Related
Hi y'all, first off I have the G920P, just recently upgraded to Nougat QC7 stock ROM, modified and running the SkyHigh kernel v5.01 with Magisk v12. Everything runs pretty smooth, even got Liveboot working successfully (there's a reason I mention Liveboot.) Now I decided to try to get Viper4Android to work. Of course, installing the standard apk fails when it comes to installing the driver. So I tried the V4A Magisk module and it installed fine, however on reboot, my Liveboot no longer works and when opening the V4A app it asks to install the driver, I hit yes and it says it successfully installed and to please reboot. I reboot and of course Liveboot still doesn't show, but otherwise it boots fine. Once I re-open the V4A app it is asking me to install the driver yet again, and the whole system at times seems a bit unstable until I disable the V4A module in Magisk Manager. Does anyone have any ideas, or has anyone gotten this to successfully work? If so I'd love a suggestion lol. I really would like to keep my Liveboot working, but I'd kinda like to get Viper working too. Thanks in advance for any help, suggestions, ideas, etc.
Chuck
I could not get the V4A module to install under Magisk 12; however, it works just fine with Magisk 13.
This is the version that I used: https://www.androidfilehost.com/?fid=745425885120735287
Magisk Uninstaller (should not be needed, but if you want it) is here: https://www.androidfilehost.com/?fid=745425885120735289
NOTE: You are, I believe using the @tdhite kernel, which is based in Magisk 12. Not sure what the impact of installing Magisk 13 will be.
The kernel is fine with Magisk v13 (beta, to be sure is all that is released there). Magisk v13 beta still has problems, so beware. The SkyHigh kernel and module are v13 compatible as much as v12, just so you know. The reason v12 is packaged in is v12 is the only stable Magisk version at this point.
The bigger issue is Magisk v13 beta working stably and reliably, but if you are willing to debug its failures, it's ok. There should be no need to uninstall to upgrade if you want to play. Reloading the kernel flash will cleanly load up v12 if all goes badly.
Sent from my iPad using Tapatalk
@koop1955 Thank you for that information! I will bookmark those so I can get back to them once v13 is reliable and stable enough for my kernel
@tdhite Thanks bud as Well! I think I will just stay where I am until the kernel and v13 play nicely. Just got this thing as perfect as I can for now, well other than ram use creeping up, but that's only every now and then, and for another topic. I *might* get my nandroid current and play a little if I get bored and want to tinker. I guess I can safely assume then the reason Liveboot stops working with the V4A module installed is because of Magisk v12...?
Thank you to both of you guys for the help and advice. At least now I know it's not some dumb issue with my device lol.
Chuck
@digitalchaos1980 and @tdhite, I have had a good experience with one particular version of Magisk 13, which is why I added it to my AFH. Other and newer versions...not so much. To be expected with a work in progress.
At some point, Magisk 13 will be final and we can move forward.
koop1955 said:
@digitalchaos1980 and @tdhite, I have had a good experience with one particular version of Magisk 13, which is why I added it to my AFH. Other and newer versions...not so much. To be expected with a work in progress.
At some point, Magisk 13 will be final and we can move forward.
Click to expand...
Click to collapse
No doubt! Version 13 gives me something to look forward to for sure
Chuck
digitalchaos1980 said:
Hi y'all, first off I have the G920P, just recently upgraded to Nougat QC7 stock ROM, modified and running the SkyHigh kernel v5.01 with Magisk v12. Everything runs pretty smooth, even got Liveboot working successfully (there's a reason I mention Liveboot.) Now I decided to try to get Viper4Android to work. Of course, installing the standard apk fails when it comes to installing the driver. So I tried the V4A Magisk module and it installed fine, however on reboot, my Liveboot no longer works and when opening the V4A app it asks to install the driver, I hit yes and it says it successfully installed and to please reboot. I reboot and of course Liveboot still doesn't show, but otherwise it boots fine. Once I re-open the V4A app it is asking me to install the driver yet again, and the whole system at times seems a bit unstable until I disable the V4A module in Magisk Manager. Does anyone have any ideas, or has anyone gotten this to successfully work? If so I'd love a suggestion lol. I really would like to keep my Liveboot working, but I'd kinda like to get Viper working too. Thanks in advance for any help, suggestions, ideas, etc.
Chuck
Click to expand...
Click to collapse
if you kindly Tell me the process how did you end up using Live boot in magisk , It would be very helpful . I have tried various method but failed
Saafir said:
Place a copy of audio effects.conf in vendor/etc. Should get you working. Be sure to set permissions as well.
Click to expand...
Click to collapse
Just to be sure, folks realize there is full equalizer support in my SkyHigh kernel and the bands are all adjustable, even per channel if desired, in Synapse, right? Just noting in case that's all you need, because it is a no-CPU-load way of getting it done.
Sent from my iPad using Tapatalk
Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!
received the update too
seleucid said:
Hello,
I have version D85130e installed on my phone and am rooted on the stock ROM. I received a System update notice this morning so i thought there was a new software version for the phone, but when I check on the T-mobile site for the LG G3, it says that D85130e is the latest version. (Cant post links because I am a new user).
I am confused, has anyone else received this update? I couldn't find anything about it. It is 133.0MB in size and says that it 'includes Android Security updates among other changes'.
I don't want to install it in case in breaks my root or worse. Does anyone here have any information about this?
Thank you!
Click to expand...
Click to collapse
tho i was disappointed it wasn't a 7.0 update, but i'm installing it right now and i would love to know: what's new?
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
from what I read yesterday, it's the D85130G update. https://goo.gl/ktuJMP
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash
jdmst77 said:
from what I read yesterday, it's the D85130G update.
I don't want to chance unrooting my phone with this update. I'll wait till there is a rooted version to flash
Click to expand...
Click to collapse
You can flash the update from the zip above and then flash magisk. That worked for me, I have v30G and root access. Thanks to MESA for suggesting it.
edit: MESA already said this above.
Stable update by MESA. No need to think about losing root access as MAGISK does the trick perfectly.
Everything is stable so far after 2 days of usage. I'll continue to give updates as and when I detect something unusual.
@eadumensah: is your safetynet working with MAGISK?
MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
Thanks for keeping this old phone alive, it's running much better after the update. I just flashed it right over everything.
bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Not anymore. It worked on V12 but stopped after I upgraded to v13. Let me know in case you get a solution to that.
bluehacker007 said:
@eadumensah: is your safetynet working with MAGISK?
Click to expand...
Click to collapse
Ignore my earlier update. It does now after upgrading to v13.2
eadumensah said:
Ignore my earlier update. It does now after upgrading to v13.2
Click to expand...
Click to collapse
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.
eadumensah said:
I got rid of xposed and deleted the play store data. Got into the magisk hide option and checked the following
1. Google play store
2. Google services framework
This is to hide it from detection by google. You can try it without deleting xposed first and let's see the outcome.
Click to expand...
Click to collapse
Tried that but it did not work. If I enable magisk core only mode (which disables systemless xposed) then I can pass security check. The only other magisk module I have is unified hosts adblock and I very much doubt that that is causing the safetynet failure.
Interesting side note: I've deleted apps from /system/apps and /system/priv-app from TWRP and I've changed the DPI using texdroider and these changes don't seem to trip safetynet.
lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do
---------- Post added at 11:20 PM ---------- Previous post was at 10:43 PM ----------
MESA said:
Its a April security update. I will make a flashable zip with it. If anyone wants to try it pm me and I will share the link when its uploaded.
Link to try it: https://forum.xda-developers.com/showpost.php?p=72931940&postcount=98 Flash MagiskSU after flashing the zip.
Click to expand...
Click to collapse
lg g3 d851 30e MM not rooted
please help
i have an lg g3 d851 30e MM not rooted
i want to root(magisk systemless root) my lg g3 instal twrp and get the firmware v30G !!!!
what should i do
bluehacker007 said:
After a lot of testing it seems to me that safetynet works fine until I install xposed. Furthermore, installing systemless xposed from the magisk repository results in failure to boot. If I install systemless xposed from the xposed materialdesign app I am able to boot and use xposed modules but my safetynet check fails. I'm using magisk v13.2, magisk manager v5.0.6, material xposed installer v3.0.1 and systemless xposed v87.0 sdk 23 by topjohnwu.
Edited to add versions.
Click to expand...
Click to collapse
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E
jdmst77 said:
so you were able to get xposed to install and work correctly on 30G? Please confirm
whenever I tried, I could never boot up the device. If failing safetynet means that i can have xposed on 30G, I'm ready to upgrade from 30E
Click to expand...
Click to collapse
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.
bluehacker007 said:
I did get xposed to work but don't download and install the framework from the magisk app - use the xposed material design app to download and install the framework. I'm not sure why the magisk supplied framework doesn't work - it caused me to get stuck at boot as well.
Click to expand...
Click to collapse
I've been waiting for this info to upgrade. Thanks for all the details, including version, etc
Hei whatsup folks....So Trying Custom Roms..Right...Most Of The Time You May Came across Problem in Installing "Greenify4Magisk" In Magisk as it Only Support Until SDK 27.So...i too faced same problem when trying to install Greenify as System app...and To Be frank This Zip Is Just Edited Version...all Credits Goes to Original Devs Who craeted It.So By Using This Zip You Will Be Able To Use
Greenify In Pie roms and Also as a system app...Just Import In Magisk Modules and reboot...It should work Without Any Problem....Whatever for me everything seems fine....This Version Contains Latest APK of Greenify...!!
So Enjoy Happy Greenifying....!!!!!
This Is Strictly Magisk Module ...Never Try To Install It Through Recoveries...!
Download Link: https://drive.google.com/file/d/1oqSGwDQGO3GMLeMRvIMGAftK4_bhqIIl/view?usp=drivesdk
Sachinkerala said:
Hei whatsup folks....So Trying Custom Roms..Right...Most Of The Time You May Came across Problem in Installing "Greenify4Magisk" In Magisk as it Only Support Until SDK 27.So...i too faced same problem when trying to install Greenify as System app...and To Be frank This Zip Is Just Edited Version...all Credits Goes to Original Devs Who craeted It.So By Using This Zip You Will Be Able To Use
Greenify In Pie roms and Also as a system app...Just Import In Magisk Modules and reboot...It should work Without Any Problem....Whatever for me everything seems fine....This Version Contains Latest APK of Greenify...!!
So Enjoy Happy Greenifying....!!!!!
This Is Strictly Magisk Module ...Never Try To Install It Through Recoveries...!
Download Link: https://drive.google.com/file/d/1oqSGwDQGO3GMLeMRvIMGAftK4_bhqIIl/view?usp=drivesdk
Click to expand...
Click to collapse
Awesome! Thanks for the work
Update Is Up....!!
Greenify Module is Updated With Latest Version 4.7 Pro......!!!
https://drive.google.com/file/d/1--x319u5NoUHBQyCXrZQiTdK7yfYaKkW/view?usp=drivesdk
-Thanks
Sachinkerala said:
Update Is Up....!!
Greenify Module is Updated With Latest Version 4.7 Pro......!!!
https://drive.google.com/file/d/1--x319u5NoUHBQyCXrZQiTdK7yfYaKkW/view?usp=drivesdk
-Thanks
Click to expand...
Click to collapse
Thank you for your hard work!
Thanks for the app! It didn't worked, so I manually moved the app to System/priv-app through TWRP, mounted System and did that in File Manager, that worked.
Only problem I have is that after restart, all the Xposed/Donation features are getting unticked, really annoying.. I think I tried almost everything, but can't seem to make it work.
Anyone got a solution for this, please?
Got an S9 G960F running custom android 9 by Soldier9312 with TGP kernel selinux permissive.
Thanks in advance!
Hello !
I'm actually using Lineage 16.0 TREBLE on my Z2, it's pretty good, but...
Impossible to get Magisk working...
My bank apps (and others) detecting root...
I've hided Manager,
I've hided apps on magisk too...
I've installed the two modules on magisk (Magisk hide props config, safetypatch v3, and the petnoire safety patch) Note that I cannot use the last one, it install without any errors, but doesn't appears on modules installed after reboot... I don't know why.
And, impossible to get more,
Root still detected.
Please note that I have NOT installed Any Gapps, I don't wan't any google crap on my phone...
Have you any ideas / suggestions to help me ?
Many thanks !
NeedaVirus said:
Hello !
I'm actually using Lineage 16.0 TREBLE on my Z2, it's pretty good, but...
Impossible to get Magisk working...
My bank apps (and others) detecting root...
I've hided Manager,
I've hided apps on magisk too...
I've installed the two modules on magisk (Magisk hide props config, safetypatch v3, and the petnoire safety patch) Note that I cannot use the last one, it install without any errors, but doesn't appears on modules installed after reboot... I don't know why.
And, impossible to get more,
Root still detected.
Please note that I have NOT installed Any Gapps, I don't wan't any google crap on my phone...
Have you any ideas / suggestions to help me ?
Many thanks !
Click to expand...
Click to collapse
Hi, did you solve the problem? do I have the same problem?
Hi all,
I currently have Package Disabler Pro installed and it works well to stop all the bloatware running.
Has anyone tried this with the new update?
Thanks - Keith
Is not supported and (at least for my Sm-976V) the boot kernel is upped to 5 trapping me on 11 with the bloat unless rooted
It does work on the latest update, you just need to save the XML, uninstall, run tne OS update, reinstall and load the XML.
Working perfectly well here.