any one has idea that how i got my phone the unknown baseband. " my phone was in 9008 mode due to rooting & using chinese app which moved my phone to 9008 mode automatically & no way to come back from that hell zone (9008) because it needed an mi auth to flash the whole firmware. really xiaomi ? it should be my phone & with my mi account i should be able to flash but these jerk company wanted to make bucks for their server too. anyway, i flashed with the auth account from some tool & after it my baseband was unknown. what was the reason ? i just upgraded my firmware & that's it. also, i haven't done any efs clear ? anyway to get that baseband back. i tried rooting & diag mode it doesn't work ? i tried the reverse eng firmware but for this model may be it was wrong because after flashing it with eng firmware phone keep rebooting.
Related
Hi,
I have a problem with my LG G3. The phone shows the well known message "Current version is not available for user. Can't find matched cust for NT-code mcc/mnc[], subset[]". If I insert SIM, the phone won't connect to any network.
This is how it happened:
I bought the phone form Aliexpress as refurbished. It came with Android 4.4. It could not find any update for my ROM. So I decided to root it and install CM13. But during the rooting process the phone got hard bricked. I had to follow the guide with shorting pins and Qualcomm driver to restore the phone. Unfortunately I didn't have the original ROM. So I flashed files from LGD855AT-00-V10e-EUR TOT. Then I was at least able to get to download mode and flashed a European Lollipop ROM with LGUP.
Since then I'm getting this error message no matter which ROM I tried. According to IMEI the phone location code is A6GBTN. So I even tried to install a UK ROM without any success.
I think the fault might be caused by the fact that during unbricking I flashed also do misc.img partition. And now the data in it don't match with my phone. Is it possible? What should I try?
Thank you.
Hello,
I have a lg g4 815h bought from ebay India and using in India for a few months back...it was working fine till yesterday. A pop up was coming for a system update since 1 month so I decided to perform the update ...so I allowed the update but as soon the phone rebooted and the android sign came it showed error.
After 5 mins nothing happned so i restarted the device it booted but since then the camera is is not working says unfortunately camera has stopped ,even my phone call pick up screen is not showing when there is a call to answer...
I can call some one but cannot end the call due to no calling screen is appearing.
I did hard reset but the situation is same...
Should I flash using lg flash tool ?any version works on windows xp?I only have a windows xp Pc...
Or please provide a solution which can be performed using recovery like twrp...
Please help...
Thanks in advance
If any advices to flash my device using twrp please also suggest me a simple and stable rom
file...
Thanks
Kind Regards
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
ur phone is REFURBISED?
karan5567 said:
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
Click to expand...
Click to collapse
open phone . take out mother board .. and read plaque model. if sprint flash sprint KDZ and LGUP. if H815 then do that .. thats the only way to be sure.
U have a refurbished model.Go to nearest mobile repair shop & take out your motherboard to see what model no is written on this.Then flash a rom accoringly. Don't flash any other rom just by assuming else you will brick your device.
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Any chance to root the phone and install twrp?
Then flash a custom rom?
Please help...
karan5567 said:
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Click to expand...
Click to collapse
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
asingha94 said:
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
Click to expand...
Click to collapse
Thanks for your reply...
Your network is locked?
You cant unlock it?
Can we degrade our Os to lollipop to get root?
Even I cant turn on the Enable OEM unlock under the developer mode...
Any more advices?
Please help.....
I have tried almost all h815 ans ls991 roms with all flashing methods but still unable to successfully flash my device...lg tot flash tool always show dl error after 4 to 6 percent of flashing...
Please help
Any idea's?
Pick the phone, and send it to the place where you bought it. If you have warranty the repair is free, if not, then you must pay sadly.
Still no solution, I even cannot enable OEM unlock under developer options...
It automatically disables it...
Please help
Just experienced this issue after changing sim card... Call and Camera stopped working over and over again.
How I solved it: Go to the specific app that is causing you trouble, and clear cache/files (too bad I only found this after 3 factory resets).
Maybe it will help ... LG G4 CAM
I have a Samsung Note 8 inch. Tablet. 2012 model.
N5100 INU version
The original Motherboard got corrupted so i installed a new motherboard Ordered it from China / AliExpress.
As soon as I installed the new MotherBoard everything works fine. /
UPDATED Info
It was with Custom Firmware / CHINA Official . but device Status was Custom, I did not try to load Chrome/ GoogleFrameWorkServices APK. On this firmware which came with the mother board, but i did see some info about that.
The issue is they ship with China Firmware
I need STOCK INU firmware on this. Or any English firmware.
I download the N5100 INU Firmware I allso tried ODIN
I also tried SmartSwitch
I also tried Kies UPDATE / Initialization nothing has been working.
ODIN gives "failed to write / complete error"
SmartSwitch unable to connect unsupported device
Kies same error
I also tried to update/ initialize but the issue is after download 2 or 3 hour of Firmware it goes to 0% and says "failed to update" try to use recovery mode from abother compbuter and ask for recovery CODE.
I know i am missing some thing very small.
I checked the Device is not ROOTED
I see ODIN mode
Binary: Samsung Official
Device Status Custom
Custom Binary Download: NO
Maybe it is locked or something.
IDK
2nd issue
When smart Switch Ask for model and serial
I had 2 or 3 times put the Indian MotherBoard Serial Number
And it had Failed.
Now i am trying to Do this with China MotherBoard Serial Number.
If this time it succeeds i will be happy to inform you.
But this will still only load the Official China FirmWARE for CSC CHN
Anyways After this Maybe i will try ODIN
Since once it will have china official firmware
then it will have India ODN firmware via ODIN
But I could also go into a bad State here..
If the china guys sent me the motherboard with custom firmware which will support all india sim cards and etc. And now if i complete this official china firmware. I might get locked out !!
Dam i dont know what will happen and how i will solve this.
The ONLY solution someone has suggested who bought this same mother board and did it.
Said that " you need to make IMG of the original Country Firmware built into the Odin file and you also need all the files BL / CSC / PD etc.
I want HELP thanks
UPDATE:
Ok entering the China MotherBoard Serial Number smartSwitch installed the original China firmware back.
And now the Device status became
Official too.
That's 1 step ahead or backward idk.
So now I need to install India firmware via ODIN.
I assume if i use SmartSwitch and put Indian motherboard serial and after 2 or 3 hours of download it will not upgrade since it will try to match the serial number.
Anyways I just tired ODIN and it does not work. Same error
Complete (write) operation failed.
Any help please
So FINAL:
I am stuck with Original Official CHN / China Samsung Firmware on this n5100 And I cant do anything
GOOGLE Youtube / GMAIL / Play Store / ETC.
Question:
Is there a way I can load a Multi CSC Firmware 1st which will load VIA ODIN and then Once this is LOADED
I can load INU INDIA firmware ?
I dont know what is the CLASH
Where is the CLASH and CONFLICT hapening for ODIN not working
Thanks Please REPLY HELP ASAP
SideQ
Is there any Custom Firmware which I can load and be happy
Marshmallow ? Nougat ?
All features working :
GPS /
Camera/
WIFI
SIM Card
Network
Bluetooth
No errors ?
Thank you
I will still prefer a Stock ROM
hello please help me...
https://forum.xda-developers.com/galaxy-note-8-0/help/n5100-motherboard-china-csc-chn-help-t3659722
Reply to this topic..
Some one on the Aliexpress site told in review of the mother board that he installed your
http://www.theandroidsoul.com/samsu...n5100-wifi-philz-touch-advanced-cwm-recovery/
and then ... Install
CivZ-FlexNote8.0_KK-Rev2.1-N5100_signed
I need to install INU n5100 Firmware and Change CSC to INU
installed this... i dont know what that will do or help but can u please reply to my POST up there.
Thanks
Hello i have Global Device 6/128 GB unlocked.
i Successfull flashed xiaomi.eu_multi_MIMAX3_9.7.4_v10-9 Weekly and then i make full BACKUP with TWRP.
All just run fine.
Then i Updated via TWRP c...
Theni testet Ressurection Kernel 6.
After that i cannot use Fingerprint anymore.And cannot delet the Fingerprints that i learned with Phone.
Wiping Cache and Dalvik also didnt Help.
So i thoght its because the Kernel.
So i Dirty flashed again xiaomi.eu_multi_MIMAX3_9.8.1_v10-9 .
After tha the password of my phone didnt match.So i Make full WIPE of my Device "YES" in TWRP. FORMAT DATA.
Then i tryed to Restoere my Backup wich was make with TWRP.But it always Hangs on "SYSTEM Image" and FAILS.
So i tryed to make a new Install with xiaomi.eu_multi_MIMAX3_9.8.1_v10-9.
It boots and i can Use it but my IMEIs from SLOT1 and SLOT2 are "0" ...No imei.
Also it shows no Baseband and no Bluetooth Address.
MAc Adress is Present.
So i searched Internet that i have to restore the EFS Partition.
I done zthis but Imei is again not showing.
Is my Phone now bricked or is there a chance to get my imei back ?
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
mierlo420 said:
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
Click to expand...
Click to collapse
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
majo3000 said:
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
Click to expand...
Click to collapse
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
eliaztheone said:
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
Click to expand...
Click to collapse
this doesnt HELP.
I tryed it in TWRP
But again no EMEI Present after reboot =(
NEED QCN FIle.
After a long search i think i have to do this tutorial.But i need help !
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
I need a ".qcn" Backup File from another MiMax3 and the "imei" wich belongs to that backup and Phone from another Person.
if have this i can search the "Imei" in backup File and can Add my "IMEI" wich is present on my Phonepacking.
If someone can help me that would be very wonderfull. But better help me on "PN" ....
Tryed really all things.... i think that would help.
Things i tryed : Flash Modem , Flash Firmware , MIflash (fllashall),flash Persist ....and so on.....
Hope someone can help me
Mismo problema
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
kacike69 said:
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Click to expand...
Click to collapse
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
majo3000 said:
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
Click to expand...
Click to collapse
I am in the same boat! exact same situation, did you manage to ever solve this?
I bought a redmi 9 (lancelot) in November. After unboxing I came to know that it has google dialer and messenger instead of mi messenger and dialer as it was a global variant. I went through different forums and found out that only indian roms have mi messenger and dialer so I decided to flash my phone with an Indian rom. first of all I unlocked its bootloader via official xiaomi unlock tool. it took 7 days. After that I flash my phone in fastboot mode with a miss matched file it was "cattails" file. I didn't knew about its codename yet (and yes that was the stupid part where I kept continue my try to flash the phone ) .
somehow phone flashed successfully but it never rebooted after flash and gone dead. now its only showing mtk port and I am unable to flash its factory firmware. how can this problem be solved now please guide me.
I don't want to visit customer care center again as they told me to replace its motherboard as they do not have authorized mi account to flash the phone.
Haidershah907 said:
I bought a redmi 9 (lancelot) in November. After unboxing I came to know that it has google dialer and messenger instead of mi messenger and dialer as it was a global variant. I went through different forums and found out that only indian roms have mi messenger and dialer so I decided to flash my phone with an Indian rom. first of all I unlocked its bootloader via official xiaomi unlock tool. it took 7 days. After that I flash my phone in fastboot mode with a miss matched file it was "cattails" file. I didn't knew about its codename yet (and yes that was the stupid part where I kept continue my try to flash the phone ) .
somehow phone flashed successfully but it never rebooted after flash and gone dead. now its only showing mtk port and I am unable to flash its factory firmware. how can this problem be solved now please guide me.
I don't want to visit customer care center again as they told me to replace its motherboard as they do not have authorized mi account to flash the phone.
Click to expand...
Click to collapse
So sad to hear that maybe ur device is bricked u must go to service center and not do anything else Or else ur motherboard might get damaged thank u