Related
Hello there
This is a surprise, but software able to flash the phone without any computer intervention was already on it, since the beginning.
Searching for a way to install my future lag fix easily, I remember that there was an "OTA" boot mode.
I know, today nobody saw an OTA on any Galaxy S smartpone (except maybe One on the AT&T Captivate?), but the software is still there.
How does this work :
Basically Linux boots a ramdisk, loading kernel modules and running an init process who start the whole Android experience (bootmode=) or just the recovery mode (bootmode=2).
Other bootmodes are used for battery loading only and Over The Air updates.
In this case, init.rc ask init to start "/sbin/redbend_ua all".
By default this software search for software updates in /data/fota and on similar places in the /sdcard.
It could prove useful another day, but you still have to be root to ask your device to reboot in a specific bootmode
The nice part is that we can use redbend_ua manually too, to do many impossible things before :
command list, pretty comprehensive.
Code:
img [partition name] [delta file] [device node] [temp path]
fs [partition name] [delta file] [mount point] [temp path]
all
dump <source dev> <dest file>
restore <source file> <dest dev>
compare <dev1> <dev2>
png [png file name]
all
Possible usages :
- Flashing the kernel without Odin or any computer
- Backuping and Restoring a whole firmware, including stock one
- Doing more than one operation before automatic reboot through a list of commands in /data/fota/command (not tested yet)
- Messing with bootloaders and bricking your phone for good
Yeah, you must be really carefull this time. Samsung made some partitions read-only for a reason
Hopefully this new tool will be used by most ROM cooker, CyanogenMod, and ClockWorkMod
I'll make a update.zip + redbend_ua template soon if nobody comes up with one.
My Twitter for next news
Joined to this post : redbend_ua working binary. (some firmware ship a new binary that does not accept command line parameters)
-----
Old post, for the record :
Our Galaxy S in Eclair firmwares come with software able to provide update Over The Air.
This firmware is in /sbin directory, which means that it's in the kernel ramdisk.
Look at the output when running the binary without argument or appropriate file:
Code:
# redbend_ua
RedBend Update Agent 6,1,14,1
FOTA : Make Block Device Nodes
UA/(MakeBMLNodes): mknod path=/dev/block/bml4, dev_no=35076
UA/(MakeBMLNodes): mknod path=/dev/block/bml5, dev_no=35077
UA/(MakeBMLNodes): mknod path=/dev/block/bml7, dev_no=35079
UA/(MakeBMLNodes): mknod path=/dev/block/bml8, dev_no=35080
UA/(MakeBMLNodes): mknod path=/dev/block/bml11, dev_no=35083
lcd_init(498): start!
lcd_init(507): fb0 open success
lcd_init(514): width = 480, height = 800
UA/ check_existence: /data/fota/delta.Sbl
UA/(update_all): Check Delta : path_idx(0), part_idx(0), file_path((null)), cnt(0)
UA/ check_existence: /data/fota/delta.zImage
UA/(update_all): Check Delta : path_idx(0), part_idx(1), file_path((null)), cnt(0)
UA/ check_existence: /data/fota/delta.modem
UA/(update_all): Check Delta : path_idx(0), part_idx(2), file_path((null)), cnt(0)
UA/ check_existence: /data/fota/delta.platform
UA/(update_all): Check Delta : path_idx(0), part_idx(3), file_path((null)), cnt(0)
UA/ check_existence: /sdcard/Android/data/temp.fota.delta/delta.Sbl
UA/(update_all): Check Delta : path_idx(1), part_idx(0), file_path((null)), cnt(0)
UA/ check_existence: /sdcard/Android/data/temp.fota.delta/delta.zImage
UA/(update_all): Check Delta : path_idx(1), part_idx(1), file_path((null)), cnt(0)
UA/ check_existence: /sdcard/Android/data/temp.fota.delta/delta.modem
UA/(update_all): Check Delta : path_idx(1), part_idx(2), file_path((null)), cnt(0)
UA/ check_existence: /sdcard/Android/data/temp.fota.delta/delta.platform
UA/(update_all): Check Delta : path_idx(1), part_idx(3), file_path((null)), cnt(0)
fail!
Open /data/fota/fota.status
fsync after write: 0
And here is the result when you provide a fake zImage delta file:
Code:
RedBend Update Agent 6,1,14,1
FOTA : Make Block Device Nodes
UA/(MakeBMLNodes): mknod path=/dev/block/bml4, dev_no=35076
UA/(MakeBMLNodes): mknod path=/dev/block/bml5, dev_no=35077
UA/(MakeBMLNodes): mknod path=/dev/block/bml7, dev_no=35079
UA/(MakeBMLNodes): mknod path=/dev/block/bml8, dev_no=35080
UA/(MakeBMLNodes): mknod path=/dev/block/bml11, dev_no=35083
lcd_init(498): start!
lcd_init(507): fb0 open success
lcd_init(514): width = 480, height = 800
UA/ check_existence: /data/fota/delta.Sbl
UA/(update_all): Check Delta : path_idx(0), part_idx(0), file_path((null)), cnt(0)
UA/(update_all): Check Delta : path_idx(0), part_idx(1), file_path(/data/fota/delta.zImage), cnt(1)
UA/(update_all): Check Delta : path_idx(0), part_idx(1), file_path(/data/fota/delta.zImage), cnt(1)
UA/ check_existence: /data/fota/delta.modem
UA/(update_all): Check Delta : path_idx(0), part_idx(2), file_path((null)), cnt(1)
UA/ check_existence: /data/fota/delta.platform
UA/(update_all): Check Delta : path_idx(0), part_idx(3), file_path((null)), cnt(1)
page_msize: 4096, phy_unit_size: 262144
UA/ Sbl delta does NOT exist! Skip.
page_msize: 4096, phy_unit_size: 262144
UA/ check_existence: /data/fota/fota_zImage
page_msize: 4096, phy_unit_size: 262144
dev: /dev/block/bml8 partition size: 0x780000
40180008: ffff ffff ffff ffff ffff ffff ffff ffff ................
40180018: ffff ffff ffff ffff ffff ffff ffff ffff ................
40180028: ffff ffff ffff ffff ffff ffff ffff ffff ................
40180038: ffff ffff ffff ffff ffff ffff ffff ffff ................
signature: 0xffffffff
page_msize: 4096, phy_unit_size: 262144
common mark dev : /dev/block/bml8 partition size: 0x780000
0xffffffff
page_msize: 4096, phy_unit_size: 262144
page_msize: 4096, phy_unit_size: 262144
UA/(backup_devbml) src: /dev/block/bml7 partition size: 0x780000
UA/(backup_devbml) dst: /dev/block/bml8 partition size: 0x780000
UA/(backup_devbml) backup 128KB at 0x0
UA/(backup_devbml) backup 128KB at 0x40000
UA/(backup_devbml) backup 128KB at 0x80000
UA/(backup_devbml) backup 128KB at 0xc0000
UA/(backup_devbml) backup 128KB at 0x100000
UA/(backup_devbml) backup 128KB at 0x140000
UA/(backup_devbml) backup 128KB at 0x180000
UA/(backup_devbml) backup 128KB at 0x1c0000
UA/(backup_devbml) backup 128KB at 0x200000
UA/(backup_devbml) backup 128KB at 0x240000
UA/(backup_devbml) backup 128KB at 0x280000
UA/(backup_devbml) backup 128KB at 0x2c0000
UA/(backup_devbml) backup 128KB at 0x300000
UA/(backup_devbml) backup 128KB at 0x340000
UA/(backup_devbml) backup 128KB at 0x380000
UA/(backup_devbml) backup 128KB at 0x3c0000
UA/(backup_devbml) backup 128KB at 0x400000
UA/(backup_devbml) backup 128KB at 0x440000
UA/(backup_devbml) backup 128KB at 0x480000
UA/(backup_devbml) backup 128KB at 0x4c0000
UA/(backup_devbml) backup 128KB at 0x500000
UA/(backup_devbml) backup 128KB at 0x540000
UA/(backup_devbml) backup 128KB at 0x580000
UA/(backup_devbml) backup 128KB at 0x5c0000
UA/(backup_devbml) backup 128KB at 0x600000
UA/(backup_devbml) backup 128KB at 0x640000
UA/(backup_devbml) backup 128KB at 0x680000
UA/(backup_devbml) backup 128KB at 0x6c0000
UA/(backup_devbml) backup 128KB at 0x700000
UA/(backup_devbml) backup 128KB at 0x740000
page_msize: 4096, phy_unit_size: 262144
common mark dev : /dev/block/bml8 partition size: 0x780000
0xffffffff
page_msize: 4096, phy_unit_size: 262144
common mark dev : /dev/block/bml8 partition size: 0x780000
0xffffffff
UA/(RB_ImageUpdateMain): ++
UA/(RB_ImageUpdateMain) uPartitionName[zImage]
RB_GetBlockSize: returning 0x40000 (262144)
UA/(RB_UpdateImage): ++
UA/(RB_UpdateImage): Delta file name-/data/fota/delta.zImage
unicode_to_char : zImage
pDeviceDatum.pFirstPartitionData->partition_name: zImage
pDeviceDatum.pFirstPartitionData->partition_type: 0
pDeviceDatum.pFirstPartitionData->file_system_type: 0
unicode_to_char : /data/fota/delta.zImage
RB_OpenFile: Path:/data/fota/delta.zImage | Mode: RDONLY
Successful open() *pwHandle:4
[RB] Illegal field in the delta, or that the given delta is invalid
UA/(RB_UpdateImage) return value from RB_vRM_Update: 0x80000539
UA/(RB_UpdateImage): -- ret=-2147482311
UA/(RB_ImageUpdateMain) pCustomerPartData.updated = -1, rest = -1
UA/(RB_ImageUpdateMain): -- ret=-2147482311
page_msize: 4096, phy_unit_size: 262144
common mark dev : /dev/block/bml8 partition size: 0x780000
0xdeade002
UA/(update_all) Kernel update fail
fail!
Open /data/fota/fota.status
fsync after write: 0
Promising ! This software definitely has the ability to write on protected bml partitions.
Now wee need to find how to produce the .delta files
Sounds great Lets hope you guys can figure it all out.
I just send a message to Red Bend Software through their site.
Actually it may help to find any other delta file for their software. Without sample we won't go anywhere...
I hope they will be kind and answer!
Here is a list of interesting strings found in the binary :
Code:
UA/ Platform delta does NOT exist! Skip.
Can not open src file : %s
Can not open dst file : %s
UA/(%s) write %dbytes
UA/(%s) copy file %s->%s
fsync failed with return value: %d
fsync after write: %d
UA/ %s: %s
/dev/block/bml4
/data/fota/dump_sbl
/dev/block/bml7
/data/fota/dump_kernel
/dev/block/bml12
/data/fota/dump_modem
FOTA : Make Block Device Nodes
UA/(%s): mknod path=%s, dev_no=%u
Failed to open %s: %s
Open %s
lseek failed with return value: %d
read failed with return value: %d
success!
DONE
fail!
FAIL
FOTA
UA/ modem delta does NOT exist! Skip.
/data/fota/backup.modem
UA/ zImage delta does NOT exist! Skip.
/dev/block/bml8
UA/ Sbl delta does NOT exist! Skip.
UA/ERROR(%s) get dual sbl siginfo fail!!
/dev/block/bml5
UA/ERROR(%s) can't find vaild Sbl partitions
UA/ERROR(%s) SBL RAM partition alloc fail
UA/ERROR(%s) RB_ImageUpdateMain Fail ret=(0x%d)
/data/fota/command
/sdcard/Android/data/temp.fota.delta/command
UA/(%s) cache download
/cache/recovery
UA/(%s) create /cache/recovery directory
/cache/recovery/command
reboot recovery
UA/(%s): Check Delta : path_idx(%d), part_idx(%d), file_path(%s), cnt(%d)
SBL update fail
UA/(%s) %s
Kernel update fail
Modem update fail
Platform update fail
Post update fail
WARNNIG
Delta Not Exist
/data/fota
/sbin/images/fota.png
UA/(%s) test
Update Fail!!
/data/fota/fota.status
/data/fota/delta.Sbl
/data/fota/delta.zImage
/data/fota/delta.modem
/data/fota/delta.platform
/sdcard/Android/data/temp.fota.delta/delta.Sbl
/sdcard/Android/data/temp.fota.delta/delta.zImage
/sdcard/Android/data/temp.fota.delta/delta.modem
/sdcard/Android/data/temp.fota.delta/delta.platform
RedBend Update Agent %s
commands:
img [partition name] [delta file] [device node] [temp path]
fs [partition name] [delta file] [mount point] [temp path]
all
dump <source dev> <dest file>
restore <source file> <dest dev>
compare <dev1> <dev2>
png [png file name]
all
unknown
/data/fota/fota_Sbl
/data/fota/fota_zImage
Modem
/data/fota/fota_modem
/data/fota/fota_platform
/dev/block/bml11
OFNI
main
update_all
post_update
update_platform
update_modem
update_zImage
update_Sbl
file_copy
check_existence
MakeBMLNodes
UA/(%s): +
UA/(%s): %s (%lx %x)
UA/(%s): -
UA/(%s): %s (%lx %lx)
UA/(%s): memcpy(0x%x, 0x%x, 0x%x)
%07x:
%02x
%02x
BML_GET_DEV_INFO
page_msize: %d, phy_unit_size: %d
open device file
%s: bmldevice_open failed!
%s: bmldevice_info failed!
src: %s
dst: %s partition size: 0x%x
part_size: 0x%x
failed to read from %s (%s)
read finished
read %d bytes
src: %s partition size: 0x%x
dst: %s
failed to write to %s (%s)
done
UA/(%s) src: %s
UA/(%s) dst: %s partition size: 0x%x
UA/(%s) part_size: 0x%x
UA/(%s) read finished
UA/(%s) read %d bytes
UA/(%s) src: %s partition size: 0x%x
UA/(%s) dst: %s
UA/(%s) signature: 0x%x
*WARN* %s partition is already marked as invalid!
UA/(%s) done
page at 0x%x differ!
UA/(%s) backup 128KB at 0x%x
UA/(%s): ++
UA/(%s) 0x%x
UA/ERROR(%s) Valid partition signature is not invalid
UA/(%s): --
%s, invalide magic key(%x)!!
common mark dev : %s partition size: 0x%x
dev: %s partition size: 0x%x
signature: 0x%x
UA/(%s) dev: %s partition size: 0x%x
UA/ERROR(%s) Signature is not validate (%x)
UA/(%s) SBL, SBL2 partition are diffierent size, check your bml device node name
UA/ERROR(%s) Both partition has valid or invalid signature
UA/(%s) Valid Partition-%s, Update Partition-%s
restore_file
backup_block_file
restore_devbml
backup_devbml
store_dualsbl_partition
load_partition
mark_common_recovery
find_valid_partition
check_dualpartition_validation
ram_write_block
ram_read_block
nand_write_block
nand_read_block
bmldevice_get_size
Image size is bigger than partition!
reading NAND page
BML_UNLOCK_ALL
writing NAND page
6,1,14,1
RB_GetBlockSize
%s: returning 0x%x (%d)
RB_ReadBackupBlock
UA/(%s): %s: offset 0x%lx(%ld), size 0x%lx(%ld)
UA/ERROR(%s) open file %s failed.
UA/ open %s file success
UA/ERROR(%s) error in read size
RB_WriteBackupBlock
UA/(%s): offset 0x%lx(%ld), size 0x%lx(%ld)
UA/ERROR(%s) error in write size
RB_ImageUpdateMain
UA/(%s): ++
UA/(%s) uPartitionName[%s]
UA/(%s) pCustomerPartData.updated = %d, rest = %d
UA/(%s): -- ret=%d
RB_UpdateImage
UA/(%s): Delta file name-%s
pDeviceDatum.pFirstPartitionData->partition_name: %s
pDeviceDatum.pFirstPartitionData->partition_type: %d
pDeviceDatum.pFirstPartitionData->file_system_type: %d
UA/(%s) return value from RB_vRM_Update: 0x%x
unicode_to_char
%s : %s
RecursiveFolderCreater
%s path: %s
temppath: %s
mkdir result: %d errno: %d
RB_CopyFile
%s: %s -> %s
NULL file name find. Abort.
Open %s ENOENT %d
Open %s failed. Abort.
read %d, but write %d, abort.
RB_DeleteFile
%s: %s
unlink value: %d, errno: %d
RB_DeleteFolder
rmdir value: %d, errno: %d
RB_CreateFolder
%s: %s, mode:0x%x
RDONLY
WRONLY
RDWR
Unknown
RB_OpenFile
%s: Path:%s | Mode:
First open() with error %d
copy dir[]=%s
remove dir[]=%s
Fail create folder, Leave RB_OpenFile
After successful creating folder, fail open() with error %d
Successful open() *pwHandle:%ld
RB_ResizeFile
%s: handle %ld, dwSize %d
%s: ret %d handle %ld %d
RB_CloseFile
%s: wHandle = %ld
RB_WriteFile
%s: Handle:%ld , Pos:%ld , Size: %ld
lseek failed with return value: %d
Failed with return value: %d
Bytes Write: %d
fsync Failed with return value: %d
fsync after write: %d
RB_ReadFile
%s: Handle:%ld , Pos:%ld , Size: %ld
read failed with return value: %d
RB_GetFileSize
%s: %ld
lseek errno: %d
Returning Size = 0x%x
RB_Unlink
unlink failed with return value: %d
unlink with return value: %d
RB_Link
symlink failed with return value: %d, errno: %d
symlink with return value: %d
RB_VerifyLinkReference
readlink failed with return value: %d
not same linked path
same linked path
RB_GetFileType
stat failed with return value: %d errno: %d
sbuf.st_mode: %d
S_ISREG(sbuf.st_mode): %d
S_ISLNK(sbuf.st_mode): %d
stat->st_mode = symbolic link file
stat->st_mode = regular file
failed to lstat, err : %d
a2ch
%s : %d
Wrong attribute value: %d
a2ch : %c
chtoa
RB_SetFileAttributes
stat failed with return value: %d
sbuf.st_mode value: %d
ui8pAttribs value: %s
ui32AttribSize value: %ld
attrib_user value: %d
attrib_group value: %d
attrib_other value: %d
att_type value: %d
sbuf.st_mode | attrib: %d
chmod failed with return value: %d
chmod with return value: %d
pUserId value: %s
user_id value: %d
aGroupId value: %s
pGroupId value: %s
group_id value: %d
failed chown %d
success chown %d
RB_FSUpdateMain
UA/(%s) Partition name(%s), mount point(%s)
UA/(%s) pCustomerPartData.updated = %ld, rest = %ld
pDeviceDatum.pFirstPartitionData->partition_name: %s
pDeviceDatum.pFirstPartitionData->partition_type: %d
pDeviceDatum.pFirstPartitionData->file_system_type: %d
return value from RB_vRM_Update: 0x%x
%s/flagsFile
return value from unlink(%s): 0x%x
Installing software
Don't turn off the
phone and
connect the power
cable as possible.
System updated &
reboot now
gui_progress
UA/(%s): ++ uPercent(%d%), gv_delta_count=(%ld)
UA/(%s): -- Print Percent(%d%)
%3d %%
lcd_init
%s(%d): start!
/dev/graphics/fb0
%s(%d): fb0 open fail
%s(%d): fb0 open success
%s(%d): width = %d, height = %d
%s(%d): ioctl set info fail
%s(%d): Error: failed to map framebuffer device to memory.
%s(%d): ioctl start fail
Allocation error-
Current start: %d
Current finish: %d
Requested size: %d
Allocation error:
Current start: %d
Current finish: %d
Requested size: %d
It may accept commands somehow, like those :
img [partition name] [delta file] [device node] [temp path]
fs [partition name] [delta file] [mount point] [temp path]
all
dump <source dev> <dest file>
restore <source file> <dest dev>
compare <dev1> <dev2>
png [png file name]
all
I tried writing commands in /data/fota/command and /cache/recovery/command but the program does not follow my orders
ok it works when i flashed zImage
Code:
# redbend_ua restore /sdcard/jm5.zImage /dev/block/bml7
redbend_ua restore /sdcard/jm5.zImage /dev/block/bml7
RedBend Update Agent 6,1,14,1
FOTA : Make Block Device Nodes
lcd_init(498): start!
lcd_init(507): fb0 open success
lcd_init(514): width = 480, height = 800
page_msize: 4096, phy_unit_size: 262144
src: /sdcard/jm5.zImage
dst: /dev/block/bml7 partition size: 0x780000
part_size: 0x780000
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 247184 bytes
read finished
Wow, this is looking promising.
it seems like htc's flash_image,but much more difficult than it.
raspdeep said:
ok it works when i flashed zImage
Code:
# redbend_ua restore /sdcard/jm5.zImage /dev/block/bml7
redbend_ua restore /sdcard/jm5.zImage /dev/block/bml7
RedBend Update Agent 6,1,14,1
FOTA : Make Block Device Nodes
lcd_init(498): start!
lcd_init(507): fb0 open success
lcd_init(514): width = 480, height = 800
page_msize: 4096, phy_unit_size: 262144
src: /sdcard/jm5.zImage
dst: /dev/block/bml7 partition size: 0x780000
part_size: 0x780000
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 247184 bytes
read finished
Click to expand...
Click to collapse
Nice raspdeep
How did you do ? Every attempt fails here (in recovery or standard mode).
Which initramfs version do you use ?
Code:
redbend_ua restore zImage /dev/block/bml7
RedBend Update Agent 6,1,14,1
FOTA : Make Block Device Nodes
lcd_init(498): start!
lcd_init(507): fb0 open success
lcd_init(514): width = 480, height = 800
page_msize: 4096, phy_unit_size: 262144
src: zImage
dst: /dev/block/bml7 partition size: 0x780000
part_size: 0x780000
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 262144 bytes
read 247184 bytes
read finished
Ok yo don't respond but it works here to, booting on your OC kernel. Now i'll find what is different between our setups
supercurio, you are rapidly becoming one of my Android heros...
distortedloop said:
supercurio, you are rapidly becoming one of my Android heros...
Click to expand...
Click to collapse
Don't know if I can live with that
Code:
ll */*
-rwxr-xr-x 1 root curio 313888 2010-08-26 21:14 oc128uv1/redbend_ua*
-rwxr-xr-x 1 curio curio 314004 2010-08-26 21:16 XWJM5/redbend_ua*
md5sum */*
74f5793536c3cdc902ec269c3f51a165 oc128uv1/redbend_ua
b1ba258a5d673c537a95167267afd6b8 XWJM5/redbend_ua
Different binaries !
Edit : attached working redbend_ua
A diff between strings included in binaries (raw infos, not analyzed yet ^^)
Code:
--- not-working 2010-08-26 21:22:39.594984596 +0200
+++ working 2010-08-26 21:22:20.370634450 +0200
@@ -4,7 +4,6 @@
@F2A
bB,2
H{DYX
-/Q{;
/Qs;
/Qk;
/Qc;
@@ -452,71 +451,52 @@
%mB(
@ #!
!1C "
-reboot
-UA/ Platform delta does NOT exist! Skip.
-Can not open src file : %s
-Can not open dst file : %s
-UA/(%s) write %dbytes
-UA/(%s) copy file %s->%s
- fsync failed with return value: %d
- fsync after write: %d
-UA/ %s: %s
+/data/fota/delta.Sbl
/dev/block/bml4
-/data/fota/dump_sbl
+/dev/block/bml5
+/data/fota/fota_Sbl
+/data/fota/delta.zImage
/dev/block/bml7
-/data/fota/dump_kernel
+/data/fota/backup.zImage
+/data/fota/fota_zImage
+Modem
+/data/fota/delta.modem
/dev/block/bml12
+/data/fota/backup.modem
+/data/fota/fota_modem
+/data/fota/delta.platform
+/data/fota/backup.platform
+/data/fota/fota_platform
+platform delta does NOT exist! Skip.
+existence: s1[%d].existence; %d
+%s: %s
+/data/fota/dump_sbl
+/data/fota/dump_kernel
/data/fota/dump_modem
FOTA : Make Block Device Nodes
-UA/(%s): mknod path=%s, dev_no=%u
Failed to open %s: %s
Open %s
lseek failed with return value: %d
read failed with return value: %d
+ fsync failed with return value: %d
+ fsync after write: %d
success!
DONE
fail!
FAIL
FOTA
-UA/ modem delta does NOT exist! Skip.
-/data/fota/backup.modem
-UA/ zImage delta does NOT exist! Skip.
+modem delta does NOT exist! Skip.
+zImage delta does NOT exist! Skip.
/dev/block/bml8
-UA/ Sbl delta does NOT exist! Skip.
-UA/ERROR(%s) get dual sbl siginfo fail!!
-/dev/block/bml5
-UA/ERROR(%s) can't find vaild Sbl partitions
-UA/ERROR(%s) SBL RAM partition alloc fail
-UA/ERROR(%s) RB_ImageUpdateMain Fail ret=(0x%d)
-/data/fota/command
-/sdcard/Android/data/temp.fota.delta/command
-UA/(%s) cache download
-/cache/recovery
-UA/(%s) create /cache/recovery directory
-/cache/recovery/command
-reboot recovery
-UA/(%s): Check Delta : path_idx(%d), part_idx(%d), file_path(%s), cnt(%d)
-SBL update fail
-UA/(%s) %s
-Kernel update fail
-Modem update fail
-Platform update fail
-Post update fail
-WARNNIG
-Delta Not Exist
-/data/fota
-/sbin/images/fota.png
-UA/(%s) test
-Update Fail!!
+Sbl delta does NOT exist! Skip.
+get dual sbl siginfo fail!!
+can't find vaild Sbl partitions
+reboot
+gv_delta_count[%d]
+dump
+restore
+compare
/data/fota/fota.status
-/data/fota/delta.Sbl
-/data/fota/delta.zImage
-/data/fota/delta.modem
-/data/fota/delta.platform
-/sdcard/Android/data/temp.fota.delta/delta.Sbl
-/sdcard/Android/data/temp.fota.delta/delta.zImage
-/sdcard/Android/data/temp.fota.delta/delta.modem
-/sdcard/Android/data/temp.fota.delta/delta.platform
RedBend Update Agent %s
commands:
img [partition name] [delta file] [device node] [temp path]
@@ -527,29 +507,7 @@
compare <dev1> <dev2>
png [png file name]
all
-unknown
-/data/fota/fota_Sbl
-/data/fota/fota_zImage
-Modem
-/data/fota/fota_modem
-/data/fota/fota_platform
-/dev/block/bml11
OFNI
-main
-update_all
-post_update
-update_platform
-update_modem
-update_zImage
-update_Sbl
-file_copy
-check_existence
-MakeBMLNodes
-UA/(%s): +
-UA/(%s): %s (%lx %x)
-UA/(%s): -
-UA/(%s): %s (%lx %lx)
-UA/(%s): memcpy(0x%x, 0x%x, 0x%x)
%07x:
%02x
%02x
@@ -568,71 +526,67 @@
dst: %s
failed to write to %s (%s)
done
-UA/(%s) src: %s
-UA/(%s) dst: %s partition size: 0x%x
-UA/(%s) part_size: 0x%x
-UA/(%s) read finished
-UA/(%s) read %d bytes
-UA/(%s) src: %s partition size: 0x%x
-UA/(%s) dst: %s
-UA/(%s) signature: 0x%x
-*WARN* %s partition is already marked as invalid!
-UA/(%s) done
page at 0x%x differ!
-UA/(%s) backup 128KB at 0x%x
-UA/(%s): ++
-UA/(%s) 0x%x
-UA/ERROR(%s) Valid partition signature is not invalid
-UA/(%s): --
+signature: 0x%x
+*WARN* %s partition is already marked as invalid!
+backup 128KB at 0x%x
+backup 128KB at 0x%x without signature
+clear mark dev : %s partition size: 0x%x
%s, invalide magic key(%x)!!
-common mark dev : %s partition size: 0x%x
dev: %s partition size: 0x%x
-signature: 0x%x
-UA/(%s) dev: %s partition size: 0x%x
-UA/ERROR(%s) Signature is not validate (%x)
-UA/(%s) SBL, SBL2 partition are diffierent size, check your bml device node name
-UA/ERROR(%s) Both partition has valid or invalid signature
-UA/(%s) Valid Partition-%s, Update Partition-%s
-restore_file
-backup_block_file
-restore_devbml
-backup_devbml
-store_dualsbl_partition
-load_partition
+%s:clear:%s partition size: 0x%x
+%s : write and clear signature done
+%s:write:%s partition size: 0x%x
+%s: Signature is not validate (%x)
+%s signature: 0x%x
+%s +
+%s: SBL, SBL2 partition are diffierent size, check your bml device node name
+Both partition has valid or invalid signature
+Valid Partition-%s, Update Partition-%s
+Siginfo error partition $s (0x%x, 0x%x)
mark_common_recovery
+clear_dualpartition_signature
+write_dualpartition_signature
find_valid_partition
check_dualpartition_validation
-ram_write_block
-ram_read_block
-nand_write_block
-nand_read_block
bmldevice_get_size
Image size is bigger than partition!
reading NAND page
BML_UNLOCK_ALL
writing NAND page
6,1,14,1
+RB_Progress
+%s: (%lu %%)
+RB_GetDelta
+%s: offset 0x%lx(%ld), size 0x%lx(%ld)
+%s: open file %s failed.
+%s: error in read size
RB_GetBlockSize
%s: returning 0x%x (%d)
+RB_ReadImage
+%s: node-%s (%lx %lx)
+RB_WriteBlock
+%s: node-%s (%lx %x)
RB_ReadBackupBlock
-UA/(%s): %s: offset 0x%lx(%ld), size 0x%lx(%ld)
-UA/ERROR(%s) open file %s failed.
-UA/ open %s file success
-UA/ERROR(%s) error in read size
+%s: offset 0x%lx(%ld), size 0x%lx(%ld)
+%s: open file %s failed.
+%s: error in read size
RB_WriteBackupBlock
-UA/(%s): offset 0x%lx(%ld), size 0x%lx(%ld)
-UA/ERROR(%s) error in write size
+%s: error in write size
+RB_ImageUpdateCommon
+uPartitionName[%s]
+%s: pCustomerPartData.updated = %d, rest = %d
RB_ImageUpdateMain
-UA/(%s): ++
-UA/(%s) uPartitionName[%s]
-UA/(%s) pCustomerPartData.updated = %d, rest = %d
-UA/(%s): -- ret=%d
-RB_UpdateImage
-UA/(%s): Delta file name-%s
+%s: backup_file is %s
+%s: size of %s(%s) is %d bytes
+RB_ImageUpdateDualPartition
+%s: backup file(%s) / Valid Partition(%s) / Update Partition(%s)
+%s : RB Image Update Fail
+%s : RB Image Update Done %s
pDeviceDatum.pFirstPartitionData->partition_name: %s
pDeviceDatum.pFirstPartitionData->partition_type: %d
pDeviceDatum.pFirstPartitionData->file_system_type: %d
-UA/(%s) return value from RB_vRM_Update: 0x%x
+return value from RB_vRM_Update: 0x%x
unicode_to_char
%s : %s
RecursiveFolderCreater
@@ -726,8 +680,7 @@
failed chown %d
success chown %d
RB_FSUpdateMain
-UA/(%s) Partition name(%s), mount point(%s)
-UA/(%s) pCustomerPartData.updated = %ld, rest = %ld
+%s: pCustomerPartData.updated = %ld, rest = %ld
pDeviceDatum.pFirstPartitionData->partition_name: %s
pDeviceDatum.pFirstPartitionData->partition_type: %d
pDeviceDatum.pFirstPartitionData->file_system_type: %d
@@ -741,9 +694,9 @@
cable as possible.
System updated &
reboot now
-gui_progress
-UA/(%s): ++ uPercent(%d%), gv_delta_count=(%ld)
-UA/(%s): -- Print Percent(%d%)
+Update is ok.
+Update is failed.
+Restoring...
%3d %%
lcd_init
%s(%d): start!
@@ -962,12 +915,6 @@
insufficient memory
buffer error
incompatible version
-RB_Progress
-%s: (%lu %%)
-RB_GetDelta
-%s: offset 0x%lx(%ld), size 0x%lx(%ld)
-%s: open file %s failed.
-%s: error in read size
Pure virtual function called. Are you calling virtual methods from a destructor?
libc-abort
abort() called in pid %d
@@ -1120,6 +1067,7 @@
/dev/log/main
/dev/log/radio
/proc/self/exe
+unknown
/dev/urandom
stack corruption detected: aborted
ANDROID_PROPERTY_WORKSPACE
Whilst we're talking about retrieving information from binaries...
Does anyone know any good disassembly tools. I managed to compile objdump for ARM (ELF) and run it on the Galaxy S secondary bootloader but it only partially works. It doesn't look like it is handling the binary layout correctly. It's unsure how much of the binary is data and how much is actual instructions so it ends up converting the whole thing to instructions (most of which are obviously bogus).
Benjamin Dobell said:
Whilst we're talking about retrieving information from binaries...
Does anyone know any good disassembly tools. I managed to compile objdump for ARM (ELF) and run it on the Galaxy S secondary bootloader but it only partially works. It doesn't look like it is handling the binary layout correctly. It's unsure how much of the binary is data and how much is actual instructions so it ends up converting the whole thing to instructions (most of which are obviously bogus).
Click to expand...
Click to collapse
Under Linux i use the minimalist tool named "strings". You can learn so much just by reading strings extracted ^^.
Otherwise you have IDA Pro (Windows), which is very powerful.
Benjamin, like you i found objdump quite challenging to use.. and.. not that fun.
supercurio said:
Under Linux i use the minimalist tool named "strings". You can learn so much just by reading strings extracted ^^.
Otherwise you have IDA Pro (Windows), which is very powerful.
Benjamin, like you i found objdump quite challenging to use.. and.. not that fun.
Click to expand...
Click to collapse
Unfortunately IDA Pro doesn't seem to work either. IDA Pro Free doesn't support ARM at all and I tried with IDA Pro Advanced but it seemed to have similar issues to objdump, it couldn't determine the entry point etc.
If I could just get the assembler with comments next to it that indicate which pieces of data (strings in particular) are being referenced that would make my day.
Do you think Sbl.bin is a single unique binary ?
Considering everything that this Second Boot Loader is able to do, i would not be surprised if it's more complex than that.
Anyway I can't say much more about the tools, i'm just a rookie hacker
supercurio said:
Do you think Sbl.bin is a single unique binary ?
Considering everything that this Second Boot Loader is able to do, i would not be surprised if it's more complex than that.
Click to expand...
Click to collapse
It wouldn't be a very reliable boot loader if it depended on other binaries (other than data passed to it by the primary boot loader). However the information I'm after, the Loke protocol, is definitely in there cause I can see the handshake strings I send and receive with Heimdall.
working this into SRE RIGHT NOW!!!!
--edit
scripted, and working
release coming soon!!
designgears said:
working this into SRE RIGHT NOW!!!!
Click to expand...
Click to collapse
Nice
Remember being EXTRA careful manipulating raw bml partitions. You can easily brick your phone for good writing bad data in place of first and second bootloader.
NON-RECOVERABLE
please say that to every potential redbend_ua users
This was the required warning, now enjoy
supercurio said:
Nice
Remember being EXTRA careful manipulating raw bml partition. You can easily
brick your phone for good writing bad data in place of first and second bootloader.
NON-RECOVERABLE
please say that to every potential redbend_ua users
This was the required warning, now enjoy
Click to expand...
Click to collapse
I have borked bml17 before.. was able to go into download and restore stock.
I am too dumb to find correct region... adresses...
But 2 ways...
1.
JTAG
Not solved yet...
2.
Via Command... + WinComm...
http://forum.xda-developers.com/showpost.php?p=12798324&postcount=3
Code:
[B]Memcpy[/B] address length
Example:
Memcpy 0x00000000 0x100
On U700 I can dump RAM on 0... but not on S8500...
Any suggestions?
Thanx.
Best Regards
Edit.:
Found in ELFs:
SDRAM_START_ADDR 0x20000000
SDRAM_END_ADDR 0x6CFFFFFF
See Screenshots. If Debug Level is Mid or High... but I don't understand, what my handset say to me...
On U700 in Debug Level Low possible to read something... on S8500 no success yet.
But maybe my fault.
Have you find the secret upload mode?
If you go to Fota in internals menu and Type something in there than bada crashes and you have got the upload mode (light bluascreen than only restart with key). but how to communicate with the device, i had not found any tool on the GSPN from samsung.
Try to memcpy RAM from 0x20000000 and 0x40000000 in S8500/8530.
Under the first one address you should find 128MB (0x8000000) of oneDRAM and under the second one 256MB (0x10000000) of SDRAM.
Rebellos said:
Try to memcpy RAM from 0x20000000 and 0x40000000 in S8500/8530.
Under the first one address you should find 128MB (0x8000000) of oneDRAM and under the second one 256MB (0x10000000) of SDRAM.
Click to expand...
Click to collapse
A small doubt:
http://dev.odroid.com/wiki/odroid-t/pds/FrontPage/s_blockdiagram.jpg
Does LPDDR1 corresponds to SDRAM?
jake792 said:
A small doubt:
http://dev.odroid.com/wiki/odroid-t/pds/FrontPage/s_blockdiagram.jpg
Does LPDDR1 corresponds to SDRAM?
Click to expand...
Click to collapse
SDRAM is kind of RAM, widely used in computers nowadays
http://en.wikipedia.org/wiki/Synchronous_dynamic_random_access_memory
LPDDR is subtype of SDRAM designed for mobile phones, that is Low-Power Ram.
I'm not sure if thats LPDDR1 or LPDDR2 in Waves.
Thanx.Also since total amount of ram is 384mb.. lesser availibility of free ram would be there.
Bump...
I have not managed problem to dump memory...
Maybe in RAM it is possible to catch some uncompressed data...
Thanx in advance.
Best Regards
Blub...
Problem 1 unsolved to read from handset via Command in bada:
Code:
[B]Memcpy[/B] address length
Memory Map...Partition Table etc. would be interesting for me in 2013...
Maybe start with Partition Table...
I need more space for apps_compressed.bin in bada 2 XXLA1...
Other ideas decrease for instance OSP partition... for test...
I have now access to edit direct in Binary Bootloader... aka boot_loader.mbn.
My skills to understand source or ELF files are very very EXTREME limited.
Maybe S8500 and S8530 have easy "partition Block" like partition.bin from S8600...
Thanx for reading.
Best Regards
Edit 1.
In ELF it is easier to find...
Code:
FLASH_MODEM_START_ADDR 0x00400000
FLASH_MODEM_END_ADDR 0x01100000
FLASH_CODE_START_ADDR 0x01100000
FLASH_CODE_END_ADDR (0x03100000+FLASH_FOTA_HOLE_RESERVED_SIZE)
FLASH_CODE_COMPRESS_START_OFFSET 0x800
Hmm.
Code:
01100000
I could check Little Endian... in boot_loader.mbn
XPKG5 need other addresses for RC1 and RC2
Also MBUKI...
I need this to identify addresses in Boot...
Best Regards
http://forum.xda-developers.com/showpost.php?p=20188325&postcount=369
Code:
// firmware qmd ver start addr max length
{ S8500v12 | BADA_APPS, 0x03050000, 0x01100000, 0x03500000 },
{ S8500v12 | BADA_RSRC1, 0x04070000, 0x04800000, 0x06F00000 },
{ S8500v12 | BADA_RSRCS, 0x04070000, 0x0B700000, 0x00F00000 },
{ S8530v12 | BADA_APPS, 0x03050000, 0x01300000, 0x03500000 },
{ S8530v12 | BADA_RSRC1, 0x04070000, 0x04A00000, 0x05000000 },
{ S8530v12 | BADA_RSRCS, 0x04070000, 0x09A00000, 0x00F00000 },
{ S8500v20 | BADA_APPS, 0x04020000, 0x01100000, 0x02000000 },
{ S8500v20 | BADA_RSRC1, 0x05020000, 0x05D00000, 0x05A00000 },
{ S8500v20 | BADA_RSRCS, 0x05020000, 0x03A00000, 0x02300000 },
{ S8530v20 | BADA_APPS, 0x04020000, 0x01300000, 0x02000000 },
{ S8530v20 | BADA_RSRC1, 0x05020000, 0x03600000, 0x04100000 },
{ S8530v20 | BADA_RSRCS, 0x05020000, 0x07700000, 0x01E00000 },
{ S8600 | BADA_APPS, 0x04020000, 0x08000000, 0x02000000 },
{ S8600 | BADA_RSRC1, 0x05020000, 0x0A200000, 0x03200000 },
{ S8600 | BADA_RSRCS, 0x05020000, 0x0D400000, 0x02800000 },
{ S7250D | BADA_APPS, 0x04020000, 0x00E00000, 0x01F00000 },
{ S7250D | BADA_RSRC1, 0x05020000, 0x02F00000, 0x01E00000 },
{ S7250D | BADA_RSRCS, 0x05020000, 0x04D00000, 0x01C00000 },
Perfect overview, very helpfull.
Big thanx b.kubica :good:
Best Regards
Memo to me...
Code:
-----------------------------------------------------------
Samsung Secondary Bootloader (SBL) v3.0
Copyright (C) Samsung Electronics Co..
Build On: Jun 8 2011 21:44:47
-----------------------------------------------------------
Re_partition: magic code(0x0)
[PAM: ] ++FSR_PAM_Init
[PAM: ] OneNAND physical base address : 0xb0000000
[PAM: ] OneNAND virtual base address : 0xb0000000
[PAM: ] OneNAND nMID=0xec : nDID=0x50
[PAM: ] --FSR_PAM_Init
fsr_bml_load_partition: pi->[B]nNumOfPartEntry = 7[/B]
partitions loading success
board partition information update.. source: 0x0
.Done.
read 1 units.
==== PARTITION INFORMATION ====
ID : *unknown id* (0x9)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 0
NO_UNITS : 1
===============================
ID : *unknown id* (0x0)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 1
NO_UNITS : 7
===============================
ID : *unknown id* (0x1)
ATTR : RW SLC (0x1001)
FIRST_UNIT : 8
NO_UNITS : 796
===============================
ID : *unknown id* (0x14)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 804
NO_UNITS : 716
===============================
ID : *unknown id* (0x15)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 1520
NO_UNITS : 372
===============================
ID : *unknown id* (0x17)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 1892
NO_UNITS : 56
===============================
ID : *unknown id* (0x18)
ATTR : RW SLC (0x1001)
FIRST_UNIT : 1948
NO_UNITS : 56
===============================
It is possible to "identify" partitons on OneNAND via SBL from I9000 etc...
pi->nNumOfPartEntry = 7
bada Bootloader shows something like this:
Code:
[BM : ] FSR_BML_GetFullPartI() is completed
[BM : ] stPartI.nNumOfPartEntry : 7
[BM : ] 1th PartEntrt(nAttr:0x1002)(nID:0x0)
[BM : ] [1th] pPEntry->n1stVun : 1
[BM : ] [1th] [B]pPEntry->nNumOfUnits : 7[/B]
[BM : ] [1th] pPEntry->nLoadAddr : 0x0
+-------------------------------+
| Bootloader Shadowing FINISHED |
+-------------------------------+
Launch Image at 0x42480000
Catched via UART cable... + JTAG...
Will play little bit with
I9000_s1_odin_20100512.pit
and
I9000_s1_odin_20100803.pit
Tasks for 2014...
Learning more about Partitions...
Best Regards
Edit 1.
Short modified I9000_s1_odin_20100512.pit...
Code:
fsr_bml_load_partition: pi->nNumOfPartEntry = 12
partitions loading success
board partition information update.. source: 0x0
.Done.
read 1 units.
==== PARTITION INFORMATION ====
ID : IBL+PBL (0x0)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 0
NO_UNITS : 1
===============================
ID : PIT (0x1)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 1
NO_UNITS : 1
===============================
ID : EF[COLOR="Red"]1[/COLOR] (0x14)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 2
NO_UNITS : 40
===============================
ID : SB[COLOR="Red"]1[/COLOR] (0x3)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 42
NO_UNITS : 5
===============================
ID : SBL[COLOR="Red"]1[/COLOR] (0x4)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 47
NO_UNITS : 5
===============================
ID : PARA[COLOR="Red"]1[/COLOR] (0x15)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 52
NO_UNITS : 20
===============================
ID : KERNE[COLOR="Red"]1[/COLOR] (0x6)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 72
NO_UNITS : 30
===============================
ID : RECOVER[COLOR="Red"]1[/COLOR] (0x7)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 102
NO_UNITS : 30
===============================
ID : FACTORYF[COLOR="Red"]1[/COLOR] (0x16)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 132
NO_UNITS : 1146
===============================
ID : DBDATAF[COLOR="Red"]1[/COLOR] (0x17)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 1278
NO_UNITS : 536
===============================
ID : CACH[COLOR="Red"]1[/COLOR] (0x18)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 1814
NO_UNITS : 140
===============================
ID : MODE[COLOR="Red"]1[/COLOR] (0xb)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 1954
NO_UNITS : 50
===============================
RO I think should mean read only
RW = read/write
SLC and STL
NO_UNITS = Number of ... maybe... not sure
STL = Section Translation Layer (Google for BML FSR and BML STL by Samsung)
unit = 256kB or so
No idea what's SLC, "Single Level Cell" doesn't make much sense here
Probably answer is in there - https://github.com/supercurio/samsung_fsr
About SLC, etc, I wrote something about this here:
http://forum.xda-developers.com/showpost.php?p=33359041&postcount=6
I think the relevant info is in the links...
http://forum.xda-developers.com/showthread.php?t=816449
Found this usefull thread about PIT...
2014 I will play little bit Partition file PIT.
Ideas.
1.
Modifying PIT to 1 partition over the whole size... in my case 512 MB...
To write maxbe Fulldumps...
If this is nonsense during few Security limitations...
2.
Increasing first Partition to write 4 MB boot.bin... to solve this Security thingie...
http://forum.xda-developers.com/showthread.php?t=1250270
So maybe then bada Boot restoreable with SBL...
Summary...
Units seems Blocks... seems 256 KB size...
So I need instead 1 Unit... 16 for Partition 1...
Later more, I will try to "convert" this info from here now:
Code:
==== PARTITION INFORMATION ====
ID : *unknown id* (0x9)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 0
NO_UNITS : 1
Taken from here:
http://forum.xda-developers.com/showpost.php?p=49033160&postcount=11
Best Regards
Edit 1.
So bada Partition table/info looks like this... S8500..
Little bit explained... later more
Code:
==========================
ID
ATTR
FIRST_UNIT 0
NO_UNITS 1
00000000-00040000
[B]256 KB[/B]
==========================
ID
ATTR
FIRST_UNIT 1
NO_UNITS 7
00040000-001C0000
1792 KB [B]2 MB[/B]
1835008 Byte
==========================
ID
ATTR
FIRST_UNIT 8
NO_UNITS 796
203776 KB [B]203 MB[/B]
208666624 Byte
==========================
ID
ATTR
FIRST_UNIT 804
NO_UNITS 716
183296 KB [B]183 MB[/B]
187695104 Byte
==========================
ID
ATTR
FIRST_UNIT 1520
NO_UNITS 372
95232 KB [B]95 MB[/B]
97517568 Byte
==========================
ID
ATTR
FIRST_UNIT 1892
NO_UNITS 56
14336 KB [B]14 MB[/B]
14680064 Byte
==========================
ID
ATTR
FIRST_UNIT 1948
NO_UNITS 56
14336 KB [B]14 MB[/B]
14680064 Byte
===========================
Code:
<6>Scanning device for bad blocks
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x92 addr8 0x0
<6>OneNAND eraseblock 146 is an initial bad block
<7>onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x5cc addr8 0x0
<6>OneNAND eraseblock 1484 is an initial bad block
<6>OneNAND eraseblock 2047 is an initial bad block
<5>Creating 11 MTD partitions on "(null)":
<5>0x00001f000000-0x00001f500000 : "nv_data"
<5>0x000000400000-0x000009800000 : "fw_block"
<5>0x000000400000-0x000000600000 : "dbl"
<5>0x000000600000-0x000001380000 : "amss"
<5>0x000001300000-0x000003600000 : "apps"
<5>0x000003600000-0x000007700000 : "rsrc1"
<5>0x000007700000-0x000009500000 : "csc"
<5>0x000009500000-0x000009800000 : "fota"
<5>0x000009800000-0x000018f00000 : "stl1"
<5>0x000018f00000-0x00001ec00000 : "stl2"
<5>0x00001ec00000-0x00001f000000 : "secdata"
S8530 UART Log... with latest Android from volk204...
Later I will compare S8500...
Best Regards
S8530 SD-Version ZenDroKat
/proc/mtd
Code:
dev: size erasesize name
mtd0: 00500000 00040000 "nv_data"
mtd1: 09400000 00040000 "fw_block"
mtd2: 00200000 00040000 "dbl"
mtd3: 00d80000 00040000 "amss"
mtd4: 02300000 00040000 "apps"
mtd5: 04100000 00040000 "rsrc1"
mtd6: 01e00000 00040000 "csc"
mtd7: 00300000 00040000 "fota"
mtd8: 0f700000 00040000 "stl1"
mtd9: 05d00000 00040000 "stl2"
mtd10: 00400000 00040000 "secdata"
/proc/partitions
Code:
major minor #blocks name
31 0 5120 mtdblock0
31 1 151552 mtdblock1
31 2 2048 mtdblock2
31 3 13824 mtdblock3
31 4 35840 mtdblock4
31 5 66560 mtdblock5
31 6 30720 mtdblock6
31 7 3072 mtdblock7
31 8 252928 mtdblock8
31 9 95232 mtdblock9
31 10 4096 mtdblock10
253 0 488284 zram0
179 0 1912832 mmcblk0
179 1 602112 mmcblk0p1
179 2 401408 mmcblk0p2
179 3 909311 mmcblk0p3
179 16 1024 mmcblk0boot1
179 8 1024 mmcblk0boot0
179 24 15632384 mmcblk1
179 25 11330560 mmcblk1p1
179 26 18432 mmcblk1p2
179 27 563200 mmcblk1p3
179 28 3719168 mmcblk1p4
http://download.tizen.org/releases/daily/1.0/sbs/
Oh, about PIT...
Check content of file:
lutil.tar.gz
Attached...
Best Regards
Edit 1.
Oh, maybe this helps me to unterstand more...
PIT/XML files
=============
You can convert a PIT file to XML format as follows:
./pit2xml pit/SLP_ALL_Ver04.pit SLP_ALL_Ver04.xml
and back again:
./xml2pit SLP_ALL_Ver04.xml SLP_ALL_Ver04.pit
The relevant data in the file should remain the same.
The XML for SLP_ALL_Ver04.pit looks like this:
Click to expand...
Click to collapse
Edit 2.
According to this example:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<root>
<partition Name="ipl+recovery" FileName="ipl-recovery.bin" DeltaName="" BlockSize="256" BlockLength="2"/>
<partition Name="pit" FileName="pit" DeltaName="" ID="1" BlockSize="256" BlockLength="2"/>
<partition Name="csa" FileName="csa" DeltaName="" ID="2" BlockSize="256" BlockLength="32"/>
<partition Name="u-boot" FileName="u-boot-whdr.bin" DeltaName="" ID="3" BlockSize="256" BlockLength="4"/>
<partition Name="u-boot_bak" FileName="u-boot-whdr.bin" DeltaName="" ID="4" BlockSize="256" BlockLength="4"/>
<partition Name="params" FileName="params" DeltaName="" ID="5" BlockSize="256" BlockLength="4"/>
<partition Name="config" FileName="config" DeltaName="" ID="6" BlockSize="256" BlockLength="8"/>
<partition Name="kernel" FileName="uImage" DeltaName="" ID="7" BlockSize="256" BlockLength="28"/>
<partition Name="kernel_bak" FileName="uImage" DeltaName="" ID="8" BlockSize="256" BlockLength="28"/>
<partition Name="log" FileName="log" DeltaName="" ID="9" BlockSize="256" BlockLength="5"/>
<partition Name="modem" FileName="modem.img" DeltaName="" BinType="1" ID="10" BlockSize="256" BlockLength="64"/>
<partition Name="qboot" FileName="qboot" DeltaName="" ID="11" BlockSize="256" BlockLength="240"/>
<partition Name="UBI" FileName="ubi.img" DeltaName="" ID="12" Attribute="1" BlockSize="256" BlockLength="1627"/>
<partition Name="movinand" FileName="movinand.bin" DeltaName="" DevType="2" Attribute="1"/>
<partition Name="csc" FileName="rfs_part4.csc" DeltaName="" DevType="2" ID="4" Attribute="1"/>
</root>
I will try to "convert":
Code:
I9000_s1_odin_20100512.pit
I9000_s1_odin_20100803.pit
First by hand and my low brain...
Code:
===============================
ID : CACHE (0x18)
ATTR : RW STL SLC (0x1101)
FIRST_UNIT : 1814
NO_UNITS : [B]130[/B]
===============================
ID : MODEM (0xb)
ATTR : RO SLC (0x1002)
FIRST_UNIT : 1944
NO_UNITS : [B]60[/B]
===============================
Aha...
increased reserved space for AMSS... in:
I9000_s1_odin_20100512.pit
Need this for stupid tests... to start with patched SBL...
Best Regards
didn't they already understood and documented every possible part of pit file format?
didn't they already understood
Click to expand...
Click to collapse
Thanx for Link, never seen before...
No idea yet, how easy it is to use... for me.
At the moment for me it is easier to use my little brain + WinHex + example from Samsung Tizen team... in XML Format.
And I am on the older Stuff like I9000 PIT... OneNAND... not eMMC/moviNAND...
No Encryption...
Best Regards
Edit 1.
Short tested this:
http://jenkins.casual-dev.com/job/Analyze PIT File/build
Used this PIT from I9000...
I9000_s1_odin_20100512.pit
Code:
-----BEGIN PIT ANALYSIS-----
PIT Name: T A
PIT Parameter: àú
PIT Parameter: ØC
Entry Count: 13
File Type:
--- Entry #0 ---
ID: 0 Partition Name: IBL+PBL param: S param: e param: r param: v param: e param: r param: \ param: 9 param: 0 param: \ param: T param: o
Filename: boot.bin param: i param: n param: n param: ; param: C param: : param: \ param: P param: r param: o param: g
Block Size: 1 (512B)
Block range: 256 - 256 (hex 0x100 - 0x100)
FilesystemType: 0 PartType: 0 DevType: 0 BinType: 0
Offset:6684783 Size: 2097268 FOTA: param: a param: m param: param: F param: i param: l param: e param: s param: \ param: E param: S param: T param: s param: o param: f
The IBL+PBL param: S param: e param: r param: v param: e param: r param: \ param: 9 param: 0 param: \ param: T param: o partition, identified as partition number 0, is 512B in size and carries a raw format. This partition resides on the Raw section of the AP undocumented. It identifies itself to Odin as boot.bin param: i param: n param: n param: ; param: C param: : param: \ param: P param: r param: o param: g.The partition carries a filesize of 2097268 and an offset of 6684783.
--- Entry #1 ---
ID: 1 Partition Name: PIT
Filename: param: ries.pit
Block Size: 1 (512B)
Block range: 256 - 256 (hex 0x100 - 0x100)
FilesystemType: 0 PartType: 0 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The PIT partition, identified as partition number 1, is 512B in size and carries a raw format. This partition resides on the Raw section of the AP undocumented. It identifies itself to Odin as param: ries.pit.
--- Entry #2 ---
ID: 20 Partition Name: EFS
Filename: efs.rfs
Block Size: 40 (20.5kB)
Block range: 256 - 295 (hex 0x100 - 0x127)
FilesystemType: 0 PartType: 2 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The EFS partition, identified as partition number 20, is 20.5kB in size and carries a raw format. This partition resides on the Bootloader section of the AP undocumented. It identifies itself to Odin as efs.rfs.
--- Entry #3 ---
ID: 3 Partition Name: SBL
Filename: sbl.bin
Block Size: 5 (2.6kB)
Block range: 256 - 260 (hex 0x100 - 0x104)
FilesystemType: 0 PartType: 0 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The SBL partition, identified as partition number 3, is 2.6kB in size and carries a raw format. This partition resides on the Raw section of the AP undocumented. It identifies itself to Odin as sbl.bin.
--- Entry #4 ---
ID: 4 Partition Name: SBL2
Filename: sbl.bin
Block Size: 5 (2.6kB)
Block range: 256 - 260 (hex 0x100 - 0x104)
FilesystemType: 0 PartType: 0 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The SBL2 partition, identified as partition number 4, is 2.6kB in size and carries a raw format. This partition resides on the Raw section of the AP undocumented. It identifies itself to Odin as sbl.bin.
--- Entry #5 ---
ID: 21 Partition Name: PARAM
Filename: param.lfs
Block Size: 20 (10.2kB)
Block range: 256 - 275 (hex 0x100 - 0x113)
FilesystemType: 0 PartType: 2 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The PARAM partition, identified as partition number 21, is 10.2kB in size and carries a raw format. This partition resides on the Bootloader section of the AP undocumented. It identifies itself to Odin as param.lfs.
--- Entry #6 ---
ID: 6 Partition Name: KERNEL
Filename: zImage
Block Size: 30 (15.4kB)
Block range: 256 - 285 (hex 0x100 - 0x11d)
FilesystemType: 0 PartType: 0 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The KERNEL partition, identified as partition number 6, is 15.4kB in size and carries a raw format. This partition resides on the Raw section of the AP undocumented. It identifies itself to Odin as zImage.
--- Entry #7 ---
ID: 7 Partition Name: RECOVERY
Filename: zImage
Block Size: 30 (15.4kB)
Block range: 256 - 285 (hex 0x100 - 0x11d)
FilesystemType: 0 PartType: 0 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The RECOVERY partition, identified as partition number 7, is 15.4kB in size and carries a raw format. This partition resides on the Raw section of the AP undocumented. It identifies itself to Odin as zImage.
--- Entry #8 ---
ID: 22 Partition Name: FACTORYFS
Filename: factoryfs.rfs
Block Size: 1146 (586.8kB)
Block range: 256 - 1401 (hex 0x100 - 0x579)
FilesystemType: 0 PartType: 2 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The FACTORYFS partition, identified as partition number 22, is 586.8kB in size and carries a raw format. This partition resides on the Bootloader section of the AP undocumented. It identifies itself to Odin as factoryfs.rfs.
--- Entry #9 ---
ID: 23 Partition Name: DBDATAFS
Filename: dbdata.rfs
Block Size: 536 (274.4kB)
Block range: 256 - 791 (hex 0x100 - 0x317)
FilesystemType: 0 PartType: 2 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The DBDATAFS partition, identified as partition number 23, is 274.4kB in size and carries a raw format. This partition resides on the Bootloader section of the AP undocumented. It identifies itself to Odin as dbdata.rfs.
--- Entry #10 ---
ID: 24 Partition Name: CACHE
Filename: cache.rfs
Block Size: 140 (71.7kB)
Block range: 256 - 395 (hex 0x100 - 0x18b)
FilesystemType: 0 PartType: 2 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The CACHE partition, identified as partition number 24, is 71.7kB in size and carries a raw format. This partition resides on the Bootloader section of the AP undocumented. It identifies itself to Odin as cache.rfs.
--- Entry #11 ---
ID: 11 Partition Name: MODEM
Filename: modem.bin
Block Size: 50 (25.6kB)
Block range: 256 - 305 (hex 0x100 - 0x131)
FilesystemType: 0 PartType: 0 DevType: 0 BinType: 0
Offset:0 Size: 0 FOTA:
The MODEM partition, identified as partition number 11, is 25.6kB in size and carries a raw format. This partition resides on the Raw section of the AP undocumented. It identifies itself to Odin as modem.bin.
--- Entry #12 ---
[B]ID: 11 Partition Name:
Filename:
Block Size: 0 (0B)
Block range: 0 - -1 (hex 0x0 - 0xffffffff)
FilesystemType: 0 PartType: 0 DevType: 1 BinType: 1
Offset:0 Size: 0 FOTA:
The partition, identified as partition number 11, is 0B in size and carries a raw format. This partition resides on the Raw section of the CP NAND.
[/B]
-----END PIT ANALYSIS-----
Helpfull to understand maybe last few Bytes of PIT...
Anyway... output not 100 % correct, because Blocksize is 256 KB, instead 512 Byte...
Its the difference between eMCC/moviNAND versus OneNAND...
I recently started with building LineageOS. However, I see that ccache isn't working for me for some reason. The ccache directory size is just 56MB. The build takes the same amount of time ~5hr(on my laptop). I've even set the cache size as 70GB. However, my out directory is 55.7GB. What am I doing wrong?
Probable relevant log:
Code:
[ 99% 40898/40912] Target cache fs ima...age/out/target/product/kenzo/cache.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img ext4 cache 268435456 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L cache -l 268435456 -a cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label: cache
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16384 inodes and 2089/65536 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img', 'ext4', 'cache', '268435456', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img maxsize=273985536 blocksize=135168 total=6398184 reserve=2838528
[ 99% 40904/40912] Construct recovery from boot
failed to reconstruct target deflate chunk 1 [(null)]; treating as normal
chunk 0: type 0 start 0 len 9041930
chunk 1: type 2 start 9041930 len 4148992
chunk 2: type 0 start 10711741 len 1347
Construct patches for 3 chunks...
patch 0 is 205 bytes (of 9041930)
patch 1 is 5082118 bytes (of 1669811)
patch 2 is 152 bytes (of 1347)
chunk 0: normal ( 0, 9041930) 205
chunk 1: deflate ( 9041930, 7662273) 5082118 (null)
chunk 2: normal ( 16704203, 1333) 152
[ 99% 40904/40912] Target userdata fs .../out/target/product/kenzo/userdata.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img ext4 data 26838785024 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L data -l 26838785024 -a data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 26838781952
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label: data
Blocks: 6552437
Block groups: 200
Reserved block group size: 1024
Created filesystem with 38/1638400 inodes and 150074/6552437 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img', 'ext4', 'data', '26838785024', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img maxsize=27400671936 blocksize=135168 total=155432808 reserve=276824064
[ 99% 40908/40912] Target system fs im...G/systemimage_intermediates/system.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 2684354560 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L system -l 2684354560 -a system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3340/163840 inodes and 292571/655360 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img', 'ext4', 'system', '2684354560', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
[ 99% 40909/40912] Install system fs i...ge/out/target/product/kenzo/system.img
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system.img+/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=2740531200 blocksize=135168 total=1160426351 reserve=27709440
[ 99% 40910/40912] Package target file...eage_kenzo-target_files-d4b338b746.zip
using prebuilt recovery.img from BOOTABLE_IMAGES...
using prebuilt boot.img from BOOTABLE_IMAGES...
putting script in bin/install-recovery.sh
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-cmkmqI
++++ boot ++++
using prebuilt boot.img from BOOTABLE_IMAGES...
++++ recovery ++++
using prebuilt recovery.img from BOOTABLE_IMAGES...
++++ recovery (two-step image) ++++
building image from target_files RECOVERY...
running: mkbootfs -f /tmp/targetfiles-cmkmqI/META/recovery_filesystem_config.txt /tmp/targetfiles-cmkmqI/RECOVERY/RAMDISK
running: minigzip
running: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/mkbootimg --kernel /tmp/targetfiles-cmkmqI/RECOVERY/kernel --cmdline androidboot.hardware=qcom ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 ramoops_memreserve=4M buildvariant=userdebug --base 0x80000000 --pagesize 2048 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --os_version 7.1.2 --os_patch_level 2017-08-05 --ramdisk /tmp/tmpFzhpAo --output /tmp/tmpBQOvrL
++++ system ++++
creating system.img...
BuildImage: in_dir = /tmp/targetfiles-cmkmqI/system, out_file = /tmp/system-d7Wo62.img
fs type is not ext4
Running: mkuserimg.sh -s /tmp/targetfiles-cmkmqI/system /tmp/system-d7Wo62.img ext4 system 2684354560 -T 1230748200 -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system /tmp/targetfiles-cmkmqI/META/file_contexts.bin
make_ext4fs -s -T 1230748200 -S /tmp/targetfiles-cmkmqI/META/file_contexts.bin -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system -l 2684354560 -a system /tmp/system-d7Wo62.img /tmp/targetfiles-cmkmqI/system
loaded 3332 fs_config entries
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3342/163840 inodes and 292951/655360 blocks
Running ['mkuserimg.sh', '-s', '/tmp/targetfiles-cmkmqI/system', '/tmp/system-d7Wo62.img', 'ext4', 'system', '2684354560', '-T', '1230748200', '-C', '/tmp/targetfiles-cmkmqI/META/filesystem_config.txt', '-B', '/tmp/system-blocklist-OsEPwM.map', '-L', 'system', '/tmp/targetfiles-cmkmqI/META/file_contexts.bin'] command, exit code = 0
++++ userdata ++++
creating userdata.img...
BuildImage: in_dir = /tmp/tmpbdwQbq/data, out_file = /tmp/tmpucca6X
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpucca6X 26838785024
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 26838785024 /tmp/tmpucca6X
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 1.250%
Info: Overprovision segments = 323 (GC reserved = 167)
Running ['mkf2fsuserimg.sh', '/tmp/tmpucca6X', '26838785024'] command, exit code = 0
userdata size (14) is 0.00% of limit (26838785024)
++++ extrauserdata ++++
++++ cache ++++
creating cache.img...
BuildImage: in_dir = /tmp/tmpQp6j5q/cache, out_file = /tmp/tmpPUYQ9G
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpPUYQ9G 268435456
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 268435456 /tmp/tmpPUYQ9G
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 15.000%
Info: Overprovision segments = 35 (GC reserved = 21)
Running ['mkf2fsuserimg.sh', '/tmp/tmpPUYQ9G', '268435456'] command, exit code = 0
cache size (14) is 0.00% of limit (268435456)
done.
[ 99% 40911/40912] Package OTA: /run/m...kenzo/lineage_kenzo-ota-d4b338b746.zip
unzipping target target-files...
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-Rnr8Wy
--- target info ---
blockimgdiff_versions = (str) 1,2,3,4
blocksize = (int) 131072
boot_size = (int) 67108864
build.prop = (dict) {'persist.audio.dirac.speaker': 'true', 'ro.sys.sdcardfs': 'true', 'persist.audio.fluence.speaker': 'true', 'bluetooth.hfp.client': '1', 'audio.safx.pbe.enabled': 'true', 'dalvik.vm.isa.arm.variant': 'cortex-a53.a57', 'ro.product.cpu.abilist': 'arm64-v8a,armeabi-v7a,armeabi', 'debug.enable.sglscale': '1', 'ro.build.product': 'kenzo', 'persist.data.iwlan.enable': 'true', 'ro.build.id': 'NJH47F', 'ro.hwui.gradient_cache_size': '1', 'dalvik.vm.stack-trace-file': '/data/anr/traces.txt', 'ro.product.cpu.abilist32': 'armeabi-v7a,armeabi', 'ro.build.selinux': '1', 'ro.qc.sdk.audio.fluencetype': 'fluence', 'tunnel.audio.encode': 'false', 'ro.frp.pst': '/dev/block/bootdevice/by-name/config', 'af.fast_track_multiplier': '1', 'dalvik.vm.lockprof.threshold': '500', 'ro.build.fingerprint': 'Xiaomi/kenzo/kenzo:6.0.1/MMB29M/V8.2.1.0.MHOCNDL:user/release-keys', 'ro.product.manufacturer': 'Xiaomi', 'dalvik.vm.isa.arm64.features': 'default', 'audio.offload.pcm.24bit.enable': 'false', 'persist.radio.cs_srv_type': '1', 'ro.hwui.layer_cache_size': '48', 'ro.build.description': 'kenzo-user 6.0.1 MMB29M V8.2.1.0.MHOCNDL release-keys', 'ro.bootimage.build.fingerprint': 'Xiaomi/lineage_kenzo/kenzo:7.1.2/NJH47F/d4b338b746:userdebug/test-keys', 'ro.product.cpu.abi': 'arm64-v8a', 'ro.sys.fw.dex2oat_thread_count': '4', 'ro.product.brand': 'Xiaomi', 'wifi.interface': 'wlan0', 'ro.cm.build.version.plat.sdk': '7', 'ro.product.model': 'Redmi Note 3', 'persist.radio.redir_party_num': '0', 'media.camera.ts.monotonic': '1', 'ro.cmlegal.url': 'https://lineageos.org/legal', 'persist.audio.fluence.voicecall': 'true', 'persist.cne.feature': '1', 'media.msm8956hw': '1', 'audio.offload.multiple.enabled': 'false', 'persist.demo.hdmirotationlock': 'false', 'ro.build.host': 'skynet', 'ro.build.version.security_patch': '2017-08-05', 'telephony.lteOnCdmaDevice': '1', 'media.sf.extractor-plugin': 'libffmpeg_extractor.so', 'ro.product.locale': 'en-US', 'audio.offload.min.duration.secs': '30', 'ro.btconfig.vendor': 'qcom', 'persist.audio.fluence.voicerec': 'true', 'audio.offload.video': 'false', 'dalvik.vm.isa.arm64.variant': 'generic', 'mmp.enable.3g2': 'true', 'persist.radio.NO_STAPA': '1', 'persist.hwc.downscale_threshold': '1.15', 'persist.sys.dalvik.vm.lib.2': 'libart.so', 'persist.loc.nlp_name': 'com.qualcomm.location', 'ro.board.platform': 'msm8952', 'voice.playback.conc.disabled': 'true', 'persist.data.qmi.adb_logmask': '0', 'ro.product.cpu.abilist64': 'arm64-v8a', 'audio.playback.mch.downsample': 'true', 'net.tcp.2g_init_rwnd': '10', 'ro.vendor.extension_library': 'libqti-perfd-client.so', 'persist.radio.multisim.config': 'dsds', 'persist.rild.nitz_long_ons_3': '', 'persist.rild.nitz_long_ons_2': '', 'persist.rild.nitz_long_ons_1': '', 'persist.rild.nitz_long_ons_0': '', 'ro.build.flavor': 'lineage_kenzo-userdebug', 'dalvik.vm.isa.arm.features': 'default', 'audio.deep_buffer.media': 'true', 'rild.libargs': '-d /dev/smd0', 'ro.gps.agps_provider': '1', 'persist.rild.nitz_short_ons_0': '', 'ro.build.version.release': '7.1.2', 'ro.build.version.codename': 'REL', 'DEVICE_PROVISIONED': '1', 'audio.offload.disable': '1', 'net.bt.name': 'Android', 'persist.data.netmgrd.qos.enable': 'true', 'ro.hwui.text_large_cache_width': '2048', 'persist.audio.fluence.audiorec': 'false', 'persist.radio.VT_HYBRID_ENABLE': '1', 'ro.opengles.version': '196610', 'use.voice.path.for.pcm.voip': 'true', 'persist.rild.nitz_plmn': '', 'ro.hwui.text_small_cache_height': '1024', 'ro.build.display.id': 'lineage_kenzo-userdebug 7.1.2 NJH47F d4b338b746 test-keys', 'audio.offload.pcm.16bit.enable': 'false', 'persist.radio.hw_mbn_update': '0', 'ro.config.ringtone': 'Orion.ogg', 'persist.radio.force_on_dc': 'true', 'persist.gps.qc_nlp_in_use': '1', 'debug.egl.hw': '0', 'ro.storage_manager.enabled': 'true', 'ro.carrier': 'unknown', 'ro.product.board': 'msm8952', 'ro.build.version.preview_sdk': '0', 'ro.com.google.clientidbase': 'android-xiaomi', 'persist.radio.start_ota_daemon': '1', 'ro.cm.build.version.plat.rev': '0', 'persist.timed.enable': 'true', 'ro.build.date': 'Tue Aug 22 13:26:20 IST 2017', 'ro.use_data_netmgrd': 'true', 'persist.radio.sib16_support': '1', 'qcom.bluetooth.soc': 'smd', 'ro.build.date.utc': '1503388580', 'audio.offload.buffer.size.kb': '64', 'keyguard.no_require_sim': 'true', 'ro.qc.sdk.audio.ssr': 'false', 'voice.conc.fallbackpath': 'deep-buffer', 'persist.dpm.feature': '5', 'ro.cm.display.version': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.version.all_codenames': 'REL', 'mm.enable.smoothstreaming': 'true', 'ro.btconfig.if': 'smd', 'persist.dbg.vt_avail_ovr': '1', 'dev.pm.dyn_samplingrate': '1', 'ro.build.type': 'userdebug', 'ro.hwui.text_small_cache_width': '1024', 'voice.record.conc.disabled': 'false', 'ro.cm.version': '14.1-20170822-UNOFFICIAL-kenzo', 'persist.radio.sw_mbn_update': '0', 'ro.product.name': 'lineage_kenzo', 'ro.hwui.drop_shadow_cache_size': '6', 'ro.build.version.base_os': '', 'ro.telephony.call_ring.multiple': 'false', 'voice.voip.conc.disabled': 'true', 'persist.data.mode': 'concurrent', 'media.sf.omx-plugin': 'libffmpeg_omx.so', 'ro.expect.recovery_id': '0x22ab51ee62435272df9ab420618c4be9c94727ed000000000000000000000000', 'ro.telephony.default_network': '22,20', 'ro.wifi.channels': '', 'ro.hwui.r_buffer_cache_size': '8', 'persist.camera.HAL3.enabled': '1', 'ro.modversion': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.characteristics': 'default', 'debug.mdpcomp.logs': '0', 'audio.offload.gapless.enabled': 'true', 'ro.build.version.incremental': 'd4b338b746', 'ro.config.alarm_alert': 'Hassium.ogg', 'ro.hwui.text_large_cache_height': '1024', 'rild.libpath': '/vendor/lib64/libril-qc-qmi-1.so', 'ro.build.tags': 'test-keys', 'ro.sf.lcd_density': '480', 'ro.build.version.sdk': '25', 'ro.cm.releasetype': 'UNOFFICIAL', 'audio.dolby.ds2.enabled': 'true', 'persist.audio.fluence.spk.mono': 'true', 'ril.subscription.types': 'RUIM', 'persist.dpm.nsrm.bkg.evt': '3955', 'ro.build.user': 'vinayak', 'persist.dbg.volte_avail_ovr': '1', 'ro.hwui.path_cache_size': '32', 'ro.product.device': 'kenzo', 'debug.sf.hw': '0', 'persist.rild.nitz_short_ons_1': '', 'persist.rild.nitz_short_ons_2': '', 'persist.rild.nitz_short_ons_3': '', 'persist.radio.rat_on': 'combine', 'ro.btconfig.dev': '/dev/smd3', 'ro.hwui.texture_cache_flushrate': '0.4', 'ro.hwui.texture_cache_size': '72', 'ro.cm.device': 'kenzo', 'audio_hal.period_size': '192', 'ro.btconfig.chip': 'WCN3680', 'ro.telephony.default_cdma_sub': '0', 'persist.radio.apm_sim_not_pwdn': '1', 'persist.hwc.mdpcomp.enable': 'true', 'persist.radio.custom_ecc': '1', 'persist.sys.dun.override': '0', 'ro.config.notification_sound': 'Argon.ogg', 'audio.offload.track.enable': 'false', 'media.aac_51_output_enabled': 'true'}
cache_fs_type = (str) ext4
cache_size = (int) 268435456
default_system_dev_certificate = (str) build/target/product/security/testkey
device_type = (str) MMC
extfs_sparse_flag = (str) -s
extra_recovery_keys = (str) vendor/cm/build/target/product/security/lineage
fs_type = (str) ext4
fstab = (dict) {'/cache': <common.Partition object at 0x7f2d76e445d0>, '/boot': <common.Partition object at 0x7f2d76e44050>, '/system': <common.Partition object at 0x7f2d76e44950>, '/dsp': <common.Partition object at 0x7f2d76e44210>, '/frp': <common.Partition object at 0x7f2d76e44110>, '/persist': <common.Partition object at 0x7f2d76e44810>, '/recovery': <common.Partition object at 0x7f2d76e44750>, '/firmware': <common.Partition object at 0x7f2d76e44610>, '/data': <common.Partition object at 0x7f2d76e44550>, '/misc': <common.Partition object at 0x7f2d76e44790>}
fstab_version = (int) 2
mkbootimg_args = (str) --ramdisk_offset 0x01000000 --tags_offset 0x00000100
mkbootimg_version_args = (str) --os_version 7.1.2 --os_patch_level 2017-08-05
multistage_support = (str) 1
ota_override_device = (str) kate,kenzo
recovery_api_version = (int) 3
recovery_as_boot = (str)
recovery_mount_options = (str) ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc
recovery_size = (int) 67108864
selinux_fc = (str) /tmp/targetfiles-Rnr8Wy/META/file_contexts.bin
squashfs_sparse_flag = (str) -s
system_size = (int) 2684354560
tool_extensions = (str) device/xiaomi/kenzo/../common
update_rename_support = (str) 1
use_set_metadata = (str) 1
userdata_size = (int) 26838785024
unable to load device-specific module; assuming none
using prebuilt recovery.img from BOOTABLE_IMAGES...
using system.img from target-files
Total of 655360 4096-byte output blocks in 6263 input chunks.
Finding transfers...
Generating digraph...
Finding vertex sequence...
Reversing backward edges...
0/0 dependencies (0.00%) were violated; 0 source blocks stashed.
Improving vertex order...
Revising stash size...
Total 0 blocks (0 bytes) are packed as new blocks due to insufficient cache size.
Reticulating splines...
1156825088 1156825088 (100.00%) new __DATA
max stashed blocks: 0 (0 bytes), limit: 214748364 bytes (0.00%)
using prebuilt boot.img from BOOTABLE_IMAGES...
boot size (10713088) is 15.96% of limit (67108864)
running: openssl pkcs8 -in build/target/product/security/testkey.pk8 -inform DER -nocrypt
running: java -Xmx2048m -Djava.library.path=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/lib64 -jar /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/framework/signapk.jar -w build/target/product/security/testkey.x509.pem build/target/product/security/testkey.pk8 /tmp/tmpOsziEC /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage_kenzo-ota-d4b338b746.zip
done.
[100% 40912/40912] build bacon
Package Complete: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage-14.1-20170822-UNOFFICIAL-kenzo.zip
make: Leaving directory '/run/media/vinayak/6FA49F144DC575A7/android/lineage'
#### make completed successfully (04:59:23 (hh:mm:ss)) ####
va6996 said:
I recently started with building LineageOS. However, I see that ccache isn't working for me for some reason. The ccache directory size is just 56MB. The build takes the same amount of time ~5hr(on my laptop). I've even set the cache size as 70GB. However, my out directory is 55.7GB. What am I doing wrong?...
Click to expand...
Click to collapse
Your better off posting your question on the following Official LineageOS thread for your device.
http://forum.xda-developers.com/showthread.php?t=3542491
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
We all know that there are two types of file encryption, one is called "wipe" and the other is "inplace". I have a project and I have to test how to use wipe to encrypt.
So I had a test about the ‘wipe’ encryption in pure lineageOS14.1 but unfortunately it failed. Here are my steps:*
1. Change the parameter "forcefdeorfbe" to "encryptable" in file fstab.angler then recompile the lineage source code to disable the forced encryption in Google Nexus 6P*
2. Get the root of the Nexus 6P (su root)*
3. Type the command in adb:
vdc cryptfs enablecrypto wipe password qwer
to use ‘wipe’ to delete all the files and then encrypt the system with the password set to ‘qwer’.*
Then my cell phone restarted without the encryption that I had expected, here is my log of that error:
02-05 06:22:00.701 370 3185 I Cryptfs : Enabling support for allow_discards in dmcrypt.*
02-05 06:22:00.701 370 3185 I Cryptfs : target_type = crypt*
02-05 06:22:00.701 370 3185 I Cryptfs : real_blk_name = /dev/block/platform/soc.0/f9824900.sdhci/by-name/userdata, extra_params = 1 allow_discards*
02-05 06:22:05.740 370 3185 E Cryptfs : Cannot load dm-crypt mapping table.*
02-05 06:22:05.741 370 3185 I Cryptfs : Making empty filesystem with command /system/bin/make_ext4fs -a /data -l 58688269824 /dev/block/dm-0*
02-05 06:22:05.811 370 3185 I make_ext4fs: SELinux: Loaded file_contexts contexts from /file_contexts.bin.*
02-05 06:22:05.812 370 3185 I make_ext4fs: Creating filesystem with parameters:*
02-05 06:22:05.812 370 3185 I make_ext4fs: Size: 58688266240*
02-05 06:22:05.812 370 3185 I make_ext4fs: Block size: 4096*
02-05 06:22:05.812 370 3185 I make_ext4fs: Blocks per group: 32768*
02-05 06:22:05.812 370 3185 I make_ext4fs: Inodes per group: 8192*
02-05 06:22:05.812 370 3185 I make_ext4fs: Inode size: 256*
02-05 06:22:05.812 370 3185 I make_ext4fs: Journal blocks: 32768*
02-05 06:22:05.812 370 3185 I make_ext4fs: Label:*
02-05 06:22:05.812 370 3185 I make_ext4fs: Blocks: 14328190*
02-05 06:22:05.812 370 3185 I make_ext4fs: Block groups: 438*
02-05 06:22:05.812 370 3185 I make_ext4fs: Reserved block group size: 1024*
02-05 06:22:05.826 370 3185 I make_ext4fs: Created filesystem with 11/3588096 inodes and 271280/14328190 blocks*
02-05 06:22:05.826 370 3185 I make_ext4fs: error: file_write: write: No space left on device*
02-05 06:22:05.830 370 3185 D Cryptfs : Successfully created filesystem on /dev/block/dm-0*
I read the function called cryptfs_enable_internal in the file cryptfs.c and there is a variable called "no_ui", it seems that this variable separated the process of encryption into two parts: the preparation before reboot and the real encryption after reboot. Although I don't think this variable should be used in this command when I want to use the ‘wipe’ command to wipe the cell phone and encrypt the cell phone. However, I still tried this:*
vdc cryptfs enablecrypto wipe password qwer noui*
The cell phone warned me that the data was corrupted and must have a factory reset.*
So now I can only use "inplace" to encryt my cell phone, could you please give me some ideas about:*
Is there anything wrong with my steps that makes the ‘wipe’ encryption never successful on my phone?
i have a teclast M20 4G M3K4 and I would like to root it found a link on the internet that explains how to do this would like your opinions
canot post link because i have no rights
AIDA64 for Android v1.66 Repo
<<< System >>>
Device Model: Teclast M20 4G
Device Type: Tablet
Manufacturer: techain
Model: M20_4G
Brand: Teclast
Board: mt6797
Device: M20_4G
Hardware: mt6797
Platform: mt6797
Product: M20_4G
Installed RAM: 4 GB LPDDR3
Total Memory: 3682 MB
Available Memory: 1887 MB
Internal Storage Total Space: 53.43 GB
Internal Storage Free Space: 49.40 GB
External Storage Total Space: 29.80 GB
External Storage Free Space: 21.95 GB
Bluetooth Version: 4.0
Device Features: android.hardware.audio.low_latency
android.hardware.audio.output
android.hardware.bluetooth
android.hardware.bluetooth_le
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.autofocus
android.hardware.camera.front
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.opengles.aep
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.telephony
android.hardware.telephony.cdma
android.hardware.telephony.gsm
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.vulkan.level
android.hardware.vulkan.version
android.hardware.wifi
android.hardware.wifi.direct
android.software.activities_on_secondary_displays
android.software.app_widgets
android.software.autofill
android.software.backup
android.software.companion_device_setup
android.software.connectionservice
android.software.cts
android.software.device_admin
android.software.home_screen
android.software.input_methods
android.software.live_wallpaper
android.software.managed_users
android.software.midi
android.software.picture_in_picture
android.software.print
android.software.voice_recognizers
android.software.webview
<<< CPU >>>
SoC Model: MediaTek Helio X20 (MT6797)
Core Architecture: 4x ARM Cortex-A53 @ 1391 MHz
4x ARM Cortex-A53
2x ARM Cortex-A72
Manufacturing Process: 20 nm
Instruction Set: 64-bit ARMv8-A
CPU Revision: r0p1
CPU Cores: 10
CPU Clock Range: 221 - 1391 MHz
Core 1 Clock: 1118 MHz
Core 2 Clock: 1118 MHz
Core 3 Clock: 1118 MHz
Core 4 Clock: (sleeping)
Core 5 Clock: (sleeping)
Core 6 Clock: (sleeping)
Core 7 Clock: (sleeping)
Core 8 Clock: (sleeping)
Core 9 Clock: (sleeping)
Core 10 Clock: (sleeping)
Scaling Governor: interactive
Supported ABIs: arm64-v8a, armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
Supported 64-bit ABIs: arm64-v8a
AES: Supported
NEON: Supported
SHA1: Supported
SHA2: Supported
<<< Display >>>
Screen Resolution: 2560 × 1600
Technology: IPS LCD
Screen Size: 218 mm × 136 mm
Screen Diagonal: 10.1 inches
Pixel Density: 299 dpi (xhdpi)
xdpi / ydpi: 320 / 320 dpi
GPU Vendor: ARM
GPU Renderer: Mali-T880
Refresh Rate: 57 Hz
Default Orientation: Landscape
OpenGL ES Version: 3.2
GPU Version: OpenGL ES 3.2 v1.r20p0-01rel0.d174d1328b67c542941eec67baa38e6a
OpenGL ES Extensions: GL_EXT_debug_marker
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth24
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_OES_packed_depth_stencil
GL_OES_rgb8_rgba8
GL_EXT_read_format_bgra
GL_OES_compressed_paletted_texture
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_image_external_essl3
GL_OES_EGL_sync
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_required_internalformat
GL_OES_vertex_array_object
GL_OES_mapbuffer
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_rg
GL_EXT_texture_type_2_10_10_10_REV
GL_OES_fbo_render_mipmap
GL_OES_element_index_uint
GL_EXT_shadow_samplers
GL_OES_texture_compression_astc
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_KHR_texture_compression_astc_sliced_3d
GL_KHR_debug
GL_EXT_occlusion_query_boolean
GL_EXT_disjoint_timer_query
GL_EXT_blend_minmax
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_OES_texture_3D
GL_EXT_texture_storage
GL_EXT_multisampled_render_to_texture
GL_OES_surfaceless_context
GL_OES_texture_stencil8
GL_EXT_shader_pixel_local_storage
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_ARM_mali_program_binary
GL_EXT_sRGB
GL_EXT_sRGB_write_control
GL_EXT_texture_sRGB_decode
GL_EXT_texture_sRGB_R8
GL_EXT_texture_sRGB_RG8
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_OES_texture_storage_multisample_2d_array
GL_OES_shader_image_atomic
GL_EXT_robustness
GL_EXT_draw_buffers_indexed
GL_OES_draw_buffers_indexed
GL_EXT_texture_border_clamp
GL_OES_texture_border_clamp
GL_EXT_texture_cube_map_array
GL_OES_texture_cube_map_array
GL_OES_sample_variables
GL_OES_sample_shading
GL_OES_shader_multisample_interpolation
GL_EXT_shader_io_blocks
GL_OES_shader_io_blocks
GL_EXT_tessellation_shader
GL_OES_tessellation_shader
GL_EXT_primitive_bounding_box
GL_OES_primitive_bounding_box
GL_EXT_geometry_shader
GL_OES_geometry_shader
GL_ANDROID_extension_pack_es31a
GL_EXT_gpu_shader5
GL_OES_gpu_shader5
GL_EXT_texture_buffer
GL_OES_texture_buffer
GL_EXT_copy_image
GL_OES_copy_image
GL_EXT_shader_non_constant_global_initializers
GL_EXT_color_buffer_half_float
GL_EXT_color_buffer_float
GL_EXT_YUV_target
GL_OVR_multiview
GL_OVR_multiview2
GL_OVR_multiview_multisampled_render_to_texture
GL_KHR_robustness
GL_KHR_robust_buffer_access_behavior
GL_EXT_draw_elements_base_vertex
GL_OES_draw_elements_base_vertex
<<< Network >>>
<< Telephony >>
Phone Type: GSM
Network Operator Name: Oi
Network Operator Code: 72431
Network Operator Country: Brazil
SIM Provider Name: Oi
SIM Provider Code: 72431
SIM Provider Country: Brazil
SIM State: Ready
Network Type: EDGE
Data Connection State: Disconnected
Data Activity: None
Device Is Roaming: No
ICC Card: Present
<< Wi-Fi >>
State: Enabled
SSID: "casa1"
BSSID: ec:08:6b:e0:3e:e7
Hidden SSID: No
IPv4 Address: 192.168.1.102
IPv6 Address: fe80::200:3ff:fe22:28f9
Signal Strength: -70 dBm (Good)
Link Speed: 52 Mbps
Frequency: 2457 MHz
Network ID: 0
Gateway: 192.168.1.1
Netmask: 255.255.255.0
DNS1: 8.8.8.8
DNS2: 8.8.4.4
DHCP Lease Duration: 24 hours
5 GHz Band: Supported
Wi-Fi Aware: Not Supported
Wi-Fi Direct: Supported
<<< Battery >>>
Power Source: Battery
Level: 50 %
Status: Not Charging
Health: Good
Technology: Li-ion
Temperature: 25.0°C
Voltage: 3.765 V
Charge Counter: 6400 mAh
Discharge Rate: 533 mA
Capacity: 6600 mAh
<<< Android >>>
Android Version: 8.0.0 (Oreo)
API Level: 26
Android Security Patch Level: 2018-06-05
Rooted Device: No
Android ID: b640aeefa323aa7e
Baseband: MOLY.LR11.W1630.MD.MP.V67.2, 2018/04/02 17:50
Build ID: V1.02_20190223
Codename: REL
Fingerprint: CHUWI/Hi9Air/Hi9Air:8.0.0/O00623/1520042099:user/release-keys
ID: O00623
Incremental: 1520042099
Java Runtime Version: Android Runtime 0.9
Java VM Version: ART 2.1.0
Java VM Heap Size: 384 MB
Kernel Architecture: aarch64
Kernel Version: 3.18.60
Tags: release-keys
Type: user
Google Play Services Version: 19.6.29 (040406-278422107)
Huawei Mobile Services Version: < Not Present >
OpenSSL Version: OpenSSL 1.0.2 (compatible; BoringSSL)
ZLib Version: 1.2.8
ICU CLDR Version: 30.0.3
ICU Library Version: 58.2
ICU Unicode Version: 9.0
Android Language: English (United States)
Configured Time Zone: Brasilia Standard Time (UTC-03:00)
UpTime: 01:08:50
<<< Devices >>>
<< Rear-Facing Camera >>
Resolution: 5.0 MP (2592 × 1944)
Focal Length: 3.50 mm
Focus Modes: auto, macro, infinity, continuous-picture, continuous-video
Video Stabilization: Supported
Zoom: Supported
Auto Exposure Locking: Supported
Auto White Balance Locking: Supported
Flash: Not Supported
<< Front-Facing Camera >>
Resolution: 2.1 MP (1920 × 1088)
Focal Length: 3.50 mm
Focus Modes: fixed, infinity
Video Stabilization: Supported
Zoom: Supported
Auto Exposure Locking: Supported
Auto White Balance Locking: Supported
Flash: Not Supported
<< Vulkan Device - Mali-T880 >>
Device Name: Mali-T880
Device Type: Integrated GPU
Device UUID: C5-18-34-CB-95-43-3E-BE-3B-53-73-BF-A4-4B-EC-E2
Device ID: 000013B5-08801008
Memory Size: 3768076 KB
Max 1D Image Size: 8192
Max 2D Image Size: 8192 x 8192
Max 3D Image Size: 4096 x 4096 x 4096
Max Cube Image Size: 8192 x 8192
Max Image Layers: 256
Max Texel Buffer Elements: 65536
Max Uniform Buffer Range: 65536
Max Storage Buffer Range: 134217728
Max Push Constants Size: 128 bytes
Buffer Image Granularity: 4 KB
Max Bound Descriptor Sets: 4
Max Per-Stage Descriptor Samplers: 128
Max Per-Stage Descriptor Uniform Buffers: 12
Max Per-Stage Descriptor Storage Buffers: 4
Max Per-Stage Descriptor Sampled Images: 16
Max Per-Stage Descriptor Storage Images: 4
Max Per-Stage Descriptor Input Attachments: 4
Max Per-Stage Resources: 44
Max Descriptor Set Samplers: 768
Max Descriptor Set Uniform Buffers: 72
Max Descriptor Set Dynamic Uniform Buffers: 8
Max Descriptor Set Storage Buffers: 24
Max Descriptor Set Dynamic Storage Buffers: 4
Max Descriptor Set Sampled Images: 96
Max Descriptor Set Storage Images: 24
Max Descriptor Set Input Attachments: 4
Max Vertex Input Attributes: 16
Max Vertex Input Bindings: 16
MaxVertex Input Attribute Offset: 2047
Max Vertex Input Binding Stride: 2048
Max Vertex Output Components: 128
Max Tesselation Generation Level: 64
Max Tesselation Patch Size: 32
Max Tesselation Control Per-Vertex Input Components: 64
Max Tesselation Control Per-Vertex Output Components: 64
Max Tesselation Control Per-Patch Output Components: 120
Max Tesselation Control Total Output Components: 2048
Max Tesselation Evaluation Input Components: 64
Max Tesselation Evaluation Output Components: 64
Max Geometry Shader Invocations: 32
Max Geometry Input Components: 64
Max Geometry Output Components: 128
Max Geometry Output Vertices: 256
Max Geometry Total Output Components: 1024
Max Fragment Input Components: 128
Max Fragment Output Attachments: 4
Max Fragment Combined Output Resources: 12
Max Compute Shared Memory Size: 32 KB
Max Compute Work Group Count: X: 65536, Y: 65536, Z: 65536
Max Compute Work Group Invocations: 256
Max Compute Work Group Size: X: 256, Y: 256, Z: 256
Subpixel Precision Bits: 8
Subtexel Precision Bits: 8
Mipmap Precision Bits: 8
Max Draw Indexed Index Value: 4294967295
Max Draw Indirect Count: 1
Max Sampler LOD Bias: 2.000000
Max Sampler Anisotropy: 1.000000
Max Viewports: 1
Max Viewport Size: 8192 x 8192
Viewport Bounds Range: -16384.000000 ... 16383.000000
Min Memory Map Alignment: 64 bytes
Min Texel Buffer Offset Alignment: 256 bytes
Min Uniform Buffer Offset Alignment: 16 bytes
Min Storage Buffer Offset Alignment: 256 bytes
Min / Max Texel Offset: -8 / 7
Min / Max Texel Gather Offset: -8 / 7
Min / Max Interpolation Offset: -0.500000 / 0.500000
Subpixel Interpolation Offset Bits: 4
Max Framebuffer Size: 8192 x 8192
Max Framebuffer Layers: 256
Framebuffer Color Sample Counts: 0x00000005
Framebuffer Depth Sample Counts: 0x00000005
Framebuffer Stencil Sample Counts: 0x00000005
Framebuffer No Attachments Sample Counts: 0x00000005
Max Color Attachments: 4
Sampled Image Color Sample Counts: 0x00000005
Sampled Image Integer Sample Counts: 0x00000001
Sampled Image Depth Sample Counts: 0x00000005
Sampled Image Stencil Sample Counts: 0x00000005
Storage Image Sample Counts: 0x00000001
Max Sample Mask Words: 1
Discrete Queue Priorities: 2
Point Size Range: 1.000000 ... 1024.000000
Line Width Range: 1.000000 ... 1.000000
Point Size Granularity: 0.062500
Optimal Buffer Copy Offset Alignment: 64 bytes
Optimal Buffer Copy Row Pitch Alignment: 64 bytes
Non-Coherent Atom Size: 64 bytes
Driver Version: 313.546.569
API Version: 1.0.52
Vulkan Library: /system/lib64/libvulkan.so
Alpha To One: Not Supported
Anisotropic Filtering: Not Supported
ASTC LDR Texture Compression: Supported
BC Texture Compression: Not Supported
Depth Bias Clamping: Supported
Depth Bounds Tests: Not Supported
Depth Clamping: Not Supported
Draw Indirect First Instance: Supported
Dual Source Blend Operations: Not Supported
ETC2 and EAC Texture Compression: Supported
Fragment Stores and Atomics: Supported
Full Draw Index Uint32: Supported
Geometry Shader: Supported
Image Cube Array: Supported
Independent Blend: Supported
Inherited Queries: Not Supported
Large Points: Supported
Logic Operations: Not Supported
Multi-Draw Indirect: Not Supported
Multi Viewport: Not Supported
Occlusion Query Precise: Supported
Pipeline Statistics Query: Not Supported
Point and Wireframe Fill Modes: Not Supported
Robust Buffer Access: Supported
Sample Rate Shading: Supported
Shader Clip Distance: Not Supported
Shader Cull Distance: Not Supported
Shader Float64: Not Supported
Shader Image Gather Extended: Supported
Shader Int16: Supported
Shader Int64: Not Supported
Shader Resource Min LOD: Not Supported
Shader Resource Residency: Not Supported
Shader Sampled Image Array Dynamic Indexing: Supported
Shader Storage Buffer Array Dynamic Indexing: Supported
Shader Storage Image Array Dynamic Indexing: Supported
Shader Storage Image Extended Formats: Not Supported
Shader Storage Image Multisample: Not Supported
Shader Storage Image Read Without Format: Supported
Shader Storage Image Write Without Format: Supported
Shader Tesselation and Geometry Point Size: Not Supported
Shader Uniform Buffer Array Dynamic Indexing: Supported
Sparse Binding: Not Supported
Sparse Residency 2 Samples: Not Supported
Sparse Residency 4 Samples: Not Supported
Sparse Residency 8 Samples: Not Supported
Sparse Residency 16 Samples: Not Supported
Sparse Residency Aliased: Not Supported
Sparse Residency Aligned Mip Size: No
Sparse Residency Buffer: Not Supported
Sparse Residency Image 2D: Not Supported
Sparse Residency Image 3D: Not Supported
Sparse Residency Non-Resident Strict: No
Sparse Residency Standard 2D Block Shape: No
Sparse Residency Standard 2D Multisample Block Shape: No
Sparse Residency Standard 3D Block Shape: No
Standard Sample Locations: Yes
Strict Line Rasterization: Yes
Tesselation Shader: Supported
Timestamps on All Graphics and Compute Queues: Not Supported
Variable Multisample Rate: Not Supported
Vertex Pipeline Stores and Atomics: Not Supported
Wide Lines: Not Supported
Device Extensions: VK_KHR_incremental_present
VK_GOOGLE_display_timing
VK_KHR_maintenance1
VK_KHR_shader_draw_parameters
VK_KHR_swapchain
Instance Extensions: VK_KHR_surface
VK_KHR_android_surface
VK_EXT_swapchain_colorspace
VK_KHR_get_surface_capabilities2
VK_EXT_debug_report
VK_KHR_get_physical_device_properties2
No USB devices found.
No OpenCL devices found.
No CUDA devices found.
No PCI devices found.
<<< Thermal >>>
Battery: 25.0°C
<<< Sensors >>>
ACCELEROMETER:
<<< Apps >>>
AIDA64: com.finalwire.aida64(v1.66)
AnimeDLR: net.android.adm(v6.0.1)
Dashlane: com.dashlane(v6.1946.2-arm64-v8a)
Firefox Nightly: org.mozilla.fenix.nightly(vNightly 191117 06:00)
Rastreador: app.rmayrink.Rastreador_de_Encomendas(v1.9.9)
TuneIn Radio Pro: radiotime.player(v23.2)
WhatsApp: com.whatsapp(v2.19.333)
<<< Codecs >>>
OMX.MTK.AUDIO.DECODER.MP3: audio/mpeg
OMX.MTK.AUDIO.DECODER.GSM: audio/gsm
OMX.MTK.AUDIO.DECODER.RAW: audio/raw
OMX.MTK.AUDIO.DECODER.G711.ALAW: audio/g711-alaw
OMX.MTK.AUDIO.DECODER.G711.MLAW: audio/g711-mlaw
OMX.MTK.AUDIO.DECODER.ADPCM.MS: audio/x-adpcm-ms
OMX.MTK.AUDIO.DECODER.ADPCM.DVI: audio/x-adpcm-dvi-ima
OMX.MTK.AUDIO.DECODER.APE: audio/ape
OMX.MTK.AUDIO.DECODER.ALAC: audio/alac
OMX.MTK.VIDEO.DECODER.HEVC: video/hevc
OMX.MTK.VIDEO.DECODER.MPEG4: video/mp4v-es
OMX.MTK.VIDEO.DECODER.H263: video/3gpp
OMX.MTK.VIDEO.DECODER.AVC: video/avc
OMX.MTK.VIDEO.DECODER.VPX: video/x-vnd.on2.vp8
OMX.MTK.VIDEO.DECODER.VP9: video/x-vnd.on2.vp9
OMX.MTK.VIDEO.DECODER.DIVX: video/divx
OMX.MTK.VIDEO.DECODER.DIVX3: video/divx3
OMX.MTK.VIDEO.DECODER.XVID: video/xvid
OMX.MTK.VIDEO.DECODER.VC1: video/x-ms-wmv
OMX.MTK.VIDEO.DECODER.MPEG2: video/mpeg2
OMX.MTK.VIDEO.ENCODER.MPEG4: video/mp4v-es
OMX.MTK.VIDEO.ENCODER.H263: video/3gpp
OMX.MTK.VIDEO.ENCODER.AVC: video/avc
OMX.MTK.VIDEO.ENCODER.HEVC: video/hevc
OMX.MTK.VIDEO.ENCODER.VPX: video/x-vnd.on2.vp8
OMX.google.mp3.decoder: audio/mpeg
OMX.google.amrnb.decoder: audio/3gpp
OMX.google.amrwb.decoder: audio/amr-wb
OMX.google.aac.decoder: audio/mp4a-latm
OMX.google.g711.alaw.decoder: audio/g711-alaw
OMX.google.g711.mlaw.decoder: audio/g711-mlaw
OMX.google.vorbis.decoder: audio/vorbis
OMX.google.opus.decoder: audio/opus
OMX.google.raw.decoder: audio/raw
OMX.google.aac.encoder: audio/mp4a-latm
OMX.google.amrnb.encoder: audio/3gpp
OMX.google.amrwb.encoder: audio/amr-wb
OMX.google.flac.encoder: audio/flac
OMX.google.mpeg4.decoder: video/mp4v-es
OMX.google.h263.decoder: video/3gpp
OMX.google.h264.decoder: video/avc
OMX.google.hevc.decoder: video/hevc
OMX.google.vp8.decoder: video/x-vnd.on2.vp8
OMX.google.vp9.decoder: video/x-vnd.on2.vp9
OMX.google.h263.encoder: video/3gpp
OMX.google.h264.encoder: video/avc
OMX.google.mpeg4.encoder: video/mp4v-es
OMX.google.vp8.encoder: video/x-vnd.on2.vp8
<<< Directories >>>
Data: /data
Root: /system
Java Home: /system
Download/Cache Content: /data/cache
<< External Storage >>
Primary External Storage: /storage/emulated/0
External Files #1: /storage/emulated/0/Android/data/com.finalwire.aida64/files
External Files #2: /storage/C2E0-1DEA/Android/data/com.finalwire.aida64/files
Alarms: /storage/emulated/0/Alarms
DCIM: /storage/emulated/0/DCIM
Downloads: /storage/emulated/0/Download
Movies: /storage/emulated/0/Movies
Music: /storage/emulated/0/Music
Notifications: /storage/emulated/0/Notifications
Pictures: /storage/emulated/0/Pictures
Podcasts: /storage/emulated/0/Podcasts
Ringtones: /storage/emulated/0/Ringtones
<< Mount Points >>
/: Device: rootfs
File System: rootfs
Read-Only
/dev: Device: tmpfs
File System: tmpfs
Read-Write
/dev/pts: Device: devpts
File System: devpts
Read-Write
/dev/cpuctl: Device: none
File System: cgroup
Read-Write
/dev/cpuset: Device: none
File System: cgroup
Read-Write
/dev/usb-ffs/adb: Device: adb
File System: functionfs
Read-Write
/proc: Device: proc
File System: proc
Read-Write
/sys: Device: sysfs
File System: sysfs
Read-Write
/sys/fs/selinux: Device: selinuxfs
File System: selinuxfs
Read-Write
/sys/kernel/debug: Device: debugfs
File System: debugfs
Read-Write
/sys/kernel/debug/tracing: Device: tracefs
File System: tracefs
Read-Write
/sys/fs/pstore: Device: pstore
File System: pstore
Read-Write
/system: Device: /dev/block/dm-0
File System: ext4
Read-Only
/vendor: Device: /dev/block/dm-1
File System: ext4
Read-Only
/acct: Device: none
File System: cgroup
Read-Write
/mnt: Device: tmpfs
File System: tmpfs
Read-Write
/mnt/runtime/default/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/read/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/write/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/media_rw/C2E0-1DEA: Device: /dev/block/vold/public:179,129
File System: vfat
Read-Write
/mnt/runtime/default/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/mnt/runtime/read/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/mnt/runtime/write/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/config: Device: none
File System: configfs
Read-Write
/cache: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
File System: ext4
Read-Write
/protect_f: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
File System: ext4
Read-Write
/protect_s: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
File System: ext4
Read-Write
/nvdata: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
File System: ext4
Read-Write
/nvcfg: Device: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvcfg
File System: ext4
Read-Write
/data: Device: /dev/block/dm-2
File System: ext4
Read-Write
/storage: Device: tmpfs
File System: tmpfs
Read-Write
/storage/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/storage/C2E0-1DEA: Device: /mnt/media_rw/C2E0-1DEA
File System: sdcardfs
Read-Write
/storage/self: Device: tmpfs
File System: tmpfs
Read-Write
<<< System Files >>>
Buddy Info: /proc/buddyinfo
Build Properties: /system/build.prop
Character & Block Devices: /proc/devices
Command Line: /proc/cmdline
CPU Information: /proc/cpuinfo
Default Properties: /default.prop
Execution Domains: /proc/execdomains
File Systems: /proc/filesystems
Frame Buffer Devices: /proc/fb
Hosts: /system/etc/hosts
Interrupts: /proc/interrupts
Input Devices: /proc/bus/input/devices
I/O Ports: /proc/ioports
Kernel Version: /proc/version
Load Average: /proc/loadavg
Locked Files: /proc/locks
Memory Information: /proc/meminfo
Memory Map: /proc/iomem
Misc Drivers: /proc/misc
Partitions: /proc/partitions
Statistics: /proc/stat
Swap Spaces: /proc/swaps
serial number:SN811SN8112H184641652