Related
Hi friends,
I have a terrible problem with my fine TouchPro2.
It constantly loses the wifi-connection. My old TouchPro1 never had these issues.
I have the actual HTC stockROM installed. Tried WiFiMonster - but again. After a few seconds it loses the connection.
Sometimes I'm able to download three, four mails, but then it breaks again :-(
Any idea?
re
To be more specific: WiFi goes off after 30 sec. or so. :-(
does wifi turn off? or simply disconnect? if it's disconnecting, first thing i'd do is reboot my router with wifi enabled on the phone and see if the connection improves. if wifi is physically turning off i'd guess it's an issue in the rom. maybe try another rom? and make sure wifi is set to "best performance" on phone.
Is this everywhere or on a specific router?
Does your connection drop after a certain activity (e.g. screen going into standby, opening a specific program, etc.)? Also, have you tried to backup your device and perform a hard reset?
Similar Problems
I've been having similar problems for about two weeks now.
I have tried several things like hard reset, soft reset, changing the rom, playing with the wireless connection and just about everything in the connection folder but no.
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection. However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
If anyone have any suggestion(s), I would greatly appreciated it.
solved...
Thx guys,
I performed a Hardreset and testet one by one the installed software... and found it: I installed a CommManager and it caused the WiFi-Problem :-(
thx
biddle said:
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection.
Click to expand...
Click to collapse
What do you mean "slows down the phone"?
biddle said:
However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
Click to expand...
Click to collapse
If your wifi connects but you cant get out, check to make sure you don't have the proxy box checked in connection settings. I have seen this box mysteriously become checked in the past.
Just a little comment
I will be getting TP2 very soon, but speaking of WiFi problems in general..
I had 3 phone: TyTN II, Samsung Omnia & iPhone 3g. only the TyTN could connect to WiFi at home while the other two can connect but will not get any data... however, they worked flawlessly in numerous other locations...
the problem was with my linksys router
apparently some older routers not compatible with the newer devices...
just wanted to share
Ok. As of today, it seems to be working, thanks for the help. However, I think it might have been my router. I think it had something to do with overheating because I put my modem on top of it. But the funny part was, everything, with the exception of my phone, was connecting. However, the connection was never really strong or reliable.
Anywho, thanks for the suggestion, even though it didnt really help me, I appreciate the gesture.
So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?
OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY
You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.
The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???
Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.
Well is there an apparently for the WM phone side of things that will do non ad-hoc??
No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.
Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.
Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.
Hi All,
I am trying to share my laptops internet connection with my Defy via a virtual miniport adapter(using a program called connectify)...my phone gets connected perfectly and I am able to surf the net on my phone..but only for a short time. After a while if I just let the phone be on standby for a while, it loses the internet connectivity. It remains connected to the hotspot(on my pc) but somehow there is no internet on the phone anymore. However if I turn off the wifi on my Defy and put it back again, the internet is back. I have tried almost everything but nothing seems to work. Initially i thought the problem might be with the connectify software on my system so tried using other softwares such as virtual router intel mywifi technology etc. I even tried to create a virtual wifi miniport manually from the command line but same problem everytime. I tried to change the wifi sleeo policy in my phone to never and that did not help too. I am running stock Froyo on my Defy. Sometimes when I turn off wifi and turn it back on it wont even connect to the access point, keeps showing scanning...connecting...scanning...connecting...then finally disconnected. I just cant understand what is wrong. If someone can throw some light on this...it would be really helpful, its almost 20 days since I am breaking my head over this.
Thanks
this might help
Install connectify and select wifi security mode as Ad-Hoc,WEP,this worked for me the defy sometimes seems to have a problem with WPA2.
This has been plaguing me for a while and it's making me hate this phone. I've also seen this issue pop around the internet so it's not just me.
What happens is the wifi stays connected to the router but has no connectivity (i've tried pinging the gateway when it happens, the connection is dead although it is listed in the router as connected). And it happens totally random, sometimes it works entire day, sometimes it happens every hour or worse. This seems to have gotten worse with MM. I used to be able to fix it with turning wifi off/on but now even reboot wont help (it connects to the router but immediately says no internet on wifi), i have to reset wifi on the router for it to start working. I have 2 other androids (kitkat, lolipop), an iphone 5, tablet with a hybrid OS, 2 laptops and a desktop on the wifi working without issues so that kinda rules out the router as the sole culprit (it's a Technicolor crap from my ISP that i can't change, i can only buy an additional AP but i have no idea it will help). Ofc, when the connectivity is lost, the phone is still connected to the wifi, hence doesn't switch to network and i stop receiving notifications, which is driving me insane (also a work phone).
I recently installed an app ("wifi connection manager", the app itself is fairly useless, half the stuff doesn't really work that well, and all the options are really things you can do manually) that has a background service that i thought would keep the connection alive. It worked for about a week and then all of a sudden it stopped. I've tries everything else, short of reflashing the phone.
So after ****ing around for the 1000th time, trying to figure it out i realized that turning the WMM off (router QoS) stops the connectivity issues. Problem with this solution is that my download rate over the wifi drops by half immediately (from 50mbit to 25) and after a while all the wifi connections start to deteriorate to the point where it becomes painfully slow. What's more puzzling however is that when i do turn it off, the G4 connects via 802.11g (and for some reason this makes the connection not lose connectivity). Other devices connect via 802.11n whether WMM is off or on (except the desktop, which has an old wifi card, also on 11g).
Sorry for the wall of text. This and the anticipation of a bootloop is making me seriously regret my purchase.
So my two questions are:
1. Is there a way for me to force the G4 to connect via 802.11g even when WMM is On ? It obviously chooses how to connect on it's own.
2. Given the history of events, is there a network guy somewhere here that could identify wth is going on ?
Thanks a lot for those that made it this far
Having some trouble with this, if the laptop eventually connects to the hotspot, or can see it, it says no internet and then disconnects repeatedly.
Tried on two different laptops and my Nokia, all the same. Laptops connect to my hotspot fine, so it's not a laptop issue anyway.
Anyone else have this issue?