Related
I have an Audiovox Harrier, from a Canadian provider, Telus. I have a GSM carrier, and there are no real ROM updates for this, so I' probably pass it on, but I was unable to find any information regarding whther these are ever locked to carriers.
Anyone know? Or is there a way for me to find out if it's locked w/o needing to get a service. And if it were locked, would it be hard to unlock it?
Anyone unlock one of these? I seem to remember reading somewhere a few months back Bell (who now owns virgin) saying they will never unlock it.
However I see that there are "WWE" branded unlocks for my version, wtf?
Here is the url of the exact phone I have - http://www.virginmobile.ca/en/phones/phone-details.html?model=HTCWILD&colour=White
Please no "I unlocked my DerpCellular wfs, you can too!!" stupidity that most of these threads digress into, either you have the exact phone or not. Anyone who lives in Canada and deals with Bell will understand why this needs to be asked
Hey, another virgin canada user.
i have that exact phone (same colour too) with virgin. Mine unlocked just fine via the htcdev unlock. You just need to select the "Bell Mobility WWE" RUU when unlocking it.
unlocked and rooted. bye bye useless bell apps.
be sure to notice that the unlock does a factory reset. back your stuff (contacts!) up before you start on it.
So when you say unlocked using the DEV tool, does that mean its network and sim unlocked? Also just curious, I have a Bell SIM card, can I use this in this phone without unlocking the network/sim?
jhong88 said:
So when you say unlocked using the DEV tool, does that mean its network and sim unlocked? Also just curious, I have a Bell SIM card, can I use this in this phone without unlocking the network/sim?
Click to expand...
Click to collapse
nope, the htcdev bit only unlocks the bootloader. the sim lock and all the other bits of s-on remain in place. you'll need an xtc clip or an unlock code if you want the ditch the network shackles.
as for the virgin->bell, no idea. there seems to be conflicting information on whether bell/virgin sims are interchangeable or not. some people report it works, other report it doesn't.
compro01 said:
Hey, another virgin canada user.
i have that exact phone (same colour too) with virgin. Mine unlocked just fine via the htcdev unlock. You just need to select the "Bell Mobility WWE" RUU when unlocking it.
unlocked and rooted. bye bye useless bell apps.
be sure to notice that the unlock does a factory reset. back your stuff (contacts!) up before you start on it.
Click to expand...
Click to collapse
Excellent, I was NOT expecting to be able to do this.
And now for a stupid question, what is a good way to back everything up for a quick reinstall?
AFAIK, There isn't one really, other than exporting your contacts and writing down all your apps names, as all the real useful backup methods require root.
OTOH, unless you like customizing extensively, it should only take a day or two to get things back to normal.
sent from my rooted wildfire s
I have a Canadian Bell S3 i747m which broke and I got some random guy to fix it for me. He frustratingly ended up installing a ROGERS circuit board(or so he says) without bothering to check the fact my phone was loaded with Bell bloatware or just asking me my carrier.
I now need to unlock the SIM in order to use it properly and I just want to be sure I have the correct information and I don't end up paying for an unlock code that will not work since I didn't provide the proper carrier.
My SIM card (not sure if that matters): BELL
My board/IMEI: ROGERS (Apparently)
I wanted to determine which carrier I was tied to but I see 0 bloatware in my phone which makes me think the guy is wrong/lying and it's not actually a Rogers board. Is there another way to determine which carrier my phone is tied to?
Cyclone112 said:
I have a Canadian Bell S3 i747m which broke and I got some random guy to fix it for me. He frustratingly ended up installing a ROGERS circuit board(or so he says) without bothering to check the fact my phone was loaded with Bell bloatware or just asking me my carrier.
I now need to unlock the SIM in order to use it properly and I just want to be sure I have the correct information and I don't end up paying for an unlock code that will not work since I didn't provide the proper carrier.
My SIM card (not sure if that matters): BELL
My board/IMEI: ROGERS (Apparently)
I wanted to determine which carrier I was tied to but I see 0 bloatware in my phone which makes me think the guy is wrong/lying and it's not actually a Rogers board. Is there another way to determine which carrier my phone is tied to?
Click to expand...
Click to collapse
The carrier doesn't matter. Once unlocked, it's unlocked for every carrier (unless it's unlocked by code).
You could go check the APN to see which carrier it's from.
BWolf56 said:
The carrier doesn't matter. Once unlocked, it's unlocked for every carrier (unless it's unlocked by code).
Click to expand...
Click to collapse
Oh really? I was looking at the gsmliberty site for unlocking and it asks for a carrier. I can't post the link since I'm a new account but here it is split:
gsmliberty(dot)net/shop/samsung-galaxy-s3-unlock-codes-p-3528.html
I then went into their Terms of Service and it specifies that if I provide an incorrect carrier and the unlock code doesn't work then I won't get a refund. Does this mean this site is BS and I should avoid it and find another?
EDIT: Oh I see you added info about checking the APN. Don't know what that is but I'll Google it. Assuming I find it should I still avoid gsmliberty or should I give them a shot?
BWolf56 said:
The carrier doesn't matter. Once unlocked, it's unlocked for every carrier (unless it's unlocked by code).
You could go check the APN to see which carrier it's from.
Click to expand...
Click to collapse
I went to Settings > Connections > More networks > Mobile Networks and it tells me this: Insert SIM card to access network services
EDIT: Ok I finally found the AP and CSC by dialing *#1234# and then comparing it to sammobiles firmware to find out which carrier it is tied to. Still worried about the fact I get the SIM error above but hopefully that will go away when I attempt to unlock it
Cyclone112 said:
I went to Settings > Connections > More networks > Mobile Networks and it tells me this: Insert SIM card to access network services
EDIT: Maybe I'm looking at the wrong spot. Here is my phone's about in case that helps:
View attachment 2807396
Click to expand...
Click to collapse
Umm I though you'd have access to it w/o a sim card.
I'm not sure how else you could determine which carrier the motherboard is locked to.
BWolf56 said:
Umm I though you'd have access to it w/o a sim card.
I'm not sure how else you could determine which carrier the motherboard is locked to.
Click to expand...
Click to collapse
I just ended up editing my last post a minute before you posted this. I did determine the carrier and it is in fact Rogers. I was planning on just getting an unlock code through a website. You mentioned that means it will only be unlocked for them which I'm fine with but I'm just concerned about the fact I have a Bell SIM. Will that cause any problems with the unlock process or future dealings with BELL?
Actually I have a better question. Can I just put Bell's firmware on my phone instead of Rogers using Odin and then get an unlock for Bell and theoretically I'll be back to where I was?
What bootloader is on the phone? If you have the 4.3 bootloader, you'll have to buy an unlock code. If you have the 4.1.1 bootloader and you are running a stock ROM (doesn't matter about the carrier), you can use the free method to unlock it. If you have the 4.1.2 bootloader, downgrade to the Rogers 4.1.1 ROM and unlock it using the free method.
audit13 said:
What bootloader is on the phone? If you have the 4.3 bootloader, you'll have to buy an unlock code. If you have the 4.1.1 bootloader and you are running a stock ROM (doesn't matter about the carrier), you can use the free method to unlock it. If you have the 4.1.2 bootloader, downgrade to the Rogers 4.1.1 ROM and unlock it using the free method.
Click to expand...
Click to collapse
I'm running 4.3 so I know I need an unlock code unfortunately. I have a Bell SIM card but have Rogers firmware. The site I was looking to buy an unlock code from asks for my carrier so I presume I need to use Rogers. Will that be fine or am I able to just throw Bell firmware on my phone and buy an unlock code specifying Bell as my carrier?
I am not sure of you can load the stock Bell firmware and change the phone so it is locked to Bell. If this were the case, owners could switch carriers by flashing different firmware.
Cyclone112 said:
I just ended up editing my last post a minute before you posted this. I did determine the carrier and it is in fact Rogers. I was planning on just getting an unlock code through a website. You mentioned that means it will only be unlocked for them which I'm fine with but I'm just concerned about the fact I have a Bell SIM. Will that cause any problems with the unlock process or future dealings with BELL?
Actually I have a better question. Can I just put Bell's firmware on my phone instead of Rogers using Odin and then get an unlock for Bell and theoretically I'll be back to where I was?
Click to expand...
Click to collapse
Unlocking is permanent and unlocks to every carrier. Knowing which one you're locked to only matters to get a unlock code, after that, it's free for all.
BWolf56 said:
Unlocking is permanent and unlocks to every carrier. Knowing which one you're locked to only matters to get a unlock code, after that, it's free for all.
Click to expand...
Click to collapse
Gotcha, so there's no point in flashing Bell firmware at all. I just need the correct one for getting an unlock code in the first place. Thanks for helping a noob out.
If you have S6 from Tmobile unlocked with metropcs , can you please post a screenshot of "abour device" ?
batillojr said:
If you have S6 from Tmobile unlocked with metropcs , can you please post a screenshot of "abour device" ?
Click to expand...
Click to collapse
hey, I have an S6 128GB originally TMobile, flashed the Metro ROM and its now unlocked. What do you want to see in particular in About Device?
digisolnc said:
hey, I have an S6 128GB originally TMobile, flashed the Metro ROM and its now unlocked. What do you want to see in particular in About Device?
Click to expand...
Click to collapse
i wanted to see if the baseband changed from tmobile to a metropcs baseband
batillojr said:
i wanted to see if the baseband changed from tmobile to a metropcs baseband
Click to expand...
Click to collapse
Baseband with the Metro ROM is G920T1UVU1AOCH, but the problem is, I flashed both of the S6's I have here to the Metro ROM to unlock them so I have no idea what the original baseband was lol I hope you do!
Any luck on the S6 Edge unlock? I scour the internet everyday for developments but I havent seen anything I feel like this S6 Edge I have is either going to sit here forever or Ill have to sell it as a blacklisted phone because its financed and I KNOW its going to get blocked.
digisolnc said:
Baseband with the Metro ROM is G920T1UVU1AOCH, but the problem is, I flashed both of the S6's I have here to the Metro ROM to unlock them so I have no idea what the original baseband was lol I hope you do!
Any luck on the S6 Edge unlock? I scour the internet everyday for developments but I havent seen anything I feel like this S6 Edge I have is either going to sit here forever or Ill have to sell it as a blacklisted phone because its financed and I KNOW its going to get blocked.
Click to expand...
Click to collapse
the fact that baseband has a G920T1 means that it did changed the radio , while every damn firmware i tried never change the baseband ., is good to know though ... and if you have an S6 Edge try this before selling it .. ask to borrow someone's tmobile sim card and try to at least do a temporary unlock if that doesn't work then download the app VyprVPN select germany (i did) with the tmobile sim still in and try temporary unlock again,,, doing this at least it bought a month's use of my phone , maybe a solution will come up later on.
batillojr said:
the fact that baseband has a G920T1 means that it did changed the radio , while every damn firmware i tried never change the baseband ., is good to know though ... and if you have an S6 Edge try this before selling it .. ask to borrow someone's tmobile sim card and try to at least do a temporary unlock if that doesn't work then download the app VyprVPN select germany (i did) with the tmobile sim still in and try temporary unlock again,,, doing this at least it bought a month's use of my phone , maybe a solution will come up later on.
Click to expand...
Click to collapse
So youre saying that when you flash the Metro ROM to it, its not changing your baseband? I used the one posted by UnlockBase. Were you able to successfully unlock yours?
And yeah, Ive tried the TEMP and PERM unlock on the S6 Edge. I put my TMobile dealer SIM in it hoping that would help as its a free $80 monthly demo line I get for selling TMobile service. I would gladly try that method, but since we sell these phones, a TEMP unlock wont help me I need a permanent solution so once I sell it, Ill know the customer wont have any issues down the road. I have both of the S6's up for sale now that they are unlocked, but I have always wondered if Samsung REGION LOCKS these phones. Ive tested my personal ATT line in it, and it works great, but alot of my customers on eBay export these phones overseas, so Im hoping these new Samsungs arent region locked :/
digisolnc said:
So youre saying that when you flash the Metro ROM to it, its not changing your baseband? I used the one posted by UnlockBase. Were you able to successfully unlock yours?
And yeah, Ive tried the TEMP and PERM unlock on the S6 Edge. I put my TMobile dealer SIM in it hoping that would help as its a free $80 monthly demo line I get for selling TMobile service. I would gladly try that method, but since we sell these phones, a TEMP unlock wont help me I need a permanent solution so once I sell it, Ill know the customer wont have any issues down the road. I have both of the S6's up for sale now that they are unlocked, but I have always wondered if Samsung REGION LOCKS these phones. Ive tested my personal ATT line in it, and it works great, but alot of my customers on eBay export these phones overseas, so Im hoping these new Samsungs arent region locked :/
Click to expand...
Click to collapse
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
batillojr said:
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
Click to expand...
Click to collapse
I gotcha. I did something similar. I flashed the international ROM on the S6 EDGE via TWRP and it told me the code is incorrect. I know the code is correct because if I ever it in with no SIM and the #7465625*638*# and put the code in it says successfull. This is SOOOOOO frustrating. The lock has to do with the radio or the bootloader/baseband.
batillojr said:
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
Click to expand...
Click to collapse
I am interested to see if that works which it may as the app is not there to retrigger the lock. You never know.
I currently have metro pcs and I bout an unlocked Samsung galaxy s6. My original Sim is too big so I have to go to metro to get a new one but the phone is not reading the new sim in order for them to program it. How do I fix this or get around this? Should I not let metro try to activate the phone?
I called and got my phone's unlock codes (domestic) however Sprint declined to provide how to unlock instructions. told me to go to my future carrier and give them the unlock code.
I called T-Mobile current provider and they told me... no Sprint can unlock and TMo, doesn't know how.
so I am stuck with legitimate Sprint unlock codes... and no idea how to use them.
Someone knows how this works here or it's better off just flash customs rom and unlock XDA way?
Thanks,
When you insert another carrier's SIM (in this case, T-Mob) it should ask for the code, then you just enter it.
Custom ROM isn't going to help you unlock the SIM, nor is there a working "hack" to do so without a code.
Thanks for your reply,
I've tried ATT, TMO sim and the phone does not ask for sim unlock code... it just says contact customer care.
or if someone knows how to get the phone to ask me for SIM/UICC unlock code... some hot keys to press, that can help too since I have the codes from Sprint.
**i am also reading about Sprint Sim unlock on One M8, so complicated!!!**
If you talking about the following mods, they are for unlocking the bands, which AFAIK is not the same as SIM (subsidy) unlock:
http://forum.xda-developers.com/htc-one-m8/general/unlock-bands-qualcomm-device-phone-t2880239
http://forum.xda-developers.com/htc-one-m8/general/how-to-convert-cdma-m8-sprint-vzw-gsm-t3303812
yeah, can't find a way to unlock sim to use w/ T-mo ATT. strange... I have the codes from Sprint and no one's done it? good thing I got HTC 10 factory unlocked this time no such problem later on