Related
I have updated my Nexus 5x to 7.1.1 beta and after a day it powered off and I got the infamous red led during charging. I was not able to turn the phone on even after leaving the charger on for some days. I thought it is bricked and left it alone connected to my computer.
However today, out of nowhere Google logo popped up. It was bootlooping, but I was able to enter bootloader and original recovery. I wanted to flash it from bootloader, but was unable, because it was still oem locked. And I was not able to oem unlock, because I did not do the required part in the Developer Tools menu. I tried to adb sideload OTA in the original recovery, but sideloading stopped after uploading ~48% every time.
So I opted for the "VolumeUp + Power" mode flashing. Phone was recognized and I started flashing the appropriate TOT file. However at 33% on phone and 28% on the PC, progress stopped. And after a minute or so phone turned off. Currently it has no signs of life at all. Have I completely bricked it now? Is there a way to recover from interrupted "VolumeUp + Power" flashing mode?
EDIT: at first I though maybe the battery died during flashing. But interruption was not abrupt. First the progress slowed down to halt. And then after some time phone turned off.
It seems not all is lost. Have a blinking red light again after leaving it connected to computer for a day. Back to square one, but at least it is alive.
Your motherboard is dead.
And it is not your fault, mine also died while using beta 7.1 and I sent it RMA. They replaced for a new one.
But in my case i had unlocked bootloader, I flashed back 7.0 and it gave no results, still bootloop that's why I sent
Thanks for the info.
After leaving my phone with a clamp on a power button throughout the night (so the red light would flash continuously), I got it booting into "VolumeUp + Power" mode and this time I have successfully flashed the same TOT file via LGUp software. It was still bootlooping after flashing. Now I was able to enter into bootloader and recovery and this time sideloading the same previous file actually works. However it still bootloops.
Anyway, I tried to RMA it and after giving my IMEI to the Google rep, they said that they could not find it in their system after checking US and UK store records. Also tried calling LG warranty, but they do not know of my IMEI either. I got this phone from Swappa, so I left wondering where did the original owner of this phone got it from. He claimed that he got it as a present...
BlinK_ said:
Thanks for the info.
After leaving my phone with a clamp on a power button throughout the night (so the red light would flash continuously), I got it booting into "VolumeUp + Power" mode and this time I have successfully flashed the same TOT file via LGUp software. It was still bootlooping after flashing. Now I was able to enter into bootloader and recovery and this time sideloading the same previous file actually works. However it still bootloops.
Click to expand...
Click to collapse
out of curiosity, have you ever tried to flash custom recovery through the bootloader ? If you can, you might also wanna try to make a EFS backup, wipe all partition, then flash custom rom or near-stock rom like this one, just for the sake of testing.
anazhd said:
out of curiosity, have you ever tried to flash custom recovery through the bootloader ? If you can, you might also wanna try to make a EFS backup, wipe all partition, then flash custom rom or near-stock rom like this one, just for the sake of testing.
Click to expand...
Click to collapse
I wanted to flash custom recovery but was unable to do so, because device is still OEM locked. And I am unable to unlock it, because I did not do the confirmation in the Developer Options before device started to bootloop. Is there a way to flash custom recovery without this step in Developer Options?
BlinK_ said:
I wanted to flash custom recovery but was unable to do so, because device is still OEM locked. And I am unable to unlock it, because I did not do the confirmation in the Developer Options before device started to bootloop. Is there a way to flash custom recovery without this step in Developer Options?
Click to expand...
Click to collapse
For now, no way that I can think of. You could try to oem unlock it until it work, just cross your finger I guess?
I have some progress here. Since I was able to sideload various OTA images, I started doing that one by one and seeing if some of them would not bootloop. And after flashing 7.0.0 (NRD91N) from here (https://developers.google.com/android/ota) phone booted successfully and now is working. Will report if I get any problems.
Hi Guys. I have a problem with my Mi Max 32/3gb. After OTA update it stucks on bootloop while the boot loader was locked and unrooted. I tried every method found in c.Mi.com and xda websites. nothing helped me to overcome this problem. I could enter to fastboot and also EDL modes, I also opened the back cover to remove the battery and shorting the test points but no luck. In fastboot mode I got error because the bootloader was locked, while in EDL mode I could successfully flash the fastboot roms including Ch_Dev, Ch_sta, Glob_Dev, and Glob_sta, but after turning on the phone, it shows bootloop again and again. But on time accidentally my phone loaded on boot and came alive (I don't know how!!). this time I first signed in with my mi account and applied for unlocking bootloader, then factory rested the device to see if it boot-up again or not. unfortunately it again stucked on bootloop. After unlocking the bootloader, I tried recovery roms using mi PC suite beta (Chinese version) which got error says something like your bootloader is locked (but it is not), Also I tried loading recovery rom using TWRP which the procedure stucks at "package_extract_file took 00s" for about 60mins and nothing happen. the only differences between all of these methods is bootloop at MI logo, bootloop at Mi logo and android logo with three blinking dots, freeze at MI logo, and freeze at Mi logo and android logo with three blinking dots. Any Idea?
Clear data after flashing, also only use save userdata when flashing fast boot rom
MM.626 said:
Clear data after flashing, also only use save userdata when flashing fast boot rom
Click to expand...
Click to collapse
Thank you for your reply. Tried before but not helped.
I can flash fast boot rom successfully in Fastboot and edl modes using Mi flash tools beta and also Mi PC suit without any error, but the phone cannot boot and still freeze at mi logo and some time bootloop. Flashing recovery rom is not possible in recovery mode even using TWRP and Mi PC suit, freeze in the beginning of flashing. How can I check to see if all necessary files of fast boot rom were copies to memory? I thing some thing force memory to lock especially in recovery mode!!!!
Any idea?
Maybe you should unlock the bootloader?
MM.626 said:
Maybe you should unlock the bootloader?
Click to expand...
Click to collapse
The bootloader has already been unlocked. No difference, still freeze at mi logo.
It is also weired, why I cannot flash recovery rom!! Geuse there is something wrong.
lordcx said:
The bootloader has already been unlocked. No difference, still freeze at mi logo.
It is also weired, why I cannot flash recovery rom!! Geuse there is something wrong.
Click to expand...
Click to collapse
i know, i just went back to miui9 from nitrogen oreo last week, my bootloader was unlocked too. but mine also couldn't boot past mi logo, so i tried everything like you did, the only thing worked for me was to re-unlock bootloader, flash fastboot rom, clear data in recovery, reboot.
MM.626 said:
i know, i just went back to miui9 from nitrogen oreo last week, my bootloader was unlocked too. but mine also couldn't boot past mi logo, so i tried everything like you did, the only thing worked for me was to re-unlock bootloader, flash fastboot rom, clear data in recovery, reboot.
Click to expand...
Click to collapse
You mean you used clean_all and lock option at miflash tool and then re-unlocked it using mi unlock tool again?
Can you explain more? I have not lock the bootloader again fearing cannot relock it for the next time.
Any luck here ?
Did you test flashing miui 8 ?
No luck, I tried evey methodes and evey roms, but no luck
Did you send it to service center ?
head_djmusic said:
Did you send it to service center ?
Click to expand...
Click to collapse
No it was out of warranty.
I sold it for spare parts. Sad story.
Sad
lordcx said:
No it was out of warranty.
I sold it for spare parts. Sad story.
Click to expand...
Click to collapse
Well, i will test with QFIL and if it didn't solve the problem, i will sell it as spare, too!
And life is going on!
head_djmusic said:
Well, i will test with QFIL and if it didn't solve the problem, i will sell it as spare, too!
And life is going on!
Click to expand...
Click to collapse
I have tested with qfil too, it returned an error for data partition, i do not remmember the exact massage but I could not find any solotion for it. Seems my partitions was write protected or something like that. Hope you can resolve yours and let me know if you need my experiance.
Thanks, Seems the problem is from BOOT Partition, i will sell it as spare part, too !
Thanks for your help friend
Hey guys,
I would have liked to get the OREO update, because it said every time is up-to-date, and I wasn't patient. because all of these already get it, and the battery life was terrible with, and I have just 30 days to cancel the phone if I'm unsatisfied with it, so it was urgent for me to update and try it.
But I didn't know enough from the newest devices, so that I need unlocked bootloader to flash STOCK ROM or ROOT or for flash RECOVERY
Mine is XT1789-06, I tried to flash first this ROM:
https://androidfilehost.com/?fid=962187416754456314
It didn't tell this is TMO. :/
This changed my baseband to TMO and my boot image to T-mobile, after I didn't have signal and the fingerprint sensor didn't work.
I wanted fix it with RETAIL ROM flashing.
I tried to flash this: https://androidfilehost.com/?w=files&flid=241773
After that my phone didn't boot, says your device is corrupt.
Cause this I tried to flash back the previous version so this: NASH_RETAIL_7.1.1_NPXS26.122-68-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
from here https://firmware.center/firmware/Motorola/Moto Z2 Force/Stock/
But no result. The baseband stucked on TMO, the phone is not start up. Fall back to fast boot mode.
After and mean while these things I tried many things.
The Motorola Device Manager isn't working at all.
The Software Upgrade Assistant what the phone want when show boot up failed message isn't working just say processing device information and isn't going further. I don't understand why the phone ask it, because that is for verizon phones.
The RSD lite says the model name is Fastboot nash S and isn't start to flash anything, when I press the start it says the phone failed to switch to fastboot mode, but it's in that.
I tried already flash more different ROMs, but didn't work one of them .
Recovery is unable, the phone isn't rooted, the bootloader is locked, however sometimes it showed ""Your device software cannot be checked for corruption. Please lock the bootloader", but I checked in the powershell and in fastboot mode I looked what phone says, so it's locked.
I was thinking maybe if I unlock it will solve the problem, but I can't turn it on, so the developer options are unavailable and I don't know maybe it won't help, if I can do it somehow.
Now if I want turn on the phone it's going to fastboot mode right away or say your device is corrupt... and after.
I can't try flash it through Qualcomm 9008 because the PC recognise the device for fastboot device.
In the device manager the computer shows Motorola ADB interface.
I try to unbrick for 3 days, please help me.
Thanks a lot in advance.
Same here, if you find anything out DM me
I already contacted with the phone, I will bring back to Repait it.
I couldn't find out nothing, I tried everything what was possible.
i think i found a solution i just dont know how it works exactly, something to do with a batch file and a full flash of the phone
https://forum.xda-developers.com/z2-force/how-to/how-to-return-to-stock-sprint-t3694783 im going to try this and let you know
Long story short, I ended up with a classic bootloop (shows boot animation continuously) from messing around with Magisk modules, so I did a wipe from recovery, still bootloop, so I tried reverting completely to stock with the OEM downloads. I tried flash_all_except_storage.bat, and flash_all.bat, but this time it was a different bootloop. The phone shows the Android One logo, the screen flickers like it's going to the boot animation, but then it just goes back to the Unlocked Bootloader Warning Screen, then the Android One logo, and loops like that. I dumbly thought locking the bootloader, reflashing everything, and starting over like it were a new phone would fix the issue, so I did flash_all_lock.bat, but now I'm just stuck with this weird bootloop and a locked bootloader. Trying to unlock the bootloader with fastboot just gives me "oem unlock is not allowed", so I'm at a loss here.
Does anyone know of anything else I could do, or is this a hard brick?
With a locked bootloader EDL flash probably is your last chance.
Maybe this thread helps:
https://forum.xda-developers.com/mi-a2-lite/help/hard-bricked-mi-a2-lite-help-to-enter-t3862648
thorin0815 said:
With a locked bootloader EDL flash probably is your last chance.
Maybe this thread helps:
https://forum.xda-developers.com/mi-a2-lite/help/hard-bricked-mi-a2-lite-help-to-enter-t3862648
Click to expand...
Click to collapse
I got stuck with a similar problem and that was the only option, to boot into EDL mode you will need to partially dissasemble your device and flash the image via fastboot or via MiFlash (download the latest version as I had problems with an older one). Since that incident I kept the bootloader unlocked just in case something happens.
I had the phone booted into EDL mode and attempted to flash the stock ROM (10.0.3.0) with MiFlash, but it errored out with an ERROR_UNSUPPORTED_TYPE. I tried with the previous version, 10.0.2.0 and it worked for some reason. That fixed it though, so thanks! I've been lightly tinkering with rooting android phones a few years now, but until encountering this issue, I'd never heard of EDL mode. You learn something new every day? ?
I have the same issue with my nephew 's mi a2 lite which has the bootloader locked.
It only shows the android one logo.
I cannot go to recovery mode, but I can go in fastboot.
Changing from "a" to "b" doesn't solve anything and being the bootloader locked is not possible to flash anything from fastboot.
So I've opened the device and I've short circuited the edl pinpoint to be able to flash with MiTool (I've used an old version since more recent ones gave errors when flashing).
I was able to flash both the latest official ROM and the oldest one which I've found ( daisy_global_images_V11.0.14.0.QDLMIXM_10.0 and daisy_global_images_V9.6.4.0.ODLMIFF_8.1 respectively).
In both cases the device still is "frozen" with the android one logo when I've tried to turn it on after the flashing procedures gave me a successful status.
What else can I do?
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
Two quick questions:
1.The phone died on its self without your intervention or...?
2.Have you tried to flash the stock firmware via MiFlash , while the phone is in edl mode(the command is: fastboot oem edl)?
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
I think you are confusing some things here; adb is not an option now so you can´t boot device normally and also you said "fastboot edl" but they are different modes.
While in fastboot how did you try booting to TWRP image? (you said through adb but this is not right)
Can you get to fastboot? (hold vol down while booting, should see a rabbit on the screen)
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
When your phone is in EDL mode(you won't be seeing any logo on your phone ,only black screen) it's absolutely normal to see the device as COM port , because the device is in another factory mode. And there is no problem flashing stock ,when your phone is seen as COM port. So if you can't flash the stock firmware in fastboot mode or EDL mode , maybe you have a hardware issue. To be sure -take a screenshot of the error in MiFalsh when the phone is in edl Mode (seen as a COM port) and you try to flash the stock firmware.
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
pocchio said:
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
Click to expand...
Click to collapse
Here is the stock firmware from Xiaomi site:
https://en.miui.com/getrom-354.html?m=yes&mobile=2
Don't worry that it says MIUI , the firmware is Android One , they just forgot to change the name from MIUI to Android One , I have already tried it ,and I can confirm that it's 100% stock Android One firmware , good luck!
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
pocchio said:
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
Click to expand...
Click to collapse
I will give a solution in a minute
EDIT: Are you sure your bootloader is unlocked? (fastboot oem unlock)
You have two choices , you need to find an older version of MiFlash beta , i'll give you a video :
https://m.youtube.com/watch?v=-7O1Svib14g
In the video description you can find a link for the MiFlash beta ,I hope it helps.
If not , you'll have to consider the Testpoint unbrick method , there are several guides.
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
pocchio said:
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
Click to expand...
Click to collapse
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
nikoman1987 said:
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
Click to expand...
Click to collapse
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
pocchio said:
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
Click to expand...
Click to collapse
the command is: fastboot oem get-product-model
nikoman1987 said:
the command is: fastboot oem get-product-model
Click to expand...
Click to collapse
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
pocchio said:
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
Click to expand...
Click to collapse
tried the command too, it doesn't work.
So test point doesn't work too.. That's bad news
EDIT: fastboot getvar product command works , you can try it
And another question , have you tried to boot with patched boot.IMG ?
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
You need a recovery to flash , which has a specific partition in the phone storage. You can flash only via fastboot . You need to boot into recovery , so try with a patched boot image for your version of the rom
---------- Post added at 02:47 PM ---------- Previous post was at 02:38 PM ----------
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
So the last resort , we'll try to flash the ROM that I have mentioned before via fastboot. Place the zip file GM 1.1 in your PC (it has to be in the same directory as your adb and fastboot tools)
then open cmd and run the command
fastboot flash (the full name of the zip).zip
and hit enter
maybe that will solve it
And if this doesn't help again... type these fastboot commands :
fastboot format userdata
fastboot format system
fastboot format cache
fastboot format vendor
fastboot format recovery
fastboot format boot
then try again to reflash the stock rom (first try in edl mode ,if this doesn't do anything ,you'll have to format everything via fastboot commands again ,and try to flash the ROM in fastboot mode)
And if this doesn't help too... Then you're free to hit that ? in the ground hahahah (just kidding)
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
pocchio said:
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
Click to expand...
Click to collapse
which version of the firmware you are flashing? 10.0.9.0 or another version , so I can send you a link and walk you through the procedure.
And when you flashed the GM 1.1 the boot screen didn't changed from Android one? (the GM 1.1 version is a MIUI stock port and has to change your boot screen to black screen with white MI logo on it) It is very important to know
One of my friends told me to try this: just open the directory of the stock firmware , navigate to flash_all.bat and run the bat file (NOT THE FLASH_ALL_LOCK!!!) and wait for the end of the process. He had a similar problem , and it worked. He explained that for any reason , the recovery was the problem , because it was flashed in the boot partition. When you use flash_all.bat The file will erase all partitions and rewrite them. MiFlash won't , so try that