Develop Bugs

[ROM] [8.x-9.x] Oreo/Pie BuildBot Central

Code:
[B][CENTER]/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/[/CENTER][/B]
So far there have been a few builders that have shared ROMs on telegram, but they haven't made their way to XDA. This will hopefully be a nice way to share them with everybody on the forums
Please note that the ROMs posted in this thread won't necessarily be supported by the builders; they might be buggy; they might not even be tested first!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD: Resurrection Remix v7 Pie by @jsbeyond​
HavocOS Pie 2.1 DOWNLOAD by @jsbeyond​
PixelExperience DOWNLOAD by @jsbeyond​
AEX - AospExtended Pie DOWNLOAD by @jsbeyond​Oreo DOWNLOAD by nithin840​
Cosmic-OS Oreo DOWNLOAD by nithin840​
ViperOS Oreo DOWNLOAD by jsbeyond​
Known issues :
Camera can be slow to load after bootup - Wait for the flashlight qs tile to activate, or reboot
Fingerprint sometimes fails to register - Retry a few times, or reboot if that fails
YOU TELL ME!
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps (pico gapps recommended)
Reboot
XDA:DevDB Information
Kiwi Buildbot Central, ROM for the Honor 5X
Contributors
coldhans, tenshi_xp, jsbeyond, nithin840
Source Code: https://github.com/kiwi-pie
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Official MM (non-VoLTE) firmware
Based On: AOSP
Version Information
Status: Beta
Stable Release Date: 2019-02-08
Created 2018-09-25
Last Updated 2019-03-03

Reserved
@jsbeyond's Master Mega Folder

Reserved

thnku so much.. this rom is working perfectly on my kiwi L21..

I dont know why, but if i flash this rom it stays in Bootmode (Boot-Logo), no restarts..
Prevous installed ROM was crDroid v4.6.1, and i've done a Clean-Flash...
Im also flashed a MM Stock ROM and tried to flash it again, but same thing, doesnt boot up..
crDroid v4.6.1 instead works just fine..

I can not flash this Rom
Error 7 on twrp
I had this Problem in all Oreo Roms

_xmarvinx_ said:
I can not flash this Rom
Error 7 on twrp
I had this Problem in all Oreo Roms
Click to expand...
Click to collapse
Did you update TWRP?

xxmicahoo said:
Did you update TWRP?
Click to expand...
Click to collapse
update ur twrp recovery using twrp app (only if mobile is rooted). then flash rom.. it will work.

Thanks for this, flashed without any issues, works perfectly

Peeps1513 said:
Thanks for this, flashed without any issues, works perfectly
Click to expand...
Click to collapse
No problem?

Poolam said:
No problem?
Click to expand...
Click to collapse
nothing so far

Hi, I've been trying this rom and it feels amazing, but when I send voice notes via WhatsApp or Messenger, the volume is too low. Is there any solution?

Running the Rom, Its great. Thanks to the OP :good:
It's just:
* No sound in Calls
* And in "about phone" the IMEI says Unknown, But SimCrads are functional
* Mobile Data doesn't go higher than 2G although the preferred network type is LTE
* Contacts are not read by apps [including "Phone (default dialer in Rom) & latest ver of WhatsApp (66.0.0.0.17 (125404728)) ]
* There was no default music player with the Rom
* Equalizer doesn't make any difference on audio output ( speaker & headphone)
What is the right root solution (except Magisk) for this Rom?
There is an app named "Shell" but it has no icon and no shortcut, what is it? (you can find it in battery optimization option)

Does dis rom becomes official.... @coldhans:highfive:

Bharath kumar 007 said:
Does dis rom becomes official.... @coldhans:highfive:
Click to expand...
Click to collapse
No, but I'll try to update it at least once more.
Edit: The ROM devs stopped updating the Oreo branch for this ROM after my latest build, so I won't be updating this anymore after all.
Edit 2: Just gonna use this thread for Pie. I don't plan to update this very much

thanks

LOL
Is it just me or is the boot animation amazing. I have used boot animations from the play store to get cool ones and this one beats all of them.

what big differences between ArrowOS Pie and this rom ?

nourpon said:
what big differences between ArrowOS Pie and this rom ?
Click to expand...
Click to collapse
Base is same. Just customization options I guess

Thanks..no problems for me...
Perfect.

Development [A11][OFFICIAL]Evolution X v5.9 for alioth/aliothin

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 5.9 for the POCO F3 [alioth]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM
What are our features?
- Just flash and check "The Evolver"
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
5. Flash the ROM (make sure you enable auto-installation of TWRP before flashing the ROM)
6. Reboot to Recovery
7. Format Data
8. Flash Magisk (Optional)
9. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to recovery
3. Flash the ROM (make sure you enable auto-installation of TWRP before flashing the ROM)
4. Reboot to Recovery
5. Flash Magisk (Optional)
6. Reboot to System and #KeepEvolving
Light Screenshots / Dark Screenshots / Download
Donate to me! / Official Chat / Device Support
​
Android OS version: 11.0_r39​
Security patch level: July 2021​
Build Author: DarkAngelGR​
Source Code: https://github.com/Evolution-X​
Kernel Source Code: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250​
ROM Developer: joeyhuab​

first!!!

μας εφαγε ο robert. φτου
----------
MOD EDIT: English Translation Below
robert ate us. Phew

arifqur said:
Nice
This build has Quantic kernel right
Click to expand...
Click to collapse
yes, as you can see at the link provided at the bottom of the thread

Hey everyone,
If you want to report any bugs or just drop to say a thanks, join my Telegram group and make sure you read the rules to avoid any issues.
Hope you enjoy Evolution X

Waited for this

Thanks for develop the rom.

Damn Finally!!! Thanks Mate!!!

the fast charging worked？

fastboot version? how can i flash through fastboot( on twrp it gives me errors)

Finally my favorite rom, thanks for bringing this to us!

caneduro said:
fastboot version? how can i flash through fastboot( on twrp it gives me errors)
Click to expand...
Click to collapse
reflashed the miui stable

omfg someone help me. Lmao. TWRP throwing out errors left and right. I've already unmounted all the partitions.

I think all rom with TWRP for alioth doesn't work.

anyone able to flash this one?
TWRP is throwing a fit every single time

Installed on POCO F3 (Alioth) without any issue.
I was on xiaomi.eu 12.5.4.
1/ Installed evolutionX zip
2/ Reboot recovery, format data
Worked fine.

Kokovitch said:
Installed on POCO F3 (Alioth) without any issue.
I was on xiaomi.eu 12.5.4.
1/ Installed evolutionX zip
2/ Reboot recovery, format data
Worked fine.
Click to expand...
Click to collapse
did you select format data, or factory reset? Any other option(s) I should check before flashing?

JustAnAverageGuy_19 said:
did you select format data, or factory reset? Any other option(s) I should check before flashing?
Click to expand...
Click to collapse
I did format data

Hey! Thx for the great work!
Everything good here, no problems on install.
For those with problems, I'll give you my feedback.
I was on evox UNOFFICIAL, so, I follow the instructions given by the OFFICIAL dev.
These instructions could help also those coming from other ROMS, except hentaiOS and Proton.
Download TWRP vasi version and ROM. Be sure to transfer the ROM to your device.
1)Install TWRP, the vasi version.
Just download the .img in your PC, and enter in fastboot mode on your alioth.
Be sure that your device is recognized with the command
Code:
fastboot devices
If it's on the list, you can do the next command
Code:
fastboot boot TWRP_FILE_NAME.img
Very important that the TWRP downloaded file is in the same directory as the platform tools.
Once you executed the command, your alioth should auto boot into TWRP.
First step completed!!
2)Once you are in TWRP, by default my slot is A, you can check it on the REBOOT tab.
So, go to INSTALL, and find the ROM zip previously transfered to the device.
There are 4 checkbox, 2 already checked. If the INJECT TWRP is already checked, you are fine.
Now flash the ROM. Ignore the error messages. And when it finishes, reboot to TWRP, not system.
Second step completed!
3) Once you are in TWRP again, go to WIPE, and select FORMAT DATA.
Type "yes" and continue.
If there are error messages, IGNORE IT and REBOOT TO SYSTEM.
These are the steps I follow. I don't use Magisk, so I can't give you help on that.
It takes me less than a minute to boot into the system, so, I hope it helps anyone coming from EVOX UNOFFICIAL.

So, as I said in another thread, I'm coming from the UNOFFICIAL version, which was good in general terms, but AOD and pocket detection were battery killer, and I like those features. So I'll try this features in this version for some days until the battery adapts to my rutine, and then I'll give my feedback on it. Also, if you don't use 5g, remember to disable, it's a battery killer too xD

[Discontinued][ROM][11.0][UNOFFICIAL][Vanilla & GApps]Spark OS v8.x Sofiar

Discontinued as of 2021-12-01
Their android 11 builds are now EOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Spark OS v8.x
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​AOSP based rom with customization focused on stability and most of all smoothness.​
What works?
Almost everything
What's broken?
- OTA updater seems to fail at installing the update
- FM Radio doesn't work
- Editing the overlay is hit or miss, sometimes it works other times it removes the overlay
- Miracasting
- Stylus actions dies between reboots, just open it within settings
- Stylus actions are kinda buggy
First Time Installation
Reboot to recovery
Wipe data, cache, and dalvik if coming from another ROM
Flash ROM zip
(optional) Flash GApps (for vanilla builds)
(optional) Flash Magisk (root)
Format data
Reboot and voila!
Upgrading to a Newer Build
Reboot to recovery
Flash ROM zip (The update downloaded by the ota updater will be located in /data/ota_package)
(optional) Flash Magisk (root)
Reboot and voila!
ROM Download
Vache's TWRP Recovery
Magisk
FlameGApps
Spark OS Website
Spark OS Source
Device Build Info
Bug Reporting
Join the Spark Telegram channel : https://t.me/SparkOSCommunity​
Known Issues
• FM Radio doesn't work
• USB tethering doesn't work on first boot
• Must use android 10 vendor like other sofiar roms
• Android Auto doesn't work on android 10 vendor
• Miracasting doesn't work
• Stylus actions dies between reboots, just open it within settings
Spark OS, ROM for Rav/Sofia-R-P(commonly shortened to sofiar)
Devices: Sofiap (Moto G Stylus/G Pro), Sofia/Sofiar (Moto G Power/G⁸ Power), and Rav (Moto G⁸/G Fast)
Maintainer: ph4n70m
Build Type: Unofficial
Credits
- Vache: The initial device and vendor tree
- Beetle84: Giving me a ton of help

Going to give this one a try in the next day or so.

I have the Moto G Stylus (SofiaP) if i want flash this rom, i don't have problem if stay in Android 11?

Osorio1798 said:
I have the Moto G Stylus (SofiaP) if i want flash this rom, i don't have problem if stay in Android 11?
Click to expand...
Click to collapse
You will need to downgrade to 10.

Beetle84 said:
You will need to downgrade to 10.
Click to expand...
Click to collapse
If i install stock rom android 10 from TWRP, maybe work?

I dont think so @Osorio1798

We on device moto g stylus 2021 have nada in the rom/GSI department. Do you think this will work or a chance for you developers to get one together
Thank you kindly.

Osorio1798 said:
If i install stock rom android 10 from TWRP, maybe work?
Click to expand...
Click to collapse
Nah you gotta flash full stock android 10. Your best bet is using the vache moto flash tool because it also adds the vendor fix.

I'm probably just a huge idiot, but I can't seem to get this working for my Moto G Stylus/Pro. I used this unofficial TWRP build and followed the exact steps above, trying to flash the GApps build, then the vanilla build. It shows the Android One splash screen for a few seconds then reboots to the bootloader. And yes I did flash the stock Android 10 firmware previously.
Edit: I was able to boot it by extracting payload.bin and flashing in fastbootd mode

Loving it so far, with the exception of only seeing half of my battery icon. Oh well no worries.....like I'm going to look at that all the time .

Hey @ph4n70m-404, how can I flash magisk without the boot.img? I attempted to flash it as a zip, but the screen went black for half a second and twrp restarts.....

ShadowWeasel said:
Loving it so far, with the exception of only seeing half of my battery icon. Oh well no worries.....like I'm going to look at that all the time .
Click to expand...
Click to collapse
Thats a spark only issue just because of the status bar padding settings and it doesnt properly set itself at default, just go to fireworks - status bar - extra sb settings - and set the status bar padding to another value then set it back to default.
ShadowWeasel said:
Hey @ph4n70m-404, how can I flash magisk without the boot.img? I attempted to flash it as a zip, but the screen went black for half a second and twrp restarts.....
Click to expand...
Click to collapse
Ive had no trouble flashing Magisk v23 on vaches twrp version 3.5.0, maybe the zip is corrupted? I can't think of any reason you would be getting that issue other then maybe your install of twrp or the zip is messed up.

[ROM][OFFICIAL][12][HOTDOG] KOSP Official 2.2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* DISCLAIMER: Read this carefully
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
KOSP is a small project based off AOSP and we intend to improve upon AOSP to provide a stable and better alternative to OEM roms with additional features.
Features
There are some cool features, see for yourself
Truth is I'm just lazy to write a long list of features and we intend to focus on the stability rather than adding a ton of features.
Gapps is included!
Note:
hotdog has dropped sdcardfs
We are enforcing and safety net passes out of the box
What's broken?
You tell me
Bug reporting:
DO NOT report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Do not approach us without any logs for reporting bugs
If it is a random reboot, grab everything from /sys/fs/pstore. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Downloads: GDrive, Sourceforge
Magisk: https://github.com/topjohnwu/Magisk/releases
INSTRUCTIONS
First time installation:
Download the fastboot zip, It ends with -img.zip.
Boot to bootloader
fastboot update --skip-reboot --skip-secondary zipname
Now reboot to recovery
Factory reset in the recovery
Reboot system
Upgrading:
It is recommended to update using updater
Via recovery:
Reboot to recovery
Sideload with ADB (preferred)
Reboot to recovery
Reboot
Via updater app:
Open Settings -> System -> KOSP Updater
Download the ota if available or if you have already downloaded the zip then use it for local upgrade
Install the update
Flash magisk to inactive slot (optional)
(optional) Reboot to recovery if you have anything else to flash
Reboot
Follow us on Telegram
Credit/Thanks:
Google for AOSP
LineageOS
YAAP
DerpFest
MSM-Xtended
And all others we may have forgotten to credit
Special thanks to @npv12 and also to @AnnoyingZlatan for his amazing kernel.
Thanks to @Mohammed_Gabr for making our awesome banner.
Last but not the least, thanks to all our testers, who have helped us to squash many bugs as possible
XDA:DevDB Information
KOSP, ROM for the OnePlus 7T Pro
Contributors: @Joker123##, @npv12
Device maintainer: @npv12
ROM source: https://github.com/AOSP-Krypton
ROM Kernel: Dora kernel
Kernel source: https://github.com/AOSP-Krypton/kernel_oneplus_sm8150
ROM Firmware Required: OOS 11.0.4.1
Android Version: 12
Based On: AOSP
Version Information
Version: 2.2
Status: Beta
Created 2021-11-07
Last Updated 2021-12-18

Reserved

Wow! Thanks!

Thank you.
Running it right now to have a look

Can anyone boot this file and face any problem, please tell me ?

@npv12 So what's broken: From setting => network & internet => SIMs I cannot access the 2nd sim card settings.
The only way I managed to = I use my second sim card for data so setting => network & internet => internet => the ¨gear¨
Need to find a replacement for this camera app also ><

Repear88 said:
@npv12 So what's broken: From setting => network & internet => SIMs I cannot access the 2nd sim card settings.
The only way I managed to = I use my second sim card for data so setting => network & internet => internet => the ¨gear¨
Need to find a replacement for this camera app also ><
Click to expand...
Click to collapse
can you give me a screen short for looking demo ?

Repear88 said:
@npv12 So what's broken: From setting => network & internet => SIMs I cannot access the 2nd sim card settings.
The only way I managed to = I use my second sim card for data so setting => network & internet => internet => the ¨gear¨
Need to find a replacement for this camera app also ><
Click to expand...
Click to collapse
Try this
adb shell
settings put global settings_provider_model false
And check if it shows now.

Can anyone share the screenshots of the rom.

Gotta try this

susmita1995 said:
can you give me a screen short for looking demo ?
Click to expand...
Click to collapse
What do you mean? Screenshot of how the ROM is looking?

Y
Repear88 said:
What do you mean? Screenshot of how the ROM is looking?
Click to expand...
Click to collapse
Yes

Sagarsinghdude said:
Y
Yes
Click to expand...
Click to collapse
Here are few

Repear88 said:
Here are few
Click to expand...
Click to collapse
Is material you theming function working?

Geekbench score highest I've ever got out of it

npv12 said:
Try this
adb shell
settings put global settings_provider_model false
And check if it shows now.
Click to expand...
Click to collapse
Great, thank you, it works.
I have to check now why I can't send files with telegram ...

is it compatible with oneplus 7t pro mclaren?

Sagarsinghdude said:
Is material you theming function working?
Click to expand...
Click to collapse
I don't know what this means.
I'm back on XDA after 2 years running the stock ROM on my OP 7Tpro so I'm a bit lost ^^

There is no sim network icon in my statusbar.. Did i miss something in setting?

Repear88 said:
I don't know what this means.
I'm back on XDA after 2 years running the stock ROM on my OP 7Tpro so I'm a bit lost ^^
Click to expand...
Click to collapse
Yes it is working
and can anyone share me telegram link? i cannot find it
And what is the link for telegram channel? I cannot find you, I've been searching since yesterday
thank you

[ROM][13][UNOFFICIAL][GAPPS][JUDYPN] Evolution X | 7.9.3 Bulalo [06/25/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 7.9.3 Bulalo for the LG V40 ThinQ [judypn]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
​
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM​
What are our features?
- Just flash and check "The Evolver" -
Some features may not be available in this build version
SELinux permissive
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
HERE you have an example how to install it
Previous build versions
Changelog disponible on Telegram
Android OS version: 13.0.0_r52
Security patch level: JUNE 2023
Build Author: gregoorr
Source Code: Evolution-X GitHub
Kernel Source Code: https://github.com/EmanuelCN/android_kernel_lge_sdm845
ROM Developer: Joey Huab (Stallix)
Status: Stable
Release date: 2023-06-25
​​

Does the IMS stack work, meaning are VoLTE and VoWiFi functional for those carriers that support it?
Quad DAC functional?
[NG]Owner

Quad DAC works but VoLTE and VoWiFi don't.

why do i get bootloop when I install evolution X on my lgv40 and when I tried to flash the evolution X earlier version it will also get bootloop when I reboot. How to fix?

Hello
Clean flash or dirty flash?
Did you do format data and wipe dalvik cache after flashing the ROM?

greg_oor said:
Quad DAC works but VoLTE and VoWiFi don't.
Click to expand...
Click to collapse
Is there a toggle for it or is it just always on? Is DTS:X included?

blowtorchhonor said:
Is there a toggle for it or is it just always on? Is DTS:X included?
Click to expand...
Click to collapse
DTS:X is not included, Quad DAC is off, you have to turn it on, there is a toggle for it.

After flash Evo Rom (followed your guide), my phone bricked (it's show an android robot and text "no command". i was using Stock Rom (30c, TWRP, N0kernel).
Did i miss something? Ofox? Please help, i really want to use this ROM.
Now, i am trying to kdz my phone.
------------------------------------------------------------------------------------------------------------------------------
I did it. I got Evo X now. My god!

bestgames said:
After flash Evo Rom (followed your guide), my phone bricked (it's show an android robot and text "no command". i was using Stock Rom (30c, TWRP, N0kernel).
Did i miss something? Ofox? Please help, i really want to use this ROM.
Now, i am trying to kdz my phone.
Click to expand...
Click to collapse
"No command" that's aosp recovery xD Is recommended to use Stock ROM 30d. What you need to do? Factory data reset and in recovery (power + volume down 3s next volume up) reboot system now.

Thanks for replying! I already got Evo X working now. But after flashing magisk, i got bootloop.

I flashed magisk by adb sideload using TWRP without any problems and I updated it to latest version. Do you used magisk canary to flash?

greg_oor said:
I flashed magisk by adb sideload using TWRP without any problems and I updated it to latest version. Do you used magisk canary to flash?
Click to expand...
Click to collapse
I use magisk 20.4 stable (i flashed it for stock rom everytime kdz again). But TWRP is stay on Slot-a and system is on slot_b. After flashed the rom, rebooted to system, i can not boot in to recovery (no command).
If i use Qfil to replace boot_b with twrp and then flash magisk, phone's soft-brick.

You should use magisk canary(to slot _b, where the system is, I uploaded it) and stock ROM 30d with those two things everything is working fine. I tried TWRP only by fastboot, booting it, so no idea.

My God! I found out the way to fix all my problems:
1. Download Evo X ROM.
2. Reboot to TWRP recovery.
3. Format data (yes) and then Wipe Data, cache, system.
4. Flash ofox recovery (it will writes ofox to slot_b, the same location with system).
5. In ofox, change "Data partition" to F2FS.
6. Flash Magisk Canary (download from your link).
7. Reboot to system.
8. Say YEAH!
I spent 3 hours to find out what the f* 's happenning (01:00 AM in my country now).

Great!

bestgames said:
My God! I found out the way to fix all my problems:
1. Download Evo X ROM.
2. Reboot to TWRP recovery.
3. Format data (yes) and then Wipe Data, cache, system.
4. Flash ofox recovery (it will writes ofox to slot_b, the same location with system).
5. In ofox, change "Data partition" to F2FS.
6. Flash Magisk Canary (download from your link).
7. Reboot to system.
8. Say YEAH!
I spent 3 hours to find out what the f* 's happenning (01:00 AM in my country now).
Click to expand...
Click to collapse
Where did you find orangeFox for this device?

Did anyone successfully flashed this gsi on LGV40 - 405UA? if yes any tips or instructions. My multiple attempts all eneded in boot loop failure ......
​

sim data is not working on this rom, any solution
tried on korean N model.

Want to share this, this is best custom Rom i had try on V405EWB

haseebali55554 said:
sim data is not working on this rom, any solution
tried on korean N model.
Click to expand...
Click to collapse
Hi,
Have you manually set yours apn parameters ?