Related
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Change UBOOT to match device build (included the the archive)
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- Busybox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @Hyperion70 (Original thread)
- @Sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- http://d-h.st/KNvT
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- http://d-h.st/4g9q
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2015-03-08
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Looking forward for ur new project sir
good job sir remzej, keep up the good work
Many Thanks Sir remzej, Hoping for a Kitkat Colossus... :fingers-crossed:
Thanks you so much sir Rem zej
thanks sir for the great and hard work on our device
Nice work bro, thanks for making good ROM for our devices, downloading it.
Sir Remz,
do you have a mirror for this link? like mediafire? i can't download it here, thanks a lot... more power
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
---------- Post added at 09:36 AM ---------- Previous post was at 09:35 AM ----------
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
Thank you Sir Rem Zej...!!!
I am flashing it now and will keep u updated with any lag or issues...:good:
Super Fine Works...!!!
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
---------- Post added at 05:56 PM ---------- Previous post was at 05:23 PM ----------
Sir can i flash PurePerformance X v1.4 to this rom?
Please guide
Till now known issues...
Proximity sensor malfunctions during calls...
HELP
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Bro flash the Stock JB firmware using sp tools...then it will be fine just like before..
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Can you give me the link you downloaded and flashed to your phone? I think you flash the bq Aquaris 5 HD firmware.
abhipanthi said:
Proximity sensor malfunctions during calls...
Click to expand...
Click to collapse
My proximity sensors works well during calls bro.
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
TheCardinal said:
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
Click to expand...
Click to collapse
Be sure to backup your previous IMEI/NVRAM so you can restore it using MTK Droid Tools.
abhipanthi said:
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
Click to expand...
Click to collapse
Please sir, I get an error message when flashing the Unofficial AOSP via so flastool, after loading scatter file and clicking on firmware upgrade, the error says " please make sure all necessary image file are checked to be downnloaded for "firmware upgrade"", please sir how did you pass through firmware upgrade when all files are not selected in scatter file?
Almost after an year of black patch problem in playstore and various other apps are fixed... Its a delight to use your app.. Thanks a lot.
Hi guys,
Here a quick list for the official M2 10.0 ROMs that are available from huawei:
M2 10.0 (WiFi) - http://emuirom123.dbankcloud.com/M2-A01W_EMUI3.1_Android5.1_V100R001C233B013.zip?rid=2276
M2 10.0 (WiFi / West European, Channel-Others) - http://consumer.huawei.com/ch-en/support/downloads/detail/index.htm?id=80403
M2 10.0 (GSM) - http://emuirom123.dbankcloud.com/M2-A01L_EMUI3.1_Android5.1_V100R001C233B023.zip?rid=2277
There is also the HUAWEI MediaPad M2 10.0 Quick Start Guide(M2-A01w,02,English) and the HUAWEI MediaPad M2 10.0 User Guide(M2-A01L&A01w,02,English) in case you need some help.
Cheers
Loris
I'm looking for the M2 10.0 (GSM / West European, Channel-Others) but can't find it anywhere...
error....
Sorry, for international gsm version is release a new version? I have A01L.......b007 version.
Thanks
I have TWRP recovery. How to intall please?
matata86 said:
I have TWRP recovery. How to intall please?
Click to expand...
Click to collapse
You need to flash stock recovery back to update.
Stock recovery can be extracted from stock rom and you can flash twrp back after update.
Official Huawei download links for M2-A01W and M2-A01L
Here are the official Huawei download links from the Malaysia channel support page for the Wifi and LTE versions of the M2 10.0:
Wifi-only (M2-A01W): http://download-c.huawei.com/download/downloadCenter?downloadId=86793&version=342047&siteCode=my
LTE (M2-A01L): http://download-c.huawei.com/download/downloadCenter?downloadId=86792&version=342039&siteCode=my
BTW, I've found that it doesn't really matter from which country's channel you download the ROM, at least for the EN-us language setting. You might need to customize the APN for your particular carrier, but that's about it.
Has someone new links to the newest version? For example: Wifi-only M2-A01WV100R001C100B008,......
mine is still b05. How to update to newer version ?
G975N 5 Files rom:
Android: 10.0.0 OneUI 2.0
Build Number: G975NKSU4CTC9
Date: 20.03.2020
Region: KOO
Note: im not responsible for bricking device by flash wrongly!
you can flash it by odin latest version, see flash guide in youtube for S10+ 5 file rom.
For sure links are secure and there is no worry about;i used and everything alright also packages are complete.
download G975N SOUTH KOREA File 5 rom from this link: https://xip.li/dBKeRj
Google Drive
MediaFire
thank you very much, I was looking for such rom for a long time.
Thank you so much. Do you have more latest auto patch firmware for N976N?
Stable update now live for Beta program users in India
Hopefully we get the links for the full version and I can install through Odin.
enjoylife1788 said:
Hopefully we get the links for the full version and I can install through Odin
Click to expand...
Click to collapse
This one seems to be only for Beta testers as it is just around 300 MB . They should be pushing a stable build for non beta testers soon .
In EU (netherlands/germany) they say november full srable version will come. I also will sideload (and root) the rom trough Odin.
A later build, BVK5, is now rolling out to all users in South Korea on their Fold4, F936N, and Flip4, F721N, devices.
See... https://www.gsmarena.com/samsung_ga...able_one_ui_50_with_android_13-news-56567.php
What is the difference between SM-F936N (Korea) and SM-F936B version. When I had note 20 ultra, there was one version and I could flash KOO CSC files on my Indian note ultra.
In this case I don't think I can do that.
Galaxy Z Fold 4 gets stable Android 13 (One UI 5.0) update in India
Over the past week, Samsung released the stable Android 13 update to the Galaxy Z Fold 4 in South Korea ...
www.sammobile.com
@enjoylife1788
You can download it, using SamFirm or Frija, model SM-F936B, CSC INS, which is part of OXM multi-CSC. This includes all of Europe, I think most of Asia. Full Firmware, official, signed.
Flashed it on an EUX or EUY Fold 4 using ODIN without problems, as it is part of the same multi-CSC OXM. Remember to use HOME_CSC for CSC file to keep your data.
Is VK3 stable or BETA ?
elio321 said:
Is VK3 stable or BETA ?
Click to expand...
Click to collapse
Stable
elio321 said:
Is VK3 stable or BETA ?
Click to expand...
Click to collapse
ZVK3 = Beta
BVK3 = Stable
Stable Android 13 One UI 5.0 has gained pace by rolling out to the following countries and CSC codes...
Philippines (XTC)
Malaysia (XME)
Thailand (THL)
Philippines (GLB)
Indonesia (XID)
What about USA versions?
corwin_amber said:
@enjoylife1788
You can download it, using SamFirm or Frija, model SM-F936B, CSC INS, which is part of OXM multi-CSC. This includes all of Europe, I think most of Asia. Full Firmware, official, signed.
Flashed it on an EUX or EUY Fold 4 using ODIN without problems, as it is part of the same multi-CSC OXM. Remember to use HOME_CSC for CSC file to keep your data.
Click to expand...
Click to collapse
Yes thats what I did. Thanks.
ITMASTER said:
What about USA versions?
Click to expand...
Click to collapse
U.S. Beta Testers received the stable BVK3 11 Nov. See...
Looks like beta BVK3 is officially Android 13 - Android Forums at AndroidCentral.com
Downloading now349793 Sent from my SM-F936U1 using AC Forums mobile app
forums.androidcentral.com
[email protected] said:
U.S. Beta Testers received the stable BVK3 11 Nov. See...
Looks like beta BVK3 is officially Android 13 - Android Forums at AndroidCentral.com
Downloading now349793 Sent from my SM-F936U1 using AC Forums mobile app
forums.androidcentral.com
Click to expand...
Click to collapse
What about the others that not a part of Beta program? When we get this )
Sammobile release android 13 for the model SM-F936B Panama Country, it works perfectly in Costa Rica
any update for December patch on Fold4
guyluvsgals said:
any update for December patch on Fold4
Click to expand...
Click to collapse
India, CSCS code INS, is still on the BVK3 release with the November security patch.