Related
So I was on rooted 3.2.6 with xposed installed and decided to upgrade to 3.2.8.
I dirty flashed the full ROM 3.2.8 onto my 3.2.6 (without flashing SU or xposed because I wanted to use Snapchat with snapprefs again so I i flashed 3.2.8 without root , logged into Snapchat etc. )
after that I flashed superuser and xposed and since then my phone doesnt boot.
I interrupted the first try because it took over 20 minutes then tried it again after clearing cache and dalvik but it still doesnt boot ( i see the two circles and red dot)
Hope someone can help me
PS: I didnt make a backup because it would be too large, on the other hand I have the full 3.2.8 on my internal storage as well as the latest superSU
solved it
If someone experiences the same problem you need the newest xposed version v87. Flash it normally and wipe cache/dalvik , thats it !
I had that, I fixed it by boot to twrp flash the xposed uninstaller zip to remove xposed, then the phone should boot normally, I then found a newer version of xposed (the November security patch in 3.2.8 doesn't like older versions) and flashed it via twrp again, all my modules were still there and didn't need setting up again either.
Hope that helps
J_The_Nerd said:
I had that, I fixed it by boot to twrp flash the xposed uninstaller zip to remove xposed, then the phone should boot normally, I then found a newer version of xposed (the November security patch in 3.2.8 doesn't like older versions) and flashed it via twrp again, all my modules were still there and didn't need setting up again either.
Hope that helps
Click to expand...
Click to collapse
thats exactly what I did and it works perfectly now. Thanks.
As the title says I am unable to boot after flashing Magisk (tried v16 and v15.3). It boots fine without magisk but of course no root and no custom recovery. Any help would be appreciated. Didn't have any problems on the previous stable build.
You need to first flash OOS 5.1 let it boot, then go to fastboot and flash twrp then go to twrp and flash magisk, only way to get root
hello, that's what I did and it worked well
this has happened here since 5.0.4
Try to use lastest blu-spark's TWRP, then flash 5.1 & Magisk without extra boot in the middle.
Things I noticed when upgrading:
A) The latest TWRP for dumpling appears to be broken. I get an error mounting /vendor when I use it. I switched to the previous version (20180309) and the error went away and everything seems to work.
B) You may very well have Xposed installed. If you do, there is an SDK bump between OOS 5.0.x and 5.1.x (26 -> 27). You'll need to disable this module either before you install the update (or assuming you already have) remove the module using something like Magisk Manager for Recovery to remove it (reboot to recovery, install module, run mm from terminal, follow prompts).
-Toucan
ToucanSam said:
Things I noticed when upgrading:
A) The latest TWRP for dumpling appears to be broken. I get an error mounting /vendor when I use it. I switched to the previous version (20180309) and the error went away and everything seems to work.
B) You may very well have Xposed installed. If you do, there is an SDK bump between OOS 5.0.x and 5.1.x (26 -> 27). You'll need to disable this module either before you install the update (or assuming you already have) remove the module using something like Magisk Manager for Recovery to remove it (reboot to recovery, install module, run mm from terminal, follow prompts).
-Toucan
Click to expand...
Click to collapse
It's not broken. The vendor error message is because it was recently updated to work better with Project treble, which uses a hidden partition for the vendor. You can simply ignore the error and it will work fine. Or if you flash a treble ROM, the error will then go away.
I just got the phone. Format it in recovery.
Flash latest blu spark twrp (v.8.73).
Flash the Oos ob06.
Reboot to system. Set the phone, instal apps from Play.
Reboot to Fastboot.
Reflash recovery.
Reboot to recovery.
Flash Magisk 15.3. Reboot to system. OK.
Updated Magisk with Magisk.
Hi, Can anyone help me. in my oneplus 5T after installing new rom it is working smooth but i can't upgrade to new updates. in recovery mode the files seems to be decrypted and cant find any folders where i copied the updation . instead new files are found and can't access and find any of the folders of my own. this happened after i input the security lock. i wiped the entire data and installed new roms still it seems so. somebody please help me to find a solution for this
No matter what I try I am unable to root my P2XL on Android 10......
The process I am taking is to boot up twrp and flash the latest Magisk zip, however it fails right at the end with the error failed to mound system and vendor.....
I have just tried to do it again but with a clean install of the October update but nothing has changed.......
the October update wasn't without issue either as that too failed and I had to factory reset the September image and update OTA.....
anyway, any thoughts or advice on how to achieve it or what might be wrong.......
is there specific TWRP versions I need to boot from etc,,,,
Don't bother with twrp
Just use magisk.
Download the factory pixel image on your PC , unzip the boot.img file and transfer to your phone.
Open magisk manager and install magisk by patching the boot.img file U just transferred.
Copy that new patched boot img back to your PC.
Use ADB to ADB reboot bootloader
Type: fastboot flash boot patched_boot.img
That's it
mediaman123 said:
No matter what I try I am unable to root my P2XL on Android 10......
The process I am taking is to boot up twrp and flash the latest Magisk zip, however it fails right at the end with the error failed to mound system and vendor.....
I have just tried to do it again but with a clean install of the October update but nothing has changed.......
the October update wasn't without issue either as that too failed and I had to factory reset the September image and update OTA.....
anyway, any thoughts or advice on how to achieve it or what might be wrong.......
is there specific TWRP versions I need to boot from etc,,,,
Click to expand...
Click to collapse
Since it has been a few months since I messed with my 2 XL, I followed the upgrade 9x guide in my sig to make sure I didn't forget/skip anything.
I just jumped to 10 last night, root, twrp, and cust kernel.
fastboot latest factory image (I left the -w intact for a clean wipe since going form 9 to 10-but have read it is not necessary)
booted back into bootloader and fastboot boot twrp 3.3.3-0.img
once in twrp I install 3.3.3-0
in twrp installed latest EX kernel for 10
rebooted to system
let it boot up fully for a few minutes
booted into twrp
flashed magisk 19.4
rebooted to trwp (superstition for me)
rebooted to system
checked magisk hide in magisk manager
hit systemless hosts in magisk manager
rebooted
Fresh install of android 10, rooted, with cust kernel.
You mentioned the "failed" notice. I've read several places that TWRP will throw the "failed to mount" warning (or something like that) but that it is a false flag. I got this as well and just continued on.
There may be many diff ways to accomplish this, but THIS method worked for me.
Az Biker said:
[/HIDE]
Since it has been a few months since I messed with my 2 XL, I followed the upgrade 9x guide in my sig to make sure I didn't forget/skip anything.
I just jumped to 10 last night, root, twrp, and cust kernel.
fastboot latest factory image (I left the -w intact for a clean wipe since going form 9 to 10-but have read it is not necessary)
booted back into bootloader and fastboot boot twrp 3.3.3-0.img
once in twrp I install 3.3.3-0
in twrp installed latest EX kernel for 10
rebooted to system
let it boot up fully for a few minutes
booted into twrp
flashed magisk 19.4
rebooted to trwp (superstition for me)
rebooted to system
checked magisk hide in magisk manager
hit systemless hosts in magisk manager
rebooted
Fresh install of android 10, rooted, with cust kernel.
You mentioned the "failed" notice. I've read several places that TWRP will throw the "failed to mount" warning (or something like that) but that it is a false flag. I got this as well and just continued on.
There may be many diff ways to accomplish this, but THIS method worked for me.
Click to expand...
Click to collapse
I used a similar method:
I used Duece's Script to flash and format data with April image ( I wanted to able to decrypt with pattern lock); rebooted to system; then rebooted back into bootloader and used Duece's Script to flash but not format data with October image; booted back into bootloader and fastboot boot twrp 3.3.0-0.img; in twrp, flashed 3.3.0-0 zip, rebooted to system, and did initial phone set up; rebooted to twrp, flashed caesium kernel and magisk 19.3 and rebooted to system. Everything worked fine. I did get failed to mount" warning in twrp but both the kerkel and magisk worked fine.
Az Biker said:
[/HIDE]
Since it has been a few months since I messed with my 2 XL, I followed the upgrade 9x guide in my sig to make sure I didn't forget/skip anything.
I just jumped to 10 last night, root, twrp, and cust kernel.
fastboot latest factory image (I left the -w intact for a clean wipe since going form 9 to 10-but have read it is not necessary)
booted back into bootloader and fastboot boot twrp 3.3.3-0.img
once in twrp I install 3.3.3-0
in twrp installed latest EX kernel for 10
rebooted to system
let it boot up fully for a few minutes
booted into twrp
flashed magisk 19.4
rebooted to trwp (superstition for me)
rebooted to system
checked magisk hide in magisk manager
hit systemless hosts in magisk manager
rebooted
Fresh install of android 10, rooted, with cust kernel.
You mentioned the "failed" notice. I've read several places that TWRP will throw the "failed to mount" warning (or something like that) but that it is a false flag. I got this as well and just continued on.
There may be many diff ways to accomplish this, but THIS method worked for me.
Click to expand...
Click to collapse
Hi, by "checked magisk hide", do you mean that you were able to bypass google's safetynet?
I havn't rooted my P2 XL on A10 since i wasn't sure i will be able to bypass safetynet!
thx
1902 said:
Hi, by "checked magisk hide", do you mean that you were able to bypass google's safetynet?
I havn't rooted my P2 XL on A10 since i wasn't sure i will be able to bypass safetynet!
thx
Click to expand...
Click to collapse
My safety net passes in magisk, but I don't use any apps that I can verify that with.
jlokos said:
I used a similar method:
I used Duece's Script to flash and format data with April image ( I wanted to able to decrypt with pattern lock); rebooted to system; then rebooted back into bootloader and used Duece's Script to flash but not format data with October image; booted back into bootloader and fastboot boot twrp 3.3.3-0.img; in twrp, flashed 3.3.3-0 zip, rebooted to system, and did initial phone set up; rebooted to twrp, flashed caesium kernel and magisk 19.3 and rebooted to system. Everything worked fine. I did get failed to mount" warning in twrp but both the kerkel and magisk worked fine.
Click to expand...
Click to collapse
Hi, for TWRP, are you using 3.3.0.0 or 3.3.3.0
I was only able to find 3.3.0.0
Thanks
docluv01 said:
Hi, for TWRP, are you using 3.3.0.0 or 3.3.3.0
I was only able to find 3.3.0.0
Thanks
Click to expand...
Click to collapse
Sorry; an extra 3; I'm using TWRP 3.3.0.0.
---------- Post added at 07:58 AM ---------- Previous post was at 07:37 AM ----------
1902 said:
Hi, by "checked magisk hide", do you mean that you were able to bypass google's safetynet?
I havn't rooted my P2 XL on A10 since i wasn't sure i will be able to bypass safetynet!
thx
Click to expand...
Click to collapse
I DL magisk hide module and use it for two apps, one for comcast business and the other which regulates my home thermostat.
Wow, thanks guys.....you have all laid out pretty well your processes which I will go through later on....
It's strange, as everything is installed and magisk believes it working it just doesn't pass thee root check..
I'll get back to you with my progress...??
Hello, this morning I found my poco f3 updated to Miui 12.5.3.0 (I was on 12.5.0.0) even though I had automatic updates disabled. After the automatic update I lost my root via magisk and twrp in recovery. No problem, I got twrp installed again, then I proceeded to install magisk v23.0 from TWRP, as I had done after 12.5.0.0. update.
Afterwars phone is stuck in a bootloop. I reflashed stock boot image, recovering the phone, but I ave been unable to install magisk in 12.5.3.0, I tried copying boot.img to the phone, then using magisk manager to patch the boot image, then flash the patched image trough fastboot, with the same result.
Anyone knows how to make magisk work in this new update?
Thank you
suloku said:
Hello, this morning I found my poco f3 updated to Miui 12.5.3.0 (I was on 12.5.0.0) even though I had automatic updates disabled. After the automatic update I lost my root via magisk and twrp in recovery. No problem, I got twrp installed again, then I proceeded to install magisk v23.0 from TWRP, as I had done after 12.5.0.0. update.
Afterwars phone is stuck in a bootloop. I reflashed stock boot image, recovering the phone, but I ave been unable to install magisk in 12.5.3.0, I tried copying boot.img to the phone, then using magisk manager to patch the boot image, then flash the patched image trough fastboot, with the same result.
Anyone knows how to make magisk work in this new update?
Thank you
Click to expand...
Click to collapse
Try flashing the older patched boot.img on the new stock firmware.
On the 12.5.3.0 ill patched boot.img from 12.5.1.0 and all right.
Thanks for your replies. It seems the problem was a module I had installed being incompatible with the update (smali patcher). I tried removing the module from /data/odb/modules/ via twrp after installing magisk (also via twrp) and everything finally booted just fine!
But I hope this time disabling automatic updates works as intended
i have the same issue of auto updated and lost my root access.
Which boot.img I should Magish'd to get the root access again?
Currently installing my twrp
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now
if Flash Current TWRP fails, go to Backup > Refresh Sizes and try Flash Current TWRP again
Click to expand...
Click to collapse
Currently at the Resizing stage
Edit 1: failed, I have the error bootctrl error that prevent me from installing after resizing.
I have flashed the twrp3.5.2 directly to boot resulting in bootloop and needed to install the Boot.img from the 12.5.1 from the previous bulit
Edit: actually I can ignore that error.
Magisk installed but safety checked failed even I have the "universal safety check module installed "
Also the app thoax isn't working
I'd try removing all magisk modules, installing stock 12.5.3, then using magisk apk to create patched boot.img and flash it with fastboot (fastboot flash boot magisk_boot_patched.img)
Also, maybe try flashing bot boot_a and boot_b? I had a problem were my active boot partition changed and phone became even more broken.
suloku said:
Thanks for your replies. It seems the problem was a module I had installed being incompatible with the update (smali patcher). I tried removing the module from /data/odb/modules/ via twrp after installing magisk (also via twrp) and everything finally booted just fine!
But I hope this time disabling automatic updates works as intended
Click to expand...
Click to collapse
Might wanna also uncheck Automatic system updates in the Developer settings to be safe.
suloku said:
But I hope this time disabling automatic updates works as intended
Click to expand...
Click to collapse
There is a setting in the Xiaomi system updater that had by default checked auto-update. That setting need to be disabled/unchecked as well.
Since you have root with Magisk, can also Force stop or debloat the updater app, so the system will not update itself.
suloku said:
Thanks for your replies. It seems the problem was a module I had installed being incompatible with the update (smali patcher). I tried removing the module from /data/odb/modules/ via twrp after installing magisk (also via twrp) and everything finally booted just fine!
But I hope this time disabling automatic updates works as intended
Click to expand...
Click to collapse
I had the same issue on Redmi Note 9 Pro (joyuse). Based on your tip I've removed some modules from `data/adb/modules` and my device is finally booting normally. Thanks!
I have OnePlus7T Indian version. I was on 11.0.9.1 and rooted with Magisk Canary version. There was an Update to Magisk which I accidentally installed with OTA option instead of full. Now my phone is not booting. It goes into original recovery mode or fastboot only. How can I recover from this? I tried to flash the magisk patched image file and it shows as flashed but when I reboot I again reach original recovery / fastboot menu only. Please help!!
Problem solved but don't know how. I was trying many things and when I used Tool All in One to flash TWRP the phone rebooted into the system. Not even sure if TWRP is installed or not but everything is working now and phone is rooted. Not sure how it got resolved. Magisk is updated to latest version.
jesrani said:
Problem solved but don't know how. I was trying many things and when I used Tool All in One to flash TWRP the phone rebooted into the system. Not even sure if TWRP is installed or not but everything is working now and phone is rooted. Not sure how it got resolved. Magisk is updated to latest version.
Click to expand...
Click to collapse
Most likely changed slot accidentally when it crashed and then corrected on multiple interventions
HueyT said:
Most likely changed slot accidentally when it crashed and then corrected on multiple interventions
Click to expand...
Click to collapse
Hi. I am again having same problem. I updated Magisk Manager and Magisk and some other apps and phone was not booting. After many tries it again booted but all the modules in Magisk were off. So I switched them on and rebooted the phone and now it is just not booting. I tried to use Tool All In One to flash a TWRP but now there is no recovery. The phone is either not booting (stuck on Circle dot rotating) or just going into fastboot, does not go into recovery. I was on OOS11. I tried flashing original recovery through the tool but it fails. Any way out of this mess??
jesrani said:
Hi. I am again having same problem. I updated Magisk Manager and Magisk and some other apps and phone was not booting. After many tries it again booted but all the modules in Magisk were off. So I switched them on and rebooted the phone and now it is just not booting. I tried to use Tool All In One to flash a TWRP but now there is no recovery. The phone is either not booting (stuck on Circle dot rotating) or just going into fastboot, does not go into recovery. I was on OOS11. I tried flashing original recovery through the tool but it fails. Any way out of this mess??
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
This will wipe your data. Otherwise, you can try manually fastboot flash each individual files of oos11 rom:
⭐[ROM][STOCK] 11.0.9.1-GLOBAL-OnePlus7TOxygen_14.O.35_GLO_0350_2206171459-FASTBOOT
Created my own FASTBOOT Rom can anybody test this out, to see if it works please? Used to "Restore the Firmware" on your phone or when bricked you cannot downgrade or upgrade with FASTBOOT Roms, you must be on the same (Firmware Update Global...
forum.xda-developers.com
HueyT said:
This will wipe your data. Otherwise, you can try manually fastboot flash each individual files of oos11 rom:
Click to expand...
Click to collapse
Thanks. I managed to boot the phone but having root problems. After spending a number of hours doing various trials and checking Xda threads I managed to get it to boot again but root was lost.
I again read more articles and learnt that I have to flash recovery to both partitions so I used Tool All in one, changed active slots and flashed the magisk patched image from this thread i think on both slots. But i am not sure. I managed to get root but the Magisk manager was not getting installed.
I tried few other things and finally i am now not able to root again. Phone is booting after I flash a recovery but I am not sure if it will boot if restarted or go into loop.
Can anyone explain the proper procedure and sequence to follow for rooting and which files to use.
I am on OOS11.09.1
jesrani said:
Thanks. I managed to boot the phone but having root problems. After spending a number of hours doing various trials and checking Xda threads I managed to get it to boot again but root was lost.
I again read more articles and learnt that I have to flash recovery to both partitions so I used Tool All in one, changed active slots and flashed the magisk patched image from this thread i think on both slots. But i am not sure. I managed to get root but the Magisk manager was not getting installed.
I tried few other things and finally i am now not able to root again. Phone is booting after I flash a recovery but I am not sure if it will boot if restarted or go into loop.
Can anyone explain the proper procedure and sequence to follow for rooting and which files to use.
I am on OOS11.09.1
Click to expand...
Click to collapse
[OP7T][Stock/Magisk v23.0] OxygenOS 11.0.9.1.HD65AA boot.img
OnePlus 7T OxygenOS 11.0.9.1.HD65AA Global boot.img Stock: https://mega.nz/file/CV9B2I5A#kIjb0ST0XvAn1yJTMi56hdz1asi-d_LH0uaOCcfrA2g Magisk v23.0 Patched: https://mega.nz/file/eFcygLwb#U0m48VlQekyhrKAEC3Oc56yfxdbjGmGhiwgndU-Grwc Note: DISABLE...
forum.xda-developers.com
HueyT said:
[OP7T][Stock/Magisk v23.0] OxygenOS 11.0.9.1.HD65AA boot.img
OnePlus 7T OxygenOS 11.0.9.1.HD65AA Global boot.img Stock: https://mega.nz/file/CV9B2I5A#kIjb0ST0XvAn1yJTMi56hdz1asi-d_LH0uaOCcfrA2g Magisk v23.0 Patched: https://mega.nz/file/eFcygLwb#U0m48VlQekyhrKAEC3Oc56yfxdbjGmGhiwgndU-Grwc Note: DISABLE...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi. I already used these boot images but I was still having a problem. I had flashed the stock image to both partitions and then the Magisk patched image also but either I was not rooted or Magisk App not working. Finally got things to work by installing TWRP to partition a I believe. I changed active partition to a and then flashed the twrp recovery. Again changed active to b and booted and had root. I had to install Magisk Canary 25210 version only as other versions did not install. After checking on net it seems this version is faulty. So I installed Magisk Delta, then installed Magisk using Direct Install option, rebooted, checked regular Magisk Manager and showed the same Magisk version. Removed all modules from old Magisk Manager and unstalled the app. Setup Magisk Delta modules, hide, SuList as well as apps like LSPosed, HMA etc and now everything is working again.
I still am not very sure where the recovery is installed, on partition a or b? And if a difference recovery is installed on each partition what happens? I am pretty sure I had not installed TWRP on partition b. I am also assuming that once I set a partition as active and flash a recovery in fastboot that recovery is flashed to that partition, is this correct? Things are working but I don't know if the phone will go to recovery mode from system, I have not tried that. So I am not very clear yet but still got things to work.
jesrani said:
Hi. I already used these boot images but I was still having a problem. I had flashed the stock image to both partitions and then the Magisk patched image also but either I was not rooted or Magisk App not working. Finally got things to work by installing TWRP to partition a I believe. I changed active partition to a and then flashed the twrp recovery. Again changed active to b and booted and had root. I had to install Magisk Canary 25210 version only as other versions did not install. After checking on net it seems this version is faulty. So I installed Magisk Delta, then installed Magisk using Direct Install option, rebooted, checked regular Magisk Manager and showed the same Magisk version. Removed all modules from old Magisk Manager and unstalled the app. Setup Magisk Delta modules, hide, SuList as well as apps like LSPosed, HMA etc and now everything is working again.
I still am not very sure where the recovery is installed, on partition a or b? And if a difference recovery is installed on each partition what happens? I am pretty sure I had not installed TWRP on partition b. I am also assuming that once I set a partition as active and flash a recovery in fastboot that recovery is flashed to that partition, is this correct? Things are working but I don't know if the phone will go to recovery mode from system, I have not tried that. So I am not very clear yet but still got things to work
Click to expand...
Click to collapse
Only data partition is shared. All else have both A and B parts