Hi i need help. I have a Galaxy Tab S4 SM-T830 bought from the US and i accidentally dropped it... so i had it fixed but the digitizer screen and the logic board that i had replaced all bought from aliexpress and it is chinese. Is there a way or a guide to convert my Tablet from China to Global?
Thank you so much
Related
Hi GUys,
I need serious help from you guys.
I have a S3 (i747 model at&t) this i got it from USA and now i am in india for good.
Yesterday my S3 Digitizer broke (but the housing/faceplate is perfect).
I took it to samsung service center in INDIA chennai. they told that they do not replace just the LCD/Digitizer but they replace the hole set as it is (ie, LCD/digitizer already fitted to a faceplate). and the cost of it all is 7100rs (apprx 135USD).
But the problem began now. You see the motherboard layout for i747 and i9300 models are different (ie faceplate/housing of i747 and i9300 are different) they are not INTERCOMPATIBLE.
And in india they dont have faceplate/housing for i747 model as its only available in USA.
can anyone tell me where can i replace the screen of my i747 S3 in india?
Or is there anywhere from where i can ship out the product to india.
PS: i know people would point out to videos in where to remove the LCD/digitiser out of the faceplate buy using heat guns... well i dont want to do it.
I want the Faceplate/LCD-Digitiser for WHITE i747 model S3 and i am in INDIA (also will i get it in the same cost approx 130 usd).
Your help will be immensely appreciated.
A Question to Samsung: I have a i747 and I carry a International warranty and I am out of USA for next 3 years and I break my Screen? Will they not help me out or repair my S3? What is the use of having International warranty then in first place?
Awaiting your reply,
Senthilprakash Selvaraj
I have a Samsung N5120 GSM Version and i dropped it and the screen and LCD is completely gone. Unfortunately I am not able to locate a replacement LCD plus digitizer for this tablet. Is the N5100 LCD+ Digitizer compatible with the N5120. I apologize if there is already a thread about this I just could not find it anywhere. Any help about this will be appreciated:crying:
*** Still no help! Can someone help Pitri! Pitri need his Samsung N5120 LCD+Digitizer assembly replaced. Please help,
galaxy note 8 n5120 screen replacement
Ive got the same issue, can find digitizer screens quite easily on ebay etc for n5100 and and n5110 but difficult to find specifically n5120 screens. They should all be the same but wanted to confirm before I purchased one. The only thing i can think of is that the 3g or 4g antenna might be built into the screen and I really don't want to wreck my good 4g connection!
Hi guys
I have international version of Samsung Galaxy S2 Gt-I9100 with bad mother board.I have a friend in US who has two S2's with broken displays.But they are US versions from T-Mobile and Sprint.
Can anyone tell me is it possible to swap the LCD of international version in to US versions of Samsung Galaxy S2?
Thank you in advance
I highly doubt it....but try googling it.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
juno106 said:
Hi guys
I have international version of Samsung Galaxy S2 Gt-I9100 with bad mother board.I have a friend in US who has two S2's with broken displays.But they are US versions from T-Mobile and Sprint.
Can anyone tell me is it possible to swap the LCD of international version in to US versions of Samsung Galaxy S2?
Thank you in advance
Click to expand...
Click to collapse
Nope, you can see the comparison of the two. The display on the T-989 is larger than the international SII http://www.phonegg.com/compare/2381-1877-Samsung-Galaxy-S-II-T989-16GB-vs-Samsung-Galaxy-S-II-I9100-16GB
I think you'll get the same result with the Sprint version, no-compatibility
And what about the main board?Are they the same or different?Maybe it is better to find used main board and put it in my phone.
so i have bought a samsung galaxy s3 i747 here in italy. but 2 months later i kinda crack the screen, and now i wanna replace it but here in italy we only have the i9300 model, so my question is, is the i9300 screen fit on i747?
thank you guys
renzojacquez said:
so i have bought a samsung galaxy s3 i747 here in italy. but 2 months later i kinda crack the screen, and now i wanna replace it but here in italy we only have the i9300 model, so my question is, is the i9300 screen fit on i747?
thank you guys
Click to expand...
Click to collapse
The i9300 uses different screen technology and are a slightly off compared to each other..
YPG70 said:
The i9300 uses different screen technology and are a slightly off compared to each other..
Click to expand...
Click to collapse
Agree. OP you'll have to keep searching
I have a Galaxy J from NTT Docomo (Model SC-02F or SGH-N075T). The screen is cracked on it, I don't know if this is the appropriate place to ask about this, but does anyone have an display assembly for the Galaxy J SC-02F or Galaxy J SGH-N075T that they'll be willing to sell to me? The phone is a Japan exclusive (I think Taiwan too) so it's hard to find parts here in the US, but hopefully someone does have one. I've looked all over Google but I couldn't find a proper replacement display assembly (digitizer, lcd) that would ship to the US...