Develop Bugs

[help] recognise RSDlite my defy in bootloader

ok here is the issue.
i wanted to try the defy+ rom which required to start on bootloader mode and flash fixed sbf
i have installed rsd lite and moto drivers. rsd detects it when the phone is fully on.
but if i put my phone on bootloader mode (vol+power), rsdlite doesn't detects it.
please help me, i haven't started to install the ROM and i am on stock froyo 2.2.2

How to flash LG G Pro Lite offline

Alright, now i'm going to show you how to flash LG G pro lite using LG flash tool, this method does not required internet connection (offline).
So basically you need to download the kdz firmware for LG G pro lite and LG flash tool, this way you can flash your phone offline.
You maybe asking, why do i need to flash my phone? well here's some reasons why you want to flash your LG G pro lite:
your phone stuck in bootloop
you want to completely unroot the phone
you want to upgrade from jelly bean to kitkat
you want to downgrade from kitkat to jelly bean
your phone runs very slow and you want fresh install
you want to sell your phone
Remember that this is a DWYOR tutorial, means do with your own risk, this flashing method is tested successfully by me, but i'm not responsible if you damaged your phone.
Here's all the ingredients for this tutorial (stuff that you need)
LG united mobile driver,
LG G pro lite kdz firmware
LG flash tool 2014,
Visual C++ runtime
Computer running windows ( i use windows 7)
The LG G pro lite itself
Micro USB cable
Donuts and coffee with less sugar
Courage and confidence
Okay, after you get all the ingredients, we can begin to flash the phone, and don't forget to backup your data first, because all data inside internal memory will be gone after flashing.
Step by step how to flash LG G pro lite
install LG united mobile driver
install Visual C++ runtime
run LGFlashTool2014.exe
select type "CDMA" and phone mode as "DIAG"
select the kdz file (the firmware that you're going to use to flash the phone)
put the phone into download mode, read my previous article if you don't understand
click on "Normal Flash"
click ok on "select country & language" window
wait until the whole process finish
It's actually very easy to flash LG G pro lite offline using LG flash tool, now you can go from jelly bean to kitkat back and forth.
This flashing method could also be applied to other LG smartphones that runs android, such as LG G3, G2, G2 mini, etc.
NOTE
when i was flashing my G pro lite dual from kitkat 4.4.2 to jelly bean 4.1.2, after finish flashing i got stuck on boot logo, i solve this by doing factory hard reset and the phone boot normally.
make sure when you plug the phone to computer (download mode) there is no error message, install the latest LG united mobile driver.
it is recommended that you do factory reset before flashing your phone.

MEDY123 said:
Alright, now i'm going to show you how to flash LG G pro lite using LG flash tool, this method does not required internet connection (offline).
...
Click to expand...
Click to collapse
Wrong Forum...

Theres already a back to stock thread..
http://forum.xda-developers.com/showthread.php?t=2420219

As mentioned above there is already a thread for this here. As we do not need 2 guides for the same thing I am closing this one.
Thread closed

[Q] Stuck in download mode

Just bought one of these great devices and naturally proceed to brick it.
I was following the the instructions to downgrade to the original firmware and got to the part of flashing with the lg tool and ignoring the error dialogs. After 30+ minutes nothing seemed to be happening so i unplugged it and now it is stuck in download mode. When i try to use the official lg tool to flash the official software it downloads the official software and crashes when it tries to extract it. Help please?

Holy Crap! I fixed it somehow! Not quite sure what did it though. I Changed the port for the LG ANDROID USB SOMETHING in device manager to port 47 and in Lg Flash tool used "normal flash" instead of CSE FLASH. Flashed with no errors. Damn that was scary....

Hard-bricked LG G3 D858HK

Will you please, please help me!
It seems I've hard-bricked my LG G3 D858HK Dual Sim 4G LTE 32GB. It wasn't updating the firmware (only found out 3 weeks after warranty expired). So, successfully flashed the ROM to Marshmellow 6.0, then tried to root it with (mistakenly) wrong firmware - lollipop app/tool.
Problems: black screen, won't boot (red & blue light flashing), won't go into download mode, computer not recognising phone/USB is plugged into - even with right drivers installed.

Best stock to flash via qpst

I don't flash any stock rom since Q3 2016 and now i need newer base to flash latest customs. What is best stock rom that i can flash via QPST? I mean which one is most actually (i know there is oreo but it's hard to find no modded version)

Deep flash cable
I needed to make a deep flash cable. It was impossible to get into EDL. I had installed stock ROM while the drive was encrypted and the new install was installed in it just fine, but the pattern was only a piece you needed to decrypt. The rest was in the OS I wiped. So I had to use the cable to get into edl.

Instead of EDL flash cable use this trick
Connect your phone to your PC in EDL mode:
Youtube Video: v=DexLELi04XY
Title: EDL MODE Lenovo Z2 | Lenovo z2132
(sorry, can't post link)