Related
Hi Everyone,
I am a new owner of a soft-bricked SM-T700. I am feeling very down and need some advice. I will be as thorough as I possibly can and I would truly, truly appreciate some help and advice from you kind folks. This is the first time I have had a bricked device out of my many Android devices.
My PLAN:
-Root
-Custom Recovery
-Nandroid Backup
-Backup EFS
-Flash stock western country firmware
What HAPPENED
Today I bought a wifi T700. I bought it in my hometown, which is China. Whenever I buy a new Android device in China my first action is to ensure it doesn't have any hardware/warranty issues. I then go about reflashing a western firmware so I can use Google services.
1) First I rooted using CF-Auto Root. That worked fine. I confirmed that I had root using an app called root checker.
2) I then attempted to flash TWRP recovery by following the instructions here: http://teamw.in/project/twrp2/238
- First I tried flashing the .tar file using Odin. As soon as I hit 'Start' Odin froze and I got the Windows error saying "Odin Downloader Has Stopped Working", asking to close the program. I close the program. I tried this several times then rebooted. It seemed as though the phone booted fine.
- I then tried using their own software, TWRP manager, here: http://jmzsoftware.com/twrp-manager-4. This app just crashed every time I booted it. I submitted an error log.
- I then tried using 'Flashify' as suggested by someone here on XDA. Once I did that it said flashed successfully and would I like to reboot. I said yes. This is when my troubles started.
3) Upon reboot it immediately booted into a sparse looking 'Download Mode' screen, all in English (the normal one on mine has some Chinese too) without the volume button options to reboot or continue. It just went straight into this screen.
After trying to reboot the phone using several power button holds and key combinations, it appears I am stuck in this screen, so I thought I had no chance of doing a NADROID backup as originally planned, so I decided to try my luck and flash the western firmware.
I tried to flash the version of the firmware provided here: http://forum.xda-developers.com/showthread.php?t=2798835
http://www.androidfilehost.com/?fid=23501681358556680
It got all the way through the install until it hit the hidden.img and then failed. I've attached a screen capture.
A few notes;
I have tried using two different USB cables (the one that came with it, and the one that came with my HTC One). I have tried several USB plugs, including the one in the back of my PC. I allowed Odin to do it's MD5 check and it said the file checks out.
I have tried using the Kies emergency Firmware recovery. Pffft! As it that was going to work. Damn Kies.
I sound like I've still got my sense of humor, but actually I am really cut up about this. It is so much money for a tablet and now it is useless unless I can get s firmware that will flash.
I don't have my stock Chinese firmware. That is T700ZCU1ANF4/T700CHN1ANF4/T700ZCU1ANF4/T700ZCU1ANF4 (CHN).
Questions:
Does anyone know where I could find the stock Chinese firmware to try flashing back to that?
Does anyone have the .PIT file and instructions on how to flash that, because I have read in other threads that it solves the hidden.img problem.
Does anyone know why this may have happened and have any alternative suggestions?
Could it have been the TWRP that actually caused this? The thread here indicates others aren't having trouble. Why would it have frozen for me?
I will try anything at this point. I am desperate.
Thanks so much in advance. Please come through XDA! Please come through Galaxy Tab S owners!!!!!!
-------------------------------------------
CLOSURE EDIT: I managed to flash Australian firmware, after reinstalling Kies, uninstalling and reinstalled the device drivers. I also made sure all Kies processes were killed before flashing with Odin.
For people in a similar situation I would urge them to have patience and keep trying to flash stock firmware.
Private Message UpInTheAir and see what he thinks.
Well let me start out by saying i have done some truely horrible things to my tablet in the proceas of porting CM 11. Bad kernels, messing up the partitions, you name it ive probably done it at this point.
I would try using heimdall. Flash one of the recoveries.. and try formatting your partitions.
The program crashing is when you should back off from trying to flash. Reassess what you did and what happened and if it's failing at a point flash the stock back before rebooting.
Continuing blindly was the problem. On something as expensive as a tablet never continue past a point where something goes wrong without reflashing back to stock and starting again.
As eousphoros said Use heimdall and flash a recovery.
Good luck.
eousphoros said:
Well let me start out by saying i have done some truely horrible things to my tablet in the proceas of porting CM 11. Bad kernels, messing up the partitions, you name it ive probably done it at this point.
I would try using heimdall. Flash one of the recoveries.. and try formatting your partitions.
Click to expand...
Click to collapse
Hi All,
Thanks for taking the time to reply.
You are certainly right that it is my fault and I should have stopped at some point and reassessed what was happening.
Can you please give me some more information about the steps you have offered? I am researching heimdall now, but if you could give some steps or advice that would be much appreciated.
It's probably going to be difficult because I assume we are in different timezones. I will persevere and try to get this worked out.
I have downloaded Heimdall and understand that it is an alternative to using Odin.
I currently have three questions about Heimdall.
1. Do I need to do the install drivers step if I have already installed the drivers for my device? Is this some step that actually replaces the current drivers with ones that are required for Heimdall to operate? I ask them because when I list USB devices, my tab is not shown up as Samsung Composite Device. It is actually shown as two separate entries, looking like generic USB entries.
2. Do I need to have a valid PIT file in order to run a custom Heimdall flash?
3. Which partition should I select if/when I run the Heimdall flash?
I'm dying a little inside every time I look at my tablet
Install heimdall
Download a recovery, I am going to pimp mine. http://forum.xda-developers.com/galaxy-tab-s/general/cwm-recovery-6-0-5-0-galaxy-tab-s-8-4-t2824099.
Run sudo ~/git/Heimdall/heimdall/heimdall flash --RECOVERY cwm6.0.5.0-2.img. Wait for it to complete, your tablet will reboot and will probably fail like it has been.
Hold down Power + Vol Down + Home button... wait for the "Press vol up to continue, press vol down to cancel"
Press vol down to cancel, then immediately hold down Power + Vol Up + Home button till you see the recovery screen pop up.
If you get the recovery screen your tablet can probably still be saved. Woo!
So then download http://forum.xda-developers.com/showthread.php?t=2798835 (Which i think you already have)
Unzip it, there will be a tar file. tar xvf T700....something.tar.md5 -C some_directory
You will get a bunch of img files. From those you should be able to finish the recovery and hopefully return full function to your device. (Which unless something is physically broken you will most likely be able to do.) Good Luck! And again this is all done at your own risk, please dont sue me.
eousphoros said:
Install heimdall
Download a recovery, I am going to pimp mine. http://forum.xda-developers.com/galaxy-tab-s/general/cwm-recovery-6-0-5-0-galaxy-tab-s-8-4-t2824099.
Run sudo ~/git/Heimdall/heimdall/heimdall flash --RECOVERY cwm6.0.5.0-2.img. Wait for it to complete, your tablet will reboot and will probably fail like it has been.
Hold down Power + Vol Down + Home button... wait for the "Press vol up to continue, press vol down to cancel"
Press vol down to cancel, then immediately hold down Power + Vol Up + Home button till you see the recovery screen pop up.
If you get the recovery screen your tablet can probably still be saved. Woo!
So then download http://forum.xda-developers.com/showthread.php?t=2798835 (Which i think you already have)
Unzip it, there will be a tar file. tar xvf T700....something.tar.md5 -C some_directory
You will get a bunch of img files. From those you should be able to finish the recovery and hopefully return full function to your device. (Which unless something is physically broken you will most likely be able to do.) Good Luck! And again this is all done at your own risk, please dont sue me.
Click to expand...
Click to collapse
First of all, let me just say that OH MY F#@$ING GOD I THINK THE NIGHTMARE IS OVER!!!! I managed to flash the Australian Firmware successfully. It has now booted fine, I have factory reset and I am in the process of setting up the device afresh.
Having said that, when I do come to reroot and install a custom recovery, I will definitely take a look at yours. Was this here 12 hours ago? I looked and couldn't find anything about CWM except for a short thread and an unofficial port. I have never tried TWRP before and I will avoid it like the plague in the future. I have NEVER had trouble with CWM.
When (if ever) I get the nerve up to give this another go, I will try your CWM.
Thanks again.
I am so relieved right now.....
And make a Nandroid first this time
Hey,
I had the exact same issue with my Galaxy Note 8, every time I tried to install European or custom Rom.
The only way to get the tab back was to flash with the Chinese firmware. You may find it easily on Baidu.
Since it happened also with a note 2 and note 3, I stopped buying Android device in China... Unless you can make sure that you buy a model coming from HK.
Hi everybody.
In order not to create another Thread I would like to leave a request for help in here while searching the answer myself.
I've messed up with SM-T700 and it is suffering a "near brick expirience" now. D:
I wanted to install the TWRP in order to backup the stock ROM before proceeding to anything else. So I put it in download mode. In Odin. 3.09 I put the TWRP under the AP section, the auto-reboot and f-reset were checked. (later I understood that I look at a different chrome tab and followed the instuction for auto-root flashing in via Odin instead of TWRP's. Stupid me) THen I proceeded with flashing and it was succesfull. After that I rebooted to recovery but it was not TWRP but stock. So I went to Download mode again and decided to repeat the procedure. Hower this time, and each time after that Odin stuck with the SetupConnection... The tab itself is stuck in Downloading Do not tur off target!! and does not react to any combinations of buttons.
Looking for a piece of advice here.
At least Odin is detecting the tab is a good sign right?
Attaching the photo and screenshot just in case.
ky3bmu4 said:
Hi everybody.
In order not to create another Thread I would like to leave a request for help in here while searching the answer myself.
I've messed up with SM-T700 and it is suffering a "near brick expirience" now. D:
I wanted to install the TWRP in order to backup the stock ROM before proceeding to anything else. So I put it in download mode. In Odin. 3.09 I put the TWRP under the AP section, the auto-reboot and f-reset were checked. (later I understood that I look at a different chrome tab and followed the instuction for auto-root flashing in via Odin instead of TWRP's. Stupid me) THen I proceeded with flashing and it was succesfull. After that I rebooted to recovery but it was not TWRP but stock. So I went to Download mode again and decided to repeat the procedure. Hower this time, and each time after that Odin stuck with the SetupConnection... The tab itself is stuck in Downloading Do not tur off target!! and does not react to any combinations of buttons.
Looking for a piece of advice here.
At least Odin is detecting the tab is a good sign right?
Attaching the photo and screenshot just in case.
Click to expand...
Click to collapse
Replying to myself: The tab began to respond to buttons so now I succesfully rebooted it and will continue with Rooting then recovery
Added: Rooted successful but the same problem as described above occured when I tryied to flash TWRP in Odin under PDA tab unchecked the auto-reboot
ky3bmu4 said:
Replying to myself: The tab began to respond to buttons so now I succesfully rebooted it and will continue with Rooting then recovery
Added: Rooted successful but the same problem as described above occured when I tryied to flash TWRP in Odin under PDA tab unchecked the auto-reboot
Click to expand...
Click to collapse
Yeah I've had a really bad experience with TWRP on this device. Try flashing a firmware from sammobile.com or elsewhere to at least get it up and running again. Try to do that as quickly as possible too, so you don't have to leave the device in download mode all night. I think that is what caused the battery swelling in my first device that I had to return.
I'm going to stick with CWM when I work up the courage to try again....
pierrotee said:
Yeah I've had a really bad experience with TWRP on this device. Try flashing a firmware from sammobile.com or elsewhere to at least get it up and running again. Try to do that as quickly as possible too, so you don't have to leave the device in download mode all night. I think that is what caused the battery swelling in my first device that I had to return.
I'm going to stick with CWM when I work up the courage to try again....
Click to expand...
Click to collapse
Hi thx for reply. Actually it managed to unstuck from Download mode in 10-15 minutes. It happened twice to me.
ky3bmu4 said:
Hi thx for reply. Actually it managed to unstuck from Download mode in 10-15 minutes. It happened twice to me.
Click to expand...
Click to collapse
Cool! So do you now have root and custom recovery?
pierrotee said:
Cool! So do you now have root and custom recovery?
Click to expand...
Click to collapse
Yeah))
TWRP installs OK via TWRP Manager
I installed TWRP Manager, selected 'klimtwifi' as the device, and it successfully installed TWRP 2.7.1.1 without a hitch.
From TWRP I then immediately performed a nandroid backup of everything but the caches to my microSD card and encountered no problems.
The last step was to enable writing to my microSD card by installing NextApp SDFix.
My SM-T700 is bricked as well and I tried to flash a custom recovery with Heimdall on Mac but it gave me the Error "Claiming Interface failed". Seems like you really need the pit.
Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
beardyweirdy said:
Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
Click to expand...
Click to collapse
What happens when you try to reflash the stock 4.4.2 firmware via odin that u downloaded?
beardyweirdy said:
Hi all, hope somebody can rescue me!
I have an N7100. It's been running stock ROM 4.1.2 for ages (rooted). I've rooted and loaded ROMs on a fair few devices over the years, but typically by following step-by-step guides - I'm a noob to all intents and purposes.
Last night I decided to upgrade to 4.4.2.
I did it without performing a wipe first.
Backed up apps and settings using Titanium Backup Pro
Downloaded N7100XXUFNE1 from Sammobile (sammobile.com/firmwares/3/?download=32635)
Loaded it via Odin 3.9
It worked, in a fashion, maintaining most of my data and apps etc, but I couldn't get wifi to turn on and I kept getting error messages saying '[App X] could not be loaded'
I decided to bite the bullet and do a factory reset (by booting into recovery).
I still couldn't get wifi to work, but my bootloader had stayed at ME3, so I decided to apply the latest bootloader (ND3) as I read somewhere that this could be the issue (I wasn't overly concerned about Knox as the phone is almost 2 years old now anyway).
I applied it via ODIN again, except loading the file into the 'BL' section rather than the 'AP'.
Since doing that, it's stuck at the boot screen 'Samsung Galaxy Note II GT-N7100' and the only way to get out of it is to pull the battery.
I can got into 'Download Mode' but not into 'Recovery Mode'.
I have tried applying MJ5 bootloader.
I have tried reinstalling the whole stock again ROM again
I have tried applying Philz_Touch_6.07.9-n7100 recovery
All show as having completed successfully in Odin, but none of them changed anything - I'm still stuck at the boot screen
Does anybody have any ideas of what else I might try?
Thanks
Beardy
Click to expand...
Click to collapse
Have you tried flashing TWRP instead? This happened to me and got stuck on recovery boot, CWM and Philz Touch wonb't load. Flashed TWRP and worked like a charm.
I am having similar problem.
Tried to flash the TWRP Recovery from THIS via Odin.
Still phone isn't going past the Galaxy Note II logo.
Sidz4u said:
What happens when you try to reflash the stock 4.4.2 firmware via odin that u downloaded?
Click to expand...
Click to collapse
Thanks for the reply.
It processes OK and Odin says 'Pass!', but then it automatically restarts and gets stuck at the boot screen again. Still can't boot into recovery mode.
AliverMD said:
Have you tried flashing TWRP instead? This happened to me and got stuck on recovery boot, CWM and Philz Touch wonb't load. Flashed TWRP and worked like a charm.
Click to expand...
Click to collapse
Thanks for the suggestion. Just tried that, but unfortunately it just does the same thing ....
Man do this.....
Get older odin (personally my preferance nothing else)
Flash the latest stock rom that u have
It will say pass and the device will go into bootloop
Now remove battery any stick it in (just to stop bootloops)
Enter recovery (that shld be stock now)
And do a factory reset
If no recovery......get a custom one and do it
Then let the phone do its thing:good::good:
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
If u have any wifi or other issues.....flash the new bootloader. ....with AP not the BL...and done....
Hope this helps......cheers:good:
devrog17 said:
Man do this.....
Get older odin (personally my preferance nothing else)
Flash the latest stock rom that u have
It will say pass and the device will go into bootloop
Now remove battery any stick it in (just to stop bootloops)
Enter recovery (that shld be stock now)
And do a factory reset
If no recovery......get a custom one and do it
Then let the phone do its thing:good::good:
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
If u have any wifi or other issues.....flash the new bootloader. ....with AP not the BL...and done....
Hope this helps......cheers:good:
Click to expand...
Click to collapse
Thanks for the suggestion. I've tried doing just that (although not on an older version of Odin) and it hasn't helped, I can't get into recovery.
I will give flashing the Bootloader a go via the AP rather than BL when I get back from work tonight though. Cheers.
beardyweirdy said:
Thanks for the suggestion. I've tried doing just that (although not on an older version of Odin) and it hasn't helped, I can't get into recovery.
I will give flashing the Bootloader a go via the AP rather than BL when I get back from work tonight though. Cheers.
Click to expand...
Click to collapse
Yes try with older odin.......and also flashing bl via AP
Hope it helps......
DO HIT THAT THANKS BUTTON IF U FEEL I TRIED TO HELP U......
devrog17 said:
Yes try with older odin.......and also flashing bl via AP
Hope it helps......
DO HIT THAT THANKS BUTTON IF U FEEL I TRIED TO HELP U......
Click to expand...
Click to collapse
Just tried, but to no avail again. Thanks anyway. Anybody else got any suggestions as to what I might try? I'm starting to lose hope a bit here
Try to boot in recovery and do a factory reset
devrog17 said:
Try to boot in recovery and do a factory reset
Click to expand...
Click to collapse
Hi, I do appreciate you're only trying to help but, as explained numerous times in the thread, that's my whole problem.
In summary:
The phone gets stuck on the boot screen
I can't boot into recovery
I can only get into the odin download screen
Flashing a full stock rom doesn't change anything
Flashing Philz, TWRP or CW Recovery doesn't change anything
Reflashing the bootloader doesn't change anything
C
beardyweirdy said:
Hi, I do appreciate you're only trying to help but, as explained numerous times in the thread, that's my whole problem.
In summary:
The phone gets stuck on the boot screen
I can't boot into recovery
I can only get into the odin download screen
Flashing a full stock rom doesn't change anything
Flashing Philz, TWRP or CW Recovery doesn't change anything
Reflashing the bootloader doesn't change anything
Click to expand...
Click to collapse
Just to close this thread off, I've now paid to get the phone sorted at a local shop. Took them a while (think their first level support just tried all the things I'd already done), but their occasional staff member and all round guru managed to get it sorted. I don't know what he did as I didn't get the chance to speak to him. Cost me £30.
I ended up having to use CF auto-root, I was able to update cwm from within it.
After I tried rooting (didn't notice the guide I was using was 3 years old until it was too late) my phone got the "KERNEL IS NOT SEANDROID ENFORCING" and "SET WARRANTY BIT: KERNEL" . And it would not ****ing start up. My phone was 4.4.4 and I was trying to flash some 4.2.2 or later stuff onto it I guess, it messed my phone up. The only one and I mean ONLY one that would work was the 4.2.2 auto-root.
I was on kies before all of it and now kies won't even read my phone. Any way I can get my phone back to normal now, and possibly try the rooting again? It's slow and laggy now, my SD card won't be read, and my wifi doesn't work. I'm quite miserable but at least my phone works.. I have root access now so maybe I can fix it from within the phone? I appreciate the help!
EDIT: I tried getting cyanogen rom onto it and it got all messed up again after that, wouldn't get past cyanogen loading animation so I had to figure out how to fix it again for another 3 hours -.-
dameware said:
I ended up having to use CF auto-root, I was able to update cwm from within it.
After I tried rooting (didn't notice the guide I was using was 3 years old until it was too late) my phone got the "KERNEL IS NOT SEANDROID ENFORCING" and "SET WARRANTY BIT: KERNEL" . And it would not ****ing start up. My phone was 4.4.4 and I was trying to flash some 4.2.2 or later stuff onto it I guess, it messed my phone up. The only one and I mean ONLY one that would work was the 4.2.2 auto-root.
I was on kies before all of it and now kies won't even read my phone. Any way I can get my phone back to normal now, and possibly try the rooting again? It's slow and laggy now, my SD card won't be read, and my wifi doesn't work. I'm quite miserable but at least my phone works.. I have root access now so maybe I can fix it from within the phone? I appreciate the help!
EDIT: I tried getting cyanogen rom onto it and it got all messed up again after that, wouldn't get past cyanogen loading animation so I had to figure out how to fix it again for another 3 hours -.-
Click to expand...
Click to collapse
Go to this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Download the NH7 or NK2 firmware (both are 4.4.4) and flash it using ODIN. Not sure why Kies isn't seeing your phone, it should, but ODIN should work. You may have to flash, pull battery, flash again, all without rebooting, for it to take.
This will get you back to stock. Then, if you want to root, get the CFAutoRoot for the phone, this will flash a non-stock recovery to give you root. This will give you the SEANDROID messages you were seeing. Use Triangle Away, if you want to get rid of them.
Rob
rlichtefeld said:
Go to this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Download the NH7 or NK2 firmware (both are 4.4.4) and flash it using ODIN. Not sure why Kies isn't seeing your phone, it should, but ODIN should work. You may have to flash, pull battery, flash again, all without rebooting, for it to take.
This will get you back to stock. Then, if you want to root, get the CFAutoRoot for the phone, this will flash a non-stock recovery to give you root. This will give you the SEANDROID messages you were seeing. Use Triangle Away, if you want to get rid of them.
Rob
Click to expand...
Click to collapse
It won't read it because my phone is now too old of a device for the program (2.2.2 or whatever). Thank you very much I'm trying all this right now, finally a firmware download that doesn't take 6 hours because of horrible servers!
I will update on if this works or not, I'm guessing it will
I am having a similar situation. I used CM installer to root my S4 then the screen went white and the Installer stopped working. I tried to reset but only got the same Enforcing and warrant messages and the CyanogenMod loading screen.
I am trying to get to recovery mode by doing power+home+volume up button. I got into there and seeing a menu of commands. What should I do now? Will factory reset get me back into original state or I need to install a zip?
Lopakas said:
I am having a similar situation. I used CM installer to root my S4 then the screen went white and the Installer stopped working. I tried to reset but only got the same Enforcing and warrant messages and the CyanogenMod loading screen.
I am trying to get to recovery mode by doing power+home+volume up button. I got into there and seeing a menu of commands. What should I do now? Will factory reset get me back into original state or I need to install a zip?
Click to expand...
Click to collapse
EDIT:
Done and done! It all worked out, thank you thank you!
Now to try cyanogen and my device will be back to beast mode.
Just do what he says and you should be fine; factory reset never did anything for me :/
So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
The phone is about to go in the trash...Help!
sfinkedbeef said:
So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
Odin Screen Reads:
ODIN MODE (red)
PRODUCT NAME: SM-G920P (white)
CURRENT BINARY: Samsung Official (white)
SYSTEM STATUS: Custom (White)
FRP LOCK: OFF (white)
Secure Download: Enabled (blue)
KNOW WARRANRY VOID: 1 (0x0384) (gray)
AP SWREV: B:3 K:2 S:2 (gray)
The phone is about to go in the trash...Help!
Click to expand...
Click to collapse
What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7
1619415 said:
What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7
Click to expand...
Click to collapse
Thanks for replying.
I tried Kies and Smart Switch, but both did not recognize phone. I did manage to find out that TWRP has a sprint variant and that it seems to be incorrectly labeled in many posts. The sprint variant is 2.8.7.0 NOT 2.8.7.1. I managed to flash it in ODIN and now it boots into Recovery, which is a start. I tried applying the renegade rom, but it wouldn't finish and I'm left with a 'no OS detected, do you want to reboot?' from TWRP.
TWRP website isn't much help (but I love that product). At this point, still cannot tell what firmware is on device and where to go from here. I think I may need a recovery of some sort, but don't have. Tried flashing OJ7 tar as recommeded but it continues to fail when it hits the 'system' part of the download.
Still need advice/help....etc.
Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.
1619415 said:
Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.
Click to expand...
Click to collapse
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.
sfinkedbeef said:
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.
Click to expand...
Click to collapse
, NP glad I could help.
no roms install on my s6 edge after forget to copy rooms file into TWRP
1619415 said:
, NP glad I could help.
Click to expand...
Click to collapse
now my phone in download " blue screen " mode
please someone help me :crying:
billyfatra said:
now my phone in download " blue screen " mode
please someone help me :crying:
Click to expand...
Click to collapse
You should be able to use odin on your PC tp send an image to your phone.
Lookup, for example, how to root your phone in these threads.
Sent from my SM-G920P using Tapatalk
I've been using lineageos 14.1 on my sm p600 and I was so happy with it however there was an ota update then I was like "you know what these guys doing it great, let's get the update" after downloading and restarting my device was in bootloop, then I at this point I really don't know what I've done but I remember like I couldn't get into recovery so I decided to load it from odin and I guess that was the part I ruined everything then my tablet was dead.
here is how it is now
it shows the "galaxy note 10.1 2014 edition" text but seconds after that there is no os.
I believe I ruined the os and recovery mode itself. I can't install recovery therefore I can't try any other rom.
I can't find factory firmware tho, mine is sm p600 (turkey version)
And no this is not a topic that I decided to open after 5 minutes of fight. I've been stucked with my dead sm-p600 since 3 days.
I need a help here what can I do ? can you explain me things like I'm five years old so I can be sure that I'm not missing anything.
And yes I can use odin right now only thing I Can use is odin and I can take the table to the "downloading" mode.
Thanks in advance.
Try flashing the factory firmware from here in Odin. Your region shouldn't matter since it's a WiFi only tablet.
If it starts working properly I recommend this TWRP, it says P601 but if you scroll down the TWRP is for both P600/P601. Make sure it's the img.tar file and you choose the correct box in Odin (AP/PDA). Also if I remember correctly, you should untick the Auto-reboot box and boot to TWRP manually using Power and Volume UP since the factory firmware reverts the recovery on boot.
Good luck.
RXT00 said:
Try flashing the factory firmware from here in Odin. Your region shouldn't matter since it's a WiFi only tablet.
If it starts working properly I recommend this TWRP, it says P601 but if you scroll down the TWRP is for both P600/P601. Make sure it's the img.tar file and you choose the correct box in Odin (AP/PDA). Also if I remember correctly, you should untick the Auto-reboot box and boot to TWRP manually using Power and Volume UP since the factory firmware reverts the recovery on boot.
Good luck.
Click to expand...
Click to collapse
I thought I really messed my tablet and there you are! thanks for forwarding me to the right guide it's working very smooth. you rock mate!