Develop Bugs

Post to factory reset _ Micromax a1 hard brick

Post to factory reset Micromax a1 has hard bricked. Its not turning on. not boot logo. Never rooted. Current OS Marshmallow. But whenever I connect it with laptop, Laptop is detecting and giving back a sound.
Can someone help here.

Give this a try
Install it on your pc
http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Unlock the bootloader
Root your device
Flash a custom rom(e.g. cm12.1 nightlies)

captain_nemo said:
Post to factory reset Micromax a1 has hard bricked. Its not turning on. not boot logo. Never rooted. Current OS Marshmallow. But whenever I connect it with laptop, Laptop is detecting and giving back a sound.
Can someone help here.
Click to expand...
Click to collapse
Seems like you posted this nine days ago.
Is your phone fixed?
If it isn't, then i have a solution.
Just revert back to me.
---------- Post added at 01:17 PM ---------- Previous post was at 01:09 PM ----------
captain_nemo said:
Post to factory reset Micromax a1 has hard bricked. Its not turning on. not boot logo. Never rooted. Current OS Marshmallow. But whenever I connect it with laptop, Laptop is detecting and giving back a sound.
Can someone help here.
Click to expand...
Click to collapse
just flash lollipop and everything will be fine.
Just follow the steps here
IN SP TOOLS DO NOT SELECT "DOWNLOAD ONLY" OR "FORMAT"
ONLY SELECT FIRMWARE UPGRADE.

Raizen12465 said:
Seems like you posted this nine days ago.
Is your phone fixed?
If it isn't, then i have a solution.
Just revert back to me.
---------- Post added at 01:17 PM ---------- Previous post was at 01:09 PM ----------
just flash lollipop and everything will be fine.
Just follow the steps here
IN SP TOOLS DO NOT SELECT "DOWNLOAD ONLY" OR "FORMAT"
ONLY SELECT FIRMWARE UPGRADE.
Click to expand...
Click to collapse
Bro Ive Tried All Possible Ways My Phone Not Booting Up
I Cant Even Start My Phone So No Question Of Booting In FastBoot Mode,
its Good As Dead…!
Power Button Is OK As Was Flashing A Sprout 8GB Version Rom Unknowingly (Afterwards I Realised And Regretted)
I'm Out Of Warranty 1 Month Before (1year+1Month Passed)
I Tried Every Option & Combination On Sp Flash Tool Tried Manual Format Yesterday
But Of No Use…!
1) Tried "Download Only"
2) Gone To Format Section "Format Everything Except Bootloader" Then "Download Only"
3) Formated all + Download
ALL THESE SAYS DOWNLOAD SUCCESSFUL AND THAT "" Popups
Now,
4) Tried Firmware Upgrade (After Going To Format Tab And Format All Except Bootloader)
A Strange ERROR Pops Up "PMT Info"
I Researched That ERROR "PMT Info"
Its When Partition Value Storer File Has Been Altered By Chanhe In Partition Value
So The Solution Online Was Given To "Format All" -> Download Only Preloader -> Then Flash All The Files
So… In The End I Know
1)My Preloader Is Currupt
2)Power Button Is As Good As On A New Device
3)i Dont Have Knowledge About How To I Format "Preloader" By Manual Format Option In The Sp Flash Tool, To Remove That Currupt Preloader From The Phone And Insert A New One Using Sp Flash Tool
THANK YOU If You Guys Read so Far… Now You Know What I Know, And what I Dont Know So… Waiting Eagerly For Your Reply! Please Help Me Get Out Of This Situation!

Bro, you look like you're in deep ****!
Don't worry, we'll fix this.
If you read my previous post in this thread, i said not to use download only.
USE UPGRADE FIRMWARE.
don't go to format tab or anything. do not edit anything.
JUST GIVE THE SCATTER FILE, SELECT FIRMWARE UPGRADE AND HIT DOWNLOAD. DON'T CHANGE ANY SETTING
do that and if still not working try kitkat flash file here
try it and revert back

Raizen12465 said:
Bro, you look like you're in deep ****!
Don't worry, we'll fix this.
If you read my previous post in this thread, i said not to use download only.
USE UPGRADE FIRMWARE.
don't go to format tab or anything. do not edit anything.
JUST GIVE THE SCATTER FILE, SELECT FIRMWARE UPGRADE AND HIT DOWNLOAD. DON'T CHANGE ANY SETTING
do that and if still not working try kitkat flash file here
try it and revert back
Click to expand...
Click to collapse
So i Tried What You've Said (First With Lollipop And Then With KitKat)
When I Select Filmware Upgrade It Shows "PMT Info" (Something Like PMT Currupted)
So Is There Any Way Of Solving PMT Other Than Just "Firmware Upgrade" Cause Its Not Working…(Cause PMT Is Currupt)
BTW ThankYou For The Reply…

Sagar Kapasi said:
So i Tried What You've Said (First With Lollipop And Then With KitKat)
When I Select Filmware Upgrade It Shows "PMT Info" (Something Like PMT Currupted)
So Is There Any Way Of Solving PMT Other Than Just "Firmware Upgrade" Cause Its Not Working…(Cause PMT Is Currupt)
BTW ThankYou For The Reply…
Click to expand...
Click to collapse
OK so I understood you'r problem, and luckily I have a solution.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Stepwise, What you have to do:
STEP 1 :
In SP tools, on the top you have tabs like welcome, format, download, readback and memoryTest.
Step 2 :
In download tab select scatter file. ONLY SELECT. Then go to Format tab.
(Use only stock kitkat scatter file or lollipop doesn't matter. Only, it should be stock.)
Step 3 :
Here check the validation check box, and select auto format flash. Now click on START.
Step 4 :
Once completed, go to download tab and select Upgrade Firmware and hit download.
This should probably get your phone up and running.
Revert back if not.

Guys, I am almost having the same problem. My Canvas A1 worked fine for 11 months and now it is malfunctioning. The phone stops giving audio output sometimes and then I have to restart it to make it work. It even started to restart on its own. Last day, I tried to wipe the dalvik cache and did a factory reset and now my phone is stuck on the "Google animation". I have less time left for my warranty, so please reply fast. Do I need to flash stock 6.0 via stock recovery ?? I don't want to unlock bootloader or to root the device for as long as possible. Thanks for reading, waiting for your reply. :crying:

Raizen12465 said:
OK so I understood you'r problem, and luckily I have a solution.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Stepwise, What you have to do:
STEP 1 :
In SP tools, on the top you have tabs like welcome, format, download, readback and memoryTest.
Step 2 :
In download tab select scatter file. ONLY SELECT. Then go to Format tab.
(Use only stock kitkat scatter file or lollipop doesn't matter. Only, it should be stock.)
Step 3 :
Here check the validation check box, and select auto format flash. Now click on START.
Step 4 :
Once completed, go to download tab and select Upgrade Firmware and hit download.
This should probably get your phone up and running.
Revert back if not.
Click to expand...
Click to collapse
I am also having the same problem, i tried steps that you said but every time i get error in Firmware Upgrade that "failed to get pmt info"
see my THREAD suggest me to unbrick my android one: http://forum.xda-developers.com/canvas-a1/help/help-android-one-hard-bricked-unable-to-t3273603
Please Help Me Get Out Of This Situation in any way easy way, hard way i will try.

have you tried this..??
http://forum.xda-developers.com/android/general/how-to-install-stock-rom-bricked-t3126834

harkirat singhh said:
have you tried this..??
http://forum.xda-developers.com/android/general/how-to-install-stock-rom-bricked-t3126834
Click to expand...
Click to collapse
how can I
Fastboot method requires at least get into bootloader menu,
but my android one has hard bricked not any buttons working.:crying:

Huge problem

Hey,
I am running the exodus rom on my oneplus 3 and after todays update I got a huge problem. My screen fails to wake up, the phone works normal I think but the screen is just black..
How do I solve a problem like this?
I have tried turning it on and off again, it did not work

Fast And Pro said:
Hey,
I am running the exodus rom on my oneplus 3 and after todays update I got a huge problem. My screen fails to wake up, the phone works normal I think but the screen is just black..
How do I solve a problem like this?
I have tried turning it on and off again, it did not work
Click to expand...
Click to collapse
dirty flash?
may be clean flash will help

JumboMan said:
dirty flash?
may be clean flash will help
Click to expand...
Click to collapse
Idk what happend
but the screen works again but my phone is now bricked and the usual guides to unbrick do not work.
This is the status of my 1+3
Bootloader: unlocked and I can boot in the bootloader
my device is recognized by my pc
I cannot enter TWRP and I cant flash TWRP.
When I try to flash it CMD says that its flashed but I still cant boot in twrp, I get a random screen with md5 checksum and some fails.
Can someone help me?

Fast And Pro said:
Idk what happend
but the screen works again but my phone is now bricked and the usual guides to unbrick do not work.
This is the status of my 1+3
Bootloader: unlocked and I can boot in the bootloader
my device is recognized by my pc
I cannot enter TWRP and I cant flash TWRP.
When I try to flash it CMD says that its flashed but I still cant boot in twrp, I get a random screen with md5 checksum and some fails.
Can someone help me?
Click to expand...
Click to collapse
I don't have answer for question.
it looks like you have some serious problem with your phone.
may be some experienced user will help you.
I think you should approach Naman bhalla as he made guide to unbrick so he may know in detail

JumboMan said:
I don't have answer for question.
it looks like you have some serious problem with your phone.
may be some experienced user will help you.
I think you should approach Naman bhalla as he made guide to unbrick so he may know in detail
Click to expand...
Click to collapse
I found a fix on the forum and this explained what my problem was
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english

Fast And Pro said:
I found a fix on the forum and this explained what my problem was
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english
Click to expand...
Click to collapse
Its good.
Self help is best help

[HELP] Unbrick Huawei GR3 (TANGO) - TAG-L23

Guys: I need your understanding, experience, patience and HEEELP!!!
The history:
2 months ago, I bought a new HUAWEI GR3 (TANGO) TAG-L23. Processor = MT6753T
I tried to root it using KingoRoot. I Messed it up... Got a soft-brick: splash screen boot loop. At that moment, I still had access to Fastboot and Recovery mode (stock recovery).
After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3.
I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm.
Tired of searching a stock/custom firmware for GR3 TAG-L23, I decided to download and flash a GR3 TAG-L22 rom using TWRP.
Result = Messed it up again... this time worst... Hard-bricked I think: the phone didn't show any light, couldn't boot it again in any mode... Dead...
The only hope I had is that it is detected by Windows for about 10 seconds as MEDIATEK USB PORT (COMxx) where xx changes when I connect it from one USB port to another.
Since then, I tried almost every tutorial/video/solution/forum/website over the internet, tried almost every SP Flash tool version from v3.1224 to v5.1628, downloaded every scatter.txt for MT6753 processor, tried changing with/without battery option in SPFT, pressing every phone buttons combos, with no luck...
I always get the same error: S_FT_ENABLE_DRAM_FAIL (0xFC0)
Downloaded and installed almost every driver I found on internet: not overwritting them... I created a Virtual Machine, and test them separately using snapshots. Result = Same DRAM_FAIL error.
last week, got another HUAWEI GR3 TAG-L23, untouched, brand new...
I did the following with the new one:
Flashed TWRP recovery using fastboot commands = OK
Rooted it using SuperSU = OK
executed tons of ADB commands that found over the internet, to dump the partition table and stock rom using dd command = OK (I think... what I got is a bunch of files - system, lk, boot, logo, cache, frp, userdata, secro, recovery, nvdata, protect1 and 2, tee1 and 2, and so on).
Using the partition table information, edited one scatter.txt file for MT6753 and, one by one, adjusted the partition info (start and lenght). I did it because when using any downloaded scatter file, and selecting the files that I got from dd commands, SPFT showed error messages saying them were wrong. After editing it and loading the files that I got from the second phone, SPFT recognized them as good ones.
But.... I'm still getting the d...mn S_FT_ENABLE_DRAM_FAIL (0xFC0) error
Also tried to get a rom backup and scatter file from the second phone using MTK DROID ROOT & TOOLS v2.5.3 with no luck: it shows all phone information (except IMEIs), a green rectangle shows up, but... a weird message appears at right: "ERROR: TotalBytesPerChunk Not Found. Set Default Page/Spare=2048/64 !!!". Then I click on "BLOCKS MAP" button, a new window appears showing the partition info (that already got using adb command prompt) and "create scatter file" button is grayed out... And if I try to perform the backup, it starts fine, but ends with error, and no file is backed up...
Let me mention that I already read and googled the totalbytesperchunk error and the grayed out button stuff and tried all alternatives too, and nothing worked.
My work environment:
PC = Laptop With 8 GB RAM / Windows 10 pro x64
Virtual Machines: Windows 7 pro 32 bits, Windows XP 32 bits, Ubuntu 32 and 64 bits...
What else can I do?
How can I use the second, rooted and working phone to get a rom/firmware working dump? it is possible?
If someone decides to help me, let me know what do you need (dumped files, downloaded scatter.txt files, screenshots, whatever you need...)

COM## is a COM port. You can use a terminal program to directly interact with the device.
You are not completely bricked yet.
I do not have any further details to help you, but I can tell you there is still hope.
Connect the dead device to PC, load up a terminal app (if on windows, just load up the app named Terminal)
See where you can get with that.
good luck

Please Help cesarr4: my TAG-L23 bricked - Need your TWRP
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.

antonioroa said:
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.
Click to expand...
Click to collapse
I attached the recovery I'm currently using in the second GR3. I'm still looking forward the stock rom and a way to recover the first one... have u found a way to unbrick it?
Here you can find the recovery too: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-0-huawei-tag-l01-p8-t3433520

I have the same problem with kingroot, and cannot find TAG-L23 rom.
I sent my phone to huawei support and they said it's a board problem and need to replace, the cost is near to the phone's original price.... No way!
In clangsm web page there's a stock rom but you need to pay for vip membership.
Please help with this issue.

I'm still trying to get a working rom image from the 2nd GR3 that I bought... No luck yet... I'm plenty sure that there is no need to do hardware replacement... can anyone point me to a tool/step-by-step guide to readback and save a flashable rom image from GR3 phone, and a SP tools that works with GR3 chipset/PCB?

Hi, i have a TAG-L01 and i got the same problem, i've tried a lot with no lucky, it seems sp flash tool don't support our device(or is huawei that don't want).
If you have some ideas please tell me, i will help(our devices are exactly the same, all TAG-Lxx are the same)

Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.

srgg01 said:
Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.
Click to expand...
Click to collapse
Done. Where can I share it for you?

cesarr4 said:
Done. Where can I share it for you?
Click to expand...
Click to collapse
please share your ROM in google drive. i've got same problem here.

Any link to the TAG-L23 ROM? please share as I believe mine is corrupted.

Lenovo K8 Note Red State Bootloop After Flashing Custom Recovery

Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks

beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.

Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?

beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't

k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....

DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839

thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse

I have the same problem. please help us!

HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe

I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.

custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists

I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd

custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033

Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.

I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.

custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds

Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:

custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official

Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.

Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...

How To Guide Asus ROG Phone 6 / 6 Pro [ROOT GUIDE/SUP]

Hey, I have rooted a few of these and helped a few people as well and feel confident I can help most anyone with the problems they face rooting this beast. Also I'm posting this to have a place I can send people I help so I don't have to keep retyping stuff. From what I can tell the steps to root this phone are almost the same as the last model.
For now I will just post rough steps and use this as a place to provide support to people.
STEPS: (Rough guide/ please use other sources of information also)
1.) Fully update your phone
2.) Download the bootloader unlock app from asus official website. Also download and install Magisk. I recommend canary release.
3.) Get a patched boot.img or learn with a search engine how to extract the boot.img from payload.bin which can be found inside the large firmware zip files on the asus website (same link as unlock app but click firmware). Follow a tutorial.
4.) Turn on adb settings, and roboot into fastboot. adb reboot bootloader
For me for windows I needed to download fastboot drivers and go to device manager and install/update them.
5.) Unlock the bootloader with: fastboot flashing unlock
6.) Flash the patched boot image with: fastboot flash boot magisk_patched####.img
7.) Download safteynetfix and go to Magisk -> Modules and install safteynetfix.zip. Then go to Magisk -> Settings and enable Zygisk, and Enforce Denylist. Then turn on airplane mode and click on Configure deny list. add apps that are not working with root here, then delete their storage in App->Settings and reboot, remove airplane mode, and force close the apps in question.
For example select Show -> system apps. and add Google Play Store and Google play services to the deny list. Then go to App->Settings and delete both of those app's storage. Then when you reboot and remove airplane mode and force close google play and reopen it and go to Google Play -> Settings -> About you should see at the bottom "Device is certified".
If this last step does not show certified you did something wrong or I described it bad, check with a tutorial how to set up safteynet + configure deny list. Or post here and I will help you.
FINAL NOTE: After this the OTA updates that ASUS pushes will not be downloaded by our phone. We need to go to the same website we downloaded the unlock app from and we need to download the firmware files (WW for me) and put them in /sdcard/UL-ASUS-Al2201....zip and reboot. We then need to repeat the root process and the Magisk module process. Also I think we need to do this for every update along the way and cannot skip to the most recent update but not sure.

Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?

leathan said:
Hey, I have rooted a few of these and helped a few people as well and feel confident I can help most anyone with the problems they face rooting this beast. Also I'm posting this to have a place I can send people I help so I don't have to keep retyping stuff. From what I can tell the steps to root this phone are almost the same as the last model.
For now I will just post rough steps and use this as a place to provide support to people.
STEPS: (Rough guide/ please use other sources of information also)
1.) Fully update your phone
2.) Download the bootloader unlock app from asus official website. Also download and install Magisk. I recommend canary release.
3.) Get a patched boot.img or learn with a search engine how to extract the boot.img from payload.bin which can be found inside the large firmware zip files on the asus website (same link as unlock app but click firmware). Follow a tutorial.
4.) Turn on adb settings, and roboot into fastboot. adb reboot bootloader
For me for windows I needed to download fastboot drivers and go to device manager and install/update them.
5.) Unlock the bootloader with: fastboot flashing unlock
6.) Flash the patched boot image with: fastboot flash boot magisk_patched####.img
7.) Download safteynetfix and go to Magisk -> Modules and install safteynetfix.zip. Then go to Magisk -> Settings and enable Zygisk, and Enforce Denylist. Then turn on airplane mode and click on Configure deny list. add apps that are not working with root here, then delete their storage in App->Settings and reboot, remove airplane mode, and force close the apps in question.
For example select Show -> system apps. and add Google Play Store and Google play services to the deny list. Then go to App->Settings and delete both of those app's storage. Then when you reboot and remove airplane mode and force close google play and reopen it and go to Google Play -> Settings -> About you should see at the bottom "Device is certified".
If this last step does not show certified you did something wrong or I described it bad, check with a tutorial how to set up safteynet + configure deny list. Or post here and I will help you.
FINAL NOTE: After this the OTA updates that ASUS pushes will not be downloaded by our phone. We need to go to the same website we downloaded the unlock app from and we need to download the firmware files (WW for me) and put them in /sdcard/UL-ASUS-Al2201....zip and reboot. We then need to repeat the root process and the Magisk module process. Also I think we need to do this for every update along the way and cannot skip to the most recent update but not sure.
Click to expand...
Click to collapse
Sorry, I messed with the reply: it's my previous post.

fux1976 said:
Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?
Click to expand...
Click to collapse
I cant really help as I can't reproduce those problems. My phone was originally WW, but did you try to apply the non latest update? Then work your way up to 160?

fux1976 said:
Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?
Click to expand...
Click to collapse
To answer some other stuff, did you try looking in Device manager and maker sure your android device/asus rog is listed without an exclamation? I was having similar issues on windows until I installed the usb drivers. You should be able to run fastboot devices from within the bootloader menu.

leathan said:
I cant really help as I can't reproduce those problems. My phone was originally WW, but did you try to apply the non latest update? Then work your way up to 160?
Click to expand...
Click to collapse
Hi there! I flashed raw .134 and then the magisk patched boot .img as dedcribed in one forums guide, then tried to upgrade to .160 when I saw it on the asus support page. I was thinking of using edl and hard reset the phone and start again (in the next few days as it take times). I found a guide and tools (don't know if I can post the external link here). Do you think that could work? I downloaded raw .160 from the asus site (then i'll reflash the magisk patched boot).
To be honest it tickles me to try out this things (hoping not to end up with a brick of course)

leathan said:
I cant really help as I can't reproduce those problems. My phone was originally WW, but did you try to apply the non latest update? Then work your way up to 160?
Click to expand...
Click to collapse
Hi there! I flashed raw .134 and then the magisk patched boot .img as dedcribed in one forums guide, then tried to upgrade to .160 when I saw it on the asus support page. I was thinking of using edl and hard reset the phone and start again (in the next few days as it take times). I found a guide and tools (don't know if I can post the external link here). Do you think that could work? I downloaded raw .160 from the asus site (then i'll reflash the magisk patched boot).
To be honest it tickles me to try out this things (hoping not to end up with a brick of course
leathan said:
To answer some other stuff, did you try looking in Device manager and maker sure your android device/asus rog is listed without an exclamation? I was having similar issues on windows until I installed the usb drivers. You should be able to run fastboot devices from within the bootloader menu.
Click to expand...
Click to collapse
I fortunately have several pcs so i switched to the one with no drivers issues. As written I can only use fastboot commands when the phone is in fastbootd mode (sort of recover looking screen). The bootloader mode (one line, capital letters) is not recognized by pc..that's why I was thinking about EDL and reflashing the first level boot. Is it hazardous?

fux1976 said:
Hi there! I flashed raw .134 and then the magisk patched boot .img as dedcribed in one forums guide, then tried to upgrade to .160 when I saw it on the asus support page. I was thinking of using edl and hard reset the phone and start again (in the next few days as it take times). I found a guide and tools (don't know if I can post the external link here). Do you think that could work? I downloaded raw .160 from the asus site (then i'll reflash the magisk patched boot).
To be honest it tickles me to try out this things (hoping not to end up with a brick of course
I fortunately have several pcs so i switched to the one with no drivers issues. As written I can only use fastboot commands when the phone is in fastbootd mode (sort of recover looking screen). The bootloader mode (one line, capital letters) is not recognized by pc..that's why I was thinking about EDL and reflashing the first level boot. Is it hazardous?
Click to expand...
Click to collapse
I would continue to try to get my PC to recognize my Phone in bootloader mode using the drivers I linked. After helping 2 people who had windows, on both of their machines, I had to install the drives. On linux is just worked.
Also the raw image that I linked is of 93 so you should have needed to download 95, 97, 134, and 160 from asus. Then after 160 I repatched the boot img and re-rooted.
There is another person who said after tencent -> WW she was able to update to 134 where she had some problem. But I don't know how to reproduce that stuff Hope you figure it out though.

leathan said:
I would continue to try to get my PC to recognize my Phone in bootloader mode using the drivers I linked. After helping 2 people who had windows, on both of their machines, I had to install the drives. On linux is just worked.
Also the raw image that I linked is of 93 so you should have needed to download 95, 97, 134, and 160 from asus. Then after 160 I repatched the boot img and re-rooted.
There is another person who said after tencent -> WW she was able to update to 134 where she had some problem. But I don't know how to reproduce that stuff Hope you figure it out though.
Click to expand...
Click to collapse
Phone looks certified, country WW, safetynet passed and upgraded to .160. Only 2 problema left: voice dictation of GBoaed and Android auto not working.
I tried several ways but they didn't solve. Voice dictation worked and then stopped: I guess something interferes... Android Auto app crashes although phone connects to car and is recognised.
Very strange behaviour...
Do you have any idea on how to reflash last .160 zip without twrp? Once installed it gets ignored by system when saved in home directory...
Everything else is working properly.

Isn't Android Auto no more (i.e discontinued).....?

elmor0 said:
Isn't Android Auto no more (i.e discontinued).....?
Click to expand...
Click to collapse
what?!? where did you hear that? It'just something causing problems (compatibility issues with app or setting: magisk, modules, adaway, skipad, disabled system apps and so on). If I could manage to reflash the stock rom it'll work again (I hope)

fux1976 said:
Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?
Click to expand...
Click to collapse
Keep spamming flashall_aft.cmd until it works or try flashing other raw.
This worked for me if your able to get fastboot devices listed in adb firstly

finallau said:
Keep spamming flashall_aft.cmd until it works or try flashing other raw.
This worked for me if your able to get fastboot devices listed in adb firstly
Click to expand...
Click to collapse
I only have raw for .143 but I updated to .160*...can I use the previous version or do I get bricked? I don't trust anti roll back mechanism. I can live with this 2 "limitations" waiting for twrp and then be able to flash zip with no hassle.
*I downloaded source code from the Asus site but not sure how to use it (and unzipped is around 10 gb )

Thank you for this! I've been out of the root game for years but noticed with your post that I can hide root from Google Pay and my banking apps, so thinking of trying this. One question though - you mentioned that official updates need to be manually downloaded and the phone re-rooted. Would this wipe the phone each time?

fastboot driver doesnt support win64

Will the phone do a factory reset after unlocking the bootloader?

Anyone know if I root my phone following these instructions, will it factory reset or wipe my data partition? Sorry it's been a while since I rooted any phone, and I am excited about going this route

MrKioFLow said:
Anyone know if I root my phone following these instructions, will it factory reset or wipe my data partition? Sorry it's been a while since I rooted any phone, and I am excited about going this route
Click to expand...
Click to collapse
Yes, if you unlock the bootloader using the bootloader unlock app (which is a step that is missing in the original post), your phone will perform factory reset.

Troubleshooting​
Once you boot into the bootloader with the adb reboot bootloader command, stay on the screen with the green START. Do not navigate to the fastbootd.
Use the side USB port to connect to your computer - not the bottom one.
Run the adb and fastboot commands in Command Prompt as Administrator.
Before you reboot into bootloader, remove Lock screen in Settings.
If you execute fastboot flashing unlock and you got FAILED (remote: 'permission denied'), just ignore it.
It's always better to install the latest updates, then download the firmware to your PC from ASUS Webpage and extract the boot.img and patch it in Magisk in the phone using this tutorial.

Thanks for the guide! Should add that you have to use the side port for fastboot to see the device. Was stuck for a while trying to figure out why neither mac nor pc couldn't find it when it was in bootloader mode - it was because I was using the bottom port lol!
Also if you want to disable verity and verification for the verified boot images, you have to do for both vbmeta.img and vbmeta_system.img. Didn't boot for me until I did that, and had to do an additional factory reset from recovery because of this.