Develop Bugs

[RECOVERY] [UNOFFICIAL] LR.Team TWRP 3.3.1-1119 for onclite by wzsx150

Disclaimer:
HTML:
/* Your warranty is now void! I'm not responsible for bricked devices, dead SD cards or anything else that may occur to you and / or your device.
* Do it at your own risk!
This recovery was not made by me, i'm just sharing it in easier ways to download. The guy behind this is wzsx150, thank him for it.
After a lot of pain researching and trying to download from Baidu servers i finally managed to get this custom TWRP to get rid of force encryption on stock MIUI because this recovery can successfully decrypt with no need to do a format data.
Just installed magisk v20.2 on stock MIUI global 11.0.4 and it works. :good:
Info
- Based on TWRP 3.3.1
- Build date: 2019.11.19
- Model: Redmi 7, Red Rice 7
- Developer: wzsx150 (profile)
Install Instructions
Warning: unlocked bootloader needed!
Fastboot
1. Download IMG file below
2. Rename file to recovery.img and put it into your adb path (if you don't have adb check this link)
3. Reboot your device into fastboot mode by holding down vol - and power button while device is off and connect to PC
4. Open cmd in your adb path and run the following command: fastboot flash recovery recovery.img
5. Run fastboot reboot, and hold down vol + key until device enters into twrp
Custom Recovery
1. Download ZIP file below to internal storage
2. Reboot to recovery
3. Install zip
4. Reboot to recovery
Downloads
IMG: https://drive.google.com/uc?id=16zXoYeviDUeV9zsSeDjyi_P8NnQkJhLr&export=download
ZIP: https://drive.google.com/uc?id=1ZF4C5-B9rlHKJVO0GbtS_ZjT5VlX1taH&export=download
Special Thanks
- TeamWin for building TWRP for a lot of devices, including this one
- wzsx150 and LR.Team for making this mod
- Firmwarex.net for providing a free Baidu account to download from their servers
Source: https://www.weibo.com/6033736159/IgY1Ex98h?from=page_1005056033736159_profile&wvr=6&mod=weibotime

Works backups AND restore opción?

mcf7 said:
Disclaimer:
/* Your warranty is now void! I'm not responsible for bricked devices, dead SD cards or anything else that may occur to you and / or your device.* Do it at your own risk!
This recovery was not made by me, i'm just sharing it in easier ways to download. The guy behind this is wzsx150, thank him for it.
After a lot of pain researching and trying to download from Baidu servers i finally managed to get this custom TWRP to get rid of force encryption on stock MIUI because this recovery can successfully decrypt with no need to do a format data.
Just installed magisk v20.2 on stock MIUI global 11.0.4 and it works. :good:
Info
- Based on TWRP 3.3.1
- Build date: 2019.11.19
- Model: Redmi 7, Red Rice 7
- Developer: wzsx150 (profile)
Install Instructions
Warning: unlocked bootloader needed!
Fastboot
1. Download IMG file below
2. Rename file to recovery.img and put it into your adb path (if you don't have adb check this link)
3. Reboot your device into fastboot mode by holding down vol - and power button while device is off and connect to PC
4. Open cmd in your adb path and run the following command: fastboot flash recovery recovery.img
5. Run fastboot reboot, and hold down vol + key until device enters into twrp
Custom Recovery
1. Download ZIP file below to internal storage
2. Reboot to recovery
3. Install zip
4. Reboot to recovery
Downloads
IMG: https://drive.google.com/uc?id=16zXoYeviDUeV9zsSeDjyi_P8NnQkJhLr&export=download
ZIP: https://drive.google.com/uc?id=1ZF4C5-B9rlHKJVO0GbtS_ZjT5VlX1taH&export=download
Special Thanks
- TeamWin for building TWRP for a lot of devices, including this one
- wzsx150 and LR.Team for making this mod
- Firmwarex.net for providing a free Baidu account to download from their servers
Source: https://www.weibo.com/6033736159/IgY1Ex98h?from=page_1005056033736159_profile&wvr=6&mod=weibotime
Click to expand...
Click to collapse
Thanks a lot ? so this should work to install any custom rom? Like the pixel experience one?
Sent from my Xiaomi Redmi 7 using XDA Labs

Jojethegamerpro said:
Works backups AND restore opción?
Click to expand...
Click to collapse
I haven't tested but it should work

SammyInTheCity said:
Thanks a lot ? so this should work to install any custom rom? Like the pixel experience one?
Click to expand...
Click to collapse
If you're planning to install a custom rom, any custom recovery should work, including this one.
The main advantage of using this recovery is that you can bypass the stock rom (maybe stock based roms too) force encryption to access your partitions on recovery.

mcf7 said:
If you're planning to install a custom rom, any custom recovery should work, including this one.
The main advantage of using this recovery is that you can bypass the stock rom (maybe stock based roms too) force encryption to access your partitions on recovery.
Click to expand...
Click to collapse
Okay thanks, I have my bootloader locked at the moment, but when I finally am able to unlock it I'll definitely use this
Sent from my Xiaomi Redmi 7 using XDA Labs

Thank you for sharing

Ask password for decryption
But my phone isn't encrypted
Tried my lock screen password it didn't work
Tried to remove all passwords but still asks for password

hamedhd said:
Ask password for decryption
But my phone isn't encrypted
Tried my lock screen password it didn't work
Tried to remove all passwords but still asks for password
Click to expand...
Click to collapse
Which recovery did you used before this? And what's your rom?
For the first time i used LR.Team's recovery i installed recovery, did a format data(due to the password issue as you), installed miui global and magisk and the system booted properly and after that recovery didn't asked for password anymore and i've been able to mount partitions and do other stuff.

I can't flash gapps using this twrp, fix it please

Me_Only said:
I can't flash gapps using this twrp, fix it please
Click to expand...
Click to collapse
I'm not the dev behind this project, i'm just sharing wzsx150's work in an easier way to download. You can contact him on the source link at the bottom of OP.
I only tested this twrp with stock rom which doesn't need gapps and encountered no issues.

mcf7 said:
I'm not the dev behind this project, i'm just sharing wzsx150's work in an easier way to download. You can contact him on the source link at the bottom of OP.
I only tested this twrp with stock rom which doesn't need gapps and encountered no issues.
Click to expand...
Click to collapse
same here but the custom roms that doesn't include gapps sucks, that's the problem with this twrp it cant flash gapps, thanks for the response bro.

Question Edit system files in Mi 11x

I have been using this Mi 11x (Indian variant of Poco F3/ Redmi K40). It has TWRP by Nebrassy as latest version of Magisk (v23) installed and working. Magisk is working in systemless mode. System structure shows partitions Slot A and Slot B in TWRP. Whenever I attempt to delete any system file using root privileged file manager it return 'failed to delete : error code 1'.
I did try deleting these files using TWRP file manager. There also it says 'failed, Code 1'.
What am I doing wrong. And how to correct it? Please help...
Running Os: Xiaomi.eu with version 12.5.4.0 with MIUI 12.5
Device : Mi 11x (Aliothin)

System files cannot be deleted after android 10

Thread '[SCRIPT][Android 10+] Universal Mount System read write R/W' https://forum.xda-developers.com/t/script-android-10-universal-mount-system-read-write-r-w.4247311/
Here I just got the solution... I just installed the flashable.zip file through TWRP in my poco f3 with xiaomi.eu and it was full success in first attempt.

Suryashis said:
Thread '[SCRIPT][Android 10+] Universal Mount System read write R/W' https://forum.xda-developers.com/t/script-android-10-universal-mount-system-read-write-r-w.4247311/
Here I just got the solution... I just installed the flashable.zip file through TWRP in my poco f3 with xiaomi.eu and it was full success in first attempt.
Click to expand...
Click to collapse
seems very hard for me... can explain better how ? thanks

Angyone1 said:
seems very hard for me... can explain better how ? thanks
Click to expand...
Click to collapse
I worked on my mi 11x with unlocked, magisk rooted Xiaomi.eu 12.5.4.0 rom (android 11). I just downloaded the flashable zip file from the site attached) and installed it in TWRP recovery. Pretty straight forward... But u need to have atleast 20gb internal memory free, where a backup of your super.img will be stored (u can delete this later). My advice is to go through the thread once since I have read certain feedbacks where the device went into bootloop.

Suryashis said:
I worked on my mi 11x with unlocked, magisk rooted Xiaomi.eu 12.5.4.0 rom (android 11). I just downloaded the flashable zip file from the site attached) and installed it in TWRP recovery. Pretty straight forward... But u need to have atleast 20gb internal memory free, where a backup of your super.img will be stored (u can delete this later). My advice is to go through the thread once since I have read certain feedbacks where the device went into bootloop.
Click to expand...
Click to collapse
Be sure to mount System, Vendor, Product atleast before starting the installation process in TWRP

Question LISA development

Xiaomi 11 lite 5G NE - alias LISA - different opinions - can or not be included in 11 lite 5G?​In other words - TWRP for RENOIR works for LISA also? or not?
Same with roms here.
xiaomi.eu posted a recovery - PitchBlack Recovery V3.1.0 for Xiaomi 11 lite 5G NE.
I am not in knowledge to see the differences, but as long as the 100 something...days will pass, I will unlock bootloader and try...
And I wait for more experienced folks to comment on LISA development. Thank you.

adroeurope said:
Xiaomi 11 lite 5G NE - alias LISA - different opinions - can or not be included in 11 lite 5G?​In other words - TWRP for RENOIR works for LISA also? or not?
Same with roms here.
xiaomi.eu posted a recovery - PitchBlack Recovery V3.1.0 for Xiaomi 11 lite 5G NE.
I am not in knowledge to see the differences, but as long as the 100 something...days will pass, I will unlock bootloader and try...
And I wait for more experienced folks to comment on LISA development. Thank you.
Click to expand...
Click to collapse
pitch black doesn(t work on renoir...so I suppose that renoir TWRP doesn't work on Lisa

PitchBlack Recovery V3.1.0 for Xiaomi 11 lite 5G NE. It's there. For those who have LISA, I will try to post here all the news I'll find. Others are invited to help too. There ARE differences between the 2 models, so I think any info about LISA is important for owners.​

A link with interesting things for Lisa...

https://mifirm.net/model/lisa.ttt#eea - Here you can find firmware.

Following

Asked Nebrassy if his twrp is working for LISA. Otherwise, we only have PitchBlack Recovery V3.1.0 for Xiaomi 11 lite 5G NE. Hopefully today willl end the 100plus hours for unlock. I will keep U informed.

Well...unlocked-fastboot-further are 2 choises-temporary or permanent.
Flash it permanent
- fastboot flash recovery PitchBlack-recovery.img /// DOES NOT WORK - writing recovery FAILED recovery_b No such partition.
Temporary
fastboot boot PitchBlack-recovery.img - ok, PitchBlack-recovery started by I was unable to mount/backup anything. Of course, at reboot PitchBlack dissapears.
An reply: "On other a/b devices xiaomi.eu team fixed this and if you will flash the xiaomi.eu rom (if its available for your phone) TWRP will be permanent."
So....untill a rom from xiaomi.eu team will appear for LISA, no custom recovery...am I wrong?

There is no recovery partition in a/b devices
Instead you boot to pbrp recovery then flash recovery to ramdisk from there but you would need to have it on extcard as internal storage would be encrypted

I hope that they make a twrp for lisa.
I will follow your posts.
adroeurope said:
PitchBlack Recovery V3.1.0 for Xiaomi 11 lite 5G NE. It's there. For those who have LISA, I will try to post here all the news I'll find. Others are invited to help too. There ARE differences between the 2 models, so I think any info about LISA is important for owners.​
Click to expand...
Click to collapse

There is now a fastboot EU rom for lisa

There is now official arrow os for Lisa as well

AS anyone arrive to flassh Arrow Os on LISA ? I'm stuck on PBRP recovery with encrypted data...

Ok ! I finally arrive to do something.
There is a LineageOS Recovery here : https://drive.google.com/file/d/1gYAVTitz5uSP5_MO4KkXdYOvPmIvC2oJ/view?usp=sharing
- Once you get it, boot your phone to fastboot.
adb reboot bootloader
- Then, install the LineageOS-recovery.img
fastboot flash boot_ab LineageOS-recovery.img
- Boot to recovery :
fastboot reboot recovery
- Erase your data.
- Go to Apply Update, then SD card and apply the Arrow zip file.
- Wait for it !
- When on LineageOS recovery again, reboot system now.
And, you got it !

Thanks @GTG305 !! Where did this recovery come from?
Edit:
When you say "Go to Apply Update, then SD card and apply the Arrow zip file.", does this mean you're copying the ArrowOS zip onto a micro-sd card and running LOS recovery with this card inserted?
Without an sd card inserted, I only get the "Apply from ADB" which does not enable sideload correctly.

I have found it on another post !

Pebs74 said:
Thanks @GTG305 !! Where did this recovery come from?
Edit:
When you say "Go to Apply Update, then SD card and apply the Arrow zip file.", does this mean you're copying the ArrowOS zip onto a micro-sd card and running LOS recovery with this card inserted?
Without an sd card inserted, I only get the "Apply from ADB" which does not enable sideload correctly.
Click to expand...
Click to collapse
Yes, I copied it on the sd card before.
WIthout sd card, you can try to copy it to your internal storage with adb like this :
./adb push Arrow-v11.0-lisa-OFFICIAL-20211219-VANILLA.zip /data/media/0/
But i don't tried it.

I managed to install ArrowOs using the LOS recovery method described by @GTG305, thanks dude!
ATM I've found only a few bugs/annoyances:
The auto-brightness control seems to be a bit "nervous" and, under certain light conditions, tends to change continually. It does seem to "calm down" with time, maybe it has a calibration period.
The other thing I've had a few hickups with has been the swiping navigation gestures. There have been a few times where, after an unknown error, the swipe-up for "back" stopped working. Swipe-left and swipe-right kept working, but I had to reboot to get swipe-up working again.
Apart from that, I'm pleasantly surprised by the ROM's stability, at least during the first 24h using it.
UPDATE:
The auto-brightness issue seems to have solved itself on its own, there may be a calibration period as I suggested, which now makes it work correctly.
Even so, I have to report another issue with the brightness control: the minimum brightness in ArrowOS is equivalent to 30-40% brightness on the stock MIUI ROM, so on very dark conditions, the brightness is too high and quite annoying. (Can you confirm this @GTG305?)

Pebs74 said:
I managed to install ArrowOs using the LOS recovery method described by @GTG305, thanks dude!
ATM I've found only a few bugs/annoyances:
The auto-brightness control seems to be a bit "nervous" and, under certain light conditions, tends to change continually. It does seem to "calm down" with time, maybe it has a calibration period.
The other thing I've had a few hickups with has been the swiping navigation gestures. There have been a few times where, after an unknown error, the swipe-up for "back" stopped working. Swipe-left and swipe-right kept working, but I had to reboot to get swipe-up working again.
Apart from that, I'm pleasantly surprised by the ROM's stability, at least during the first 24h using it.
Click to expand...
Click to collapse
Did you try to sideload it or did you use a sd card?

edzel13 said:
Did you try to sideload it or did you use a sd card?
Click to expand...
Click to collapse
LOS recovery sideload didn't work for me, my phone wasn't detected by the PC. I had to copy the ROM onto an sdcard and load it from there.

How To Guide K40s flash miui.eu rom

Since I am in mainland China, after seven days waiting, I unlocked my k40s finally.
Get ROM from xiaomi.eu link to thread of stable release is https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
Download in sourceforge: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
I downloaded two roms:
1. xiaomi.eu_multi_MUNCH_V13.0.7.0.SLMCNXM_v13-12-fastboot.zip
2. xiaomi.eu_multi_MUNCH_V13.0.10.0.SLMCNXM_v13-12.zip
### First one:
I use script inner zip to flash, success.
### The second one:
At first I can't boot from twrp.img after search by Google I found out that I run fastboot command in fastbootd env.
There is a ref: https://forum.xda-developers.com/t/fastboot-error-no-such-file.4483677/
I boot to fastboot (Not fastbootD) by command
Code:
adb reboot bootloader
And I can boot the twrp and flash the second rom.
The guide of flash second rom is
Code:
1. push rom to sdcard
2. adb reboot bootloader
3. fastboot boot twrp.img
4. Install rom in TWRP
5. Clear data & format
Update
This guide is for MIUI13 and maybe there's something different of current MIUI14 ROM.

Latest TWRP https://dl.akr-developers.com/?dir=skkk/TWRP/A12/v6.3_A12
BOOT VERSION A12
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img
then in Twrp go to Advanced -> flash current TWRP
Reboot TWRP​

hello there...
i am arsh from india. i have unlocked the bootloader of my poco f4 only to flash eu rom. i have unlocked, installed twrp and then i flashed eu rom zip file. In the last step when i try to do format data, i got an error unable to mount system and it was unsuccessful. So without rebooting to system i again rebooted to twrp to perform format data and again same error appeared. later i chaged boot slot from a to b and then performed format data and then it says "no os installed". So i changed slot again to a and then i booted to system and i am able to boot into eu rom.
My Question did i perform the flash correct???
I noticed when i m using eu rom battery is draining faster than global rom...what is your opinion??

psklf said:
Since I am in mainland China, after seven days waiting, I unlocked my k40s finally.
Get ROM from xiaomi.eu link to thread of stable release is https://xiaomi.eu/community/threads/miui-13-stable-release.64441/
Download in sourceforge: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv13/
I downloaded two roms:
1. xiaomi.eu_multi_MUNCH_V13.0.7.0.SLMCNXM_v13-12-fastboot.zip
2. xiaomi.eu_multi_MUNCH_V13.0.10.0.SLMCNXM_v13-12.zip
### First one:
I use script inner zip to flash, success.
### The second one:
At first I can't boot from twrp.img after search by Google I found out that I run fastboot command in fastbootd env.
There is a ref: https://forum.xda-developers.com/t/fastboot-error-no-such-file.4483677/
I boot to fastboot (Not fastbootD) by command
Code:
adb reboot bootloader
And I can boot the twrp and flash the second rom.
The guide of flash second rom is
Code:
1. push rom to sdcard
2. adb reboot bootloader
3. fastboot boot twrp.img
4. Install rom in TWRP
5. Clear data & format
Click to expand...
Click to collapse
hello there...
i am arsh from india. i have unlocked the bootloader of my poco f4 only to flash eu rom. i have unlocked, installed twrp and then i flashed eu rom zip file. In the last step when i try to do format data, i got an error unable to mount system and it was unsuccessful. So without rebooting to system i again rebooted to twrp to perform format data and again same error appeared. later i chaged boot slot from a to b and then performed format data and then it says "no os installed". So i changed slot again to a and then i booted to system and i am able to boot into eu rom.
My Question did i perform the flash correct???
I noticed when i m using eu rom battery is draining faster than global rom...what is your opinion??

arsh011 said:
hello there...
i am arsh from india. i have unlocked the bootloader of my poco f4 only to flash eu rom. i have unlocked, installed twrp and then i flashed eu rom zip file. In the last step when i try to do format data, i got an error unable to mount system and it was unsuccessful. So without rebooting to system i again rebooted to twrp to perform format data and again same error appeared. later i chaged boot slot from a to b and then performed format data and then it says "no os installed". So i changed slot again to a and then i booted to system and i am able to boot into eu rom.
My Question did i perform the flash correct???
I noticed when i m using eu rom battery is draining faster than global rom...what is your opinion??
Click to expand...
Click to collapse
Which rom and TWRP?

NOSS8 said:
Which rom and TWRP?
Click to expand...
Click to collapse
Eu rom 14.0.3.0,
Twrp - twrp-3.7.0_12-0-munch

arsh011 said:
Eu rom 14.0.3.0,
Twrp - twrp-3.7.0_12-0-munch
Click to expand...
Click to collapse
Ok, which rom were you on before flashing?

NOSS8 said:
Ok, which rom were you on before flashing?
Click to expand...
Click to collapse
i was on miui global stable rom version 13.0.6

arsh011 said:
i was on miui global stable rom version 13.0.6
Click to expand...
Click to collapse
The rom you flashed is not the latest.xiaomi.eu_multi_MUNCH_V14.0.5.0.TLMCNXM_v14-13.zip
to update you must update the twrp from A12 to A13 and use the OTA.
This rom is hybrid, which means you can update it with a pc and fastboot using the update.bat script included in the extracted zip folder.
If you haven't installed all your apps, use the First install .bat file.
The procedure for a first installation with TWRP is as follows:
Twrp/format data type yes reboot Twrp(if errors ,reds lines ,start again by restarting on the Twrp at each try.
Then sideload the rom or use OTG.
Errors remaining at the end of the flash, ignore them.
Delete the lock screen security before all opérations.

NOSS8 said:
The rom you flashed is not the latest.xiaomi.eu_multi_MUNCH_V14.0.5.0.TLMCNXM_v14-13.zip
to update you must update the twrp from A12 to A13 and use the OTA.
This rom is hybrid, which means you can update it with a pc and fastboot using the update.bat script included in the extracted zip folder.
If you haven't installed all your apps, use the First install .bat file.
The procedure for a first installation with TWRP is as follows:
Twrp/format data type yes reboot Twrp(if errors ,reds lines ,start again by restarting on the Twrp at each try.
Then sideload the rom or use OTG.
Errors remaining at the end of the flash, ignore them.
Delete the lock screen security before all opérations.
Click to expand...
Click to collapse
tq for the reply. a few hours ago i updated the eu rom to latest version via twrp. for now everything is working. i would like to know some things.
1. imo the battery backup with eu rom is terrible compared to global stable rom. whats your view about that??
2. Are there any heating issues with eu rom 14 ?
3. can we revert to stock rom and lock bootloader?

arsh011 said:
tq for the reply. a few hours ago i updated the eu rom to latest version via twrp. for now everything is working. i would like to know some things.
1. imo the battery backup with eu rom is terrible compared to global stable rom. whats your view about that??
2. Are there any heating issues with eu rom 14 ?
3. can we revert to stock rom and lock bootloader?
Click to expand...
Click to collapse
Not having this device, I cannot answer the first 2 questions precisely but on my 12 pro(Xiaomi Eu rom) the switch to A13 was beneficial for both.(Have you just updated? Give the system time to optimize itself).
3/Use miflash (if you have an F4 and not a K40s).
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com

How To Guide [Recovery] [13] [12] TWRP & OrangeFox

Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka ADB) and USB drivers should be set beforehand. Latest versions are reliable enough. PixelExperience, PixelOS and MIUI (official and Xiaomi.eu) ROMs have been tested. Before proceeding to flash, make sure about your ROM type (standard or vendor_boot) to avoid not desired consequences. Blew are the most recent versions.
_________________________________________________________________________
TWRP (standard)
Android 12:
twrp-3.7.0_12-v7.7_A12-alioth-skkk.img
Android 13:
twrp-3.7.0_12-v7.8_A13-alioth-skkk.img
[Instructions]
1. Reboot to fastboot mode.
2. Execute command below in ADB on PC:
fastboot boot "recovery.img"
Click to expand...
Click to collapse
"recovery.img" being your downloaded recovery file address.
3. Choose "Flash current TWRP" from TWRP's "Advanced" option.
4. Reboot.
_________________________________________________________________________
OrangeFox (standard)
Android 12+:
[email protected]_3_A12.zip
[Instructions]
1. Reboot to TWRP.
2. Choose "ADB Sideload" from TWRP's "Advanced" option.
3. Execute command below in ADB on PC:
adb sideload "recovery.zip"
Click to expand...
Click to collapse
"recovery.zip" being your downloaded recovery file address.
4. Reboot.
_________________________________________________________________________
OrangeFox (vendor_boot)
Read this thread for a detailed explanation and list of vendor_boot ROMs.
This is beta release. Treat it as such.
Android 13:
[email protected]_1_vendor_boot_vBaR.zip
[Instructions]
1. Reboot to your ROM's recovery.
2. Choose "ADB Sideload" from recovery's "Advanced" option.
3. Execute command below in ADB on PC:
adb sideload "recovery.zip"
Click to expand...
Click to collapse
"recovery.zip" being your downloaded recovery file address.
4. Reboot.
OR
1. Reboot to fastboot mode.
2. Extract downloaded recovery zip file.
3. Execute command below in ADB on PC:
fastboot flash vendor_boot "recovery.img"
Click to expand...
Click to collapse
"recovery.img" being your extracted recovery image address.
4. Reboot.
OR
1. Reboot to fastboot mode.
2. Extract downloaded recovery zip file.
3. Run "flash-whole-image.bat" file.
4. Reboot
_________________________________________________________________________
Ps: though there are some glitches, both recoveries can install Magisk to root the device.
_________________________________________________________________________
Sourceforge archive page
OrangeFox homepage
Platform Tools download page
Google USB Driver download page

Last time I tried installing lineageos using latest twrp it failed miserably

heybaybee said:
Last time I tried installing lineageos using latest twrp it failed miserably
Click to expand...
Click to collapse
Me too, better use its recovery.

New versions available. Links have been updated.

rashazad said:
New versions available. Links have been updated.
Click to expand...
Click to collapse
Thanks for the thread. Does the latest version support flashing MIUI Global ROMs? Im having a hard time flashing them via TWRP SKK 3.7.0_A12_V6.7_A13.

I tried to flash TWRP 3.7.0_7.7_13 and now my phone is in bootloop.

panjgoori said:
I tried to flash TWRP 3.7.0_7.7_13 and now my phone is in bootloop.
Click to expand...
Click to collapse
Which ROM are you using?

DarthJabba9 said:
Which ROM are you using?
Click to expand...
Click to collapse
MIUI EU 13.0.9

panjgoori said:
MIUI EU 13.0.9
Click to expand...
Click to collapse
So, you have flashed an A13 recovery on an A12 ROM? Of course you will have issues. You need to flash the correct recovery.

DarthJabba9 said:
So, you have flashed an A13 recovery on an A12 ROM? Of course you will have issues. You need to flash the correct recovery.
Click to expand...
Click to collapse
I accidently bricked my phone and its in EDL Mode now. Can you help me please

panjgoori said:
I accidently bricked my phone and its in EDL Mode now. Can you help me please
Click to expand...
Click to collapse
Sorry, I know nothing about EDL mode for this device. But I'm sure there are lots of tutorials on XDA or in a general Google search.

Vendor_Boot recovery links and instructions added.
Small changes made in instructions.

New version (7.8) for TWRP A13 (standard).
New version (11.1_1) for OFox (vendor_boot).

New version (11.1_3) for OFox (standard).

DarthJabba9 said:
So, you have flashed an A13 recovery on an A12 ROM? Of course you will have issues. You need to flash the correct recovery.
Click to expand...
Click to collapse
For those who want to.. I too thought as do @DarthJabba9 but...
I've bought a new poco F3, wich was with A12 MIUI. I tried to flash skkk twrp A12, then flash FW V14.xxx (A13), then skkk twrp A13 (trough twrp itself, or in fastboot) => bootloop, with or without rebooting in between..
It finally worked with only flashing skkk twrp A13 (on A12 MIUI), then FW V14.xx, then rom etc.
Hope it can help

néonaloj said:
For those who want to.. I too thought as do @DarthJabba9 but...
I've bought a new poco F3, wich was with A12 MIUI. I tried to flash skkk twrp A12, then flash FW V14.xxx (A13), then skkk twrp A13 (trough twrp itself, or in fastboot) => bootloop, with or without rebooting in between..
It finally worked with only flashing skkk twrp A13 (on A12 MIUI), then FW V14.xx, then rom etc.
Hope it can help
Click to expand...
Click to collapse
That's a very atrange way to have latest fw.
How did you flash twrp through twrp?
Please describe what you have done clearly.
Restarts are necessary.
Also if you plan to have a clean flash, which is recommended, there are much easier and straight forward methods.

rashazad said:
1. Reboot to fastboot mode.
2. Extract downloaded recovery zip file.
3. Execute command below in ADB on PC:
"recovery.img" being your extracted recovery image address.
4. Reboot.
Click to expand...
Click to collapse
Tried using this method but I am getting the following error on AOSPA: FAILED (remote: 'Error flashing partition : Volume Full')

nehalchoy said:
Tried using this method but I am getting the following error on AOSPA: FAILED (remote: 'Error flashing partition : Volume Full')
Click to expand...
Click to collapse
That error does not seem to be related to the process.
Something (probably free apace) is wrong about your pc or phone.
What ROM were you using?

rashazad said:
That's a very atrange way to have latest fw.
How did you flash twrp through twrp?
Please describe what you have done clearly.
Restarts are necessary.
Also if you plan to have a clean flash, which is recommended, there are much easier and straight forward methods.
Click to expand...
Click to collapse
Well I didn't want to make a complete tutorial ...
To flash twrp trough twrp, 'install' > change with "image" > install the recovery.img.. It has always worked, for long years..
About flashing a A13 rom (++) coming from MIUI A12 (I each time restarted from scratch, re-installing global MIUI) : I've tried a lot of ways.
I began to install A12 twrp skkk in fastboot mode (1st 'boot' then flash), reboot to recovery, then upgrade to A13 twrp through twrp (reboot to recovery), then A13 FW > bootloop ;
I tried flash A12 twrp (fastboot)(reboot to recovery), then A13 twrp (fastboot too)(reboot to recovery), flash FW > bootloop ;
I also tried A12 twrp (reboot to recovery), then FW (reboot to recovery ok), A13 twrp (reboot to recovery) > bootloop...
I won't list all what i did ! but finally I flashed A13 twrp directly on A12 MIUI (reboot to recovery ok), flash FW (reboot to recovery ok) and that worked. I then flashed my A13 rom (without rebooting system first) > reboot to recovery +reboot system, and finally flashed Gapps, magisk and other stuff. I do know it's not a common way, but the one that worked.
EDIT : I do know it can work (maybe even easier) to flash the MIUI A13 fastboot rom, but had a other device hard bricked some time ago doing this. That's why i tried to only flash the FW
PS : if you can help, I've only one issue to solve yet : I've flashed magisk 26.1, i could have bank & pro apps to work correctly, the only app that I cannot is the FAI tv (error P531 'can't reach my account' (even if i'm well connected), probably root detected.. thanks ! (ofc it's on the deny list, with magisk modules such as Universal Safetynet Fix, zygisk ....)
And edit 2 : I forgot to thank you for this thread !

Common way to flash rom with upgrade (not update) is clean install.
Also, magisk handles safetynet with no problem. No need for that. And zygisk is not module.
For that specific application, check that it is fully selected in zygisk since sometimes all checkboxes for application is not selected.
You're welcome