Hi, I'd like to start off by saying I'm new here, and have went over all the newbie threads as best as I can. I appreciate how welcoming this forum is, I never took that much of a deep look at it besides looking at threads in the past for multiple things. Still very new to all this stuff in general. Due to being stuck rn, I cannot provide a proper signature, apologies.
Couple Days Ago- Unlocked bootloader on my Oneplus 7 Pro using adb, flashed TWRP for the then current version for the 7 Pro Guacamole referenced from the post here, then sideloaded Lineage through TWRP. Started using the device and it seemed to have went well and like a pretty average install as far as I can tell.
Note- I'm not sure if I installed TWRP properly, as I was able to boot into TWRP through power button and volume up, but I remember also accidentally booting into the Lineage Recovery at some point after my phone was already rooted after the next step, but idk honestly. I note this bc I seen that there might be another step to permanently install twrp once inside after flashing, but not sure, apologies. My lack of knowledge feels inexcusable with how abundant it is here.
I rooted the device soon after with magisk, which I installed the zip (which was simply placed in main directory) through TWRP, then finished the install in the OS and that seemed to be good. Mention I didn't actually know that the device was rooted after the first time, dumb ik, but I did this maybe 3 times before realizing that the device was indeed already rooted and I did it extra times.
Today I got the notification for a Lineage OS update in the OS. Because I know it's coming, yeah, ik how stupid this was to not make backups beforehand as I already have a good bit on there I don't wish to lose, although I have MEGA for all my super important stuff like my password database, etc. Needless to say, I have learned my lesson. Nonetheless, I downloaded the update and pressed the install button. It said installed and would need a reboot, so I did. Then it got stuck in the boot animation for 1.5+ hours.
Force shutting it off and into fastboot, I could boot into the updated lineage recovery, but no TWRP. I have tried reflashing the previous version of the lineage recovery and it did not make a difference. I also tried flashing the next newest version of TWRP for the 7 Pro running guacamole, but then I couldn't get any further than the bootloader.
I ended up reflashing the up to date version of the lineage recovery and it sat doing nothing for a while, so it's off now. I presume that Nebrassy and other devs for TWRP are working on a version for the new update, but idk how long that takes, not complaining though. (mad respect for all who make lineage, twrp and all this possible) (not to mention I don't even know the root of the problem)
Any thoughts or help would be much appreciated, and feel free to ask questions. I would preferably not have to wipe it all and restart, so I'm looking for solutions, although I'm willing to accept this might be for nothing and take the L. Lastly sorry if I have done anything "wrong" in this thread, lmk if I can do anything better, I appreciate it.
Related
After tinkering with my Androids over the years, (Infuse, Captivate, G2, and now G3) I have finally decided to become a member of the forum that I primarily use as a source of information and links to downloads. I'd like to first say thank you to all those that have unknowingly help me over the years with my roots. Great place you've got here.
Now the fun part, after two days of ownership, I have experienced the first issue was not able to resolve on my own, what appears to be a hard brick. I downloaded Flashify after my initial root, installed TWRP Manager, ran the patch for writing to the SDcard, and installed TWRP Recovery from AutoRec. All appeared to go well and it said the instal was successful. I followed the instructions I found online that had great results for my particular model and version 5.0.1. Well, when I went to boot into recovery to make my initial backup, the phone shut down and would not come back up. No response at all. It wont power up by any method, tried letting the capacitors drain, still no go. After tinkering with it for a few hours (I've owned this phone for a total of 2 days now), I finally came to the conclusion that it would need JTAG and the original boot image flashed over the one that I mucked up.
Any ideas on where I made my mistake? I'm near 100% certain I downloaded the proper files for my phone model.
Also forgot to mention, I have not changed anything else on the phone. Only installed apps and root browsers I planned on using. So stock kernel, stock ROM, nothing until I started getting ready to make myself a save point, ironic really!
jamguitarist said:
After tinkering with my Androids over the years, (Infuse, Captivate, G2, and now G3) I have finally decided to become a member of the forum that I primarily use as a source of information and links to downloads. I'd like to first say thank you to all those that have unknowingly help me over the years with my roots. Great place you've got here.
Now the fun part, after two days of ownership, I have experienced the first issue was not able to resolve on my own, what appears to be a hard brick. I downloaded Flashify after my initial root, installed TWRP Manager, ran the patch for writing to the SDcard, and installed TWRP Recovery from AutoRec. All appeared to go well and it said the instal was successful. I followed the instructions I found online that had great results for my particular model and version 5.0.1. Well, when I went to boot into recovery to make my initial backup, the phone shut down and would not come back up. No response at all. It wont power up by any method, tried letting the capacitors drain, still no go. After tinkering with it for a few hours (I've owned this phone for a total of 2 days now), I finally came to the conclusion that it would need JTAG and the original boot image flashed over the one that I mucked up.
Any ideas on where I made my mistake? I'm near 100% certain I downloaded the proper files for my phone model.
Also forgot to mention, I have not changed anything else on the phone. Only installed apps and root browsers I planned on using. So stock kernel, stock ROM, nothing until I started getting ready to make myself a save point, ironic really!
Click to expand...
Click to collapse
Post the guide that you followed
You would have to kick your phone into Qualcomm USB Loader 9008 in order to fix it
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-all-variants/
So I've bricked my phone. And I can't make it work. Yesterday I finally had some time to thinker with the phone and decided to install Fulmics Rom 6.0. I had already downloaded it a while ago but first now had the time to install it. I made a post in the Fulmic's thread but with their new 6.5 fulmics just out, so my post got berried so quickly so I got no replies.
I started in TWRP with doing a backup, then a wipe and then started the install.
It seemed install was going fine, I even got the Fulmic's GUI midways and selected appropriate model, D855. I tried to keep things as vanilla as possible and chose to not uninstall anything and keep stock temperature throttle back.
But when the install completed I got one error: set_metadata_recursive: some changes failed
Phone wouldn't boot. I had however made a backup before I started and I was able to restore from backup from within TWRP.
Then phone booted and it seemed all was fine. But as I had my mind set on the Fulmics ROM I had one more go, just ti be sure I didn't mess up and chose something bad in the Fulmic install GUI. Also I did a wipe first, then I wiped the cache/dalvik as I once read that could make install easier. And result same as before. set_metadata_recursive: some changes failed.
Tried to reboot but I get flash screen with LG loge and powered by android on the bottom, and then when screen changes to only LG logo it gets stuck'd. No matter how long I wait, and I tried to wait for hours remembering wiping dalvik/cache makes boot take longer time. Stucked on the boot load. Notification light changes from green to blue. And the Lg logo is there.
Worst part is that now I can't even restore it to my backup from yesterday.
Here is my phone:
Lg G3 D855 16 GB 2 GB RAM
Android 6.0 stock LG update.
TWRP 3
Rooted
For now I would settle for a working phone. That is my main priority. Truth be told I got scared now and I don't know if I will take my chances putting a custom ROM onto the phone. After all my android 6 was working nicely, phone was rooted and adaway was working nicely. I guess I got greedy and wanted more
It would be very nice if people could take things very basic, like if I am to do certain things in TWRP don't assume I will understand unless you go into details. Been struggling for hours upon hours now and my mind is mush and concentration was lost a few hours ago. Yet I need to keep at it as I can't be without a working phone tomorrow. For instance in the TWRP under tab advanced > sideload what can I try there to make phone boot?
If I have left out any important for you to help pls just ask and I will reply as fast as possible. Any and all tips and pointers will be much obliged.
joppy said:
It would be very nice if people could take things very basic, like if I am to do certain things in TWRP don't assume I will understand unless you go into details. Been struggling for hours upon hours now and my mind is mush and concentration was lost a few hours ago. Yet I need to keep at it as I can't be without a working phone tomorrow. For instance in the TWRP under tab advanced > sideload what can I try there to make phone boot?
If I have left out any important for you to help pls just ask and I will reply as fast as possible. Any and all tips and pointers will be much obliged.
Click to expand...
Click to collapse
Downgrade to twrp 2.8 and flash again hope you are good too to go....
For me , if i have problem.
Replace sdcard , format data on twrp and flash .kdz (not after 30x.0426.kdz) , usually LGup can made download mode it self.
If can booting , make temporary root and get twrp.
Ok I had TWRP v2.8.7.0 laying around. I've used it before with success, so I know it works with my Lg G3.
But still not possible to boot.
I will try to read up on the .kdz as I never even heard of that before. Maybe if I am lucky that will save the day.
Hehe what do you know. TWRP v2.8.7.0 worked!
I dismissed it too fast, turned out it didn't get stuck'd on boot, boot just took a while because I had wiped everything.
Now I can see android is upgrading apps, and also when I think back to the first reboot with twrp v2.8 it was fulmics logo on the bottom part of the screen not android I guess my mind did not pay any attention as I was truly expecting to be stuck in boot loop this time too
Fingers crossed it is working now, I guess I didn't pay much attention when I tested twrp v2.8 and pointed to the fulmics ROM 6.0 and it seems it will work whoha
Finally I've got a working phone, and I also got Fulmics 6.0 as I sat out to get.
Don't know what went wrong or what caused the boot loop, but twrp v2.8 seemed to be the working solution.
IT seems everything works except I lost root. Which is fine for now, I will root another day.
Now I just need to use the dang phone
Deleted for your own safety
Btw, as the phone must be rooted to install custom ROM's it does seems strange that phone after installing Fulmics 6.0 appears to NOT have root, according to RootChecker. Could it be that the custom ROM is confusing RootChecker or did root somehow get revoked?
Is there a manual way I can check to see if phone is rooted? Cos there is, terminal
I took the chance tp get the latest KingRoot v4.9.6 over my previous v4.5.6. And run the APK.
Seems there must have been some issues with SuperSU, I had v2.54 and BETA v2.65. None of them kept root after install.
Found the latest stable that was superSU v2.78 and that fixed my issues.
TWRP ver 3.x messed my phone up too. Thought I had a good EFS backup, but when I needed to restore it, it didn't work. I will not be using ver 3.x again for a long time. Ended up losing my IMEI because of it.
Hello, I recently tried to root my device, I succeed in doing so but it was systemless root, I didn't know anything at the time so I tried different versions of supersu, now my phone won't boot, only fastboot and recovery works,
I visited a thread https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
but I don't know which one is my stock and I'm afraid to mess it up even more,
image uploaderG]
Can you please advise me how to recover my basic stock system :F
I remember that my installed android before it stopped working was 6.01 afaik
Your Stock is 6.12.111.4
option 1:
TWRP backup - https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
on post #3
Make sure to use TWRP 3.x.x.x not your current one as it seems you use the outdated version.
option 2 :
RUU - https://www.androidfilehost.com/?fid=24399965296001026
follow this guide but use the above RUU - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Thank you, my TWRP is the latest one now because my system sort of worked when I first rooted it but when I noticed that it's systemless I tried to flash system one and my phone didn't work as intended (couldn't download things on it and some other things didn't work) that's when I flashed newest twrp and newest super su and factory reset stopped working as of now and it's stuck on bootloop. Downloading that recovery, wish me luck .
Edit: it works now, thanks
One additional issue arose - my folders seem to be really wrecked, can't download anything from updates to system apps to downloading apps from playstore and even downloading apps regularly, when I made sd card my internal card I was able to download opera and wanted to select default download folder but couldn't pick any/make any and the folders were not recognizable for me (no data folder for example)
edit 2: I probably fuked up permissions too last time, fix context in twrp seems to have fixed the issue
Radenz said:
that's when I flashed newest twrp and newest super su and factory reset stopped working as of now and it's stuck on bootloop.
Click to expand...
Click to collapse
Couple words to the wise:
1) Always state exact versions numbers (TWRP, SuperSU, etc.) instead of just saying it the "latest". I've seen a lot of cases, where folks ensure us they are on the "latest" and it turns out when prompted for the actual version number, they are using something from 2 years ago!
In general when posting here, it's always best to give as much detail and specific info as possible. Vague descriptions, lack of details, and assumptions are always going to hinder more than help.
2) Always make a TWRP backup of your stock ROM before doing any mods like root or custom ROM. As you now see why, things don't always go as intended. Luckily, ckpv5 maintains a collection of stock backups. But you should already know how to revert to stock and be equipped to do so, before doing the mods. Not waiting for that "panic" moment when you need it, and can't figure it out.
I'm surprised how many folks here jump into rooting, flashing custom ROMs without leaving themselves an "escape plan" of knowing how to get back to stock. Maybe it's just my personality, but I can't fathom doing any of these things without knowing beforehand how to fix them, restore stock, etc.
Thanks for advice, to be honest 3 days ago I didn't know what rooting was and searched for "root htc one m8" and got it done by a site from 2014 with a multitool that had outdated soft. What I lacked then was big red uppercase notice how to do backup because most first time rootings end up badly.
Radenz said:
Thanks for advice, to be honest 3 days ago I didn't know what rooting was and searched for "root htc one m8" and got it done by a site from 2014 with a multitool that had outdated soft. What I lacked then was big red uppercase notice how to do backup because most first time rootings end up badly.
Click to expand...
Click to collapse
Yeah, completely understand if you are new to this; and we all had to start somewhere, at some time. Consider it lessons learned for next time.
A lot of folks skip the step of making a backup (before root, etc.). And also a lot of guides, YouTube tutorials, etc. neglect this step (which is something I cannot understand). So it's an honest mistake, and I'm definitely not saying that it's your fault that it wasn't done.
****** Would really appreciate some help here...
I've tried to install quick reboot (zips), magik, (zips) and busybox, on 3.4 0-0 twrp, and it won't work to boot to system, still says on this version it cannot mount the system. I don't have the perma-recovery file as I cannot find it online, and nexus root toolkit doesn't download it in the dispensaries, latest version.
Hope I haven't knacked it, i also have some screenshots but it doesn't matter as I cannot access the system itself, unless i am missing something it should just boot back to system, I don't understand what I am doing wrong, or have done wrong. Got the img and everything with it.
That said, the mount storage issue is the only thing red, or wrong in the flash, everything else worked apparently, said it installed without a hitch. Which was different that with the standard NRT downloaded twrp, with supersu, as that didn't work.
It just goes back to twrp constantly, can't boot. Help. Really wish I just waited for a response here first. Also I don't believe this is a bootloop, as it just goes back to twrp not bootloader or anything else, probably wrong.
I have been using this vid from the start: realizing that wasn't doing it, magik and a new bionic busybox zip eventually did the trick on 3.4 0-0 twrp, but it sitll won't boot to system. It is probably something obvious, I have been on this for hours today and yesterday, no luck.
only thing i can think of is something to do with: fastboot flash recovery twrp-3.2.1-0-fbe-4core-bullhead.img
basically i flashed the latest version, i dunno if it's supported by nexus 5x.
thanks. uh just please say it ain't bricked.
Anyone?!
edit:
hi all, after immense pain, stress and struggle to get the thing to mount, and trying everything suggested online, it eventually just like "soft-bricked" or whatever, like it was just perma-stuck on the google screen and wouldn't boot to system. i am guessing it's because after a mistake it wiped the system.
i have managed to flash it back to stock, everything is there, and/or redownloading. no way am i gonna bother again, like if it ain't broke don't fix it at this point that would be foolish thought it was perma broke. i'm gonna get a profressional to do it or something, or to give me one to one support to try it again. in the meantime i am going to learn more about rooting and the NRT and all the fundamentals of that.
if anyone here has advice about this still, or articles where I can read about it online, where to learn etc. I'd appreciate that as well, thanks.
Cam3333 said:
****** Would really appreciate some help here...
I've tried to install quick reboot (zips), magik, (zips) and busybox, on 3.4 0-0 twrp, and it won't work to boot to system, still says on this version it cannot mount the system. I don't have the perma-recovery file as I cannot find it online, and nexus root toolkit doesn't download it in the dispensaries, latest version.
Hope I haven't knacked it, i also have some screenshots but it doesn't matter as I cannot access the system itself, unless i am missing something it should just boot back to system, I don't understand what I am doing wrong, or have done wrong. Got the img and everything with it.
That said, the mount storage issue is the only thing red, or wrong in the flash, everything else worked apparently, said it installed without a hitch. Which was different that with the standard NRT downloaded twrp, with supersu, as that didn't work.
It just goes back to twrp constantly, can't boot. Help. Really wish I just waited for a response here first. Also I don't believe this is a bootloop, as it just goes back to twrp not bootloader or anything else, probably wrong.
I have been using this vid from the start: realizing that wasn't doing it, magik and a new bionic busybox zip eventually did the trick on 3.4 0-0 twrp, but it sitll won't boot to system. It is probably something obvious, I have been on this for hours today and yesterday, no luck.
only thing i can think of is something to do with: fastboot flash recovery twrp-3.2.1-0-fbe-4core-bullhead.img
basically i flashed the latest version, i dunno if it's supported by nexus 5x.
thanks. uh just please say it ain't bricked.
Click to expand...
Click to collapse
issues such as what youve experienced are usually caused by version mismatches. I dont have this device and am unfamiliar with the root process for it, but it shouldnt be too different from any other phone. what is the baseband version of your actual phone?
look at this specific reply in this thread
GUIDE - Fix bootloop with locked bootloader via ADB/Fastboot (Android M, N, O)
Hi, Here is fix for those, who have problem with bootloop on 5X with locked bootloader and OEM unlock disabled. This tutorial works for Beta Android O bootloop too. You will need: ADB + drivers installed...
forum.xda-developers.com
Okay, so I'm having a real b**** of a time getting root or even TWRP on my Moto G Fast (Boost mobile) and I really don't understand what it is I'm doing wrong. I've carefully gone through pretty much every thread available on XDA (and basically everywhere else) pertaining to getting root/TWRP on this device and from what I've gathered its been a pretty simple process for most other people with this device but for some reason nothing has worked for me. I should also note that my phone has had the most recent OTA update, which I was led to believe would make things easier but apparently not lol. So far the only thing that's gone off without a single hitch was unlocking the bootloader. Beyond that nothing I've tried has seen much success.
I was able to flash TWRP and get it to boot a couple times, but only from the fastbootd menu and even when I was able to boot TWRP and attempt flashing Magisk it failed every time (far to quickly for me to even read the red text in the log) and would immediately reboot TWRP, taking me back to the recovery lock screen. I'm also not used to having two different bootloaders on a phone so I'm still not quite sure which one I'm supposed to use for flashing (although fastbootd has so far been the only one I've achieved any success with) and the stock recovery has been a dead end at least 50% of the time I was able to get to it (I just get the dead Andy with the "no command" dialog and the hard buttons do nothing) So I eventually gave up flashing the Magisk zip and decided to try patching the boot.img instead. I used fastboot to flash the patched img to both the boot_a and boot_b partition, which seemed to work at first, until I realized I had no mobile signal and my touch screen was unresponsive. I just spent the last hour or so unbricking it with Lenovo's Rescue & Smart Assistant. I've read plenty of threads where these same exact issues happened to others but I've yet to find any kind of effective work-around or an explanation as to why its happening.
Even when I was able to get TWRP to boot it never seemed to survive a reboot. I'd have to flash it again every time in order to get into it. It's also been quite a while since I've rooted a phone so I'm still pretty new to treble enabled devices and their surplus of confusing partitions, a few of which I wasn't even able to mount/unmount in TWRP, which was a bug I thought was fixed a while ago, but to my knowledge I have the most recent version and I'm still getting these same bugs
Basically at this point I'm at a loss for ideas so any and all advice or suggestions would be much appreciated. I apologize if this post just sounds like a long winded complaint or I didn't provide enough info for anyone to work with (I'm running late for work and I'm mentally exhausted lol) but hopefully someone on here can provide me with some answers. I'll try to post more specific info and maybe some logs after work but until then godspeed.
AMShiech said:
Okay, so I'm having a real b**** of a time getting root or even TWRP on my Moto G Fast (Boost mobile) and I really don't understand what it is I'm doing wrong. I've carefully gone through pretty much every thread available on XDA (and basically everywhere else) pertaining to getting root/TWRP on this device and from what I've gathered its been a pretty simple process for most other people with this device but for some reason nothing has worked for me. I should also note that my phone has had the most recent OTA update, which I was led to believe would make things easier but apparently not lol. So far the only thing that's gone off without a single hitch was unlocking the bootloader. Beyond that nothing I've tried has seen much success.
I was able to flash TWRP and get it to boot a couple times, but only from the fastbootd menu and even when I was able to boot TWRP and attempt flashing Magisk it failed every time (far to quickly for me to even read the red text in the log) and would immediately reboot TWRP, taking me back to the recovery lock screen. I'm also not used to having two different bootloaders on a phone so I'm still not quite sure which one I'm supposed to use for flashing (although fastbootd has so far been the only one I've achieved any success with) and the stock recovery has been a dead end at least 50% of the time I was able to get to it (I just get the dead Andy with the "no command" dialog and the hard buttons do nothing) So I eventually gave up flashing the Magisk zip and decided to try patching the boot.img instead. I used fastboot to flash the patched img to both the boot_a and boot_b partition, which seemed to work at first, until I realized I had no mobile signal and my touch screen was unresponsive. I just spent the last hour or so unbricking it with Lenovo's Rescue & Smart Assistant. I've read plenty of threads where these same exact issues happened to others but I've yet to find any kind of effective work-around or an explanation as to why its happening.
Even when I was able to get TWRP to boot it never seemed to survive a reboot. I'd have to flash it again every time in order to get into it. It's also been quite a while since I've rooted a phone so I'm still pretty new to treble enabled devices and their surplus of confusing partitions, a few of which I wasn't even able to mount/unmount in TWRP, which was a bug I thought was fixed a while ago, but to my knowledge I have the most recent version and I'm still getting these same bugs
Basically at this point I'm at a loss for ideas so any and all advice or suggestions would be much appreciated. I apologize if this post just sounds like a long winded complaint or I didn't provide enough info for anyone to work with (I'm running late for work and I'm mentally exhausted lol) but hopefully someone on here can provide me with some answers. I'll try to post more specific info and maybe some logs after work but until then godspeed.
Click to expand...
Click to collapse
You saw my thread
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com
sd_shadow said:
You saw my thread
[Guide] Root Motorola with Magisk (UnLocked Bootloader)(Non-TWRP method)
Root Motorola Devices with Magisk Note: This method has been working with most Moto Devices that the Bootloader can be UnLocked. If the Bootloader cannot be Unlocked this method will not work. Please only use this as a reference. If you require...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah I tried following exactly that procedure and it bricked.
Dude. I have this phone. Same Carrier.
I know, it can be a pain in the ass. I've been on medical leave for 3 years though and needed a project to work on so I've been coming up with my own methodologies to fix this process...
Like, I've got a script that should de-brick your phone back to stock no matter what, and then we can move forward.
Are you on discord? This is going to be a bit too slow. I can just create us a channel or something though.
Lanlost said:
Dude. I have this phone. Same Carrier.
I know, it can be a pain in the ass. I've been on medical leave for 3 years though and needed a project to work on so I've been coming up with my own methodologies to fix this process...
Like, I've got a script that should de-brick your phone back to stock no matter what, and then we can move forward.
Are you on discord? This is going to be a bit too slow. I can just create us a channel or something though.
Click to expand...
Click to collapse
I appreciate the reply man, and sorry for the late response (I only get one day off a week), but I fortunately got it figured out finally. My main issue was that this is the first A/B treble enabled phone I've ever tinkered with, and most everything I read claimed I had to boot to fastbootd in order to flash twrp but that never seemed to work.
My computer would recognize the phone as a fastboot device while in fastbootd but that's about it. Everytime I tried to flash in fastbootd the output either claimed there was 'no such file' or it appeared to work, but when I tried booting to recovery I still got stock recovery. I was finally able to get TWRP to stick by just booting it initially from the normal bootloader and using TWRP to flash itself to the recovery partition.
Then I was able to install magisk in TWRP by formatting data and flashing v21 instead of the latest version (Everytime I tried flashing v22 from TWRP it failed). Then after booting system, going through setup, and installing magisk manager I found Id successfully achieved root and was able to update to magisk v22 via MM without bricking.
After all that trouble I'm a little nervous to try a custom ROM cuz stock with root is basically perfect so far. Now the only thing I'm struggling with is figuring out how to set selinux to permissive so I can install BusyBox to xbin.