I got the tablet into EDL mode via adb command, and i used Qfile with emmc 8974 but i keep getting an error . anyone else had success with making a backup of their firmware ?
Related
Hello,
I have my LG G3 D855 bricked. When i power it on, I get the LG logo for about 7 min, and then it enters to fastboot mode. Download mode doesn't work. As soon as I plug the USB I get the following message:
EP1/out FAIL nfo=40 pg0=f855200
usb_read() transaction failed
fastboot: oops!
fastboot: processing commands
Whenever I try to erase or write in the partition, I get the following message:
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
Can someone help me??
Sorry to say but your G3 is fully bricked
solution for no download mode, fastboot mode, qhsusb bulk mode , security error.
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
hello all
i brick my lg f460k while downgrading. ist it was in fast boot mode i searched alot on google how to fix fastboot. i found 1 thread to flash laf.img of f460k. i did it and now i hard brick my phone. diaspointed alot. now lg logo comeswith msg along secure boot error. in pc device manager showing qhsusb delod 9008 mode. any help from worthy developers
Hi all
It all happens after the screen was suddenly froze and having to take the battery out.
When turned on, the phone had a red/blue led problem.
It was first solved using the LGFlashTool V1.8.6.527 to flash in the LGF400LAT-00-V10a-LGU-KR-MAY-18-2014-0 tot. The phone was reverted to the original firmware and was functional.
Then I wished to upgrade to the latest stock fw (F400L30c_00_1217) using LG Tool 2014. Unfortunately this buggy program prompted connection to server failed and the text was messed up with ????? in the pop up LGUserCSTool window. It was force closed by the system so the whole process could not be completed. I pulled out the battery again(which I now think that I shouldn't do) and after restarting the download mode was ruined.
I tried to fix it using the short pin method here and if rescued would re-flash the tot using the LGFlashTool.
The problem is LGFlashTool did not allow me to do it this time with Model Information Check Fail just like others in this forum https://forum.xda-developers.com/lg-g3/help/model-information-check-fail-t3163715
Having received the message "Model Information" fail, I thought it was due to the firmware version mismatch so I decided to give the LG Tool 2014 a try, again.
I was learnt to ignore the connection fail message to let it run in the background.
However, this time it ended up at around 65% and now the download mode has gone.
Each time the power+vol up combination ends up being detected as qhsusb_bulk, a.k.a Qualcomm HS-USB QDLoader 9008
Not sure if the pins were physically damage during the shorting.
I have a thought. Is there any tool to convert kdz -> tot?
I know there is one to extract the bin, dz from kdz but I need tot to use in the boarddiag (as I think maybe the v30c firmware information has written into the phone by LG tool causing the LGFlashTool V1.8.6.527 to reject writing in)
What is the boarddiag for? Is it performing the same as adb/fastboot to erase/flash partition?
Or are there any workouts?
Thanks for reading and helping me.
it's so weird...yesterday it was stuck at qhsusb_bulk mode
so after placing for a day, it was detected as ABD interface today
and it was booted into fastboot mode.
I managed to erase partition but not flash..tried fastboot boot twrp.img
it restarted with a black screen and this time was detected as lge AndroidNet USB Serial Port
have tried the lg flashtool but no luck
Followed by that, I had applied the short pin method to restore the partitions again..
afterwards, i could manage to get in qhsusb_bulk only...
lets see if it could be in ABD interface tomorrow
btw, any ways to fix the download mode by the fastboot method given the bootloader was locked?
I was finally able to reflash using the tot file
but after flashing the phone reboots into black screen with flashing blue/red led just like previously(bricked status)
the phone was unable to connect as LGE AndroidNet USB Serial Port too
therefore, the flash tool could not complete
any idea for a fix?
my lg g3 f400s bricked
funhk said:
Hi all
It all happens after the screen was suddenly froze and having to take the battery out.
When turned on, the phone had a red/blue led problem.
It was first solved using the LGFlashTool V1.8.6.527 to flash in the LGF400LAT-00-V10a-LGU-KR-MAY-18-2014-0 tot. The phone was reverted to the original firmware and was functional.
Then I wished to upgrade to the latest stock fw (F400L30c_00_1217) using LG Tool 2014. Unfortunately this buggy program prompted connection to server failed and the text was messed up with ????? in the pop up LGUserCSTool window. It was force closed by the system so the whole process could not be completed. I pulled out the battery again(which I now think that I shouldn't do) and after restarting the download mode was ruined.
I tried to fix it using the short pin method here and if rescued would re-flash the tot using the LGFlashTool.
The problem is LGFlashTool did not allow me to do it this time with Model Information Check Fail just like others in this forum https://forum.xda-developers.com/lg-g3/help/model-information-check-fail-t3163715
Having received the message "Model Information" fail, I thought it was due to the firmware version mismatch so I decided to give the LG Tool 2014 a try, again.
I was learnt to ignore the connection fail message to let it run in the background.
However, this time it ended up at around 65% and now the download mode has gone.
Each time the power+vol up combination ends up being detected as qhsusb_bulk, a.k.a Qualcomm HS-USB QDLoader 9008
Not sure if the pins were physically damage during the shorting.
I have a thought. Is there any tool to convert kdz -> tot?
I know there is one to extract the bin, dz from kdz but I need tot to use in the boarddiag (as I think maybe the v30c firmware information has written into the phone by LG tool causing the LGFlashTool V1.8.6.527 to reject writing in)
What is the boarddiag for? Is it performing the same as adb/fastboot to erase/flash partition?
Or are there any workouts?
Thanks for reading and helping me.
Click to expand...
Click to collapse
you need to heat your processor to open download mode
Hi guys, I have a LG G3 (D858) that recently died and can only boot into Download Mode. I never root or modified any of my phone's hardware.
I have been using a Win10 (x64) computer, not sure if this would make any difference.
I have read numerous articles about un-bricking the device but I keep on getting stuck with LG FlashTool (v1.8.1.1023).
I have gone through the BoardDiag process, pass for both AP and EMMC. When I get to the LG FlashTool, I select the right tot and the LGUP8974.dll (the one available here on this forum), then the process will start for a few seconds and return with the "Download FAIL!!" message.
The 'log' below the red warning message says :
PID: NULL
IMEI: NULL
CrossDL [] to [D858HK]. SWversion[]
00000064
I would appreciate if any of you could help me out, thank you !
You have exact problem like me and even the device model. Try using LG flash tool 2014. I stuck several times using this tool yet i continue flashing using different kdz. Now it stuck with bootloop and i don't know what else to do. Only have download mode. Who know maybe you have luck unbrick your device
Hey everyone
My LG G4 (H815) suddenly turned off when i was using it, and it showed no life when i tried to boot it up again. Its completely stock, no custom recovery or custom firmware is installed. I cant boot into fastboot or EDL mode. I tried the button combinations as well as the test point method but i just cant get it to enter any kind of recovery mode, the screen just remains black (no backlight either). I installed the Qualcomm HS-USB drivers and when i plug my phone in my pc it gets recognized by QFIL. I tried flashing the fimware but it always gives me the Sahara unable to read packet header error. Can anyone help me?
Thanks in advance.
Have you searched the forum and tried any of these ?
https://forum.xda-developers.com/t/guide-proper-h815-unbrick-through-qfil-files-included.3709212/
https://forum.xda-developers.com/t/...-unbrick-via-external-sdcard-no-qfil.3748946/
https://forum.xda-developers.com/t/lg-g4-h818p-h815-hard-brick-recovered-working.3703565/
https://forum.xda-developers.com/t/unbrick-lg-g4-9008-qualcomm-mbn-files.3574595/