Any one have Orange fox recovery or pitch black?
For mi11 lte my twrp recovery not working properly he give error 1 or error 7 every installation
Try to run twrp directly from pc, do not try to install twrp
Follow this tut
Just follow commands, dont mind other phone
It's not working ! Even i will try all things like again flash twrp same problem yet
Then i will flash old version twrp or new version but still same problem i am stuck one rom if i will try again flash another rom then i am stuck on recovery
yunusk77 said:
It's not working ! Even i will try all things like again flash twrp same problem yet
Then i will flash old version twrp or new version but still same problem i am stuck one rom if i will try again flash another rom then i am stuck on recovery
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/recovery-unofficial-teamwin-recovery-project-3-6-0.4294537/ use the latest unofficial recovery from here and here you have a good guide to install twrp
yunusk77 said:
Any one have Orange fox recovery or pitch black?
For mi11 lte my twrp recovery not working properly he give error 1 or error 7 every installation
Click to expand...
Click to collapse
Error 1 usually appears when the file you are trying to flash is corrupted, or incomplete, or not a flashable file.
Error 7 usually occurs when there's an incompatibility between your phone, and the file you are flashing. This means you are using the wrong file, or your installed TWRP is has some problems.
Related
Hello,
I tried to update my recovery from Phils 5.x to TWRP. SO recomended way was to use goomanager. I tried and it downloaded image and got stuck at checking MD5. Ao I waited and after a while killed the process and downloaded recovery in zip format (openrecovery-twrp-2.7.1.0-t03gub.zip) and flashed it from my Phils.
After that, my phone booted with black screen with green android logo saying "Downloading... Do not turn off target!!"
What do I do?????
Thanx!!
EDIT:
OK, to reply to myself
Tried flashing TWRP from recovery (zip) from Odin (tar), no go. Tried flashing latest Phils' - no go. But I successfuly flashed older Phils' (v5.x) and it works OK.
After this success I againg tried latest Phils', but it just reports failed. Will try to update it from recovery (zip), see what happens....
any clues welcome
OK, managed to install latest Phils' but the strange thing is that after installing zip, I did "reboot recovery" and it rebooted to download mode...??? After I turned it off and back on it booted correctly to updated recovery....
Still weird I can't seem to install TWRP....
Which file should I choose i.e. if I'm installing it from Phils'? There are several possibilities I have standard intl N7100:
openrecovery-twrp-2.7.1.0-t03g.zip
openrecovery-twrp-2.7.1.0-t03gduoszn.zip
openrecovery-twrp-2.7.1.0-t03gub.zip
? I suppose the 1st one?
dalanik said:
Which file should I choose i.e. if I'm installing it from Phils'? There are several possibilities I have standard intl N7100:
openrecovery-twrp-2.7.1.0-t03g.zip
openrecovery-twrp-2.7.1.0-t03gduoszn.zip
openrecovery-twrp-2.7.1.0-t03gub.zip
? I suppose the 1st one?
Click to expand...
Click to collapse
Ya use the t03g one , and you can flash 2.7.0. or 2.7.0.2 ,I haven't tested the latest TWRP version so not sure if it's working right or not.Good luck
I am using TWRP 2.7.0.0 and works fine
I´ve instaled via TWRP Manager. Just flashed img file
Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready
GrayGhost93 said:
Hello, I had some trouble after a CM Update. It was only possible to boot in FastBoot, now I'm a bit further and can go to Recovery and also install ROMs.
But I'm not able to boot to the system, everytime I reboot I get into recovery, does anyone has a hint for me? What to do in this case?
Right now I have this version of twrp installed: https://forum.xda-developers.com/devdb/project/dl/?id=21835
But with the officiall one from here: https://dl.twrp.me/oneplus3/twrp-3.0.2-1-oneplus3.img.html
I can still only go to fastboot and not to recovery, I just have no idea why...
Thanks for help allready
Click to expand...
Click to collapse
Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.
Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Sorry my English...
Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.
Download https://www.androidfilehost.com/?fid=385035244224394867 to your PC.
Reboot into fastboot. Flash via fastboot (fastboot flash recovery twrp....img). Reboot into recovery. Reboot to system ... should work now, hopefully.
Keep me posted.
Click to expand...
Click to collapse
Did it, but same issue...
Download Official Recovery from OP home page and flash it
fastboot flash recovery OFFICIALRecovery.img
into Official Recovery, Flash OOS.
After booting Reboot Fastboot again.
and flash twrp, on twrp you can flash Roms.
CM14 need newest firmware and modem...
Click to expand...
Click to collapse
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
Had the same problem after I appplied the ota. I was on twrp. What I did was adb sideloaded the OOS 4 then I was able to boot to system.
Click to expand...
Click to collapse
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!
GrayGhost93 said:
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Click to expand...
Click to collapse
Download the official recovery here:
http://oneplusroms.s3.amazonaws.com...694615&Signature=1Momnxm8gHWw03D401Oof5YxnE4=
What is the exact output if you do
Code:
fastboot flash recovery recovery_OBT7.img
OOS4 is the stable release. I would strongly recommend it over cm right now. It's actually quite polished.
You can download the official full zip here:
http://otafsc.h2os.com/patch/amazon...en_16_OTA_035_all_1612310359_e10cadfb2af7.zip
GrayGhost93 said:
Did it, but same issue...
Tried it, but original recovery says installation failed, without giving me a possibility to install something ...
OOS 4 means a beta Version? Does it work with 3.2.8 as well? Thants what I would install ...
Got it a bit further, could start it by simply reboot and now I am in the system, which was installed (LineageOS 14.1) - seems to work now, thanks a lot guys!!!
Click to expand...
Click to collapse
Flash TWRP 3.0.2-22 (download available in other questions. Wait a bit will link it.
Edit: https://forum.xda-developers.com/attachment.php?attachmentid=3971072&d=1481920669 )
See if you can boot into recovery. If you can. Flash whatever rom you have or nandroid backup.
Also are you sure you're using the correct modem and firmware version? Download those recommended in the rom you're using and flash those along with the rom.
http://forum.xda-developers.com/one...dem-collection-flashable-zips-t3468628/page23
Recently I couldn't boot after flashing different firmware, same with different rom without its firmware and modem.
My phone is stuck on twrp recovery bootloop after i ****ed up and tried to install an OTA update help ?
yakujana said:
My phone is stuck on twrp recovery bootloop after i ****ed up and tried to install an OTA update help ?
Click to expand...
Click to collapse
Reboot to bootloader and flash stock recovery
Yep and if it works flash blu-spark twrp it should be fine.
Yeah, I went through a lot of steps, but basically install stock recovery v2 and let it restart. Once it succeeds or fails, it will go back to normal, and you can flash whichever recovery/rom combination you prefer. I don't have the official url, but this one seems legit:
https://www.androidfilehost.com/?fid=385035244224403547
First time flashing ROMs, installed resurrection remix tryed to install Gapps which failed, yet RR booted up on its own just fine. Then tried to flash a new recovery on it (TWRP 3.0) yet the phone would just never boot up to complete the recovery install. So now i have a phone which wont enter recovery mode and cannot complete the download of the new recovery.
TLDR: Phone wont boot into recovery as ROM is broken so download cant be fixed?
Previous: recovery TWRP 2.6
Phone: Samsung Galaxy S4 GT-19195
Any help would be really appreciated!
Thanks
Are you sure that you have flashed the right Recovery for your Phone.
Normally the way is.
Boot into Recovery
Install the Recovery .zip file
Reboot into Recovery.
Reboot into System ( ROM )
Can you post a link where you download the Recovery and which file.
bierma32 said:
Are you sure that you have flashed the right Recovery for your Phone.
Normally the way is.
Boot into Recovery
Install the Recovery .zip file
Reboot into Recovery.
Reboot into System ( ROM )
Can you post a link where you download the Recovery and which file.
Click to expand...
Click to collapse
That would only work from TWRP ver 2.8.4, I think you missed he is still on very old TWRP or maybe he edit later , he would have to install with Odin method
@Spec77
If you can boot into download mode you should be able to flash new recovery with Odin method (NOT use zip file).
As Bierma suggests maybe you flashed wrong TWRP does your phone have another letter and after gt-19195 if so it is a different phone & you need different TWRP. Or maybe you just tapped wrong link.
IronRoo said:
That would only work from TWRP ver 2.8.4, I think you missed he is still on very old TWRP or maybe he edit later , he would have to install with Odin method
@Spec77
If you can boot into download mode you should be able to flash new recovery with Odin method (NOT use zip file).
As Bierma suggests maybe you flashed wrong TWRP does your phone have another letter and after gt-19195 if so it is a different phone & you need different TWRP. Or maybe you just tapped wrong link.
Click to expand...
Click to collapse
This way works also if you come from a CWM or PhilzTouch Version.
If you come from TWRP =>2.8.4.0 than you can flash an *.IMG File ,but you can flash on all Versions a *.zip file.
Managed to fix the brick
Thanks for the help, I managed to fix it by installing TRWP 3.0 from ODIN, and now that i have that I'm fine
Thanks!
after I installed magisk I can not install any rom custom the only rom that works and the backup I made in twrp of the official rom
Does anyone know how to solve it?
I do not really understand what you are saying here, just wipe everything in twrp and flash rom. Magisk cannot survive a wipe.
What do I do to get back ROM with these errors?
I already did this I cleaned everything in twrp no more rom installs of the error 7 and also of the error in the fastboot to return stock rom error in the bootloader and the original recovery does not install also as if it did not have space .... the twrp has approximately 16mb and the recovery stock has 20mb and only recovery with 16mb
cleberkorg said:
I already did this I cleaned everything in twrp no more rom installs of the error 7 and also of the error in the fastboot to return stock rom error in the bootloader and the original recovery does not install also as if it did not have space .... the twrp has approximately 16mb and the recovery stock has 20mb and only recovery with 16mb
Click to expand...
Click to collapse
Twrp for our device is 15/16mb. Are you sure you have the 64 bit twrp? That would give error 7 if using standard release of twrp with the now 64bit ROMs.
continues to give error 7
I already tested several twpr of 64bits more anyway it continues to give error 7
I would fastboot flash the stock rom again. Back up storage first because it will be wiped.
Cupcake 1.5 said:
Twrp for our device is 15/16mb. Are you sure you have the 64 bit twrp? That would give error 7 if using standard release of twrp with the now 64bit ROMs.
Click to expand...
Click to collapse
my moto z2 play is working because I backed up by twrp my problem and the following when I try to install any custom rom it of the error in twrp in both x86 and x64 of the error and how much I try to install the stock rom by the error fastboot in the boot and no recovery all rom stock oreo the recovery is with 20megas and not for this reason ..... besides these problem every time I reboot the device connect direct by recovery ai I have to boot through fastboot and click on start for the android link
cleberkorg said:
my moto z2 play is working because I backed up by twrp my problem and the following when I try to install any custom rom it of the error in twrp in both x86 and x64 of the error and how much I try to install the stock rom by the error fastboot in the boot and no recovery all rom stock oreo the recovery is with 20megas and not for this reason ..... besides these problem every time I reboot the device connect direct by recovery ai I have to boot through fastboot and click on start for the android link
Click to expand...
Click to collapse
I can not make blankflash have any tutorials? I can not install the driver cualcomm how does the procedure?
cleberkorg said:
I can not make blankflash have any tutorials? I can not install the driver cualcomm how does the procedure?
Click to expand...
Click to collapse
I have no information on making blank flash but, there should be something on it in the q&a or guide part of this forum.