Related
First of all, let me say this isn't my post, and I didn't develop this method. The user, "Teletype" got this all figured out and did an amazing write-up for it. I'm posting it on their behalf so it can be in this newly added forum. The link to the recovery zip is also in his original thread, which I've linked below.
Here's the link to his original thread. If you feel the urge to press "thanks", please go to his original thread and press it for him, he deserves all the credit.
teletype said:
I just managed to get TWRP running on the new Shield console, and installed SuperSU successfully. Two caveats: the display is upside down, and the USB host ports don't work. I had to plugin a mouse via an OTG cable in order to interact with it. ETA: That's only an issue when booted to TWRP. Everything's working fine in the stock ROM after rooting.
Procedure:
- enable developer tools / USB debugging
- adb push supersu.zip /sdcard
- adb reboot bootloader
- fastboot oem unlock
- fastboot boot twrp-2.8.6.0-shieldtv-unofficial.img
- unplug USB cable, connect mouse via USB, install SuperSU
TWRP boot image is attached. Off to explore...
EDIT: by request, some more detailed instructions:
On the Shield device, head to Settings -> About, and click "Build number" 7 times. This will enable Android's Developer options.
Go to Settings -> Developer options, and enable USB debugging.
Install the ADB/fastboot drivers and utilities if you don't already have them. When "adb devices" shows your Shield, you're good to go.
Download and extract recovery.zip from this thread.
Head to the SuperSU forum and download the latest version.
Open a command prompt and navigate to the directory where you downloaded everything. (Google this for your OS if you don't know how).
With the Shield still booted, run "adb push supersu.zip /sdcard" (change supersu.zip to appropriate file name). This will upload the SuperSU update zip to your device, which you'll install from TWRP.
If that worked fine, run "adb reboot bootloader". Your device should shut down, and display the Fastboot screen after a few seconds.
FOLLOW THE NEXT THREE INSTRUCTIONS AT YOUR OWN RISK. This WILL wipe all your user data, back it up with ADB first if you want to preserve it. DISCLAIMER #2: I have no idea if there are any DRM keys or anything that get wiped when this is done (this was the case on my Xperia Z3 Compact). I will say that Grid streaming still works fine after doing this.
This step will unlock your bootloader to enable booting unsigned images.
Run "fastboot devices" and make sure your Shield is visible.
Run "fastboot oem unlock" and follow the prompts on the screen. Your bootloader is now unlocked.
Now, boot the TWRP image with: "fastboot boot twrp-2.8.6.0-shieldtv-unofficial.img" - Note: I used this instead of "fastboot flash" so I could keep the stock recovery around, to grab an image of it after rooting.
You should now see a TWRP recovery menu (upside down for now).
Connect a keyboard or mouse via OTG cable, and select "Install", navigate to your SuperSU zip, select it, and follow the prompts.
Click "reboot" and you should now be rooted.
Click to expand...
Click to collapse
does this have to be done with an otg cable
You can use the supplied micro USB cable to do the adb portion. You shouldn't ever need otg with this device since it also has 2 full sized USB ports.
Sent from my nexus 9 using XDA Free mobile app
Instructions got updated
Hi,
I have updated the instructions to ones that more closely aligned with my experience of doing this. The initial instructions were good for me - but some were in slightly the wrong order or not quite clear enough to be immediately intuitive. I've tried to fix that Hope it helps.
On the Shield device, head to Settings -> About, and click "Build number" 7 times. This will enable Android's Developer options.
Exit settings, then go back in to settings -> Developer options, and enable USB debugging.
Install the ADB/fastboot drivers and utilities on to your PC if you don't already have them. When "adb devices" shows your Shield, you're good to go.
Download the latest Super user zip file from the super user thread here.
Download and extract the recovery file from here. (it needs to be a .img not a .zip)
run "adb reboot bootloader". Your device should shut down, and display the Fastboot screen after a few seconds.
FOLLOW THE NEXT THREE INSTRUCTIONS AT YOUR OWN RISK. This WILL wipe all your user data, back it up with ADB first if you want to preserve it. DISCLAIMER #2: I have no idea if there are any DRM keys or anything that get wiped when this is done.
This step will unlock your bootloader to enable booting unsigned images.
Run "fastboot devices" and make sure your Shield is listed when you do so.
Run "fastboot oem unlock" and follow the prompts on the Shield's screen. You use the power button on the shield device itself to navigate the menu, and long press to select an option. Once you have confirmed, this can take along time to unlock (hour and a half for me on the Pro version). Your bootloader is now unlocked.
"Fastboot reboot" to reboot to AndroidTV.
run "adb push supersu.zip /sdcard/" (change supersu.zip to appropriate file name that you downloaded earlier). This will upload the SuperSU update zip to your device, which you'll install from TWRP.
Now, boot the TWRP image with: "fastboot boot RECOVERYFILENAME.img" - Note: I used this instead of "fastboot flash" so I could keep the stock recovery around, to grab an image of it after rooting. (change the name of the file in the instructions to the name of your recovery file that you downloaded).
After a short while you should now see a TWRP recovery menu.
Connect a keyboard or mouse via OTG cable, and select "Install", navigate to your SuperSU zip, select it, and follow the prompts.
Click "reboot" and you should now be rooted.
Click to expand...
Click to collapse
Anyone tried kingroot?
Sean09 said:
Anyone tried kingroot?
Click to expand...
Click to collapse
We have a factory supported way to unlock and root. No real point in trying to exploit the system. If you are rooted, you should have a custom recovery anyway, which means you need to unlock the bootloader anyway in case you need to fix something.
Hey, I have rooted my shield and I didn't backup my stock recovery, anyone have a stock recovery img, I want to update to 1.4
Thanks
Gig11gs said:
Hey, I have rooted my shield and I didn't backup my stock recovery, anyone have a stock recovery img, I want to update to 1.4
Thanks
Click to expand...
Click to collapse
You can download the 1.4 firmware and flash it manually. There's a discussion on it a few pages back :good:
Will I be able to get OTA updates if I root ?
rahulkadukar said:
Will I be able to get OTA updates if I root ?
Click to expand...
Click to collapse
You'll get the OTA notification but I was not able to install the OTA. You will need to download and new firmware and flash from fastboot.
Can I still root it this way if I already updated to 1.4 as I'm still fully stock and took the OTA
Im asking the same, im on the latest as of 2015 10 19, can i root using this method ?
baileyjr said:
You'll get the OTA notification but I was not able to install the OTA. You will need to download and new firmware and flash from fastboot.
Click to expand...
Click to collapse
You're guided imagery? I read without understanding very much
Can anyone confirm this rooting method works for new firmware 2.1?
garz said:
Can anyone confirm this rooting method works for new firmware 2.1?
Click to expand...
Click to collapse
I struggled to get root with this write up, and I am not a rookie. There were a few key steps missing, for example, you actually have to flash twrp, you can't just boot from twrp as suggested, if you are on 1.4 and up. Also, you have to let the unit reboot after you do the OEM unlock before flashing twrp. I didn't and mine just froze after flashing the recovery img. I found this write up http://nvidiashieldzone.com/index.php/shield-android-tv/root-shield-android-tv/
That one in the shield zone forum was so much more complete. And yes, it worked just fine with the 2.1 update. I did it yesterday with no problems. It will wipe out your data, and it will take a long time after you do the fastboot oem unlock, especially if you have the PRO version. But root is working with no problems.
RyanInBinary said:
First of all, let me say this isn't my post, and I didn't develop this method. The user, "Teletype" got this all figured out and did an amazing write-up for it. I'm posting it on their behalf so it can be in this newly added forum. The link to the recovery zip is also in his original thread, which I've linked below.
Here's the link to his original thread. If you feel the urge to press "thanks", please go to his original thread and press it for him, he deserves all the credit.
Click to expand...
Click to collapse
Do you want to build pre-root shiled TV firmware by nvidia open source？ and have experience？
Rooting.
KingRoot dose not work on this device.
Good guide thanks.
OK i have a 16gb model on 2.1, got adb hooked up but get this when trying to push supersu.zip to sdcard0:
C:\shield>adb push supersu.zip /sdcard1
failed to copy 'supersu.zip' to '/sdcard1': Read-only file system
Any ideas?
bearkilla said:
OK i have a 16gb model on 2.1, got adb hooked up but get this when trying to push supersu.zip to sdcard0:
C:\shield>adb push supersu.zip /sdcard1
failed to copy 'supersu.zip' to '/sdcard1': Read-only file system
Any ideas?
Click to expand...
Click to collapse
Try
Adb push supersu.zip /sdcard/
Inviato dal mio SHIELD Tablet utilizzando Tapatalk
Hello to all. I have just unlocked bootloader, installed twrp and su. After everything booted up properly, I went to install an adblocker zip file, however once it booted into twrp it had no download folder, as well as when I went to reboot system it told me I had no os installed.. I'm a bit confused as to what to do now.. My apologies for clogging the thread if this has been answered before..
Edit: do I adb side load an image file or OS? I'm afraid of bricking this phone as I don't know how to continue from this point..
Which guide did you use to do all of this? I will help us understand where you started
Mrbobrowitz said:
Which guide did you use to do all of this? I will help us understand where you started
Click to expand...
Click to collapse
Hi thanks for the reply. This link right here:
http://www.androidsage.com/2016/11/...timate-guide-root-twrp-and-bootloader-unlock/
Steps I followed:
1 unlocked bootloader
2 Download the below files TWRP and Root files for Google Pixel & Pixel XL
Official TWRP for Pixel phones → Download |
Files: twrp-pixel-installer-sailfish-3.0.2-0-alpha1.zip 7.6M
twrp-3.0.2-0-alpha1-fastboot-sailfish.img 25M
Flash SuperSU 2.78 SRF4 → Download | File: SR4-SuperSU-v2.78-SR4-20161115184928.zip
Twrp install instructions:
Step 1: Download the TWRP recovery and latest SuperSU zip file for your Google Pixel and Pixel XL devices. There are 2 TWRP files with .zip and .img extensions. You will need both. You don’t need to extract the files, just place all the files on your PC as well as your Android phone’s internal storage where you can easily locate it.
Step 2: Make sure that you setup ADB and Fastboot on your PC and gone through all the prerequisites from above.
Step 3: Now plug in the Pixel device to the computer and open a command prompt or terminal on your PC to the window where TWRP.zip file is located. (See above to know how to open cmd)
Step 4: Boot your Android device into the bootloader or Fastboot mode. To do so, issue the following command through cmd or terminal. You can also manually boot into it using the hard key combination like Power+Volume Down while the device is turned off. Meanwhile, use code:
adb reboot-bootloader
Step 5: Now issue the following command in the command prompt to check your device connectivity
fastboot devices
Step 6: Now issue the following command to temporarily boot up the TWRP image.
fastboot boot path/to/twrp.img
Note: If you have installed our recommend quick 15 second ADB & fastboot installer, you do not need to insert the complete file path. Simply go to where the TWRP image file is and issue command “fastboot boot twrp.img” Otherwise, note that “path/to/” is the actual directory for the TWRP image file. Use fastboot boot and not fastboot flash and that the file you are booting is not the zip file.
Simply After that, TWRP will be accessible to you no matter which active partition slots are being used.
Step 7: After that fastboot command, you will be rebooted into a temporary TWRP recovery interface. To make it permanent, use the TWRP interface to navigate to and install the TWRP.zip file. This is just like using TWRP to flash custom ROMS and SuperSU.
Once the installation completes, you can now enjoy your new firmware. Alternatively, while, on Mac OS, you can issue “./fastboot boot path/to/twrp.img” command or on Linux type “sudo fastboot path/to/twrp.img” to flash the TWRP. For detailed tutorial and alternate methods to flash the TWRP recovery, click here.
Now it’s time to root your Google Pixel with latest SuperSU 2.78 SR4.
How to root :
Place the latest SuperSU 2.78 SR4 package onto your device’s internal storage or SDcard.
Boot your device into the custom TWRP recovery and tap install. For that, turn off your device completely and hold volume down and power buttons for a few seconds.
Once into TWRP tap the install button and select the SuperSU file.
Swipe the confirmation action below to start flashing.
Once done. reboot to system.
You can boot into the TWRP recovery by issuing the following command:
adb reboot recovery
There is an alpha 2 for twrp now. I would try installing this and seeing if it works. If not, you can simply flash the latest factory image and "start over". Granted you would lose any data that you might have had not backed up on your device, but youre not out of luck!
I wouldn't waste your time. Just flash the factory image and start all over. You managed to wipe the Rom off your device
Smallsmx3 said:
I wouldn't waste your time. Just flash the factory image and start all over. You managed to wipe the Rom off your device
Click to expand...
Click to collapse
Mrbobrowitz said:
There is an alpha 2 for twrp now. I would try installing this and seeing if it works. If not, you can simply flash the latest factory image and "start over". Granted you would lose any data that you might have had not backed up on your device, but youre not out of luck!
Click to expand...
Click to collapse
Thanks guys, I actually have installed the alpha 2 twrp. I guess my question is how do I proceed? I'm in twrp and my PC does not see the device when typing adb devices.. Within twrp it says no os installed... What do I do here?
So how do I "start over" or "flash factory image" from the state that I'm in?
mazubo said:
Thanks guys, I actually have installed the alpha 2 twrp. I guess my question is how do I proceed? I'm in twrp and my PC does not see the device when typing adb devices.. Within twrp it says no os installed... What do I do here?
So how do I "start over" or "flash factory image" from the state that I'm in?
Click to expand...
Click to collapse
You should be able to boot into fastboot
Smallsmx3 said:
You should be able to boot into fastboot
Click to expand...
Click to collapse
Ok, and if that works then flash 7.1.1? Then twrp alpha then root via SuperSU flash?
A side question here is how did I wipe the os/from off the phone? I'm stumped on that one..
mazubo said:
Ok, and if that works then flash 7.1.1? Then twrp alpha then root via SuperSU flash?
A side question here is how did I wipe the os/from off the phone? I'm stumped on that one..
Click to expand...
Click to collapse
I couldn't tell you! I've had it happen to me before a couple times. But yes if you can get into fastboot you should be able to fastboot flash a factory image. Then go and flash TWRP and root
Smallsmx3 said:
I couldn't tell you! I've had it happen to me before a couple times. But yes if you can get into fastboot you should be able to fastboot flash a factory image. Then go and flash TWRP and root
Click to expand...
Click to collapse
Ok thanks. I've been able to reboot to bootloader...
I've figured it out via fast boot. The phone is back in action, however not sure how it got wiped initially.. Thanks everyone!
mazubo said:
Ok, and if that works then flash 7.1.1? Then twrp alpha then root via SuperSU flash?
A side question here is how did I wipe the os/from off the phone? I'm stumped on that one..
Click to expand...
Click to collapse
mazubo said:
I've figured it out via fast boot. The phone is back in action, however not sure how it got wiped initially.. Thanks everyone!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Off the top of my head... Probably selected the wrong "slot" maybe?
Remember on this device there are two locations for the ROM. Slot A and B. If you select the wrong one it will show no OS.
As far as the download folder missing... I know its mute at this point, but that has to do with the FBE (File Based Encryption). Make sure TWRP asks you for your Pattern Password. If you do not have one I would consider setting one. That way you know for fact that the File system will get decrypted properly. Also reports say you may have to reboot TWRP twice to get it to decrypt as well.
Introduction
I'm writing this thread to summarize useful information about the BQ Aquaris X2 pro such as:
preliminary actions (adb and fastboot configuration)
unlocking the bootloader
flash a factory image
root the device (currently without TWRP)
updating the device without losing root
relocking the bootloader
I own this phone since July 2018. I started writing my notes in August 2018 in the form of a Google document (link here). I shared this document with some telegram groups and some people I know.
Now I that I think it can be more useful to summarize all my notes here on XDA so that all interested people can access it.
DISCLAIMER:
By attempting any of the processes listed in this thread you accept full responsibility for your actions. I have no responsibility about your actions.
1) Preliminary actions
1.1) Developer options, USB debugging and Unlock OEM
The first thing you need to do is to enable Developer options, USB debugging and Unlock OEM. Hence:
enable “Developer options” by hitting 7 times on the build number (Got to settings --> about phone)
enter the new menu “Developer options” and,
enable “USB debugging”
enable “Unlock OEM”
1.2) Download and configure abd and fastboot
All steps listed in this guide will require the use of Google Platform tools. I suggest the use of the one provided by Google here: https://developer.android.com/studio/releases/platform-tools.
Download the one for your operating system:
View attachment 4655394
Be sure that your terminal can access adb and fastboot from every position by configuring the PATH. I'm use to configure the PATH on the fly when I need it. As I said before, I work on Linux/macOS where you can set the PATH by:
opening a terminal and running:
Code:
export PATH=$PATH:path_to_platform_tools
2) Unlock the bootloader
Unlocking the booloader will wipe your phone. So backup your data first.
The good news here is that this phone can be handled like a Nexus/Pixel phone. Therefore, the procedure to unlock the bootloader is straightforward:
do all stuff at point 1.1 and 1.2
open a terminal
plug your phone to the PC
reboot into the bootloader
Code:
adb reboot bootloader
run the code:
Code:
fastboot flashing unlock
now you have to wait until your phone reboots. It takes a while, don't panic!!! When the phone is on the initial screen turn it off and reboot into the bottloader again by holing 'power + volume down'.
run the code:
Code:
fastboot flashing unlock_critical
it's done. Your bootloader is completely unlocked. Now, you only have to wait again for the reboot.
3) Flash a factory image
As you probably know, BQ releases a factory image at each update at this link factory images. Factory images are very useful to perform a very clean install. Are you experiencing some issues with your phone and none of the trick you tried solved it? If it is a software issue a clean flash with a factory image will likely remove the issue.
Keep in mind that by flashing a factory image you will wipe also the userdata partition. So backup your data first. Now let's see how to flash the factory image:
you need an unlocked bootloader (see previous sections)
download the factory image from this link
unzip the archive
open a terminal at this folder
be sure to have abd and fastboot properly configured (see previous sections)
run the script to flash all (*):
Code:
./sdm660_fastboot_all_images.sh
wait the end of the process. The phone will reboot.
(*) on Windows you have to deal with the file sdm660_fastboot_all_images.bat. I suppose it's similar but I've never done it on Windows.
4) Obtain ROOT privileges
Nowadays, the most common tool to obtain root privileges is Magisk. Many people here know very well what Magisk is and how to install it with TWRP. However, TWRP is not yet ready for BQ Aquaris X2 pro, hence, we must follow the procedure for installing it without the custom recovery.
When I wrote the document in August I find very informative this guide by @nathanchance. It's for the pixel 2XL but, as I told you before, it works perfectly also for the BQ Aquaris X2 pro (zangyapro). So here I summarize what @nathanchance already posted. All credits must go to him.
Here you have the steps:
Download the Magisk zip from the official thread and install the manager from the zip.
Grab a boot image to patch (either the one from the latest factory image or a custom kernel one) and push it to your device:
Code:
adb push <path_to_file> /sdcard/Download
Open Magisk Manager and click the Install button.
Click "Install" at the first prompt then choose "Patch Boot Image File". A file manager will pop up.
Select the boot image you want to patch and let Magisk Manager patch it.
Pull it off your device:
Code:
adb pull /sdcard/MagiskManager/patched_boot.img
Reboot into the bootloader:
Code:
adb reboot bootloader
Flash the boot image and reboot.
Code:
fastboot flash boot patched_boot.img
fastboot reboot
Open Magisk Manager and you should be rooted!
Please note that it exists also a specific thread where the author also provides the patched boot.img files for download. Hence, you can start from point 6 without patching the boot.img by yourself. Take care of selecting the right one. Here you have the thread link.
5) Update the ROM without loosing root
To the best of my knowledge, the only way to update keeping root is by using the factory images provided by BQ.
Download the factory image of the latest firmware (link)
Extract the file zip and upload the file boot.img on your phone
Code:
adb push <path_to_file> /sdcard/Download
Open Magisk Manager and click the Install button.
Click "Install" at the first prompt and then choose "Patch Boot Image File". A file manager will pop up.
Select the boot image you want to patch and let Magisk Manager patch it.
Pull it off your device:
Code:
adb pull /sdcard/MagiskManager/patched_boot.img
Place the file patched_boot.img in the folder of the BQ firmware unzipped at point 2
Make a copy of the file sdm660_fastboot_all_images (.sh in Mac/Liux and .bat on Windows).
Rename the file, I called it sdm660_fastboot_upgrade.sh
Change the following lines (this will preserve root privileges on your phone):
Code:
fastboot flash boot_a boot.img # <-- delete this line
fastboot flash boot_a patched_boot.img # <-- add this line
Delete the following line (this will prevent your data to be wiped):
Code:
fastboot flash userdata userdata.img # <-- delete this line
Run from your terminal
Code:
./sdm660_fastboot_upgrade.sh (or bat)
I think that one can also update using the OTA. This will make you lose the root privileges and therefore, you will have to repeat the procedure at section 4. I've never tested this so, if you decide to do it, you are on your own.
6) Relock the Bootloader
By relocking the bootloader you will lose all your data, hence, backup them first.
To relock the bootloader you only need the following commands:
Code:
fastboot flashing lock_critical
fastboot flashing lock
Each command will wipe your data and will reboot the phone. Be patient waiting for the reboot and do not panic.
Reserved.
(work in progress)
First: Thanks for this really nice and comprehensive thread!
I have an important addition to point:
3. Open Magisk Manager and click the Install button.
Click to expand...
Click to collapse
Install Button will only appear if the phone has internet connection (Wifi or Mobile Data)
with this I can patch the boot image successfully
But unfortunately I can not run the "sdm660_fastboot_upgrade.sh.bat" it does not recognize my device.
When checking the commands in the batch I found that my device is acting really strange, sometimes giving different errors for the same command like:
Code:
C:\Android\X2proRoot\1.7.1_WithRoot>fastboot set_active _a
error: Device does not support slots.
C:\Android\X2proRoot\1.7.1_WithRoot>fastboot set_active _a
Setting current slot to 'a'...
FAILED (remote: Invalid Slot)
finished. total time: 0.004s
C:\Android\X2proRoot\1.7.1_WithRoot>fastboot set_active _a
error: Device does not support slots.
also strange:
Code:
C:\Android\X2proRoot\1.7.1_WithRoot>fastboot flash boot patched_boot.img
target didn't report max-download-size
sending 'boot' (50749 KB)...
FAILED (remote: Requested download size is more than max allowed
)
finished. total time: 0.004s
Probably some windows crap not working or an incompatibility of the installed platform tools / drivers and the ones from BQ...
raudidroid said:
First: Thanks for this really nice and comprehensive thread!
I have an important addition to point:
Install Button will only appear if the phone has internet connection (Wifi or Mobile Data)
Click to expand...
Click to collapse
Thanks. I was not aware of this. And now I can't check this on my device because I started using GPay and I prefer to stay with no root and locked bootloader.
Maybe I will play again with the bootloader when TWRP for this device will be released. If it will
got it running!
raudidroid said:
Probably some windows crap not working or an incompatibility of the installed platform tools / drivers and the ones from BQ...
Click to expand...
Click to collapse
Probably it was just that. I Installed Ubuntu 16.04 LTS in a Vmware machine and followed the tutorial (important note here: do everything in a Terminal running under root).
Short moments of panic due to boot-loop included (I flashed a defective boot image [vmware drag and drop files obviously did not copy the whole file] )
for everybody who ends in a bootloop: just keep calm, switch off phone (>10s press power button) an very quickly when it is of press power and volume down to get into flashmode again (I had to try several times)
Hey @raudidroid, when I answered to you the first time I did not read all the message or you edited it later. Only now I'm reading the issues you faced.
On Windows, what shell did you use? PowerShell?
I'm not sure about this because I banned Windows from my personal and working life several years ago, however, recently I read some posts of people having issues with PowerShell. If this is also your case next time try to use classic cmd.
Probably it was just that. I Installed Ubuntu 16.04 LTS in a Vmware machine and followed the tutorial (important note here: do everything in a Terminal running under root).
Click to expand...
Click to collapse
Regarding this the above quote, I'm quite sure that you do not need to be super user to apply any of the procedure listed in the guide.
for everybody who ends in a bootloop: just keep calm, switch off phone (>10s press power button) an very quickly when it is of press power and volume down to get into flashmode again (I had to try several times)
Click to expand...
Click to collapse
Since your are suggesting "... very quickly when it is of press power and volume down ... " I can imagine that you did this procedure while your phone was connected to the laptop/PC with the USB cable. In this condition, when you force the shutdown by pressing power for 10s, the phone reboots automatically. So my suggestion is to unplug it first, in this way the phone turn off without rebooting and you can comfortably enter in the bootloader with no hurry.
luk.giak said:
On Windows, what shell did you use? PowerShell?
I'm not sure about this because I banned Windows from my personal and working life several years ago, however, recently I read some posts of people having issues with PowerShell. If this is also your case next time try to use classic cmd.
Click to expand...
Click to collapse
I was using CMD / Command Prompt on win10, but maybe I have to many ADBs/Drivers/... installed. got a really weird behavior...
Regarding this the above quote, I'm quite sure that you do not need to be super user to apply any of the procedure listed in the guide.
Click to expand...
Click to collapse
without root it wouldn't work, i got "no permissions (user in plugdev group; are your udev rules wrong?)"
with root everything ran smoothly
Since your are suggesting "... very quickly when it is of press power and volume down ... " I can imagine that you did this procedure while your phone was connected to the laptop/PC with the USB cable. In this condition, when you force the shutdown by pressing power for 10s, the phone reboots automatically. So my suggestion is to unplug it first, in this way the phone turn off without rebooting and you can comfortably enter in the bootloader with no hurry.
Click to expand...
Click to collapse
Oh! Yep, that sounds like it would have been the better way to do it
Thanks for your post and your answers.
BTW: half-OT do you know any way to get netflix running after the rooting?
For your information.
I follow part 5 and updated my firmware to version 1.7.3 successfully. Thanks for this guide.
AndroidenKalle said:
For your information.
I follow part 5 and updated my firmware to version 1.7.3 successfully. Thanks for this guide.
Click to expand...
Click to collapse
Your welcome!
For your information.
I follow part 5 and updated my firmware to version 2.0.0 (Android Pie 9) successfully.
AndroidenKalle said:
For your information.
I follow part 5 and updated my firmware to version 2.0.0 (Android Pie 9) successfully.
Click to expand...
Click to collapse
Thanks for sharing.
I'm on PIE as well. Today I flashed the factory image to make a clean install.
Hello, maybe someone can be of help to my situation.
I had my phone rooted in the last firmware version (1.7.3), and I was getting notifications to update to Android 9 pie for some time, however I was waiting to have some time to spare and first backup my files and do a factory update to pie and then root.
However, last nigh without warning my phone just rebooted and updated to pie, (firmware ver 2.0.2) and I lost root obviously. However, all my files, apps, etc were intact.
So today I decided to root my phone again. I download the firmware zip from BQ's site and then used Magisk (ver. 19.2) to patch the boot.img.
I rebooted to fastboot and did "sudo fastboot flash magisk_patched.img", and rebooted but the phone got stuck in the logo screen.
Then I used method 5 of this tutorial and ran ./sdm660_fastboot_upgrade.sh (with the mentioned modifications), however it bootlooped again. Then I flashed the original boot img and my phone booted just fine again, I tried to patch the img again, did again step 4 and it bootlooped again.
Any clues on how to successfully root ? Never had any problems updating and rooting from firmware 1.4.0 to 1.7.3.
Thank you for your time
Hello, I'm trying to root an Android 10 Alldocube tablet iPlay30.
I'm using this guide: https://www.getdroidtips.com/root-alldocube-iplay-30-magisk/
And so trying to unlock the booloader (using Win10) using ABD and Fastboot.
In the command prompt I write: "adb devices"
and win10 recognises the tablet. ok
I write: "adb reboot bootloader"
and ok the tablet reboots in FASBOOT mode
But then if in the command prompt I write: "fastboot devices"
The cursor wraps and nothing happens
If I write: "fastboot flashing unlock"
It appears the writing "<waiting for any device>" and nothing happens
Any help? Thank you!
Don't you try this link to configure the USB in FASBOOT mode, good luck. https://android.stackexchange.com/questions/46142/fastboot-doesnt-see-device/87392#:~:text=Reboot device into fastboot mode,unrecognized device in the list
KimLe said:
Don't you try this link to configure the USB in FASBOOT mode, good luck. https://android.stackexchange.com/questions/46142/fastboot-doesnt-see-device/87392#:~:text=Reboot device into fastboot mode,unrecognized device in the list
Click to expand...
Click to collapse
Thank you! I succeeded in unlocking the bootloader. Unfortunately when I put the patched (from Magisk) boot.img in the Rom file on the PC, and select the scatter.txt, Flash Tool says there is a checksum issue.
Any suggestion please? Thank you!
Can you tried this link from UMIDIGI. It is used ADB and FastBoot commands to install patched (from Magisk) boot.img for Android 10:
https://community.umidigi.com/forum.php?mod=viewthread&tid=19114&extra=page%3D1
KimLe said:
Can you tried this link from UMIDIGI. It is used ADB and FastBoot commands to install patched (from Magisk) boot.img for Android 10:
https://community.umidigi.com/forum.php?mod=viewthread&tid=19114&extra=page%3D1
Click to expand...
Click to collapse
Thank you.
Unfortunately it doesn't work
I suppose there is a problem with Magisk.
The last Magisk apk seems to generate correctly a file starting from the original boot.img and it calls it "magisk_patched_1HqYW.img"
So if I put it in the original ROM folder and then flash the boot with SP Flash Tool, it seems to go all ok, but the tablet isn't rooted.
If I use to flash it with ADB, it flashes the magisk file correctly ... but then the tablet is bricked. It doesn't boot and goes on and off in loop with the first image only.
Fortunately, flashing the complete original ROM with SP Flash Tool, it returns ok to factory status....
The bootloader is still unlocked but no way to root the device. I suppose, I repeat, for a wrong img file from Magisk.
Any solution? Magisk is the last version. So Magisk Manager 8.0.4
I see it's very different from the other past versions (from tutorial I can find around, I mean)
If someone knows also of other Alldocube tablets rooted recently, it could be good.
The iPlay 20 for example (with windows, not linux)
Thank you!
Albertohf said:
Thank you.
Unfortunately it doesn't work
I suppose there is a problem with Magisk.
The last Magisk apk seems to generate correctly a file starting from the original boot.img and it calls it "magisk_patched_1HqYW.img"
So if I put it in the original ROM folder and then flash the boot with SP Flash Tool, it seems to go all ok, but the tablet isn't rooted.
If I use to flash it with ADB, it flashes the magisk file correctly ... but then the tablet is bricked. It doesn't boot and goes on and off in loop with the first image only.
Fortunately, flashing the complete original ROM with SP Flash Tool, it returns ok to factory status....
The bootloader is still unlocked but no way to root the device. I suppose, I repeat, for a wrong img file from Magisk.
Any solution? Magisk is the last version. So Magisk Manager 8.0.4
I see it's very different from the other past versions (from tutorial I can find around, I mean)
If someone knows also of other Alldocube tablets rooted recently, it could be good.
The iPlay 20 for example (with windows, not linux)
Thank you!
Click to expand...
Click to collapse
Cause the Android 10 firmware, it is verified all module flash to it, so if you use SP Flash Tool the stock boot.img will replace your patched-boot.img upon reboot. So it need to flash the module files by ADB/Fastboot to disable-verity when it has been flashed. Those commands work well when I use them to root my Umidigi A9 pro Android 10.
KimLe said:
Cause the Android 10 firmware, it is verified all module flash to it, so if you use SP Flash Tool the stock boot.img will replace your patched-boot.img upon reboot. So it need to flash the module files by ADB/Fastboot to disable-verity when it has been flashed. Those commands work well when I use them to root my Umidigi A9 pro Android 10.
Click to expand...
Click to collapse
You are GREAT! It was my fault! I did not followed the instructions properly! iPlay30 rooted!
albyhf said:
You are GREAT! It was my fault! I did not followed the instructions properly! iPlay30 rooted!
Click to expand...
Click to collapse
Glad your iPlay30 Rooted.
albyhf said:
You are GREAT! It was my fault! I did not followed the instructions properly! iPlay30 rooted!
Click to expand...
Click to collapse
What instructions did you used?
In this guide, ill be showing you how to root your device using Magisk. This is done at your own risk, i am not responsible for corrupted images, bricked devices etc.
*NOTE: This guide is for the OnePlus 7T Pro only*
What you will need:
A windows PC - idk buy one lol?
Platform tools SDK - https://developer.android.com/studio/releases/platform-tools
USB cable that came with the phone
Magisk Manager APK - https://magiskapp.com/apk/
Your phones current software boot.img! You can either get this from the vendors website, or if you are running a custom OS, you should already have the file.
*Ill be assuming you are familiar with cmd, fastboot commands, and that your bootloader is already unlocked, and you are running a custom recovery! For a guide on how to do the last two things, part of my last guide can help you - https://forum.xda-developers.com/t/how-to-install-android-12-derpfest-for-noobs.4385171/ *
Step 1: Download the magisk apk from the website and install it to your device. After this, copy over the boot.img file that is from your current rom into the downloads folder of your phone! Now, open up magisk manager, and press install beside the 'Magisk' Section on the home screen. Then press 'Select and Patch a FIle'. Now you can select the boot.img file and let Magisk do its thing.
Step 2: Once that process has been completed, you should have a file beginning with 'magisk_patched....img' in your downloads folder. Copy that file over to the platform tools folder in your computer. Now boot your phone into fastboot mode and connect it to your computer. Then on your computer, go to where you placed the magisk_patched file and in the search bar in file explorer type cmd. This should open a cmd window. Then type 'fastboot reboot fastboot' in order to enter your phone into fastbootd mode.
Step 3: Type 'fastboot flash boot 'PATH TO MAGISK_PATCHED FILE'
Let this run and once its done, reboot your phone.
Go to Magisk and Voila you should be rooted!
If you have any questions please dont hesitate to ask!
If i have made any mistakes in this guide, or you guys think i should make any changes, let me know, im new to this!
Thnx for the post , and confirming that this worked perfectly with OP7T PRO Android 11 official ROM
Do I assume correctly that I would wipe everything?
astroarchcraft said:
In this guide, ill be showing you how to root your device using Magisk. This is done at your own risk, i am not responsible for corrupted images, bricked devices etc.
*NOTE: This guide is for the OnePlus 7T Pro only*
What you will need:
A windows PC - idk buy one lol?
Platform tools SDK - https://developer.android.com/studio/releases/platform-tools
USB cable that came with the phone
Magisk Manager APK - https://magiskapp.com/apk/
Your phones current software boot.img! You can either get this from the vendors website, or if you are running a custom OS, you should already have the file.
*Ill be assuming you are familiar with cmd, fastboot commands, and that your bootloader is already unlocked, and you are running a custom recovery! For a guide on how to do the last two things, part of my last guide can help you - https://forum.xda-developers.com/t/how-to-install-android-12-derpfest-for-noobs.4385171/ *
Step 1: Download the magisk apk from the website and install it to your device. After this, copy over the boot.img file that is from your current rom into the downloads folder of your phone! Now, open up magisk manager, and press install beside the 'Magisk' Section on the home screen. Then press 'Select and Patch a FIle'. Now you can select the boot.img file and let Magisk do its thing.
Step 2: Once that process has been completed, you should have a file beginning with 'magisk_patched....img' in your downloads folder. Copy that file over to the platform tools folder in your computer. Now boot your phone into fastboot mode and connect it to your computer. Then on your computer, go to where you placed the magisk_patched file and in the search bar in file explorer type cmd. This should open a cmd window. Then type 'fastboot reboot fastboot' in order to enter your phone into fastbootd mode.
Step 3: Type 'fastboot flash boot 'PATH TO MAGISK_PATCHED FILE'
Let this run and once its done, reboot your phone.
Go to Magisk and Voila you should be rooted!
If you have any questions please dont hesitate to ask!
If i have made any mistakes in this guide, or you guys think i should make any changes, let me know, im new to this!
Click to expand...
Click to collapse
Hello, up to step 3 everything was fine. I let it run its thing, and reboot, BUT it became stuck in fastboot, forever. What can I do? I tried to wipe data and everything, but it's still stuck. Is there anything I can do?
Okay, so I manage to get my phone unbricked and is now running TWRP, which it was not before doing this. Am I correct to assume that doing all this without TWRP breaks the phone?
powerfulnacho said:
roidHello, up to step 3 everything was fine. I let it run its thing, and reboot, BUT it became stuck in fastboot, forever. What can I do? I tried to wipe data and everything, but it's still stuck. Is there anything I can do?
Okay, so I manage to get my phone unbricked and is now running TWRP, which it was not before doing this. Am I correct to assume that doing all this without TWRP breaks the phone?
Click to expand...
Click to collapse
Same here, not work too.
For OxygenOS latest, in Android 12.
--- EDIT ---
Personally I install TWRP to do mostly backups, if needed.
But you have to use this twrp for Android 12 :
OnePlus 7T Android 12 TWRP?
Hello! I'm very new to building custom recoveries, and haven't even completed a successful build yet. I have a OnePlus 7T model HD1905 (aka North American model/Global) running OOS 12. I've tried to find guides on how to make a TWRP recovery, but...
forum.xda-developers.com
For the moment, after flash boot.img builded by Magisk is not work. But i dont try with this twrp. I dont now if this have a link...