Related
hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here
I think we need to flash first the EMUI 4.1 recovery.img
Houamei said:
I think we need to flash first the EMUI 4.1 recovery.img
Click to expand...
Click to collapse
i've flash erecovery.img and recovery.img extracted from the update.app --> reboots too on 5%
extracted 4.1 Recovery: mega.nz/#!1MdXmART!Bbd3COTNnCsOB4iVMwQ0vOQhdEvzWDaWVnRhMwFMg08
xCite86 said:
hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here
Click to expand...
Click to collapse
There is a link for a rollback update, but i'm not home. When I get there, I send it. About battery, try to use greenify to help it to last long.
You can't just try to use a full package because of versioning scheme they use.
Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip
Same problem here, still drops at 5% even with the new file
I just wana know the best way to revert to stock
---------- Post added at 07:32 PM ---------- Previous post was at 07:28 PM ----------
and sorry I don't have an SD Card
Vinnom said:
Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip
Click to expand...
Click to collapse
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes
can we extract all from the ota update zip and install via flash? can this work?
xCite86 said:
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes
Click to expand...
Click to collapse
Hmmm, sorry, I thought it would help. In fact, the package is listed as a rollback to M, but it is for CAN-L11. The rollback for CAN-L01, I didn't find. As there isn't many differences between those models, I thought it would work
EDIT: now that I read the op again, I noticed that your model is CAN-L11. I wonder why it didn't work
Houamei said:
can we extract all from the ota update zip and install via flash? can this work?
Click to expand...
Click to collapse
No, it won't.
The reason behind this is because system partition get smaller (because nougat way of update) after updating it to emui 5. So the old system.img won't fit the new partition
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
So you downgraded?
Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
did you downgrade your nougat successfully with the files above??
edit: i tried it without a connected usb cable and got "software install failed!" after short time
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
i think this should work if you or someone else share a backup i could try..
Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
no, in my opinion the nougat bootloader want work with mm.
I would flash the firmeware of mm and after that flash twrp and restore the backup after that [emoji106]
It will work. There is a backup within twrp thread, from bluesmothie.
Vinnom said:
It will work. There is a backup within twrp thread, from bluesmothie.
Click to expand...
Click to collapse
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.
Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
Yeah, thanks Vinnom...
xCite86 said:
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.
Click to expand...
Click to collapse
Did the same thing, but first TWRP didn't find the backup. So i did a small backup just of the boot partition, so that TWRP makes a new backupfolder "FPF4C16A07000014"". Now i renamed the " FPFDU16930014596" to the new "FPF4C16A07000014" and TWRP found the backup and i was able to restore :highfive::highfive:
Small Addition:
It was a freaking fight to get my bootloader unlocked again, cause i lost the unlock code.
The websites (english and asian) are freaking BS. Was not able to get to the page where you get the code, so i downloaded DC-Tool and payed 4 dollars for the damn code.
Now the code is saved in my owncloud, dropbox, google drive, on a sheet of paper and google notes. No way to lose it again
B100 firmware is much smoother than B320 but has a lack of comfort, like i'm missing the new quick settings with double pull down and the touch responsibility of slide bars (like the volume bars) is not very good in B100... But i won't upgrade to 320 again, because of the following points that make it a no go for daily driver:
- Camera is very slow and hangs up
- Video playback is very slow and buggy (no matter if it's in the galery or youtube, ect.)
- Fingerprint is too slow
- Whole system gets very slw if you dont clean up the app history
Will upgrade again when there is a new version out
please am having same issue here. tried restore but still not booting.
problem is cust. what do i do about it.
HELP ME
So I installed the latest Oreo Global ROM on my Mi 6. Everything was smooth until I decided to install some dark theme from the Themes app and the phone bricked.
I booted into recovery mode, wiped all data and rebooted.
As I reboot, it shows the MIUI 9 intro screen. Select language, then select region. AFTER I select region, the phone setup shows 'wait a second...' and then the error happens: a message 'Find Device has stopped' appears and it boots. Eternally.
So far I've tried:
1) Xiaomi PC Suite - says I should update my phone before using it.
2) Xiaomi Mi Flash - says I need to unlock bootloader
3) I asked to unlock bootloader, was authorized for my Mi account a few hours later, but when I use the Mi unlocker app, it says my My Account was not bound to the device (well it was but I wiped data...)
4) If I try an unnoficial flash tool, it says I need to enable USB debugging. I can't enable it anymore because the phone is stuck in the initial setup screen when it boots after Find Device stops.
Any suggestions please? I have no idea how to recover my phone.
Thanks!
Here is a method that worked for bricked Mi 5 devices.
I don't have time to look in your particular problem right now, but rest assured, as a last resort you can always boot into EDL mode and flash right away without unlocked BL. You need to open up your phone for that though.
mkioshi said:
Any suggestions please?
Click to expand...
Click to collapse
Alright, I might have worked out a solution, make sure to follow these steps:
Download Global Dev 8.1.25 ROM zip.
Download Xiaomi ADB, extract the 3 files and put them in a folder with the ROM zip.
Hold Vol + Power down and in the following menu select "Connect to Mi Assistant" or "连接小米助手".
Drag the ROM zip onto the XiaomiADB.exe, let it do its thing.
On successful flash the device will reboot. Enter recovery-mode again.
Via cmd, run xiaomiadb format-data.
Let me know if this works. If you have any questions, feel free to ask.
Good luck!
DavidRJ said:
Let me know if this works. If you have any questions, feel free to ask.
Good luck!
Click to expand...
Click to collapse
Damn, I thought this would work.
I tried to flash your dev rom, it said I can only flash Global ROMs.
So I tried 9.2.2.0,it said I could not flash this because it's older.
Then I tried the current ROM I had, the 9.3 (Oreo) and it flashed alright, I formatted data via adb like you said... But no way, I get the same MIUI welcome screen, choose language, choose region, and after I choose region (only China is listed) I get the same Find Device closed message and it reboots.
Maybe I'll be able to do this with a future MIUI release? Maybe it's a 9.3 OCAMIEK bug?
mkioshi said:
Maybe I'll be able to do this with a future MIUI release? Maybe it's a 9.3 OCAMIEK bug?
Click to expand...
Click to collapse
Unlucky. Try with some more zips to be sure. Make sure to try China Dev and Stable too.
If nothing would work and there's really no other way, are you confident enough to open up your phone? You'd just need to connect 2 points to enter EDL mode which should allow you to flash anything you want.
But for now you could also wait for a new release and see if that helps.
It happened to me exactly the same this weekend in a mix 2. After all the afternoon trying to fix it in this way.
Install a recovery through adb in fastboot mode, from adb restart the device by pressing the volume up button to enter the recovery directly. Once in recovery mode I made all the wipes and then I copied a custom rom to the internal memory of the phone and the flash in my case was epic rom. And the cell phone already works perfectly for me.
I write from a translator I'm sorry if you do not understand something, I hope it helps.
A greeting from Spain!
I just spent hours fixing the same issue. In the end the following method worked. Note that it requires an unlocked bootloader.
Sorry I can't post links yet so just have to refer to Google searching...
1. Download latest miFlash v2017.7.20.0 (Google search for it)
2. Go to "Fastboot Update - Xiaomi MIUI Official Forum" site (again just Google search)
3. Download "★ Xiaomi Mi 6 Latest Global Stable Version Fastboot File Download" from the website in step 2 (other ROMs probably work too)
4. Follow the above guide from the Fastboot section
Good luck!
Pc suite wont work on our mi6 because it only works until android 6 or so, so its not for us.
Id wait for the next global stable release and try that one out. BTW, have u tried flashing MIUI china versions? Maybe that one works out (althugh it said only global, maybe referring to developers and not china stable). GL!
I can't unlock the bootloader. Applied for it on MIUI, it authorized me but the unlocked app says the device is not bound to my MIUI account.
Although i have logged in and backup stuff from my Mi account in that phone, that unlock app says its not associated. Maybe because I wiped the data when it bootlooped, i don't know. Anyway unfortunately can't unlock it right now. Thanks!
Sent from my SM-N920G using Tapatalk
DavidRJ said:
Unlucky. Try with some more zips to be sure. Make sure to try China Dev and Stable too.
If nothing would work and there's really no other way, are you confident enough to open up your phone? You'd just need to connect 2 points to enter EDL mode which should allow you to flash anything you want.
But for now you could also wait for a new release and see if that helps.
Click to expand...
Click to collapse
Oh I'll try other Roms. You did help me a lot tho because i was finally able to at least flash something to my phone. That relieves me a ton, because at least i know it can be saved someday lol.
I'm using my Galaxy note 5 and traveling now but will definitely try other Roms like the Chinese one next week. Thanks again, friend.
Sent from my SM-N920G using Tapatalk
mkioshi said:
That relieves me a ton, because at least i know it can be saved someday lol.
I'm using my Galaxy note 5 and traveling now but will definitely try other Roms like the Chinese one next week.
Click to expand...
Click to collapse
Not too bad of a substitute phone.
Apart from trying other ROMs, the notable thing here is that you can kind of access ADB commands via that tool which might help you fix the issue with "Find Device" FC.
Anyways, if you have any more questions later, I'll gladly help.
David
DavidRJ said:
Not too bad of a substitute phone.
Apart from trying other ROMs, the notable thing here is that you can kind of access ADB commands via that tool which might help you fix the issue with "Find Device" FC.
Anyways, if you have any more questions later, I'll gladly help.
David
Click to expand...
Click to collapse
Thanks David. I'll take a look at all the options in the adb tool when i come back home Monday.
I love my note 5, the screen is gorgeous and the camera is better than the Mi 6 IMHO. Reason i bought the Mi 6 are the 128 tb of storage, the size (this note i too big for my small hands) and the Mi 6 is so much faster, besides having tremendous battery life. My note5 battery was always ****, and I have been using it for the last 2 years (go the Mi 6 like 2 months ago).
You've been extremely helpful, bud. Are you from Brazil too? (Asking because of the RJ in your Nick)
Sent from my SM-N920G using Tapatalk
DavidRJ said:
Unlucky. Try with some more zips to be sure. Make sure to try China Dev and Stable too.
If nothing would work and there's really no other way, are you confident enough to open up your phone? You'd just need to connect 2 points to enter EDL mode which should allow you to flash anything you want.
But for now you could also wait for a new release and see if that helps.
Click to expand...
Click to collapse
I managed to flash the last global dev via xiaomiadb. It all went smooth.
Obviously, after selecting language and region, I get the same Find Device closed unexpectedly and it reboots.
And now, when I try to use xiaomiadb to flash or format data, it says ERROR and the phone reboots, like he's "rejecting" any xiaomiadb command. SO cannot flash anything now.
I'm giving up on this horrible phone.
mkioshi said:
And now, when I try to use xiaomiadb to flash or format data, it says ERROR and the phone reboots, like he's "rejecting" any xiaomiadb command. SO cannot flash anything now.
I'm giving up on this horrible phone.
Click to expand...
Click to collapse
Sorry to hear that. I can't really say what's the issue here as your phone is definitely not hard bricked but I have never seen such behavior before.
Well depending on where you bought your phone, you could definitely file an RMA with the seller. You didn't unlock bootloader and your phone bricked itself basically. If you bought it in China, it depends on how easy it is to ship phones overseas in Brazil. In Europe, we can't easily ship phones with non-removable batteries sadly. (Sou da Alemanha btw mas falo um poucinho de Português )
In any case, your last bet would be the EDL method. You will lose your warranty though.
But I understand that this is way too much hassle for a soft brick caused by a damn theming engine... I'm so glad I switched off MIUI months ago.
Anyways good luck and let me know if you get any further.
David
DavidRJ said:
Sorry to hear that. I can't really say what's the issue here as your phone is definitely not hard bricked but I have never seen such behavior before.
Well depending on where you bought your phone, you could definitely file an RMA with the seller. You didn't unlock bootloader and your phone bricked itself basically. If you bought it in China, it depends on how easy it is to ship phones overseas in Brazil. In Europe, we can't easily ship phones with non-removable batteries sadly. (Sou da Alemanha btw mas falo um poucinho de Português )
In any case, your last bet would be the EDL method. You will lose your warranty though.
But I understand that this is way too much hassle for a soft brick caused by a damn theming engine... I'm so glad I switched off MIUI months ago.
Anyways good luck and let me know if you get any further.
David
Click to expand...
Click to collapse
You're a very nice person, David, thanks a ton!
Oh no xiaomi RMA here. And yeah I saw some people who bricked their phones by installing some dark theme (not the same as mine, but it was always a dark theme) after upgrading to the Oreo global rom.
And just my luck, my Note 5 took a dive yesterday so I'm phoneless lol. Thinking bout getting a Xiaomi A1 or a Moto X4, theyre not expensive and about the same price here...
If you can use adb commands. Try:
> fastboot erase system
> fastboot erase userdata
> fastboot erase boot
> fastboot erase cache
> fastboot erase data
Then try flashing the the latest developer rom as you did before.
mkioshi said:
And just my luck, my Note 5 took a dive yesterday so I'm phoneless lol.
Click to expand...
Click to collapse
Damn... Well you could still try the advice from @golfinry, I didn't think of regular ADB commands at all. Then again, if you can't do RMA anyways, what's stopping you from trying the EDL method? As far as I know you can flash any MIUI ROM you want without unlocked BL with that.
golfinry said:
If you can use adb commands. Try:
> fastboot erase system
> fastboot erase userdata
> fastboot erase boot
> fastboot erase cache
> fastboot erase data
Then try flashing the the latest developer rom as you did before.
Click to expand...
Click to collapse
Oh but I cannot use fastboot on locked bootloader right? Got the message after trying these commands
fastboot erase system
******** Did you mean to fastboot format this partition?
erasing 'system'...
FAILED (remote: Erase is not allowed in Lock State)
finished. total time: 0.003s
DavidRJ said:
Damn... Well you could still try the advice from @golfinry, I didn't think of regular ADB commands at all. Then again, if you can't do RMA anyways, what's stopping you from trying the EDL method? As far as I know you can flash any MIUI ROM you want without unlocked BL with that.
Click to expand...
Click to collapse
Seems to require unlocked BL. Anyway have you ever seem this error:closed message when trying to do adb commands like adb usb (or xiaomiadb usb), adb format-data, adb sideload, etc?
Started happening after I managed to flash latest global. SO I cannot try to flash anything now
Figured as much... What about the data partition. Same thing?
tldr; use the LeddaZ build
Downloads:
ROM
Lineage Recovery
Hello XDA,
I'm posting a build using the unified curtana build code that's on github. I have a joyeuse (9 Pro) so I can't really test it on the 9S (curtana). I've been testing it out for a couple of days and haven't had any bugs other than status bar centered items.
Bugs / not working / To do:
Wireguard support Added 18-Sept
Play Store certification (Workaround using MagiskHide Props Config)
64 MP camera module seems to work only with the ANX Camera ver 185(not included). You must manually add all permissions.
Status bar text around the front camera
Code:
Source Code: https://github.com/LineageOS
Device: https://github.com/xiaomi-sm6250-devs/android_device_xiaomi_curtana-unified
Kernel: https://github.com/xiaomi-sm6250-devs/android_kernel_xiaomi_sm6250
Vendor: https://gitlab.com/m0sin/proprietary_vendor_xiaomi_curtana
Play Store certification: Have you tried with the latest gapps yet?
How to install? Anything I need to look at?
dungphp said:
Play Store certification: Have you tried with the latest gapps yet?
Click to expand...
Click to collapse
I have, it might be Magisk or I'm not hiding it properly.
Edit: I used the Magisk HideProps module and everything works fine now. I think the naming, curtana vs joyeuse and version number were causing the issue.
glurak888 said:
How to install? Anything I need to look at?
Click to expand...
Click to collapse
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.
I have just installed it, anything I should know?
Installed successful on
Note pro 9 a Joyeuse (global) with 64mp cam , nfc and Lte aka a M2003J6B2G
Only recovery from lineage worked for me ... it also enables fastbootd !!
Rooting with magiskmanager wasnt possible via patching boot.img but flashing Magisk-v20.4.zip via recovery worked .
nfc works too
fastcharge seems so work fine ...
lte seems to work too
will try anx cam and 64 mpx tomorrow ... //edit - ANXCameraUnity_185.SaltyIntelligentPlainsqueaker and 48MPFixQ_170.SophisticatedFatBetafish make it work too ....
thx
I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.
[email protected] said:
I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.
Click to expand...
Click to collapse
Yes, install the 48 MP Fix to add the 48 MP camera. It's crashing because you need to manually fix the permissions on the app. After you allow everything it'll crash once then work fine.
Minor update:
September security patch
Added wireguard kernel support 1.0.20200908
moffa~ said:
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.
Click to expand...
Click to collapse
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?
didicola said:
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?
Click to expand...
Click to collapse
Not sure I understand what you are saying. The build is joyeuse/curtana unified. I don't like not being able to flash zips without sideloading so I'm using the PBRP recovery. For the initial flash I used my PC and the Lineage Recovery.
Are the gapps included or do we need to flash them?
kalehrl said:
Are the gapps included or do we need to flash them?
Click to expand...
Click to collapse
Not included. Must be flashed.
Excellent rom, I have used it since its publication, and so far no problem. The performance of the battery seems to me outstanding, and to this day, it is the only one in which an indispensable application for me (Sony Music) works without problem. I hope the excellent work continues, and it even became an official version. Thanks!
I use redmi note 9s, can i flash this rom?
vanmaitrangchu said:
I use redmi note 9s, can i flash this rom?
Click to expand...
Click to collapse
Theoretically yes. Please share your experience if you try it out.
moffa~ said:
Theoretically yes. Please share your experience if you try it out.
Click to expand...
Click to collapse
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!
vanmaitrangchu said:
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!
Click to expand...
Click to collapse
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?
moffa~ said:
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?
Click to expand...
Click to collapse
The problem occurs when turning on the speakerphone while calling. End of the call without turning off the speakerphone, the next call will easily lose sound. Ratio 1/5. Trying to turn on and off the speakerphone is very easy to reset the device.
Regarding the 2 sim issue: I mean there is no separate button for the 2 sims in the dial pad. Like the dial pad of the EU version, very convenient.
I need one hand mod, too hight with my hand. like picture.
Home - Sweet Home
Q. How to get back to EMUI 8?
Probable reasons from people who ask this question : I messed up something during installing custom rom / I want to install something and it needs me to be on stock EMUI 8 / I just want to get to EMUI 8 and I don't care even if humanity gets extinct.
Thanks to @Djiban for guiding me about frp unlock (Yeah, I don't even know about that. I'm a pro noob ).
Note : This isn't the actual process to get back to EMUI 8 but its kinda like a perfect workaround.PROCEDURE :
Download file from link.
Extract it.
Run update_eng.bat in HWOTA_BLN_Eng/HWOTA8_BLN/
After the cmd window opens, type "1" and press "enter".
Wait till the process of compression completes.
Do not continue, Close the Window.
You'll find a file named update.zip in HWOTA_BLN_Eng/HWOTA8_BLN/update/
Copy it to your device.
Flash it with TWRP.
Flash the frp unlock file from attachments (else, you'll be able to boot but you can't get past the setup wizard).
Reboot to recovery (Now you'll get to stock one as the update.zip also contains stock recovery).
Perform factory reset and clear cache.
Reboot.
:Cheers:
NOTE : Your boot animation will change (you'll get the Huawei's default boot animation. I like it ).
This is quite boring thread and you mostly will not need it as Huawei's phones are almost unbrickable(Thanks to Huawei for that). And yeah, Custom ROMs are much-much better.
Very useful thread. Do you think it can also be a workaround to install emui8 on devices with emui 5. Or it is just for device that ran emui8 8 once at least, before?
Djiban said:
Very useful thread. Do you think it can also be a workaround to install emui8 on devices with emui 5. Or it is just for device that ran emui8 8 once at least, before?
Click to expand...
Click to collapse
For both. But for devices on emui 5, continuing the process without stopping it in middle is recommended.
And thanks!
hey what twrp version should i use to flash since most of them don't mount internal storage (or just do it from sd card)
Haytham Tantoush said:
hey what twrp version should i use to flash since most of them don't mount internal storage (or just do it from sd card)
Click to expand...
Click to collapse
That is an encryption issue and can be fixed by flashing fstab.hi6250.zip
Venkata Lochan Nune said:
That is an encryption issue and can be fixed by flashing fstab.hi6250.zip
Click to expand...
Click to collapse
mind if i ask how?
i searched for the file and found one on darkjoker sourceforge named Huawei-Decrypt-Emui_8.zip
should i just flash it?
edit"
i figured it out thanks anyway man
Haytham Tantoush said:
mind if i ask how?
i searched for the file and found one on darkjoker sourceforge named Huawei-Decrypt-Emui_8.zip
should i just flash it?
edit"
i figured it out thanks anyway man
Click to expand...
Click to collapse
Great!
getting rollback check error tried the Munchy method of deleting the lines in the bat file but it is not working any help would be great
You could try this:
k40 bricked
Guys, I have redmi k40 while moving from chinese rom to global in mi flash tool I locked my bootloader and lost my android and now only fastboot mode. it givinng me Erading not allowed in lock state every time I try to flash any rom and when I...
forum.xda-developers.com
What do you mean it's not working ? What does it say?
Doesn't flash right off the start error anti rollback check failed
jefffrom said:
Doesn't flash right off the start error anti rollback check failed
Click to expand...
Click to collapse
You must've edited the wrong file. Try removing the Anti-Rollback Script from all scripts there.
And check that you use your desired script (clean / clean all lock / update) in Mi Flash, and whatever you use.
jefffrom said:
getting rollback check error tried the Munchy method of deleting the lines in the bat file but it is not working any help would be great
Click to expand...
Click to collapse
weirdly enough, this rollback problem doesnt occur because of 'rollback'
it occurs because of two reasons:
• long path name
• spaces in folder names
3zozHashim said:
weirdly enough, this rollback problem doesnt occur because of 'rollback'
it occurs because of two reasons:
• long path name
• spaces in folder names
Click to expand...
Click to collapse
For real !?
laid1995 said:
For real !?
Click to expand...
Click to collapse
yeah, i fastboot flashed with mi flash tool like a 100 times, im almost confident about that
3zozHashim said:
yeah, i fastboot flashed with mi flash tool like a 100 times, im almost confident about that
Click to expand...
Click to collapse
Going back and forth between different android versions (rollback) ?
laid1995 said:
Going back and forth between different android versions (rollback) ?
Click to expand...
Click to collapse
yeah
i went back and forth a couple of times between miui versions 12.5 and 13
i also went back and forth a couple of times between miui versions 13
i also went back and forth a couple of times between Mi, EEA & Indonesia
3zozHashim said:
yeah
i went back and forth a couple of times between miui versions 12.5 and 13
i also went back and forth a couple of times between miui versions 13
i also went back and forth a couple of times between Mi, EEA & Indonesia
Click to expand...
Click to collapse
That's awesome.
Thanks for the info. Buddy.
cyanGalaxy said:
You must've edited the wrong file. Try removing the Anti-Rollback Script from all scripts there.
And check that you use your desired script (clean / clean all lock / update) in Mi Flash, and whatever you use.
Click to expand...
Click to collapse
Odd I never had this problem with the 1306 never had to edit nothing but what the other guy said about the folder name being to long very well my be it, right now I'm in no desperate need to flash on previous version of Arrow and all is good, just want to have it ready for the next time I get. Board
3zozHashim said:
weirdly enough, this rollback problem doesnt occur because of 'rollback'
it occurs because of two reasons:
• long path name
• spaces in folder names
Click to expand...
Click to collapse
you are correct worked like a charm !