Android 12 roms with 48mp camera - Redmi Note 8 Questions & Answers

Hello guys , out of curiosity , can anyone explain why we can't have the miui camera with 48mp or a gcam that supports the auxiliary cameras to fully work on A12 roms ? Since there's already a xiaomi.eu rom of miui13a12 rom available ..

kapetchou said:
Hello guys , out of curiosity , can anyone explain why we can't have the miui camera with 48mp or a gcam that supports the auxiliary cameras to fully work on A12 roms ? Since there's already a xiaomi.eu rom of miui13a12 rom available ..
Click to expand...
Click to collapse
-48mp on RN8 is just a gimmick, it's not a real 48mp
-the MI Cam used in A10 and some 11 roms is a port from MI A3 because it does not require miui framework to work, so up until now there is no port of RN8 real cam app on any rom
-vendor drivers are differant on A12 and are very hard to port (devs are strugling to port basic features to A12 right now, so porting cam libs is close to impssible)
if you want the best result you have to use A10/11 + aryaman lib patcher to use pie chromatix libs
(or use a rom that already have it) MIUI nerfed the cam quality in all their roms
(keep in mind that the patcher have limited support for A11 / full on A10)

loopypalm said:
-48mp on RN8 is just a gimmick, it's not a real 48mp
-the MI Cam used in A10 and some 11 roms is a port from MI A3 because it does not require miui framework to work, so up until now there is no port of RN8 real cam app on any rom
-vendor drivers are differant on A12 and are very hard to port (devs are strugling to port basic features to A12 right now, so porting cam libs is close to impssible)
if you want the best result you have to use A10/11 + aryaman lib patcher to use pie chromatix libs
(or use a rom that already have it) MIUI nerfed the cam quality in all their roms
(keep in mind that the patcher have limited support for A11 / full on A10)
Click to expand...
Click to collapse
Which rom are you using and which lib patch version?

Danilo-Sanchez said:
Which rom are you using and which lib patch version?
Click to expand...
Click to collapse
i'm using Zhan 8.7.3 (20210923) which have built-in chromatix libs
if you use any other build i suggest you use recovery version of the libs (the patch have LOT of files so if you use magisk version it will delai the boot time a little ...)

loopypalm said:
i'm using Zhan 8.7.3 (20210923) which have built-in chromatix libs
if you use any other build i suggest you use recovery version of the libs (the patch have LOT of files so if you use magisk version it will delai the boot time a little ...)
Click to expand...
Click to collapse
Does this build pass safetynet?

Danilo-Sanchez said:
Does this build pass safetynet?
Click to expand...
Click to collapse
idk, i don't use google at all
there are modules to pass that ...

loopypalm said:
idk, i don't use google at all
there are modules to pass that ...
Click to expand...
Click to collapse
Is there any other way to use banking apps or you don't use it?

Danilo-Sanchez said:
Is there any other way to use banking apps or you don't use it?
Click to expand...
Click to collapse
if saftynet pass they should work (they don't need google services to work,but they rely on saftynet pass to check if your phone is "secure" (which is stupid since all transaction are server side and not device side)
i don't remember the devs notes but i remember people said they work

Related

Any ZUI Camera alternative for selfies?

So I flashed AEX 5.1 and I noticed the picture quality of front facing camera has degraded a lot. I used to get pretty okayish selfies on stock but it had gone downhill on custom ones.
My question is if there's any app that can substitute for ZUI camera in terms of selfies?
Use Gcam mod. Best
Ayush Rathore said:
Use Gcam mod. Best
Click to expand...
Click to collapse
Do we just have to install the Gcam mod's apk file in an oreo rom ? I am using the pixel experience rom could you pls tell me how to use Gcam mod ? ( i have a rooted the device via magisk )
AnishAcharya07 said:
Do we just have to install the Gcam mod's apk file in an oreo rom ? I am using the pixel experience rom could you pls tell me how to use Gcam mod ? ( i have a rooted the device via magisk )
Click to expand...
Click to collapse
Download, install (like you do for a normal apk.) And use in the way you want.

Should I install Rom based on Android 8.1 or 7/7.1 to get the best GCAM expierence ?

should i install AEX 4.6 ( Noughat ) on my land compared to the Android 8.1 oreo roms which have lots of problems with the front cam portrait mode ?
even if i install AEX 4.6 plz someone tell which is the best version of GCAM should i flash and also link of the magisk module (if required)
P.S. - Noobie Question
ayonavo said:
should i install AEX 4.6 ( Noughat ) on my land compared to the Android 8.1 oreo roms which have lots of problems with the front cam portrait mode ?
even if i install AEX 4.6 plz someone tell which is the best version of GCAM should i flash and also link of the magisk module (if required)
P.S. - Noobie Question
Click to expand...
Click to collapse
7.1.2 will work fine with front and rear potrait and video recording too.
The version which is most stable and i use is "GcamMod5 from arnova v1.6"
And rom i use is lineageos official
Smooth best in performance too!
Rom is your choice but 7.1.2 based roms are best for modded gcam!
Did you flashed any fix to enable HAL 3 Or just directly flashed the GCAM ?
aakashmaji16 said:
7.1.2 will work fine with front and rear potrait and video recording too.
The version which is most stable and i use is "GcamMod5 from arnova v1.6"
And rom i use is lineageos official
Smooth best in performance too!
Rom is your choice but 7.1.2 based roms are best for modded gcam!
Click to expand...
Click to collapse
Did you flashed any fix to enable HAL 3 Or just directly flashed the GCAM ?
ayonavo said:
Did you flashed any fix to enable HAL 3 Or just directly flashed the GCAM ?
Click to expand...
Click to collapse
You need to enable camera2api aka hal3
please tell me how to activate it ? can we do it using magisk module fix ?
aakashmaji16 said:
You need to enable camera2api aka hal3
Click to expand...
Click to collapse
please tell me how to activate it ? can we do it using magisk module fix ?
ayonavo said:
please tell me how to activate it ? can we do it using magisk module fix ?
Click to expand...
Click to collapse
I don't know about magisk module fix
But i do it like this:
1. Install the app from playstore called "build.prop editor"
2. Give root access to the app
3. Tap edit icon. Go to the last line and add without quotes "persist.camera.HAL3.enabled=1"
4. Save it and reboot. Done.
I'm sure that module of magisk must contain this line and add it to the correct file
So what i said is manually enabling it.
Flashing that module will reduce your work!
ayonavo said:
please tell me how to activate it ? can we do it using magisk module fix ?
Click to expand...
Click to collapse
add this code to ur build prop file usin a root file explorer like es and reboot :-
persist.camera.HAL3.enabled=1
or search for camera 2 api magisk module on google and flash it
and for ROM I'd suggest viper os v3.1.1 Android v7.1.2
most stable and customizable rom available for our land in my view ?
Use viper os 7.1.2 aroma best rom .
TBH I think GCAM performance in 7.1.2 better than 8.1
aakashmaji16 said:
7.1.2 will work fine with front and rear potrait and video recording too.
The version which is most stable and i use is "GcamMod5 from arnova v1.6"
And rom i use is lineageos official
Smooth best in performance too!
Rom is your choice but 7.1.2 based roms are best for modded gcam!
Click to expand...
Click to collapse
I'm using the same but getting blurry photos on portrait also changed some settings but getting greenish photos now..
Please share your Gcam settings.

is there a working gcam port for redmi 5a MIUI 10

I was using "GoogleCamera-Pixel2Mod-Arnova8G2-V8.apk" In MIUI 9 and it worked fine after enabling camera2api causing the stock camera app to crash. But in MIUI 10 even after enabling camera2api stock camera is working and gcam is not. I have tried BSG, Arnova8G2 and scrubber gcam ports none of them seem to work.
NaAnBcEhEuL9A8K7 said:
I was using "GoogleCamera-Pixel2Mod-Arnova8G2-V8.apk" In MIUI 9 and it worked fine after enabling camera2api causing the stock camera app to crash. But in MIUI 10 even after enabling camera2api stock camera is working and gcam is not. I have tried BSG, Arnova8G2 and scrubber gcam ports none of them seem to work.
Click to expand...
Click to collapse
From what I have heard GCam is useless on MIUI 10 stable as it does not have Camera2 application programming interface implemented in it, which means adding the line HAL3....... Or using camera2api module by magisk wont enable it. So to use gcam u either have to use Cusrom or go back to miui 9 or just wait till xiaomi implements this API in their further updates.
adityam0338 said:
From what I have heard GCam is useless on MIUI 10 stable as it does not have Camera2 application programming interface implemented in it, which means adding the line HAL3....... Or using camera2api module by magisk wont enable it. So to use gcam u either have to use Cusrom or go back to miui 9 or just wait till xiaomi implements this API in their further updates.
Click to expand...
Click to collapse
Very sad feeling. I don't think Xiaomi will add it back. If they will add it in the future then why did they remove it in the first place. That's it I'm moving to a custom rom.
NaAnBcEhEuL9A8K7 said:
Very sad feeling. I don't think Xiaomi will add it back. If they will add it in the future then why did they remove it in the first place. That's it I'm moving to a custom rom.
Click to expand...
Click to collapse
They may add it. At least it was supposed in beta 8.11.8 but i can't say for sure since beta updates for riva have been suspended since the 8.11.1 update for testing oreo. U can check out this article.
https ://www.gizmochina.com/2018/11/12/miui-10-v8-11-8-beta-rom-opens-doors-for-google-camera-app-support/
U can wait for a few days if u wish. Good luck if ur going custom. Hope i too could do so.
adityam0338 said:
They may add it. At least it was supposed in beta 8.11.8 but i can't say for sure since beta updates for riva have been suspended since the 8.11.1 update for testing oreo. U can check out this article.
https ://www.gizmochina.com/2018/11/12/miui-10-v8-11-8-beta-rom-opens-doors-for-google-camera-app-support/
U can wait for a few days if u wish. Good luck if ur going custom. Hope i too could do so.
Click to expand...
Click to collapse
Thank you for the reply I already downloaded a custom rom but haven't flashed yet. There isn't any custom rom feature packed lile MIUI for redmi 5a. I can wait until the next update.
NaAnBcEhEuL9A8K7 said:
Thank you for the reply I already downloaded a custom rom but haven't flashed yet. There isn't any custom rom feature packed lile MIUI for redmi 5a. I can wait until the next update.
Click to expand...
Click to collapse
As a matter of fact there is. Have u tried Xiaomi.eu roms? They arey based on MIUI china version but heavily debloated and with a lot of perks.
adityam0338 said:
As a matter of fact there is. Have u tried Xiaomi.eu roms? They arey based on MIUI china version but heavily debloated and with a lot of perks.
Click to expand...
Click to collapse
I haven't heard about Xiaomi.eu till now. Will try soon.
adityam0338 said:
As a matter of fact there is. Have u tried Xiaomi.eu roms? They arey based on MIUI china version but heavily debloated and with a lot of perks.
Click to expand...
Click to collapse
Now I'm using Xiaomi.eu MIUI 10 stable ROM. Still no camera2 api support.
NaAnBcEhEuL9A8K7 said:
Now I'm using Xiaomi.eu MIUI 10 stable ROM. Still no camera2 api support.
Click to expand...
Click to collapse
Sorry about that. I didn't know about it.
adityam0338 said:
Sorry about that. I didn't know about it.
Click to expand...
Click to collapse
But everything else is much better than MIUI Global ROM.
This is working
http://en.miui.com/thread-4817920-1-1.html
oke thanks will try it
Hi.
oke nice. working perfectfull using serjo GCAM
ovan febriawan said:
oke nice. working perfectfull using serjo GCAM
Click to expand...
Click to collapse
Which ROM are you using?
Good

STABLE GCAM 6.1 - No patch and no root

Hello guys!
I finally found a stable 6.1 gcam for our beloved whyred. My model is Chinese AI red. I am currently using Havoc OS 2.4 (Android 9) without any patch, root or modified kernel. All standard of rom itself.
The apk's author is marlin-ku (https://www.celsoazevedo.com/files/android/google-camera/dev-marlin-ku/)
Notice: You need camera2api enabled!
Recommendations:
Disable 4k video (use full hd)
HDR on the front camera DOES NOT WORK (but if you disable it, everything works)
Download: https://f.celsoazevedo.com/file/cfiles/gcm1/gc_6.1.021_whyred_05dm.apk
Mirror 2: https://drive.google.com/file/d/1qkGyZmehNtkF2wsu48nWXaERU6DYK_CB/view?usp=sharing
Peace :highfive:
My configs
https://ibb.co/album/djOqiv
does it work in stock miui??
Sent from my Redmi Note 5 Pro using Tapatalk
EMONESSboy said:
does it work in stock miui??
Sent from my Redmi Note 5 Pro using Tapatalk
Click to expand...
Click to collapse
I do not have the MIUI to test, just Havoc OS, but a person who has tested it and said it did not work.
Either way, feel free to test and post your evaluation to us :good:
EMONESSboy said:
does it work in stock miui??
Click to expand...
Click to collapse
Only with MIUI Pie
N1ck474 said:
Only with MIUI Pie
Click to expand...
Click to collapse
Forced closed for me, I'm on 9.4.25 Global Beta without any modifications including locked BL.
xell75 said:
Forced closed for me, I'm on 9.4.25 Global Beta without any modifications including locked BL.
Click to expand...
Click to collapse
You need enabled camera2 API to use any type of GCam
N1ck474 said:
You need enabled camera2 API to use any type of GCam
Click to expand...
Click to collapse
Okay that sucks, then I'm out. I not wanna modify my phone or use any custom Rom so long my phone gets offical updates. But thanks for the info.
xell75 said:
Okay that sucks, then I'm out. I not wanna modify my phone or use any custom Rom so long my phone gets offical updates. But thanks for the info.
Click to expand...
Click to collapse
You're right, Xiaomi should enable camera2api by default, on MIUI Pie it's just a value on build.prop, nothing more nothing less, it's awfull marketing
I have camera2api enabled but get only forced close.
I'm using MASIK 4.1 Miui pie. Front camera work fine for photos and videos. One bug is superzoom in front camera video with 60fps.
But finally we can use one GCAM TRUE Stable.
Thank you
working like a charm with masik 4.1,thanks
habbadda said:
I have camera2api enabled but get only forced close.
Click to expand...
Click to collapse
What is your ROM? Kernel? Firmware? Do you have root?
Im on LineageOS 16 with Magisk 19.1 and 9.4.18 firmware installed.
habbadda said:
Im on LineageOS 16 with Magisk 19.1 and 9.4.18 firmware installed.
Click to expand...
Click to collapse
Very interesting. I have the latest version of Havoc OS 2.4, on my Chinese note 5 with stable firmware 10.3.4, with absolutely nothing else (root, patch camera, kernel) and this was the most stable version I've ever installed on my whyred. Everything works, minus HDR on the front camera and the 4k video. Everything else works perfectly here.

Question Gcam 48mp?

Does anyone know why gcam doesn't support 48mp?
user0u said:
Does anyone know why gcam doesn't support 48mp?
Click to expand...
Click to collapse
Yes because the pixel is only 12mp so gcam is only programmed for 12mp. It sucks, even if we flash a custom rom we can't get anx camera and 48mp fix magisk module to work on Android 12. However the module does work a little bit on Android 11 custom roms for Poco F3.
Techguy777 said:
Yes because the pixel is only 12mp so gcam is only programmed for 12mp. It sucks, even if we flash a custom rom we can't get anx camera and 48mp fix magisk module to work on Android 12. However the module does work a little bit on Android 11 custom roms for Poco F3.
Click to expand...
Click to collapse
I see. Thanks!
Techguy777 said:
Yes because the pixel is only 12mp so gcam is only programmed for 12mp. It sucks, even if we flash a custom rom we can't get anx camera and 48mp fix magisk module to work on Android 12. However the module does work a little bit on Android 11 custom roms for Poco F3.
Click to expand...
Click to collapse
Which rom could work on it
And a link please for the module

Categories

Resources