Develop Bugs

Emui 10

Emui 10 beta in Germany

Odd, I read a few days ago that the initial beta would only be open in China, with other regions following at a later date.
I can't even install the Friendly User Test client here. Keeps complaining about needing the latest Huawei Mobile Service application, but there is no update available for it when I check on Google Play. Maybe the Canadian model lacks that particular service.

Same here in Malaysia

Nothing here in Bulgaria still ... I check frequently . I even tried to change regions but with no luck .

I've installed the beta app but not sure I want to update, the list of bugs include some features I want to work, like front camera night mode
Maybe will have been fixed by the time it's offered here, videos I've watched show the UI and features looking pretty much the same as 9 too, although that was a couple month old video

Nothing here in Slovenia

Beta is up

Nice. How long did you have to wait to subscribe? I just sent the request to join the project. I'm in France, C431E4R2P2

I am confused . In that huawei page they said that Bulgaria wont be included for the beta emui but they specify that ELE-L29 9.1.0.193(C431E4R2P2) that will get . I am in Bulgaria and I have the exact same model . So when we will get it ? Every other eu country got it but not mine . I am checking everyday 2-3 times and I will be mad if we dont get it ... My model number is the same with same 193 software update .

Revengebg said:
I am confused . In that huawei page they said that Bulgaria wont be included for the beta emui but they specify that ELE-L29 9.1.0.193(C431E4R2P2) that will get . I am in Bulgaria and I have the exact same model . So when we will get it ? Every other eu country got it but not mine . I am checking everyday 2-3 times and I will be mad if we dont get it ... My model number is the same with same 193 software update .
Click to expand...
Click to collapse
Have you registered in the beta app yet?

Andrew49378 said:
Have you registered in the beta app yet?
Click to expand...
Click to collapse
It doesn't even show up as a project ...

Hey @All,
I've got accepted 2 days ago into the Beta (Germany)
How long does it take usually to push the OTA Update onto your system? I only get bloated with notifications of the annoying carrier updates which I won't install for obv. reasons.
Thank yall ♥

Vanchanh2 said:
Hey @All,
I've got accepted 2 days ago into the Beta (Germany)
How long does it take usually to push the OTA Update onto your system? I only get bloated with notifications of the annoying carrier updates which I won't install for obv. reasons.
Thank yall ♥
Click to expand...
Click to collapse
You probably need the latest carrier update before it will be offered

*Detection* said:
You probably need the latest carrier update before it will be offered
Click to expand...
Click to collapse
Are you sure about that? In first place I wasn't able to join the beta at all, since it told me you cannot join if you're running a carrier version of Android. Thus I had to hard reset my phone. :/

Vanchanh2 said:
Are you sure about that? In first place I wasn't able to join the beta at all, since it told me you cannot join if you're running a carrier version of Android. Thus I had to hard reset my phone. :/
Click to expand...
Click to collapse
Read here the requirements
https://consumer.huawei.com/en/community/details/%5bEMUI%2010%20Beta%20Opens%5d%20Get%20Ahead%20of%20the%20Line!/topicId_26877/showBread_1/fbclid_IwAR0mNOs1vh1_XJrCd2YKugkYXN67TyXegPHW9w5L14iCr-eUZwRTkXLXY-I/
.193 is the required firmware and also the latest available carrier
You should not be getting update notifications for carrier firmware if you flashed unbranded/global or whatever the non carrier is called on Huawei, and a reset alone won't remove carrier firmware

What you don't get is that for some carriers, when you put sim on the phone, it downloads a software update which installs over the original firmware. It works as a layer.
When you reset your phone without putting the sim on, you get the original firmware without this carrier layer. That's how I could join the project. Then I put the sim on again because you can't join the project without a sim on the phone.

jayreen said:
What you don't get is that for some carriers, when you put sim on the phone, it downloads a software update which installs over the original firmware. It works as a layer.
When you reset your phone without putting the sim on, you get the original firmware without this carrier layer. That's how I could join the project. Then I put the sim on again because you can't join the project without a sim on the phone.
Click to expand...
Click to collapse
Ah ok, I've been with Samsung for years so not used to Huawei methods yet

Anyone getting constant crashes with Nova Launcher on Android 10 that revert back to stock launcher? This happens to me Everytime I press the home navigation button when in I'm in home screen.

jayreen said:
What you don't get is that for some carriers, when you put sim on the phone, it downloads a software update which installs over the original firmware. It works as a layer.
When you reset your phone without putting the sim on, you get the original firmware without this carrier layer. That's how I could join the project. Then I put the sim on again because you can't join the project without a sim on the phone.
Click to expand...
Click to collapse
I think you are not right . Does't matter . The phones are unlocked . For example my phone is c431 model and it's listed in the huawei topic that we will get beta but nothing for now . Carriers dont install anything on your phone . Its not branded !

See above :
There is the usual firmware, plus a software layer installed by... The carrier. It's downloading itself right away when i put my sim on.
I never said it would lock the phone. But with this carrier software, you can not join the project (it claims the firmware is not compatible). I had to reset my phone to delete this carrier software, then put my sim and join the project before installing the carrier software.

Update: LG V500N U carrier Android 10 beta OTA

Grab it while you can!!! Here it is:
https://drive.google.com/drive/folders/1z8tLelF332kVfnE3Gi6zNH8oWCjeUE63
:good::highfive:
Waiting for crossflashing maybe this month we will have it. :highfive:
Do not try to crossflash! It will brick! First we must have working crossflashing between carriers, then crossflash to U carrier firmware , then flash this OTA.

Có ai thử chưa nhỉ?
Did anyone try?

I tried to fota flash this but i'm on v500n11o not v500n11n so it failed

okbakaka said:
I tried to fota flash this but i'm on v500n11o not v500n11n so it failed
Click to expand...
Click to collapse
I think we need next version with security patch newer than September than it should work.

kakarotvn said:
I think we need next version with security patch newer than September than it should work.
Click to expand...
Click to collapse
I did the downgrade to august patch and flashed ota .
Its too laggy very slow witg many bugs

It seems that LG is pushing the 10 beta to all koreans vi aota update.
To be able to receive it you must sign in in Quick Help app.
Unfortunately we have 2 problems:
1. Korean menu
2. We need a Korean lg account. I've tried creating one, also Facebook login, but it signs out me. Unfortunately I don't have the time to test with VPN. Also after successfully login we still need to go through the menu in korean language and sign in for the beta.
Maybe someone from Korea would help us. Maybe he can directly saveand give us the OTA. It will be downloaded on the main storage in a hidden folder.
Please help us if you live in Korea either with an account and menu step by step to subscribe to beta, or with the OTA saved as zip. Thx.

Inerent said:
It seems that LG is pushing the 10 beta to all koreans vi aota update.
To be able to receive it you must sign in in Quick Help app.
Unfortunately we have 2 problems:
1. Korean menu
2. We need a Korean lg account. I've tried creating one, also Facebook login, but it signs out me. Unfortunately I don't have the time to test with VPN. Also after successfully login we still need to go through the menu in korean language and sign in for the beta.
Maybe someone from Korea would help us. Maybe he can directly saveand give us the OTA. It will be downloaded on the main storage in a hidden folder.
Please help us if you live in Korea either with an account and menu step by step to subscribe to beta, or with the OTA saved as zip. Thx.
Click to expand...
Click to collapse
I was able to sign up for an LG account using a Google account so I am able to navigate the Quick Help app. But since I don't know Korean, I have been taking screenshots and using Google Translate to try to navigate. It's painful and slow and I have yet to find anything. I wonder if the OTA simply gets pushed over time after you sign up in the Quick Help app. I've tried using a VPN to South Korea and checking for an update manually in the system settings but nothing has popped up. I may try to find some one locally that speaks Korean to help me out, unless some one already knows what to do in the Quick Help app?

thegendler said:
I was able to sign up for an LG account using a Google account so I am able to navigate the Quick Help app. But since I don't know Korean, I have been taking screenshots and using Google Translate to try to navigate. It's painful and slow and I have yet to find anything. I wonder if the OTA simply gets pushed over time after you sign up in the Quick Help app. I've tried using a VPN to South Korea and checking for an update manually in the system settings but nothing has popped up. I may try to find some one locally that speaks Korean to help me out, unless some one already knows what to do in the Quick Help app?
Click to expand...
Click to collapse
If we are spekaing about what was sharef previously on the net the v18a beta is so slow buggy very laggy i tried it with fota from the august security patch and it was a painful expérience

It seems that there is a v19a android 10 beta for skt and kt carriers. Hope someone leaks it to give it a shot.

Inerent said:
It seems that there is a v19a android 10 beta for skt and kt carriers. Hope someone leaks it to give it a shot.
Click to expand...
Click to collapse
Looked for it on the net but without success.
Just a youtube video.showing the update which seems smoother than the 18a and improved one but Ithout links to download if you got it just inform us

Good news and bad news.
Good news is that I've managed to register on Quick Help app with an account from Korea.
Bad news is that I didn't find the beta enrollment join program. It's not available yet. Daaaamn.

I've spent like 2 hours translating screenshots with Google Lens...

This is 19a for the 3 Korean variants
https://forum.xda-developers.com/v50-thinq/development/fota-v50-korean-android-10-beta-19a-t3995611
Definitely works for kt variant as that is what I have now upgraded.

derekcranson said:
This is 19a for the 3 Korean variants
https://forum.xda-developers.com/v50-thinq/development/fota-v50-korean-android-10-beta-19a-t3995611
Definitely works for kt variant as that is what I have now upgraded.
Click to expand...
Click to collapse
Thx. I also have it. Does call recording work for you? For me it worked, but I somehow messed up debloating and it doesn't work now. Can you confirm is working for you?

Inerent said:
Thx. I also have it. Does call recording work for you? For me it worked, but I somehow messed up debloating and it doesn't work now. Can you confirm is working for you?
Click to expand...
Click to collapse
Yes call recording does work but very quietly.

Hello all - I own the V50 Korean version (V500N) -- which rom should I flash, KT, SKT, or LGU? Also, what version of the current software should I be at prior to flashing? Thanks

tveith said:
Hello all - I own the V50 Korean version (V500N) -- which rom should I flash, KT, SKT, or LGU? Also, what version of the current software should I be at prior to flashing? Thanks
Click to expand...
Click to collapse
Hello. It depends on what carrier your V50 will be. You should flash the carrier's one. For KT and U carriers you must be on v11o - September patch
For SKT carrier it will be v11q. But Kan, who has SKT, is having problems in installing it. Just be sure you don't upgrade to October patch by mistake.
LG-UP 1.16 does not support crossflashing, even korean carrier.

Inerent said:
Hello. It depends on what carrier your V50 will be. You should flash the carrier's one. For KT and U carriers you must be on v11o - September patch
For SKT carrier it will be v11q. But Kan, who has SKT, is having problems in installing it. Just be sure you don't upgrade to October patch by mistake.
LG-UP 1.16 does not support crossflashing, even korean carrier.
Click to expand...
Click to collapse
I'll be using the phone in Canada with Telus.

tveith said:
I'll be using the phone in Canada with Telus.
Click to expand...
Click to collapse
I meant the firmware of the V50, from what korean carrier it is.

can someone help ME

I have a note10+ t-mobile carrier. I bought it in china and still living here. It works fine, but on android 9, one UI 1.5 SM-N975U, the phone keeps asking me for an update which I did once and blocked my sim card after, so I had to return it. They back for me android 9 . my question is if I want to flash my phone to another carrier, it should also be t-mobile or USA, and can I do it with an open carrier, which I can use with any sim card?
and before flashing, what the most important things, I have to be careful when it comes to firmware or the phone model?
if someone can share with me the link of firmware I can use with the newest android I can install that would be awesome
my CSC is: N975USQS2ASJ8
service provider SW ver
SAMOC_SM-N975U_OYN_TMB_PP_0008
TMB/TMB/XAA

Question How is everyone updating the firmware? used japanese simcard?

p.s. I actually have the Leitz Phone 1 (Softbank) but I imagine it would be the exact same way with the Aquos R6

yellowchilli said:
p.s. I actually have the Leitz Phone 1 (Softbank) but I imagine it would be the exact same way with the Aquos R6
Click to expand...
Click to collapse
I have r6 docomo and I can find updates using Japan VPN.
It's really hard to update Softbank devices. I have zero 2 and r5g and this is a headache.
You can:
1) Buy Japan SIM - people say it is the most reliable choice
2) You can use Japan VPN . It might works but not always because of Softbank
3) You can hard reset your device and don't add any Google accounts, don't use gps, SIM cards. Add only WIFI and Japan VPN to find a new firmware. When device finds it and starts downloading you can disable your VPN connection to download with normal speed. You should do these steps with each update.
To know about new firmware use Softbank site. They post when the firmware is ready.
Be careful because I updated docomo r6 yesterday and now camera app opens with max brightness, I can't disable this thing.

Dunatiry said:
I have r6 docomo and I can find updates using Japan VPN.
It's really hard to update Softbank devices. I have zero 2 and r5g and this is a headache.
You can:
1) Buy Japan SIM - people say it is the most reliable choice
2) You can use Japan VPN . It might works but not always because of Softbank
3) You can hard reset your device and don't add any Google accounts, don't use gps, SIM cards. Add only WIFI and Japan VPN to find a new firmware. When device finds it and starts downloading you can disable your VPN connection to download with normal speed. You should do these steps with each update.
To know about new firmware use Softbank site. They post when the firmware is ready.
Be careful because I updated docomo r6 yesterday and now camera app opens with max brightness, I can't disable this thing.
Click to expand...
Click to collapse
thank you
looks like I'll need to get hold of a jp sim
because VPN didn't work for me
couldn't locate the Leica's firmware update page on Softbank but I'm sure if the R6 has an update then perhaps Leica should follow...
At this time I'm willing to accept max brightness bug if they are bringing optimisations elsewhere.. it's got a pretty heavy battery drain going on with first party homescreen for example

yellowchilli said:
thank you
looks like I'll need to get hold of a jp sim
because VPN didn't work for me
couldn't locate the Leica's firmware update page on Softbank but I'm sure if the R6 has an update then perhaps Leica should follow...
At this time I'm willing to accept max brightness bug if they are bringing optimisations elsewhere.. it's got a pretty heavy battery drain going on with first party homescreen for example
Click to expand...
Click to collapse
You can try this:
Turn off Google sync (everywhere), gps and pull out SIM. Restart device and turn on wifi and JP VPN.
It might works

Dunatiry said:
You can try this:
Turn off Google sync (everywhere), gps and pull out SIM. Restart device and turn on wifi and JP VPN.
It might works
Click to expand...
Click to collapse
sadly this didn't work for me

I used proton vpn - japan is free and just did update for the Aquos

@vpoppo
Hi,
How did you set up the VPN? I have a Sharp R6 Soon.
I have no Japan Sim.

yellowchilli said:
sadly this didn't work for me
Click to expand...
Click to collapse
Any news about your situation?
vpoppo said:
I used proton vpn - japan is free and just did update for the Aquos
Click to expand...
Click to collapse

Bluiquid said:
Any news about your situation?
Click to expand...
Click to collapse
Keep in mind...I think I read there was a cyclone there which cut there signal so probably their servers but again it worked on the nttDocomo R6 just using Proton VPN which Japan is free on.

vpoppo said:
Keep in mind...I think I read there was a cyclone there which cut there signal so probably their servers but again it worked on the nttDocomo R6 just using Proton VPN which Japan is free on.
Click to expand...
Click to collapse
Okay, thanks for the answer.
Did you unlock the Phone also? Like sim-unlock.
My R6 comes locked but with sim code seller says. I guess I need VPN for that to?

Bluiquid said:
Any news about your situation?
Click to expand...
Click to collapse
no.. for one I don't know for sure there is a new firmware (couldn't find the page on Softbank's website)
I'm just going to buy a japanese sim when I can. apparently even a used / deactivated one is good enough.

There's a new firmware release on oct 13, anyone able to update it? (using which method)

kwanying said:
There's a new firmware release on oct 13, anyone able to update it? (using which method)
Click to expand...
Click to collapse
curious where you get your firmware news from

yellowchilli said:
curious where you get your firmware news from
Click to expand...
Click to collapse
ソフトウェアサポート | スマートフォン・携帯電話 | ソフトバンク
ソフトバンクの公式ホームページです。スマートフォン・携帯電話の「ソフトウェアサポート」をご紹介します。
www.softbank.jp
AQUOS R6ソフトウェア更新｜サポート｜AQUOS：シャープ
AQUOS R6ソフトウェア更新に関する情報を掲載。
k-tai.sharp.co.jp

for anyone who already updated their phone, how is the improvement going ? is the camera quality got better ?
it's a shame that this phone has such promising hardware, yet weak software optimisation

If you have Softbank device you have to
1) factory reset
2) do not plug in your SIM
3) do not add Google account, only wifi settings
4) do not change region/time settings
5) turn on any VPN app, choose Japan
6) done. You will find an update
Every new update you can find only this way or you can buy Softbank sim
So, if you have Docomo device you have to:
1) just use any VPN app
Maybe: without SIM and with Japan region in settings.

H
vpoppo said:
I used proton vpn - japan is free and just did update for the Aquos
Click to expand...
Click to collapse
Hi, can you provide the more details procedure to update the phone ?
Did you just go to Setting - System - System Update to update ? Or is there any other procedure needed ?
I already use proton, but system update said my system is up to date (which not the case) , am still on 1.0.0.6 an the latest from docomo i believe is 1.0.0.8

Nevermind, got it. I need to reset my phone, and don't change the region at all from beginning. I choose japan language as well for precaution, and now it updating

Yesterday we have a new firmware update for R6 and Leitz. I'm using the Docomo variant. Additional

Did yo
xachiel said:
Yesterday we have a new firmware update for R6 and Leitz. I'm using the Docomo variant. Addition manage to
xachiel said:
Yesterday we have a new firmware update for R6 and Leitz. I'm using the Docomo variant. AdditionalView attachment 5471951
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Did you manage to update using VPN ? i was able to update previously, but somehow for this 1.0.11 version it wont appear even after using VPN.
What VPN do you use ? And what is the other procedure ? Thx !

Question Imported CN version OP11 and I can't update to A07, am I screwed?

Hey guys,
Let me start by saying I'm a total noob around this whole scene. I've tried to do what research I can to try and understand how to go forward, but I could use some of your expert advice.
I imported a CN version of the OnePlus 11 (PHB110). The device has been flashed to what I believe is an NA ROM of Oxygen os 13? It says my model number is CPH2451 in settings. I am currently on version CPH2451_11_A.06.
The problem is I cannot update the phone to A07 in the settings menu. It basically shows there is an update, and then says an error (image attached). I've tried resetting the update, restarting the phone and nothing appears to help.
I've also tried to go through Oxygen updater and using the incremental build with local update, and this also doesn't work.
I read somewhere that I have to wait for the full NA OTA A.07 to be released? Is this correct, and is there any guarantee I will be able to update?
Basically I want to know if I should try and return the device or not.
Really appreciate your thoughts into this.
Cheers guys.

You have root ?
When yes flash the stock init_boot.img
after that the update should work
And the usa have only very rarely times a full firmware pack

ChrisFeiveel84 said:
You have root ?
When yes flash the stock init_boot.img
after that the update should work
Click to expand...
Click to collapse
Nah I don't have root. I've also never rooted or flashed before...
If I have to do so to make it work, then I guess I'll have to learn. Thanks mate.

Tray Oxigen updater APK
Set the Oxigen Updater to full OS

[email protected] said:
Tray Oxigen updater APK
Set the Oxigen Updater to full OS
Click to expand...
Click to collapse
full only for EU and india USA have no full pack

ChrisFeiveel84 said:
full only for EU and india USA have no full pack
Click to expand...
Click to collapse
Ok
The problem is curious.
I bought one of the first Chinese ONEPLUS 11s with OS Color. It had the Chinese block of use.
I tried everything to remove it and I didn't succeed.
I sent the phone back and I'm still fighting for the return of the money paid.
Meanwhile, I bought an OP 11 CPH2451 dual SIM. he did the update to 07 without problems.
I bought the phone in the USA on Amazon.
The problem could be from your Chinese seller who repaired/modified a blocked Chinese phone and the intervention is not happy. Let's hope it's not like that.
First of all, check the Update settings.
If they are correct, you should resume uploading.
The second solution is to try the settings for Developer Activate. The third solution is to do a full reset, activate the developer and try again.

[email protected] said:
Tray Oxigen updater APK
Set the Oxigen Updater to full
Click to expand...
Click to collapse
Yeah I've tried this. It says that I am upto date on the stable brand, but there is an update when I swap to incremental.

[email protected] said:
Ok
The problem is curious.
I bought one of the first Chinese ONEPLUS 11s with OS Color. It had the Chinese block of use.
I tried everything to remove it and I didn't succeed.
I sent the phone back and I'm still fighting for the return of the money paid.
Meanwhile, I bought an OP 11 CPH2451 dual SIM. he did the update to 07 without problems.
I bought the phone in the USA on Amazon.
The problem could be from your Chinese seller who repaired/modified a blocked Chinese phone and the intervention is not happy. Let's hope it's not like that.
First of all, check the Update settings.
If they are correct, you should resume uploading.
The second solution is to try the settings for Developer Activate. The third solution is to do a full reset, activate the developer and try again.
Click to expand...
Click to collapse
Thanks for the reply. Sorry you are still waiting for your money back.
How do I go about developer activate?

Go to Settings , About phone, find "Build nr". Tap on it 7 times. It will show that you are a developer now.
Go back to System and find "Developer Options". Do what you want in there.
Don't change what you don't know !

I have same issue, on op11 chinese version and global oxygen os preinstalled

Why do people import the chinese one? Does it do anything the US one doesn't?

whoamanwtf said:
Why do people import the chinese one? Does it do anything the US one doesn't?
Click to expand...
Click to collapse
just cheaper

josip.2608 said:
just cheaper
Click to expand...
Click to collapse
Isn't the Chinese also available with 512 gig storage??? Not sure if it's cheaper for me ATM but 512 gig isn't officially available in Canada (nor USA) for any amount of cash. I'd love to find an economical import of one were it a viable option... Not like I need it with only 60 gig used out of my 256 gig 1+7T...

wugga3 said:
Isn't the Chinese also available with 512 gig storage??? Not sure if it's cheaper for me ATM but 512 gig isn't officially available in Canada (nor USA) for any amount of cash. I'd love to find an economical import of one were it a viable option... Not like I need it with only 60 gig used out of my 256 gig 1+7T...
Click to expand...
Click to collapse
I orderd 12/256 for 650 (had some discount)

Same issue. Found any fix for this? I downloaded the CPH2451_11_A.07 (incremental) from Oxygen OS Updater then used the One Plus updater apk to locally install it but it's does not work. Really need this update because the current system is buggy.

Just to be clear with everyone here with the CN version of phone not living in China. Once the phone leaves China, it stops being a phone. Nothing can be done to fix this that is free of charge. Also includes updates too.

brystfire08 said:
Same issue. Found any fix for this? I downloaded the CPH2451_11_A.07 (incremental) from Oxygen OS Updater then used the One Plus updater apk to locally install it but it's does not work. Really need this update because the current system is buggy.
Click to expand...
Click to collapse
i think the one you trying to install would just be as buggy by design though, i haven't heard/experienced a single issue-free cos to oos conversion.

MrSteelX said:
Just to be clear with everyone here with the CN version of phone not living in China. Once the phone leaves China, it stops being a phone. Nothing can be done to fix this that is free of charge. Also includes updates too.
Click to expand...
Click to collapse
Not true. Contact CS to open a RMA request. Mail your phone to local service center to unlock. Got mine "fixed" this way. I live in Canada.
Also region lock only applies if the phone is first activated in a different region, i.e. Insert a SIM card and connect to mobile network for the first time

Did you have to spend money to ship device since it was also part of the question.
henexekrar said:
Not true. Contact CS to open a RMA request. Mail your phone to local service center to unlock. Got mine "fixed" this way. I live in Canada.
Also region lock only applies if the phone is first activated in a different region, i.e. Insert a SIM card and connect to mobile network for the first time
Click to expand...
Click to collapse

MrSteelX said:
Did you have to spend money to ship device since it was also part of the question.
Click to expand...
Click to collapse
It's free. Even if you have to pay for shipping, what other choices do you have