Just got an OTA update for my F926B, EUY Version with: - One UI 4.1
- March Patch
Nothing on EUX. Probably be another 2 weeks for EUX.
Batfink33 said:
Nothing on EUX. Probably be another 2 weeks for EUX.
Click to expand...
Click to collapse
Eux and euy are the same oxm image, the February update was faster in eux and now again on euy.
I downloaded ans installed it through Odin.
whatwhatster said:
Eux and euy are the same oxm image, the February update was faster in eux and now again on euy.
I downloaded ans installed it through Odin.
Click to expand...
Click to collapse
I was just about to ask about this. I'm downloading from sammobile right now.
-snip-
I notice smart widgets aren't there. I thought they were a feature of 4.1?
Related
Thought i should give you a headsup guys, PIE IS OUT on SER csc.
I made a mirror to Google Drive for faster download
A730FXXU4CSB9/A730FOXM4CSB9/A730FXXU4CSB7/A730FXXU4CSB9
Available CSC codes:
CAC - Uzbekistan
CHO - Chile
COO - Colombia
CPW - United Kingdom (Carphone Warehouse)
DBT - Germany
EON - Trinidad and Tobago
SEK - Ukraine (Kyivstar)
SER - Russia
SKZ - Kazakhstan
TPA - Panama
TTT - Trinidad and Tobago
XEO - Poland
ZTO - Brazil
*if you are not in one of these countries it will automatically set itself to SER - Russia
Read carefully the entire post. I am not responsable for anything you do with your device.
Prerequisites:
download Odin v3.13.1
download and install Samsung Drivers (if you have them installed you can skip this step)
download FW zip
Instructions:
DO NOTE ALL YOUR DATA WILL PROBABLY BE DELETED INCLUDING INTERNAL SDCARD, USE SMARTSWITCH TO BACKUP EVERYTHING BEFORE FLASHING!!!
Switch off the phone
Use Volume Up+Volume Down+Power to enter Download Mode and connect the device to usb
Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
Put each file from unpacked zip into appropriate tab (for csc use HOME_CSC)
Click Start
Allow the flash procedure to finish, it will automatically reboot.
Download:
https://drive.google.com/open?id=1Uezab0lNDEc1nDF12uN8MtKmXVrq55PC
https://mega.nz/#!zwY1WChS!po0o0UZXbvlk9ay2kQTkx3MQMXwM97zS0RyqWYBTJNk
Happy flashing!!
Other links:
How to install TWRP (RMM info) - https://forum.xda-developers.com/ga...de-root-install-twrp-samsung-january-t3760991
PIE RMM - https://forum.xda-developers.com/sa...all-twrp-samsung-t3747535/page48#post78966561
Official TWRP fully compatible with PIE - https://forum.xda-developers.com/ga...recovery-twrp-3-2-2-0-galaxy-a8-2018-t3818204
Wow sir tanks
Good work Corsi
im from India, Can i able to install it?
corsicanu said:
Other links:
How to install TWRP (RMM info) - https://forum.xda-developers.com/ga...de-root-install-twrp-samsung-january-t3760991
PIE RMM - https://forum.xda-developers.com/sa...all-twrp-samsung-t3747535/page48#post78966561
Official TWRP fully compatible with PIE - https://forum.xda-developers.com/ga...recovery-twrp-3-2-2-0-galaxy-a8-2018-t3818204
Click to expand...
Click to collapse
Can you please confirm is with One UI ? Because I remember I've red it will be Samsung Experience, not One UI.
Screenshots if possible?
If you are wanting to get pie good but it this time I don't think twrp Support pie.
Last twrp update was in 2018 and none of updates on it mentions supporting pie rooting likely will not work until twrp is updated.
mchlbenner said:
If you are wanting to get pie good but it this time I don't think twrp Support pie.
Last twrp update was in 2018 and none of updates on it mentions supporting pie rooting likely will not work until twrp is updated.
Click to expand...
Click to collapse
TWRP is fully compatible, trust me on this, i maintain TWRP for 5 devices from which 3 got official pie and works without issues, 2 more to get and i tested on my A5 2017 and everything works.
corsicanu said:
TWRP is fully compatible, trust me on this, i maintain TWRP for 5 devices from which 3 got official pie and works without issues, 2 more to get and i tested on my A5 2017 and everything works.
Click to expand...
Click to collapse
This is good to hear.
Added a Mega mirror too since Google Drive has limited traffic.
Happy flashing!
Rur0uniX said:
Can you please confirm is with One UI ? Because I remember I've red it will be Samsung Experience, not One UI.
Screenshots if possible?
Click to expand...
Click to collapse
I Installed it on Yesterday. it is with One UI...
Vo LTE Not Working In India.
hi anyone provide a list of features which come in this phone after pie update specially with camera
Hi and thank you for sharing. I have galaxy A8+ with csc of United Arab Emirates (XSG). Is there any problem if l flash this firmware of russia country, will it give a bootloop to my phone?
Thank you if you answer and for sharing!
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
imdeiv said:
I Installed it on Yesterday. it is with One UI...
Vo LTE Not Working In India.
Click to expand...
Click to collapse
Can we flash it if we have devices that have different csc that mentioned on the post? I have A8+ with csc of United Arab Emirates (XSG).
imdeiv said:
I Installed it on Yesterday. it is with One UI...
Vo LTE Not Working In India.
Click to expand...
Click to collapse
You need to wait India csc not supported in this build
How is the camera ?
where do I take "SEK - Ukraine (Kyivstar)" ?
can't find it in zip
Yu-Ra said:
where do I take "SEK - Ukraine (Kyivstar)" ?
can't find it in zip
Click to expand...
Click to collapse
The said region "SEK - Ukraine (Kyivstar)" is part of the multi-OXM CSC firmware linked in the first post. You do not have to do anything special. Simply flash it using Odin (Refer to the instructions in the OP).
DJBhardwaj said:
The said region "SEK - Ukraine (Kyivstar)" is part of the multi-OXM CSC firmware linked in the first post. You do not have to do anything special. Simply flash it using Odin (Refer to the instructions in the OP).
Click to expand...
Click to collapse
What would happen if l flash the rom to my A8+ which has dhe csc of United Arab Emirates (XSG csc)?
Hey guys.After the update my phone's media voume is only at medium level even after setting it at maximum volume. Is there any fix for it?
Taulant Datja said:
What would happen if l flash the rom to my A8+ which has dhe csc of United Arab Emirates (XSG csc)?
Click to expand...
Click to collapse
No advised, the XSG is not part of the multi-OXM CSC. Re-read the first post for what would happen. :good:
Vikranth.1 said:
Hey guys.After the update my phone's media voume is only at medium level even after setting it at maximum volume. Is there any fix for it?
Click to expand...
Click to collapse
Updated without wiping?
Has anyone been able to install Twrp successfully after flashing this rom?
I keep failing at it even after following all the guides.
KG STATE:CHECKING in download mode.
Sent from my SM-A730F using Tapatalk
Hello, since a manual firmware update from Sammobile for my SM-G9860, I have not received any more security updates. Likewise, information on the firmware is no longer available?
I have loaded the following firmware
https://www.sammobile.com/samsung/g...e/SM-G9860/CHC/download/G9860ZCU2BTH6/364050/
Security patch level is August 1, 2020
The September update is not loaded.
2. What is the difference between the firmware, maybe it is because of that ?:
csc: G9860OZL2BTH6
CSC: G9860ZAC2BTH6
Thank you
Well the September security patch hasn't been released for SM-G9860 yet and we are already in October.
stefan243546 said:
Well the September security patch hasn't been released for SM-G9860 yet and we are already in October.
Click to expand...
Click to collapse
try with the HogKong firmware TGY
G9860ZHU2BTH6
https://samfw.com/firmware/SM-G9860/TGY/G9860ZHU2BTH6
stefano alegnini said:
try with the HogKong firmware TGY
G9860ZHU2BTH6
https://samfw.com/firmware/SM-G9860/TGY/G9860ZHU2BTH6
Click to expand...
Click to collapse
I have TGY but there is no september patch update. As you can see on sammobile https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G9860 .
ok, thank you. Im waiting for Oktober Update.
我的设备是SM-G988U。我没有收到来自OneUI 3.1的更新。我朋友的G988N已收到OneUI 3.1的更新
Translation: My device is SM-G988U. I did not receive the update from OneUI 3.1. My friend's G988N has received the update of OneUI 3.1
thank you
I have an ATT G988U 1CTLB now, and I see G988U 1DUB5 out there... will flashing to that give me 3.1?
I have an unlocked/unbranded S20 5G G981U1 bought from Google Fi, it's OYM, XAA, got all the updates installed the normal way through the phone. I just installed Smart Switch on my PC and connected it to the phone and it detected an update. It shows my phone currently has PDA: UA2, CSC: UA2, PHONE: UA2 (XAA), and it says latest software version is UB7 for all 3 of those, 5,682 MB update. It's downloading now, hopefully this is One UI 3.1!
It gave this website but maybe it's not updated yet with the changelog: https://www.sammobile.com/samsung/galaxy-s20/firmware/SM-G981U1/SPR/download/G981U1UES1CTL5/1108696/
EDIT: WOOOOO it updated to One UI 3.1, has March 1, 2021 security update too!!!!
nxt said:
I have an unlocked/unbranded S20 5G G981U1 bought from Google Fi, it's OYM, XAA, got all the updates installed the normal way through the phone. I just installed Smart Switch on my PC and connected it to the phone and it detected an update. It shows my phone currently has PDA: UA2, CSC: UA2, PHONE: UA2 (XAA), and it says latest software version is UB7 for all 3 of those, 5,682 MB update. It's downloading now, hopefully this is One UI 3.1!
It gave this website but maybe it's not updated yet with the changelog: https://www.sammobile.com/samsung/galaxy-s20/firmware/SM-G981U1/SPR/download/G981U1UES1CTL5/1108696/
EDIT: WOOOOO it updated to One UI 3.1, has March 1, 2021 security update too!!!!
Click to expand...
Click to collapse
good job!
AT&T is pushing out the update for s20+
2 days ago. I have the U1 software installed on the Canadian W series.
Anyone with esim enabled with the new update ?
Stable update now live for Beta program users in India
Hopefully we get the links for the full version and I can install through Odin.
enjoylife1788 said:
Hopefully we get the links for the full version and I can install through Odin
Click to expand...
Click to collapse
This one seems to be only for Beta testers as it is just around 300 MB . They should be pushing a stable build for non beta testers soon .
In EU (netherlands/germany) they say november full srable version will come. I also will sideload (and root) the rom trough Odin.
A later build, BVK5, is now rolling out to all users in South Korea on their Fold4, F936N, and Flip4, F721N, devices.
See... https://www.gsmarena.com/samsung_ga...able_one_ui_50_with_android_13-news-56567.php
What is the difference between SM-F936N (Korea) and SM-F936B version. When I had note 20 ultra, there was one version and I could flash KOO CSC files on my Indian note ultra.
In this case I don't think I can do that.
Galaxy Z Fold 4 gets stable Android 13 (One UI 5.0) update in India
Over the past week, Samsung released the stable Android 13 update to the Galaxy Z Fold 4 in South Korea ...
www.sammobile.com
@enjoylife1788
You can download it, using SamFirm or Frija, model SM-F936B, CSC INS, which is part of OXM multi-CSC. This includes all of Europe, I think most of Asia. Full Firmware, official, signed.
Flashed it on an EUX or EUY Fold 4 using ODIN without problems, as it is part of the same multi-CSC OXM. Remember to use HOME_CSC for CSC file to keep your data.
Is VK3 stable or BETA ?
elio321 said:
Is VK3 stable or BETA ?
Click to expand...
Click to collapse
Stable
elio321 said:
Is VK3 stable or BETA ?
Click to expand...
Click to collapse
ZVK3 = Beta
BVK3 = Stable
Stable Android 13 One UI 5.0 has gained pace by rolling out to the following countries and CSC codes...
Philippines (XTC)
Malaysia (XME)
Thailand (THL)
Philippines (GLB)
Indonesia (XID)
What about USA versions?
corwin_amber said:
@enjoylife1788
You can download it, using SamFirm or Frija, model SM-F936B, CSC INS, which is part of OXM multi-CSC. This includes all of Europe, I think most of Asia. Full Firmware, official, signed.
Flashed it on an EUX or EUY Fold 4 using ODIN without problems, as it is part of the same multi-CSC OXM. Remember to use HOME_CSC for CSC file to keep your data.
Click to expand...
Click to collapse
Yes thats what I did. Thanks.
ITMASTER said:
What about USA versions?
Click to expand...
Click to collapse
U.S. Beta Testers received the stable BVK3 11 Nov. See...
Looks like beta BVK3 is officially Android 13 - Android Forums at AndroidCentral.com
Downloading now349793 Sent from my SM-F936U1 using AC Forums mobile app
forums.androidcentral.com
[email protected] said:
U.S. Beta Testers received the stable BVK3 11 Nov. See...
Looks like beta BVK3 is officially Android 13 - Android Forums at AndroidCentral.com
Downloading now349793 Sent from my SM-F936U1 using AC Forums mobile app
forums.androidcentral.com
Click to expand...
Click to collapse
What about the others that not a part of Beta program? When we get this )
Sammobile release android 13 for the model SM-F936B Panama Country, it works perfectly in Costa Rica
any update for December patch on Fold4
guyluvsgals said:
any update for December patch on Fold4
Click to expand...
Click to collapse
India, CSCS code INS, is still on the BVK3 release with the November security patch.
Hi, does anyone know why F936U1 with XAA keeps pulling up S(Android 12)? I had to flash to F936U with TMB, but now I'm subjected to the bloat and missing the extra malware scans my unlocked phone had before. Also for some reason F936U doesn't let me download updates with XAA? Basically trying to get my good unlocked firmware back but it seems like F936U1 doesn't have the latest update?
iCuiD said:
Hi, does anyone know why F936U1 with XAA keeps pulling up S(Android 12)?
Click to expand...
Click to collapse
Unlike the international model, F936B, Android 13 has not been rolled out for the F936U1 variant yet. See...
https://samfrew.com/model/SM-F936U1/