 (MIUI 11.0.2.) the car works well. I tried it with other car devices but there was the same problem.
Thank you in advance!!!!:fingers-crossed:
Click to expand...
Click to collapse
Hi! try changing your AVRCP version from 1.4 to 1.6 in developer options
Thanks for reply! Unfortunately it does not work! The pairing request dialog window is still not popping up...
Gaszi77 said:
Thanks for reply! Unfortunately it does not work! The pairing request dialog window is still not popping up...
Click to expand...
Click to collapse
Maybe you need te change the bluetooth notification priority to high and maybe check permisions.allow it to show on home screen etc
Thank you for everyone! I found the problem! The app of my bluetooth watch caused the problem, after uninstalling it the bluetooth works again.
I face a similar problem with skoda car infotainment.
In my case pairing is successful but on the first call connection breaks. Even if connection is broken and car's infotainment starts seeking for a Bluetooth connection Redmi note 8 thinks it is still connected and it stucks there. when connection breaks a message pops up that reads something about AVRCP not supported and redmi note not responding
A have unpair both devices many times but same thing happens again and again.
I have to point that i came from a Redmi note 6 pro, where EVERYTHING regarding bluetooth connections and multiple connections were operated just fluently. I have redmi note 8 just 2 days
On redmi note 8 are always connected an amazfit stratos and a meizu ep51 handsfree and there are some other apps installed like mifit.
Do you thing that i should start first by unistalling all apps?
i unistalled amazfit app and it seemed that was getting better but i assume that phone it cannot deal with multiple bluetooth connections. Unforunately it cannot managed android auto (wired connection) and car infotaimnet (bluetooth connection). On the first call connection drops.
I flashed a custom ROM- based on China roms- but things didnt got better. Having both redmi not 6 pro (which handles all bluetooth connections just fine- even transfering active call via bluetooth headset to the car infotainment as soon as it establishes a bluetooth connection while i am getting into the car) and Redmi note 8 on developer options i copy all setting from Redmi note 6 pro to Redm note 8 but all issues are still there.
I wonder if it can be used the bluetooth app from the Redmi note 6 pro to the redmi note 8 but i dont have the knowledge to do it
I have the same problem. It sucks that redmi note 3 which i had before worked 100% ok...
All these issues make phone quite useless considering that everyone goes wirelessly. I wonder if this disappointing case is claimable from Xiaomi.
just noticed the same problem, both of my RN8pro bluetooth mac is 00:00:46:00:00:01 which is nonsense.
maybe you all got the same mac as mine, which is generic mac.
How can I check Bluetooth mac address ? Do I think there is something can be done?
Settings > about phone > all specs > status.
There's a bluetooth mac near the bottom.
Crescendo Xenomorph said:
Settings > about phone > all specs > status.
There's a bluetooth mac near the bottom.
Click to expand...
Click to collapse
I checked my Redmi note 8. It's seems normal, 28:16:7f:b5:65:2b is it?
MIUI 11 - Android 10 version?
The only workaround i found is to keep one connected bluetooth device at a time. So before i get into my car i have to disconnect bluetooth headphones and reconnect them after. Bluetooth management of Redmi note 8 is a big mess. I assume that is a phone's hardware problem its incapability to manage two or more bluetooth connections simultaneously.
I contacted Xiaomi customer care regarding bluetooth issues and i was finally asked to perfrom a test. I wonder how a test could resolve it
In the attached screenshot in developers options the max connected audio devices option is 2 but it's deactivated so i cannot changed it eg to 3. Could it be the solution to bluetooth connectivity issues? Is there any way to activate this option and change it?
Bluetooth not working
Hi ,
I have recently installed custom Pixel Experience Rom to my Xaiomi Note 8 device all things are working fine except teh Bluetooth. Please help
I am new to Poco. This is my second post. I have got Poco F3 5G, MIUI 12.5.1.
My car is Kia Stonic and it is approximately 3.5 years old.
By Bluetooth, I paired my Poco with my car without any problem. It even downloaded my contacts too.
But it just WILL NOT connect to my car when I turn the engine on.
So far I reset my car Bluetooth system, unpaired then re-paired on my telephone. It still will not connect to the car.
My old Moto G7 plus connects absolutely fine.
Hopefully you guys might have few suggestions.
Thank you.
ErgG said:
I am new to Poco. This is my second post. I have got Poco F3 5G, MIUI 12.5.1.
My car is Kia Stonic and it is approximately 3.5 years old.
By Bluetooth, I paired my Poco with my car without any problem. It even downloaded my contacts too.
But it just WILL NOT connect to my car when I turn the engine on.
So far I reset my car Bluetooth system, unpaired then re-paired on my telephone. It still will not connect to the car.
My old Moto G7 plus connects absolutely fine.
Hopefully you guys might have few suggestions.
Thank you.
Click to expand...
Click to collapse
have you tried searching in settings for android auto, then tinkering with those settings?
oh, i was assuming you have an android auto enabled car... do you?
Failing that, not ideal, but you could try an auto connect app...
see here
Hello reg66, before answer you, I wanted to wait until the software update of my car done.
Unfortunately it didn't help.
The only way my POCO F3 5G connects to the car by USB cable via Android Auto. I suppose it is OK to connect by cable but every short journey I make I have to use this cable....very inconvenient.
It will be connected to my car even if I take the cable out until I turn the engine off.
As you have suggested I have tinkered with the settings of Android Auto but my efforts were to no avail.
On the other hand my old phone Moto G7 plus connects to the car as soon as I turn the engine on....Via Bluetooth.
So I suppose the culprit is my new phone.....Thank you.
ErgG said:
Hello reg66, before answer you, I wanted to wait until the software update of my car done.
Unfortunately it didn't help.
The only way my POCO F3 5G connects to the car by USB cable via Android Auto. I suppose it is OK to connect by cable but every short journey I make I have to use this cable....very inconvenient.
It will be connected to my car even if I take the cable out until I turn the engine off.
As you have suggested I have tinkered with the settings of Android Auto but my efforts were to no avail.
On the other hand my old phone Moto G7 plus connects to the car as soon as I turn the engine on....Via Bluetooth.
So I suppose the culprit is my new phone.....Thank you.
Click to expand...
Click to collapse
What about using one of those auto connect apps I linked to.... So that when you're car is detected it auto connects and launches android auto...
Ohh yes, you have just reminded me....Any particular one you may like to recommend?
i have a sonata 2018 and i had the same problem when i tried to connect my tablet Huawei tab 10.1
any way i had to go inside the care screen setting and just randomly clicked something in my Bluetooth setting and it worked
in the link you will a way get inside the car setting and look for Bluetooth stuff
sorry for my bad english i hope i helped you
for just auto connect (let us know if your android auto launches successfully when connected) this one looks to have good reviews....
but i had a thought.... have you reached the maximum allowed registered devices in your Kia? Try deleting one/some of the connected devices in your Kia's bluetooth settings, that may then allow auto pairing of new devices
Quote
reg66 said:
for just auto connect (let us know if your android auto launches successfully when connected) this one looks to have good reviews....
but i had a thought.... have you reached the maximum allowed registered devices in your Kia? Try deleting one/some of the connected devices in your Kia's bluetooth settings, that may then allow auto pairing of new devices
Click to expand...
Click to collapse
Thank you Reg. I'll have a look at that link.
I had already deleted the other devices anyway.
FMMMG said:
i have a sonata 2018 and i had the same problem when i tried to connect my tablet Huawei tab 10.1
any way i had to go inside the care screen setting and just randomly clicked something in my Bluetooth setting and it worked
in the link you will a way get inside the car setting and look for Bluetooth stuff
sorry for my bad english i hope i helped you
Click to expand...
Click to collapse
Thank you for trying to help me. Unfortunately your solution did not work in my KIa Stonic.