I've had a problem, whenever I connect a wireless controller to my s22, it eats inputs when I press the same button over and over. For example, if I mash the A button, only some of the inputs register and if I mash it as fast as I can, it doesn't register at all making games where I have to press the same button in succession almost unplayable. There also tends to be input lag.
I've tried with to Xbox controllers and an 8bitdo SN30 Pro+ and it happened to all three.
Is there a way to fix this????
I just got a samsung s22 ultra and haven't attempted to connect a gaming controller to it yet, but was curious about the issue you are having. Since I have thought about getting a half keyboard and mouse to hook up to it and play games as well..
A bit of digging and looking and I found this article that explains what issue you might be having and a possible fix for it too.
[Update: Fixed in Android 12] Many Android 11 users are having trouble getting games to recognize their controllers
Some smartphones running Android 11 are unable to connect to gaming controllers due to a bug. This issue has been fixed in Android 12.
www.xda-developers.com
Related
Saw some threads about this in the A500 section, but anyone try this (or other) controller with the A100?
I'd love to see a list of games/apps that work with it.
I'm sure it works great with the emulators
I thought I had found the pairing/installation guide online, but now I can't find it again. So I posted the product description from GameStop's site below.
Gamestop's retail stores don't even know they are selling this online, but it's been available at least since last christmas season.
They are even planning to sell their own branded tablet for gaming.
Here's the details from their site...
===
The Wireless Tablet Game Controller is an incredible accessory only available at GameStop. Consumers can use it with their tablet and an HDMI cable (Micro to standard HDMI- sold at GameStop) to view their tablet games on their HDTV and play form their couch with the wireless controller (up to 30 feet away!). Definitely a new way to game!!
• Simple set up
• Bluetooth wireless technology
• Rechargeable unit with built in batteries and charging cable included
• Mapped control options let you assign buttons to the game actions you want
• Designed to work with select Android tablets
===
Works with Version 1.3 and above of GTA III, I know because I am running it on my A100. As for other games, I am not so sure.
I bought mine when i bought my a100 from gamestop before christmas.
I have used the controller with MAME4droid, Riptide GP, SpeedXGalagus and Cordy.
Riptide GP and Cordy came pre-installed by gamestop, don't know if that makes a difference or not.
controller has at least a 20 foot range as well, it works fine from across the living room with the a100 connected to the TV via hdmi cable. (SpeedXGalagus doesn't work with tv because of orientation).
only problem i have had is that the OS sees the controller as a keyboard, so some non games will refuse to show the onscreen keyboard if the controller is connected/bound.
tsenecal said:
only problem i have had is that the OS sees the controller as a keyboard, so some non games will refuse to show the onscreen keyboard if the controller is connected/bound.
Click to expand...
Click to collapse
Interesting, What apps? not ran into that issue myself
tsenecal said:
only problem i have had is that the OS sees the controller as a keyboard, so some non games will refuse to show the onscreen keyboard if the controller is connected/bound.
Click to expand...
Click to collapse
You can get the keyboard to start poping up like normal. Same thing happens for me with bluetooth mouse. Just click the little keyboard icon down in the bar by the clock and select the keyboard you want to use, and toggle the little slider switch at the top of the menu. Then your keyboard will pop up like normal. You have to do it each time, but at least you get funtionality that way.
Hi, I've got a V500 which I installed infecteds cm11 build, I've since bought an OTG cable and tried to plug in my 360 controller, but I'm having some issues, I downloaded a gamepad testing app and it seems like the button presses are registering, but it's not registering the releases. Is anyone else having this issue or could it just be my cable/controller/tablet?
I just tried with a brand new wireless 360 controller with the adapter and with that controller only the right bumper sticks. This seems like a really strange issue. Is there anyway I can find out what's causing it?
Hi chris
Nice to see I'm not alone with this issue as well.
As far as I've tested, whenever we press the A,B,X,Y,R1,L1 buttons they don't register the releases.
I've tried many different things, such as changing the keyboard layout for the controllers, and even making my own. Not successful though.
Well, I've managed to "bypass" this problem by configuring the gamepad keys on the games (the ones that we can configure, of course) to don't use these buttons I listed.
I changed the A,B,X,Y to the right analog stick, and the R1,L1 buttons to the R2,L2 Triggers (which are analogic).
Then the controller may work flawlessly.
Nice to know I'm not the only one to experience this issue. Weirdly I can use my 360 controller to navigate around the android interface, but struggle to get it to do anything when it comes to using it in game.
has anyone managed to get this to work?
I've tried the same cable with the same pad on my nexus 5 and it works perfectly, so there is something wrong with the USB driver.
All I want to do is play ps1 games on my tablet.
Have a firetv rooted running latest 51.1.1.0 FW, managed to get two PS4 dualshock 4s paired via bluetooth, put the fixed up kl file in /sys/usr/keyboard (or whatever path it is) and 1 controller seems to be fine, but when I pair 2 controllers, the general firetv menus act up when using either control - sometimes the input doesn't register, and sometimes the dpad registers 6+ clicks. After awhile still, the input seems to just freeze up spontaneously or the firetv becomes non-responsive, not sure which. This affects all inputs including the remote. Afaik, one controller (and remote) paired doesn't seem to exhibit the problematic behavior.
Not sure if it's because of the updated firmware as I've seen others mention input lag, but I don't think it goes away - it seems to get worse. Strange still is that if i boot up retroarch immediately and pair both controllers then in-game action seems to be fine (all input seems to register) except there is a pretty bad lag - maybe up to 500-750ms?
Any ideas on what could be causing this? Not sure how far I should try to troubleshoot without screwing up the firetv by installing settings.apk from titanium backup to try to see if there's anything in there that might help. I assume that since the DS4s are basically seen as a firetv controller, that this issue should also affect them as well? I don't have any firetv controllers to try. In the end, it would be great to get 4 of these puppies paired but at the issue rate I'm seeing, I don't think dropping another $120 would be wise until this is identified.
crook80 said:
Have a firetv rooted running latest 51.1.1.0 FW, managed to get two PS4 dualshock 4s paired via bluetooth, put the fixed up kl file in /sys/usr/keyboard (or whatever path it is) and 1 controller seems to be fine, but when I pair 2 controllers, the general firetv menus act up when using either control - sometimes the input doesn't register, and sometimes the dpad registers 6+ clicks. After awhile still, the input seems to just freeze up spontaneously or the firetv becomes non-responsive, not sure which. This affects all inputs including the remote. Afaik, one controller (and remote) paired doesn't seem to exhibit the problematic behavior.
Not sure if it's because of the updated firmware as I've seen others mention input lag, but I don't think it goes away - it seems to get worse. Strange still is that if i boot up retroarch immediately and pair both controllers then in-game action seems to be fine (all input seems to register) except there is a pretty bad lag - maybe up to 500-750ms?
Any ideas on what could be causing this? Not sure how far I should try to troubleshoot without screwing up the firetv by installing settings.apk from titanium backup to try to see if there's anything in there that might help. I assume that since the DS4s are basically seen as a firetv controller, that this issue should also affect them as well? I don't have any firetv controllers to try. In the end, it would be great to get 4 of these puppies paired but at the issue rate I'm seeing, I don't think dropping another $120 would be wise until this is identified.
Click to expand...
Click to collapse
I've been experiencing the unresponsive issue as well and have been trying to pin point the issue myself. Im able to pair 2 controllers no problem and the issue of slow down normally happens when i exit from an emulator or game app.
When the slowdown does occur I just turn the DS4 controllers off and after about 10 seconds all is fine again.
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
SePudrioLaMomia said:
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
Click to expand...
Click to collapse
Yes and no. Ds4 works perfectly outside of shark space (the gaming mode) with zero issues.
With sharkspace enabled the ds4 looses connection and fails to reconnect untill sharkspace has been disabled/quit.
We can load sixaxis controller app from inside sharkspace, so in the future with root access (we currently don't have root) it should be usable in its gaming mode. But at present your going to have to play without one of the black sharks main selling points if you want to use your dual shock for.
This is also the case for all my 3rd party controllers, one user has claimed success with an ipega controller, but I've not got one to test, note planning on getting one.
The official controllers for the blackshark 2 are probably going to be the best option for full compatability unfortunately
Thanks bro!! I appreciate the time and dedication in the response, greetings. Maxx.-
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection ?
Rishabh1x said:
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection
Click to expand...
Click to collapse
I've tried a DS3, ds4, c.t.r.l and a nvidia shield bt controller, none worked inside sharkspace all worked outside.
I also manually changed the master addresses of the controllers aswell via a pc to match the blackshark2 with no success, tried various gamepad mappers also with no success.
As above there's a post on here somewhere someone recogned the i.p.e.g.a controllers work but personally I am not willing to buy one to test, maybe if someone with a legitimate blackshark2 controller would mind sharing the master bt address the controllers use we could use a pc to change our controllers (ds4 etc) to match, and maybe the blackshark would recognise our Bluetooth controllers as the official ones in sharkspace and stay connected.
That's my only other suggestion/idea untill we have Root access, and even then if they connect and they still probably won't, I dunno if there would be input issues caused as a result of the hardware not matching the software
As far as your otg controller is concerned does it connect and function as intended outside of sharkspace?
It doesn't work at all using otg. It says charging device ?
Just tried again, so my controller has two config dinput mode and xinput mode. Turns out one of them works and the other is not recognised. I think the xinput mode is what works and when I switch to it the controller works outside and inside shark space as well. Although, the button are a bit wrong but i remap them in game and i can play fortnite without any issues. I will still buy the black shark gamepad 2.0 though.
Your absolutely correct buddy thank you.
Dinput controllers such as the ds4 are not working inside sharkspace.
The nintendo switch joycons use xinput and work with the blackshark inside sharkspace. I did notice some input lag on the joycons but to be honest I wasnt playing the best game to test a controller. The switch pro controller also uses xinput so will assume that works aswell, but again not got one to test.
I have the Black Shark Gamepad 2.0, which is unfortunately a bit of a disappointment. It has some very strange aspects to it: Y button cannot be mapped in Shark Space mode, it acts as some toggle between touch screen emulation and mouse cursor mode, which I don't understand why someone would use that. It's useless to me as someone who wants it solely for emulators.
When used outside of Shark Space mode, the DPad and the lettered face buttons both register as the same thing A/B/X/Y buttons. Also, the right touchpad does not act like a stick, instead it acts like a mouse.
On top if this, there are no start, select or L3/R3 buttons. This amounts to playing in Shark Space mode leaving you 5 buttons short of a full controller and outside Shark Space to playing 8 buttons short.
I could get the master BT address for you but I am not exactly sure how to do it. Do I just need to pair it to a PC and do... what?
Has anyone tried using the Xbox 360 controllers
Hi everyone,
I'm really disappointed as I have tried to play using PlayStation 4 controller redmagic 6 global rom but unfortunately it's not working properly as I faced movement issue like "delay"
" specially when I play cod mobile, I have recorded a video see below link,
I really hope someone can help me with this as l had tried to communicated with nubia technical team but unfortunately they did not help me.
Also I was thinking to root my phone hoping maybe will solve this but I'm not sure.
call of duty mobile issue.mp4
drive.google.com
I have the same issue. I find I dominate using the triggers on the red magic though.
A work around I do is using my razer Kishi, I connect my ps4 controller and play with the razer Kishi with no lag. Ps4 controller needs to be connected but u don't actually use it cos the lag over Bluetooth is like you've shown
Mind to suggest for trying gamesir x2 gamepad. It is working like a charm! Beside, it is cheaper than razer Kishi in my country currency.
Dual Shock controller work fine but do not use bluetooth use cable like this
I'm having all sorts of issues, tried with cod and could only get a few of the buttons to work, no movement at all. I get the same when trying Xbox cloud too. A couple of the buttons work but sticks nor d-pad has any input what so ever. Am I missing something?