DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY DAMAGES TO YOUR DEVICE. PLEASE GO AHEAD WITH CAUTION.
NOTE: This will void your warranty! & Will reset your device!
Hi!
I'm sharing a way to unlock the bootloader of the Realme 7 5G.
Prerequisites:
ADB + Fastboot
Realme 6 In-depth APK (Trust me, It works!)
TWRP if you want to root aswell as a Magisk.zip (rename magisk.apk to magisk.zip)
MTK Drivers
USB Cable, stock is fine.
Ok, once you've gathered all those things, first make sure you have enabled bootloader unlocking and debugging. Then open the in-depth test and start the test.
Now follow the steps:
1. Plug RMX2111 (Realme 7 5g) into PC
2. Run
Rich (BB code):
adb devices
in your terminal to make sure your device is recognized.
3. Run
Rich (BB code):
adb reboot bootloader
to get in the bootloader
4. Optional: run
Rich (BB code):
fastboot devices
to verify your device is fastboot mode.
5. Run
Rich (BB code):
fastboot flashing unlock
to unlock the bootloader (press the volume button to unlock)
Congratulations! You've unlocked the bootloader. Now to root:
1. Grab the required recovery.
2. Boot back into bootloader in step 2.
3. Run
Code:
fastboot --disable-verification flash vbmeta PATH-TO-VBMETA.img
4. Run
Code:
fastboot erase recovery
5. Run
Code:
fastboot flash recovery PATH-TO-RECOVERY.img
6. Once you are in recovery, press 'install' and select the magisk.zip where ever you stored it.
7. Swipe to flash and then reboot.
Now you are rooted!
Hope this works guys! Enjoy!
(someone plz make custom rom for this device)
was this on android 11 & UI version 2?
thnks
z3213v said:
was this on android 11 & UI version 2?
thnks
Click to expand...
Click to collapse
yep
thank you!
ok i have tried this - no luck for me with RealMe 6 In-Depth APK unfortunately
app crashing on wifi connection
z3213v said:
ok i have tried this - no luck for me with RealMe 6 In-Depth APK unfortunately
app crashing on wifi connection
Click to expand...
Click to collapse
sorry to hear that, make sure you have developer tools and select oem unlocking. also try different indepth, and also try turning off wifi.
z3213v said:
was this on android 11 & UI version 2?
thnks
Click to expand...
Click to collapse
Where can I download the necessary in-depth test? Do I need to upgrade to version 11? I have version 10 and it doesn't work for me (https://c.realme.com/in/post-details/1273238614934814720). Thanks!
kromls said:
Where can I download the necessary in-depth test? Do I need to upgrade to version 11? I have version 10 and it doesn't work for me (https://c.realme.com/in/post-details/1273238614934814720). Thanks!
Click to expand...
Click to collapse
i dont really know where i got it from, another method is using mtkclient and unlocking it. Go to the github page of mtkclient to find out.
Hi.. How to fix it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
E9 A53ML
https://www.androidfilehost.com/?fid=24421527759886207
E9+ A55ML
https://www.androidfilehost.com/?fid=24421527759886208
Install
View attachment ADB-Windows.rar
Code:
adb reboot download
fastboot flash recovery <filename>
For e9s nothing? A50aml.
Venozer said:
For e9s nothing? A50aml.
Click to expand...
Click to collapse
Try this, but I'm not sure it works fine or not, so test it by yourself.
https://www.androidfilehost.com/?fid=24421527759886645
cannot flash tecovery for me please help E9+ A55ML
nua69 said:
cannot flash tecovery for me please help E9+ A55ML
Click to expand...
Click to collapse
please show me the flash log.
Installation of this version was as usual, smooth as silk.
Love the newly added features.
E9+ A55ML
sabpprook said:
please show me the flash log.
Click to expand...
Click to collapse
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
drag the file into terminal window instead of typing filename.
nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
1. Download the file twrp-3.0.0-1-a55ml_dtul.img from the link on Post 1.
2. Copy this file to the ADB/Fastboot folder.
3. Power Off your phone.
4. Press Power + Volume Down for 7-10 Seconds.
5. You may reach Download Mode directly , or if you reach Bootloader, use volume button to highlight Download Mode and push Power button.
6. Check at the top to make sure that bootloader is unlocked. (You cannot flash if the status says Locked or Relocked)
7. Connect your phone to computer using USB-MicroUSB cable
8. Run Command Line Window from ADB/Fastboot folder.
9. Type : fastboot flash recovery twrp-3.0.0-1-a55ml_dtul.img
That's all.
hi
when i try to backup my ROM, it brings System and System Image in the menu options.
Is it necessary to select System Image in the menu options or only System is enough ?
thx
Sent from my HTC One E9PLUS dual sim using Tapatalk
Works well on E9
Thanks again for the upload. Flashing went well, without any problems, on E9 (not plus) TW version 1.50.709.3.
:good:
What features does this have over 2.8?
Thanks
The links are not working
The link for HTC one e9s is not working.
hi,
my xiaomi mi 5s phone
No sensor works Gps/compass/light/proximity and ...
Before I have this problems, I used twrp recovery and custom ROM , then I wipe every thing and format storage in twrp and install a miui custom rom .
then i saw this problems, but when i flash pixel custom rom everything is work,
# now , I did flash last official global ROM successfully ( in EDL mode and miflash) but yet I have this problems!
and noW i don't have twrp recovery and my bootloder is locked.
when i want sign in to mi account for unlock bootloader ... i see this error: "couldn't check device secuirty info"
i can sign in to mi account into browser , but i cant sign in to account in setting
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when bootup my phone , I see this message: FIND DEVICE STORAGE IS CORRUPTED
no sensor work!
PLEASE HELP ME.
THANKS
Looking at the changelog, I won't flash this rom to my phone. If I were you, I'd download a MIUI 10 version from Xiaomi eu, a fastboot version. And will flash it using MiFlash, formatting storage (drop down menu, bottom right). Don't try MIUI 11 if you plan to go back to MIUI 10. I didn't play much with that, but tried a few times - downgrade fails with boot loop.
It's finaly fixed!
1. Phone into EDL mode with testpoint
2. Flash last official miui 9 global with miflash
3. Update to miui 10.1 with ota
4. Sing in to mi account and once time find device in brower
5. Unlock bootloader with mi unlock tools.
6. Install twrp with fastboot
7. After First time install twrp, dont turn off device / in Cmd type: fastboot boot twrp.img ( else stok recovery will be restored ! )
8. In twrp a clean install miui 11.0.2 eu
9. And finally everything is ok!
Thanks to me for a few time test and try and xda forum!
??
I have same issue with my Mi5S and I'm going to get a kit to open the phone. In the same time since phone will be opened I'll change the battery with a new one
1. You need to have a TWRP
2. Using the same rom/fastboot rom, search for the persist.img
3. Copy persist.img to root of the device
4. Boot into recovery (TWRP)
5. On Advanced Terminal type this
simg2img /sdcard/persist.img /sdcard/persist_EXT4.img
then type this
dd if=/sdcard/persist_EXT4.img of=/dev/block/bootdevice/by-name/persist
Reboot
Hello everyone, VIPLightning here.
Today I introduce you the December firmware dump with patched boot img included for Android Q.
USE AT YOUR RISK
I am not responsible for what happens to your device! Make sure it is charged enough before flashing!
Procedure
1. Download the zip here
2. Extract the contents
3. Boot your phone into fastboot mode
4. Run the batch script and follow the prompt
5. Reboot and enjoy
Optional: If you wish to have root, copy/paste the command below.
Code:
fastboot flash boot magisk_patched_Y16fS.img
Credits
Asus - Providing source code and full OTA on their website for the Zenfone 6z
Mickey387 - Created the flash scripts. Thanks for giving me permission to pick it from the .68 firmware to use it in this zip.
vm03 - Used his fork of the payload_dumper from GitHub.
Note:
*If you are starting over fresh after flashing the images, you may encounter an issue such as not getting past the boot animation. If that is the case, reboot to recovery, factory reset, and then try rebooting again. After that should be smooth sailing!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Many thanks for sharing!
is there a way I can use this to upgrade firmware whilst retaining an existing custom ROM installation like LineageOS?
E: never mind, was able to use the `Update-partitions-fastboot.bat` do do the above just fine.
Thanks again!
vikashhero said:
Many thanks for sharing!
is there a way I can use this to upgrade firmware whilst retaining an existing custom ROM installation like LineageOS?
Click to expand...
Click to collapse
skip
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
1poweruser1 said:
boot twrp, format data, boot to bootloader
you can follow the post in this thread or my post
[Updated][GUIDE]: How to unbrick your Zenfone 6 Android P/Q (ZS630KL)
Hello. This guide will help you unbrick your device in case your devices hangs as it boots, and always boots into fastboot mode and recovery is unavailable and the like. Note: Unlocked bootloader is not required to do any of the actions...
forum.xda-developers.com
to dump firmware (there's a newer version UL-ASUS_I01WD-ASUS-18.0610.2101.132-1.1.1-user) and then use the fastboot script
boot twrp, format data, flash lineage
I recommed full restore, both edl and fastboot script
[Updated][GUIDE]: How to unbrick your Zenfone 6 Android P/Q (ZS630KL)
Hello. This guide will help you unbrick your device in case your devices hangs as it boots, and always boots into fastboot mode and recovery is unavailable and the like. Note: Unlocked bootloader is not required to do any of the actions...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi there, thanks for your reply.
My intention was to update the necessary partitions whilst retaining my existing LineageOS 17.1 installation. Looking at the contents of the firmware package, there seems to be a batch file (Update-partitions-fastboot.bat) allowing me to do just that.
Kind regards
CODES;
I am NOT responsible for bricked devices, destroyed SD cards or any
damage that may happen to your device.
Requirements;
Unlocked bootloader
WARNING;
Don't use nippon gsi they aren't working,I recommend using phh gsi by phusson lineage os by Andyyan and PE 12 by ponces
INSTRUCTIONS;
Power + volume down button
fastboot reboot fastboot
fastboot delete-logical-partition product
fastboot flash system (name gsi.img)
fastboot reboot recovery
in recovery select wipe data
Reboot to system
bugs:
No bugs
Gsi_projects - Browse /v414/SparkOS-12.4 at SourceForge.net
sourceforge.net
1)If brightness slider is broken:
2)Go to phh treble settings,misc settings enable "use alternative brightness scale", "use linear screen brightness slider" and "allow setting brightness to the lowest possible",reboot the device
I3)d bluetooth audio is broken:
4)Go to phh treble settings,misc settings, "Force enable a2dp off-load" and "Bluetooth workarounds" select mediatek option and reboot the device
I am sorry, my problem is about unlock bootloader. i could not unlock bootloader.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i tried some solutions on internet but it is still same. could someone help me about it?
Thank you....
note: also, i am looking for privacy focused custom rom for xiaomi redmi note 11 pro 4g. if you find usefull one, can you share it here
colasaga said:
I am sorry, my problem is about unlock bootloader. i could not unlock bootloader.
View attachment 5742557
i tried some solutions on internet but it is still same. could someone help me about it?
Thank you....
note: also, i am looking for privacy focused custom rom for xiaomi redmi note 11 pro 4g. if you find usefull one, can you share it here
Click to expand...
Click to collapse
you cannot unlock bootloader using this method
Use xiaomi flashunlock tool
colasaga said:
I am sorry, my problem is about unlock bootloader. i could not unlock bootloader.
View attachment 5742557
i tried some solutions on internet but it is still same. could someone help me about it?
Thank you....
note: also, i am looking for privacy focused custom rom for xiaomi redmi note 11 pro 4g. if you find usefull one, can you share it here
Click to expand...
Click to collapse
Arrow os custom rom but it's in beta right
For unlocked bootloader use mtk client for instant bootloader unlock. Mi unlock take 7 days
Hi Peeps,
Further to my issue within thread >> https://forum.xda-developers.com/t/bricked-oneplus9-pro-unlocked-options-for-newbie.4577539
Listed below is how I/we overcame the fastboot constant boot issue. A little background in case someone comes against the same issues.
I bought a OnePlus 9 Pro in the hope to have a degoogled phone. Following the lineageOS instructions I somehow corrupted my device and when issuing Volume Down & Power got stuck in a fastboot loop.
Failed Resolutions:
1/ MSM
Part of the resolutions mentioned usiing the MSM tool (windows only) However in my case, My windows vm only recognised my phone has a Android Phone nothing else. I should also point out it couldn't go into edl(Both volumes+power) either. Probably why not recognised as OnePlus 9 Pro by windows.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2/ Fastboot & Extract payload.bin .img files) & Fastboot Enhanced tool
a/ https://droidwin.com/unbrick-oneplus-9-pro-fastboot-commands/
b/ https://forum.xda-developers.com/t/...enhance-payload-dumper-image-flasher.4310553/
Both methods needed to reboot in fastbootd mode unfortunately my phone failed with both methods. Got a message regarding failing to boot into userspace
These methods possible would work if windows could recognise the phone/edl is functional.
(Thanks to @TheGhost1951)
Successful Resolution Below - Big thanks goes to @immortalwon
TWRP Method:
[RECOVERY][3.7.0-12.1][UNOFFICIAL][UNIFIED] TWRP with A12/A13 encryption support
This is an unofficial build of TWRP, based on the Android 12.1 branch, that supports encryption used by Android 12 and 13 ROMs. This build is tested on OP9 pro, but it was confirmed to work on regular OP9 too. As always I'm not responsible for...
forum.xda-developers.com
Download link: https://drive.google.com/drive/folders/1MXANZupY0c08n3AZsmqmLJ-isbRYev6m Download from the latest folder.
Official Firmware OnePlus 9 Pro Link: https://oxygenos.oneplus.net/OnePlus9ProOxygen_22.E.13_OTA_0130_all_2111112110_8b4d5c8737d04612.zip
Prerequisites:1/ platform tools installed & path set. (works both on windows/linux) I finished mine on linux due to vm usb issues.
2/ fastboot devices recognises your device,
Initially not entirely sure if this next step was still required or maybe the 2nd option(renaming & moving .img into platform-tools folder) will suffice? maybe someone can advise? I just know it worked for me
1/ Extract zip from above download link to folder.
2/ Issue fastboot boot boot-oos13-firmware.img
After completion my phone had the below options
After clicking reboot & sliding to confirm as advised went into fastboot mode,
Final Successful Method:
1/ Rename file boot-oos13-firmware.img to twrp.img
2/ Place twrp.img inside your platform tools folder.
3/ Now from the command prompt, type this exactly: fastboot boot twrp.img
After completion we had a lot more options within TWRP as below:
1 Now click on advanced, adb sideload and swipe right. If you see options Wipe Dalvik Cache & Wipe Cache DO NOT SELECT!
2/ Move official OnePlus 9 Pro firmware into platform-tools folder & rename to a shorter name, I renamed to twpr.zip
3/ Issue adb sideload twrp.zip (During this stage I moved to my local linux machine as vm wasn't playing nicely with usb.
May see some errors on successful completion.
Upon Reboot Happy Days!
Sorry not really a writer as you can probably tell Thanks for all the guys who assisted me. Happy to report I now have a fully functional LineageOS de-ggogled phone I hope this helps someone in the future. Thanks Daz
Glad you got a functioning phone!