Related
It is stuck on a screen with the battery. I can get to bootloader mode but cannot get into recovery. Bootloader is locked... Please help
Basically I had the bootloader unlocked and it was rooted. I unrooted the phone and then I locked the bootloader and I am here now. Just wanted to make it go back to stock.
Is it a carrier model or a play store
https://forum.xda-developers.com/pixel-xl/how-to/psa-read-ca-bootloader-t3494615
This.
chapelfreak said:
Is it a carrier model or a play store
Click to expand...
Click to collapse
Google store
ASimpleSock said:
https://forum.xda-developers.com/pixel-xl/how-to/psa-read-ca-bootloader-t3494615
This.
Click to expand...
Click to collapse
I see the thread but it doesnt seem like theres a fix in it
tryfont said:
I see the thread but it doesnt seem like theres a fix in it
Click to expand...
Click to collapse
There probably isn't, if you've altered system and relock and toggle OEM unlocking off in dev. options you get bricked.
tryfont said:
It is stuck on a screen with the battery. I can get to bootloader mode but cannot get into recovery. Bootloader is locked... Please help
Basically I had the bootloader unlocked and it was rooted. I unrooted the phone and then I locked the bootloader and I am here now. Just wanted to make it go back to stock.
Click to expand...
Click to collapse
Did you try:
fastboot flashing unlock
Since you only relocked, you unlikely toggled "OEM unlock"?!
If it fails, I think you are SOL. Maybe someone with a proper solution will chime in. Otherwise, you have to RMA your device...
Good luck...
5.1 said:
Did you try:
fastboot flashing unlock
Since you only relocked, you unlikely toggled "OEM unlock"?!
If it fails, I think you are SOL. Maybe someone with a proper solution will chime in. Otherwise, you have to RMA your device...
Good luck...
Click to expand...
Click to collapse
It just says waiting for device and hangs there... I don't think it recognizes the phone
EDIT: IT WORKED!!!!!
It wouldnt recognize it and I ran fastboot continue and it just hanged there but I went into the bootloader mode and for like a quarter of a second it recognized it and forced it to boot
tryfont said:
It just says waiting for device and hangs there... I don't think it recognizes the phone
Click to expand...
Click to collapse
Open device manager in windows. Plug your phone and see how is your phone recognized.?!
5.1 said:
Open device manager in windows. Plug your phone and see how is your phone recognized.?!
Click to expand...
Click to collapse
Im on mac but its good now I edited my comment above. Only question is how to I completely clean the OS so I can relock bootloader without running into the same problem
This is whats happening to me- https://goo.gl/photos/2kv9Xo3HM3Mqn8AQ9
tryfont said:
Im on mac but its good now I edited my comment above. Only question is how to I completely clean the OS so I can relock bootloader without running into the same problem
Click to expand...
Click to collapse
Hey... Go into recovery and perform a factory reset.
Reboot bootloader and flash stock firmware. You could flash both slots to be sure your device is completely clean.
I wrote a how-to for someone having another issue. You.can follow this:
https://forum.xda-developers.com/showpost.php?p=71849370&postcount=28
When you are finished with flashing, reboot to be sure your system boot properly and your phone works as it should...
From here you can reboot into bootloader and issue:
fastboot flashing lock
If It was me I'd leave it unlocked though... Or at least OEM unlock enabled and ADB debugging ON. Since Google tend to release messed up OTA, you can always unlock the bootloader if needed.
But if you wish you can also disable the OEM unlock.
Good luck...
5.1 said:
Hey... Go into recovery and perform a factory reset.
Reboot bootloader and flash stock firmware. You could flash both slots to be sure your device is completely clean.
I wrote a how-to for someone having another issue. You.can follow this:
https://forum.xda-developers.com/showpost.php?p=71849370&postcount=28
When you are finished with flashing, reboot to be sure your system boot properly and your phone works as it should...
From here you can reboot into bootloader and issue:
fastboot flashing lock
If It was me I'd leave it unlocked though... Or at least OEM unlock enabled and ADB debugging ON. Since Google tend to release messed up OTA, you can always unlock the bootloader if needed.
But if you wish you can also disable the OEM unlock.
Good luck...
Click to expand...
Click to collapse
I'm pretty inexperienced with this kind of stuff and so you might have to explain it a bit further than what that link says. I did fastboot reboot bootloader in terminal but it can't find my device. Also I couldnt get into recovery when it was bricked so I probably still can't
tryfont said:
I'm pretty inexperienced with this kind of stuff and so you might have to explain it a bit further than what that link says. I did fastboot reboot bootloader in terminal but it can't find my device
Click to expand...
Click to collapse
Hey...
You boot into bootloader when the Device is powered off
Just like in your video: with power + volume down
You can see infos regarding:
Bootloader
Radio
S/N
DRAM
Boot-slot=
Etc...
This is the bootloader :good:
From here, unzip the google image you have downloaded, open the folder and from here run the flash-all script. Let your device reboot. Power it down, boot into bootloader again with power + volume down. Change active slot as I described in the link I gave you previously. Run the same flash-all again... Done!
Just for safety, remove your Google account before you continue. You'll add it again later...
Good luck...
5.1 said:
Hey...
You boot into bootloader when the Device is powered off
Just like in your video: with power + volume down
You can see infos regarding:
Bootloader
Radio
S/N
DRAM
Boot-slot=
Etc...
This is the bootloader :good:
From here, unzip the google image you have downloaded, open the folder and from here run the flash-all script. Let your device reboot. Power it down, boot into bootloader again with power + volume down. Change active slot as I described in the link I gave you previously. Run the same flash-all again... Done!
Just for safety, remove your Google account before you continue. You'll add it again later...
Good luck...
Click to expand...
Click to collapse
Alright thank you so much its doing the flashing right now. I really appreciate you helping...I was worried I'd have to get a replacement through google. Have a great day lad
tryfont said:
Alright thank you so much its doing the flashing right now. I really appreciate you helping...I was worried I'd have to get a replacement through google. Have a great day lad
Click to expand...
Click to collapse
Hey... Flash both slots... Just to be sure both are clean and nothing problematic​ remains on your device before locking your bootloader!
It could brick installing an OTA or whatever. Better restart 100% clean. :good:
Cheers...
Just flash the flash-all, relock and call it a day. Then you'll be fully stock and locked. I would however recommend rebooting once before locking to make sure its all good.
tryfont said:
It is stuck on a screen with the battery. I can get to bootloader mode but cannot get into recovery. Bootloader is locked... Please help
Basically I had the bootloader unlocked and it was rooted. I unrooted the phone and then I locked the bootloader and I am here now. Just wanted to make it go back to stock.
Click to expand...
Click to collapse
Hey man I have the same problem you can try calling Google support they can send you a replacement if you still have a warranty
my warranty has expired so I'm on my own
Hello guys I have H815 and I can't proceed with unlocking bootloader cause my phone cannot boot into bootloader/fastboot mode. I'm not newbie, but with this phone everything goes ****ing different than in instruction.
I the instruction there is adb reboot bootloader. Of course my phone is seen in adb mode but after this command it just reboot to system. I tried also key combinations with no luck...
What to do?
My system is android 6
remialfa said:
Hello guys I have H815 and I can't proceed with unlocking bootloader cause my phone cannot boot into bootloader/fastboot mode. I'm not newbie, but with this phone everything goes ****ing different than in instruction.
I the instruction there is adb reboot bootloader. Of course my phone is seen in adb mode but after this command it just reboot to system. I tried also key combinations with no luck...
What to do?
My system is android 6
Click to expand...
Click to collapse
Hi,
I'm the same...
looking for solution I found this on Youtube:
Pratically, you have to press vol up while connect USB on PC....
I haven't the G4 with my today and so I cannot test if this is a valid mode...
If you do this, let me know if you can enter in fastboot mode
auceto63 said:
Hi,
I'm the same...
looking for solution I found this on Youtube:
Pratically, you have to press vol up while connect USB on PC....
I haven't the G4 with my today and so I cannot test if this is a valid mode...
If you do this, let me know if you can enter in fastboot mode
Click to expand...
Click to collapse
I did that and yeah it entered this mode but it's not valid bootloader/fastboot mode. It's some service mode to update firmware. Anyway it's not visible in pc as a normal fastboot and I cannot proceed further with unlocking bootloader...
Edit: it's download mode... So as I said it's not fastboot mode.
Anyone can help?
Seriously nobody? I thought this phone has good community and support...
I'm facing the exact same problem with my H810 on 6.0. Sick of not being able to root atleast.
Seriously hasn't anyone on earth found a way to boot this **** in fastboot? I mean there are a number of tutorials but everything goes different as F*** with this thing. Hope someone will update with good news. :fingers-crossed::fingers-crossed:
charith262 said:
I'm facing the exact same problem with my H810 on 6.0. Sick of not being able to root atleast.
Seriously hasn't anyone on earth found a way to boot this **** in fastboot? I mean there are a number of tutorials but everything goes different as F*** with this thing. Hope someone will update with good news. :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
You can check out UsU. That is an unofficial bootloader unlock
ThePiGuy said:
You can check out UsU. That is an unofficial bootloader unlock
Click to expand...
Click to collapse
Thanks yeah I checked but that's for ARB<=2 devices. I forgot to mention earlier this godforsaken thing is ARB3.
I have an H811 (T-Mo) running firmware H81120p, ARB3. Doesn't seem to be much that can be done with it as far as rooting. It also has no stock recovery, only boots to system.
you did follow this official guide right? it unlocked mine after a few angry moments
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev
use minimal ADB https://forum.xda-developers.com/showthread.php?t=2317790
Only way to boot twrp later is to use fastboot with ADB, recovery with buttons doesn't work.
if the device wont boot a rom use adb to get back in recovery.
if you use bank apps, install magisk before installing rom, do not get SU
samadee3 said:
you did follow this official guide right? it unlocked mine after a few angry moments
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev
use minimal ADB https://forum.xda-developers.com/showthread.php?t=2317790
Only way to boot twrp later is to use fastboot with ADB, recovery with buttons doesn't work.
if the device wont boot a rom use adb to get back in recovery.
Click to expand...
Click to collapse
Only problem is that the info linked to above applies to ONE G4 variant only - the H815 international model. The rest of us are SOL. The bootloader on US carrier G4 - AT&T, T-Mo, VzW, etc (most later firmware revisions for G3 as well) models has been nailed down. The only exception is a G4 with ARB <= 2 can be hacked with UsU in order to root it and install a custom recovery.
SofaSpud said:
Only problem is that the info linked to above applies to ONE G4 variant only - the H815 international model. The rest of us are SOL. The bootloader on US carrier G4 - AT&T, T-Mo, VzW, etc (most later firmware revisions for G3 as well) models has been nailed down. The only exception is a G4 with ARB <= 2 can be hacked with UsU in order to root it and install a custom recovery.
Click to expand...
Click to collapse
Tmo is very easy
Go to dev options and enable adb
Then run "adb reboot bootloader"
Once there, run "fastboot oem unlock" and voila, you have an officially unlocked bootloader with no restrictions related to UsU
Please be aware the above will factory reset your device
ThePiGuy said:
Tmo is very easy
Go to dev options and enable adb
Then run "adb reboot bootloader"
Once there, run "fastboot oem unlock" and voila, you have an officially unlocked bootloader with no restrictions related to UsU
Please be aware the above will factory reset your device
Click to expand...
Click to collapse
Do you know anyone who has done it with H81120o or later? I've seen posts for two yrs about doing it that way, but I don't remember reading about it being done on 20o or later.
Sent from my SAMSUNG-SM-G935A using Tapatalk
SofaSpud said:
Do you know anyone who has done it with H81120o or later? I've seen posts for two yrs about doing it that way, but I don't remember reading about it being done on 20o or later.
Click to expand...
Click to collapse
Why v20o
Remember, this has nothing to do with UsU and therefore ARB etc doesn't matter
Edit: ps there are loads of H811 users in my Lineage thread and the other ROMs too
ThePiGuy said:
Why v20o
Remember, this has nothing to do with UsU and therefore ARB etc doesn't matter
Edit: ps there are loads of H811 users in my Lineage thread and the other ROMs too
Click to expand...
Click to collapse
Got it. Guess that it makes sense. ARB prevents rolling back to earlier release than 20o, I'm ok. Will try the BL unlock today then.
Sent from my SAMSUNG-SM-G935A using Tapatalk
I actually managed to get my LG V20 F800L into same situation after messing up my rooting process.
First i was stuck at logo and factory reset did nothing. Bootloader was working then.
Then i downloaded new firmware through "Download Mode", and after that i lost access to bootloader.
I know the phone model is different, but process seems to be very similar for all LG devices.
Trying to troubleshoot that atm, if i'll have results i'll post them here.
P.S. I know original poster long left (probably after throwing phone into a grinder), but maybe for someone with same problem as us in the future the info will be useful.
Florimer said:
I actually managed to get my LG V20 F800L into same situation after messing up my rooting process.
First i was stuck at logo and factory reset did nothing. Bootloader was working then.
Then i downloaded new firmware through "Download Mode", and after that i lost access to bootloader.
I know the phone model is different, but process seems to be very similar for all LG devices.
Trying to troubleshoot that atm, if i'll have results i'll post them here.
P.S. I know original poster long left (probably after throwing phone into a grinder), but maybe for someone with same problem as us in the future the info will be useful.
Click to expand...
Click to collapse
Ok, now i have to reply to my own post, since i believe i understand now something important:
LG phones usually dont have bootloader open to access. Until you use some exploits to do so.
I did not know that at the time of writing that reply.
Florimer said:
Ok, now i have to reply to my own post, since i believe i understand now something important:
LG phones usually dont have bootloader open to access. Until you use some exploits to do so.
I did not know that at the time of writing that reply.
Click to expand...
Click to collapse
Do you have more details about this? I seem to be in a similar situation than you and I'm struggling to make it work.
Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.
Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk
superchilpil said:
Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I do have a computer, a Windows 10 Pro
Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.
sliding_billy said:
Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.
Click to expand...
Click to collapse
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.
eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.
coolhandz said:
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.
Click to expand...
Click to collapse
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".
sliding_billy said:
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.
Click to expand...
Click to collapse
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.
Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.
sliding_billy said:
Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.
Click to expand...
Click to collapse
Yeah, so I locked using "fastboot flashing lock" but then it doesn't start, saying that there is no operating system or something like that. I freaked out and was able to unlock again using "fastboot flashing unlock". Now all is wiped. I guess I need to flash the oem rom first, then lock. I'll have to do this all later tonight. Just glad that I didn't brick it yet.
eec007 said:
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.
Click to expand...
Click to collapse
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.
bobby janow said:
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.
Click to expand...
Click to collapse
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.
eec007 said:
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.
Click to expand...
Click to collapse
One thing I would do before I relocked the bl would be to do the full login procedure, email everything other than apps. Then make sure you're on the Nov update in about phone, I'm sure you will be, and then fastboot relock the bl with the proper command. It will wipe the device again but it's a small price to pay for about 10 minutes of work. Then once it reboots and there is no more error message you'll be fully stock. Enable dev options again and make sure the oem switch is active allowing bl unlock. Then you're done. I've gotten to the point on my 5X where I even flip the oem switch so it can't be bl unlocked until I go in and flip it back. Dangerous if you're flashing stuff but not so much if you're just taking OTAs. That's of course your call entirely. Good luck.
eec007 said:
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".
Click to expand...
Click to collapse
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
eec007 said:
Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.
Click to expand...
Click to collapse
They're right to mention that relocking a modified device can result in a brick.
Your best bet is to go to https://developers.google.com/android/images#taimen
Follow the directions to the "T", then relock it if you are really really sure that the unlock screen bothers you.
Would suggest to do this anyway, no matter future unlock status.
TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
I agree with most of your post other than waiting for the next OTA before you lock the bootloader. Why would he need to do that? If he's stock, and he'll see that immediately, then relock it. He doesn't want root or Magisk but only wants banking and Pay. With the slider allowing bl unlock he's in no danger whatsoever. Lock and relock whenever he wants. OTA will not disallow the slider once it's set.
TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
Thank you for explaining this. I had thought that the Developer Option slider was to unlock the bootloader, but your explanation clarifies it, the slider is to allow the bootloader to be unlocked...
Ok, so I tried to flash the factory image using adb flash-all and it keeps getting the error:
Sending sparse 'vendor_a' 2/2 (193888 KB) FAILED (Error reading sparse file)
Now the phone is not working at all and says that "device is corrupt" and will not boot past the white google screen. I can try again using adb, but it is the same error each time. I tried to download the image again and same sparse error. I can also fastboot in TWRP, but not sure what to do in there. What am I doing wrong? I guess I should've rooted and used Magisk like others have said.
turns out changing to a different cable resolved my sparse error and I was then successfully able to apply the factory image and lock the device. Thanks everyone for the help.
I would like to thank everyone for there support for this most awesome but difficult phone. I have an unlocked US LG V30+ phone which an error in cross flashing accidently caused my phone to loose everything I needed to use LGUP. Does anyone know of an exe rom to flash on this phone to regain download option or a full restore to start fresh to do the rooting the right way? I know some mobile devices have exe for full restore but haven't found one for this phone yet.
Thanks again and I hope for a possible positive answer.
mcarden2006 said:
I would like to thank everyone for there support for this most awesome but difficult phone. I have an unlocked US LG V30+ phone which an error in cross flashing accidently caused my phone to loose everything I needed to use LGUP. Does anyone know of an exe rom to flash on this phone to regain download option or a full restore to start fresh to do the rooting the right way? I know some mobile devices have exe for full restore but haven't found one for this phone yet.
Thanks again and I hope for a possible positive answer.
Click to expand...
Click to collapse
Your bootloader is NOT relocked unless you flashed fastboot command to re-lock it.
Your bootloader is still unlocked.
ChazzMatt said:
Your bootloader is NOT relocked unless you flashed fastboot command to re-lock it.
Your bootloader is still unlocked.
Click to expand...
Click to collapse
It's locked.
mcarden2006 said:
It's locked.
Click to expand...
Click to collapse
Then start over to unlock bootloader https://forum.xda-developers.com/showpost.php?p=76584629&postcount=193
So, long story short I recently decided to try and root my oneplus7t I unfortunately made some mistakes and somehow corrupted some files. I read elsewhere in the forum that I could download the stock rom which I did and then use flash-all and that would allow me to go back to the factory settings so I could lock the oem and just go back to normal because I was tired of the headache. Unfortunately, after using flash-all I locked the oem thinking everything should be stock and it would work properly. But it says device is corrupt and trying to unlock the oem says oem unlocking is disabled.
So did I just completely brick my phone? I don't know of anyway to fix it at this point :/.
kschmitz4 said:
So, long story short I recently decided to try and root my oneplus7t I unfortunately made some mistakes and somehow corrupted some files. I read elsewhere in the forum that I could download the stock rom which I did and then use flash-all and that would allow me to go back to the factory settings so I could lock the oem and just go back to normal because I was tired of the headache. Unfortunately, after using flash-all I locked the oem thinking everything should be stock and it would work properly. But it says device is corrupt and trying to unlock the oem says oem unlocking is disabled.
So did I just completely brick my phone? I don't know of anyway to fix it at this point :/.
Click to expand...
Click to collapse
Can you still boot into bootloader via the hardware keys, whatever that combo is on the 7t?
Boot to bootloader or recovery and factory reset it or so.
Josh McGrath said:
Can you still boot into bootloader via the hardware keys, whatever that combo is on the 7t?
Boot to bootloader or recovery and factory reset it or so.
Click to expand...
Click to collapse
I can get to the bootloader but it's Device State -locked and when I tell it to boot into recovery it says the device is corrupt. When I use fastboot to oem unlock it says I cannot, and I can't flash when oem is locked either.
kschmitz4 said:
I can get to the bootloader but it's Device State -locked and when I tell it to boot into recovery it says the device is corrupt. When I use fastboot to oem unlock it says I cannot, and I can't flash when oem is locked either.
Click to expand...
Click to collapse
Try
fastboot erase userdata and
Fastboot erase cache
Let me know if that works or not we will move on. Probably won't work since it's bootloader locked
You may have to contact OP and while you're at it, get the MSM tool for us all :good:
It says erase is not allowed in locked state . I think this is probably all she wrote for this one. I think I'm just going to send it back tbh, the whole reason I was trying to root it was because it didn't work with Sprint like they said it would. and I was wondering if I could find a way too make it work with custom software. Thanks for trying
Are you able to flash one of these Fastboot ROMs?
Maybe Sideload can work!
https://support.oneplus.com/app/answers/detail/a_id/4583/kw/7t here is official stock file.
https://forums.oneplus.com/threads/how-to-do-flash-through-adb-sideload.509377/
https://www.the***********.com/sideload-ota-update-stock-recovery-adb/
Please refer above links for your knowledge purpose maybe it can help.....
I unfortunately no longer have Twrp installed as I did a flash-all with a stock rom already . If I try and flash recovery it says "flashing is not alllowed in lock state". Sideloading wasn't functional back when I had twrp either as the functionality for it is still in progress. I'll probably try contacting support one more time and see if I can get a T2 who can unbrick it, otherwise I'm just going to send it back. Thanks for the attempts guys!
Edit: As to the flashboot roms I flash-all'ed one of them and that's how I got into this mess :/.
kschmitz4 said:
I unfortunately no longer have Twrp installed as I did a flash-all with a stock rom already . If I try and flash recovery it says "flashing is not alllowed in lock state". Sideloading wasn't functional back when I had twrp either as the functionality for it is still in progress. I'll probably try contacting support one more time and see if I can get a T2 who can unbrick it, otherwise I'm just going to send it back. Thanks for the attempts guys!
Edit: As to the flashboot roms I flash-all'ed one of them and that's how I got into this mess :/.
Click to expand...
Click to collapse
I ended up needing to flash the fastboot 10.0.3 firmware and was able to do a local upgrade to 10.0.4 that way, then flashing a patched boot.img via fastboot
I can't run any flash commands as my oem is locked. I don't suppose there's anyway around that?
kschmitz4 said:
I can't run any flash commands as my oem is locked. I don't suppose there's anyway around that?
Click to expand...
Click to collapse
How did you flash twrp with it oem locked??That doesnt make sense
I had twrp on it when the oem was unlocked, I was trying to reset the device to stock, so I did a flash-all and then oem locked it. But for some reason the repair was unsuccessful, and now it says my device is corrupted and I forgot to turn on oem unlocking in the settings on my phone after the flash-all before I did the oem-lock.
kschmitz4 said:
I had twrp on it when the oem was unlocked, I was trying to reset the device to stock, so I did a flash-all and then oem locked it. But for some reason the repair was unsuccessful, and now it says my device is corrupted and I forgot to turn on oem unlocking in the settings on my phone after the flash-all before I did the oem-lock.
Click to expand...
Click to collapse
You should have no issues reflashing the stock images
I cannot flash anything. Because my OEM state is locked.
Boot to Stock Recovery ?
Holding for a long time Volume Down + Power Buttons while booting your phone ?
Volume down plus power button takes me to "Your device is corrupt and will not boot"
kschmitz4 said:
Volume down plus power button takes me to "Your device is corrupt and will not boot"
Click to expand...
Click to collapse
Looks like you will need the MSM tool to fix this issue. You'll have to contact OP support and they will remote in your PC, load their software and flash it 100pct back to stock.
Also, disconnect them before they can delete the MSM tool so we can have it here in the community
kschmitz4 said:
Volume down plus power button takes me to "Your device is corrupt and will not boot"
Click to expand...
Click to collapse
Press volume up/down and power, reboot to fastboot. Unlock bootloader again. Install update from settings, reboot and install it again. (local install)
Factory reset in setting, reboot fastboot, lock bootloader. Reboot and untick unlock bootloader in developer settings.
Don't know if it's too late but I believe there's a working MSM tool now