Develop Bugs

BlackView BV9600 Pro + LineageOS?

Hi! Could you please explain if this ROM will be compatible with my smartphone? I'm not sure, I don't found it on the list on LineageOS website.

Well, someone need to compile it for our bv9600 - i also would appreciate it, but i don't have thoose skills...

Also, lenovo vibe c2

i am not even not able to root my device (blackview bv9600 pro) i don't think that you will be able to have any lineage rom also...
have anyone success to root this device?

giannhs_n said:
i am not even not able to root my device (blackview bv9600 pro) i don't think that you will be able to have any lineage rom also...
have anyone success to root this device?
Click to expand...
Click to collapse
jup, runs root - magisk

AMDFenics said:
jup, runs root - magisk
Click to expand...
Click to collapse
can you explain how did you get root? or give me a guide, all the internet guides i tried failed!
thanks

giannhs_n said:
can you explain how did you get root? or give me a guide, all the internet guides i tried failed!
thanks
Click to expand...
Click to collapse
simply follow this guide -> LINK
- allow OEM unlock in the dev-settings (hit 5 times build number to see)
- allow usb debugging
- reboot to fastboot
- send "fastboot devices" command
- send "fastboot oem unlock" -> acknowledge
- send "fastboot flashing unlock" -> acknowledge
- flash the twrp image "fastboot flash recovery name_of_the_image.img"
- reboot into twrp by power of the device
- after that press vol+ up and power button (if i remember correct.. ) to get into twrp
- now u need a sd-card (micro) put no verity opt encrypt on it and magisk
- Backup all partitions u find.
- format data partition to get the size
- install magisk
- install no verity opt...
reboot
BV9600 should be rooted. Took me serveral times to get it working, because u need directly after "Flashing unlock command" to get the twrp stuff done.
Credits
The TWRP.img comes from www.unofficialtwrp.com
The encryption disabler comes from @Zackptg5 all credits to him. THANKS -> his site LINK
Enjoy

AMDFenics said:
simply follow this guide -> LINK
- allow OEM unlock in the dev-settings (hit 5 times build number to see)
- allow usb debugging
- reboot to fastboot
- send "fastboot devices" command
- send "fastboot oem unlock" -> acknowledge
- send "fastboot flashing unlock" -> acknowledge
- flash the twrp image "fastboot flash recovery name_of_the_image.img"
- reboot into twrp by power of the device
- after that press vol+ up and power button (if i remember correct.. ) to get into twrp
- now u need a sd-card (micro) put no verity opt encrypt on it and magisk
- Backup all partitions u find.
- format data partition to get the size
- install magisk
- install no verity opt...
reboot
BV9600 should be rooted. Took me serveral times to get it working, because u need directly after "Flashing unlock command" to get the twrp stuff done.
Credits
The TWRP.img comes from www.unofficialtwrp.com
The encryption disabler comes from @Zackptg5 all credits to him. THANKS -> his site LINK
Enjoy
Click to expand...
Click to collapse
thanks for the detailed information,
can you also tell me your frimewire version also because i am not available to boot on recovery!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

giannhs_n said:
thanks for the detailed information,
can you also tell me your frimewire version also because i am not available to boot on recovery!
View attachment 4705498
Click to expand...
Click to collapse
exact same version.
---------- Post added at 10:29 PM ---------- Previous post was at 10:27 PM ----------
First u need to go to fastboot mode, to unlock "OEM UNLOCK"
This is easy via adb
-> reboot fastboot
Did u install the correct driver? (ADB driver) is ur device listed?

i tried repacking it myself but with no luck so far, also tried various treble GSI, all booting on my BV9600Pro and basically working but mobile data and phone are broken so that's not an option for now

I don’t understand why unblock the bootloader at all if everything is installed on the MTK platform using the SP Flash Tool !?
Why these dances with adb and fastboot? if a everything is done much easier ...
You do not install the factory software using adb ? not ?? so why can't TWRP be installed and installed using the SP Flash Tool!? Why complicate things?

Root with sp Flash tool
Hi please Anyone could explain this procedure with Sp Flash Tool and post it?

serg2327 said:
I don’t understand why unblock the bootloader at all if everything is installed on the MTK platform using the SP Flash Tool !?
Why these dances with adb and fastboot? if a everything is done much easier ...
You do not install the factory software using adb ? not ?? so why can't TWRP be installed and installed using the SP Flash Tool!? Why complicate things?
Click to expand...
Click to collapse
Because the vendor (Blackview) locks the bootloader (like any other brand does) and does not allow installing any other recovery without it.!?

AMDFenics said:
Because the vendor (Blackview) locks the bootloader (like any other brand does) and does not allow installing any other recovery without it.!?
Click to expand...
Click to collapse
Is this a statement or a question? Sorry, I do not know English and I use a translator ..
II repeat once again, in order to install TWRP you do not need to unlock the bootloader!
it installs without problems using the SP Flash Tool
and this is not an assumption but a statement!
My first copy of the smartphone received TWRP. It was on my copy that all the first tests of TWRP and ROOT were conducted.

serg2327 said:
Is this a statement or a question? Sorry, I do not know English and I use a translator ..
II repeat once again, in order to install TWRP you do not need to unlock the bootloader!
it installs without problems using the SP Flash Tool
and this is not an assumption but a statement!
My first copy of the smartphone received TWRP. It was on my copy that all the first tests of TWRP and ROOT were conducted.
Click to expand...
Click to collapse
I'm glad to hear that it works that way to you. But that doesn't worked for me. So i wrote the way i took, to root. Let the others choose, wich way works for them. :fingers-crossed::good:

I am using another MTK device and SP FlashTool is great it lets you recover from any software brick. So I will advice people to use this method.
I am planning on buying bv9600 pro and having twrp ported and root is a good start to custom roms.
The touch driver issue on twrp should be easily solved with the good kernel module for the twrp. And official twrp support would be nice.
Subscribed to the thread will see where it goes.

hi guys, can you share a clean system twrp backup of bv9600? because my USB is damaged and i can not use sp flash tool to clean restore. thanks!

Hi, i try to root my bv9600 pro, but all i end up is on reboot the system restores to factory no TWRP or anything on it. I connected it to MTKdroidtools and it complains about a file /system/recovery-from-boot.p which restores recovery and obviously after it the system too.
Thanks for any help
edit: LOL nevermind, working fine now, don't know what was going wrong, in a last try just downloaded the latest stable magisk again. Thanks AMDFenics for the howto
Just one thing, can i get rid of this 5 sec. warning that the mobile is unlocked?

dark-wulf said:
Hi, i try to root my bv9600 pro, but all i end up is on reboot the system restores to factory no TWRP or anything on it. I connected it to MTKdroidtools and it complains about a file /system/recovery-from-boot.p which restores recovery and obviously after it the system too.
Thanks for any help
edit: LOL nevermind, working fine now, don't know what was going wrong, in a last try just downloaded the latest stable magisk again. Thanks AMDFenics for the howto
Just one thing, can i get rid of this 5 sec. warning that the mobile is unlocked?
Click to expand...
Click to collapse
Maybe there is a way, but i don't know him. It is a common way for many manufacturer, to say, "here u did something you are not supposed too"

https://www.mediafire.com/file/0j0bx6cb0cb58f5/BV9600Pro_30042019_full.zip/file
Latest Firmware (04.2019) Clean SP Flash tool Backup

adb/twrp issues....

Firstly, when plugging my 7t in to my windows 10 PC, I am asked to choose which mode to go in within usb preferences, as I did previously in order to achieve and ADB driver connection I chose file transfer.......
this didn't work for some reason, only when in MIDI did I get a confirmation with adb devices.....even though there is still no sign of adb interface in device manager.....
any ideas? I can get adb connection with MIDI but is this good enough to flash recoveries/boot images etc....?
I tried to flash twrp and I could successfully boot into twrp directly via fastboot but twrp couldn't seen any of my storage, despite having all security methods turned off...
all i want to do is gain root access but I am having no joy....
ever since android 10 rooting anything for me has been a pain in the ass......truly fed up....it shouldn't be this hard......
I also flashed a patched boot image in an attempt to gain root access but it all did was break my wifi........which i fixed by copying over the latest image and installing locally......
please HELP....

Everything about this issues is already said in this forum.

Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961

ontwykende said:
Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
Click to expand...
Click to collapse
sweet, ill check it out.....

ontwykende said:
Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
Click to expand...
Click to collapse
It would seem that TWRP is a no go, for awhile at least.....
anyone managed to gain root access by flashing a patched boot.img?

mediaman123 said:
It would seem that TWRP is a no go, for awhile at least.....
anyone managed to gain root access by flashing a patched boot.img?
Click to expand...
Click to collapse
Lots of people have. Just boot your version and use magisk to direct install and reboot then you have root

Josh McGrath said:
Lots of people have. Just boot your version and use magisk to direct install and reboot then you have root
Click to expand...
Click to collapse
Normally I would be able to carry out such tasks but because I now feel so fed up with it all could I trouble you to tell my step by step how that is done.....?
many thanks..

mediaman123 said:
Normally I would be able to carry out such tasks but because I now feel so fed up with it all could I trouble you to tell my step by step how that is done.....?
many thanks..
Click to expand...
Click to collapse
I made a tool to install the latest ADB, Fastboot and USB drivers for windows, its very easy to use, just double click the file to start the installation process
you can see it here:
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

fawazahmed0 said:
I made a tool to install the latest ADB, Fastboot and USB drivers for windows, its very easy to use, just double click the file to start the installation process
you can see it here:
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Screenshot:
Click to expand...
Click to collapse
I can operate that fine, its just how to obtain boot.img files etc, patch them and so on..

mediaman123 said:
I can operate that fine, its just how to obtain boot.img files etc, patch them and so on..
Click to expand...
Click to collapse
Oh, I thought, you are have issues with adb, and for root, you just have to flash magisk using twrp

fawazahmed0 said:
Oh, I thought, you are have issues with adb, and for root, you just have to flash magisk using twrp
Click to expand...
Click to collapse
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....

mediaman123 said:
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....
Click to expand...
Click to collapse
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access

fawazahmed0 said:
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access
Click to expand...
Click to collapse
thanks for this......want to try and avoid wiping if possible but if I really want root I will do it.....
what does the command fastboot -w do?

mediaman123 said:
thanks for this......want to try and avoid wiping if possible but if I really want root I will do it.....
what does the command fastboot -w do?
Click to expand...
Click to collapse
it wipe's the data

mediaman123 said:
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....
Click to expand...
Click to collapse
fawazahmed0 said:
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access
Click to expand...
Click to collapse
TWRP is not functional at the moment, so stay away from it.
The only way to root right now is to use the patch boot image method.

Lossyx said:
No don't do this.... This is not about encryption at all. It's about the major partitioning changes that has happened in Android 10. Wiping the system will just make everything worse.
Avoid using TWRP at all.
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Oh, I didn't know this phone was on Android 10, Thanks for letting me know.
TWRP doesn't support Android 10 yet.
You can see it here
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html
Actually there is a twrp compiled for this phone, but that doesn't work , you can see the messages in thread:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
The steps I told, was for Android 9 and earlier devices, I assumed, this is an old device.
@mediaman123, So please wait, until twrp starts supporting the Android 10.
And for rooting, I am not sure, whether magisk supports this new phone or not.
Maybe @Lossyx can help you on that.

https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
Sent from my OnePlus7TPro using XDA Labs

Lossyx said:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Seen this, however my device, the European version, is running on 10.0.6.....
The only boot images available with that post is the 10.0.3...
wouldn't feel comfortable using them.....
I would like to know how to extract the stock boot image from either the firmware file or the phone itself...

mediaman123 said:
Seen this, however my device, the European version, is running on 10.0.6.....
The only boot images available with that post is the 10.0.3...
wouldn't feel comfortable using them.....
I would like to know how to extract the stock boot image from either the firmware file or the phone itself...
Click to expand...
Click to collapse
You can go ahead and just fastboot boot them. If it works then just proceed, if it doesn't, just hold volume up+down and power button. (To boot into fastboot or restart phone)
Nothing will change in the system because it only boots a temporary image.
If your want to extract your own boot image you can use this tool.
https://github.com/cyxx/extract_android_ota_payload
Sent from my OnePlus7TPro using XDA Labs

Lossyx said:
You can go ahead and just fastboot boot them. If it works then just proceed, if it doesn't, just hold volume up+down and power button. (To boot into fastboot or restart phone)
Nothing will change in the system because it only boots a temporary image.
If your want to extract your own boot image you can use this tool.
https://github.com/cyxx/extract_android_ota_payload
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
So if it boots an older image successfully I can move it over to the phone to patch to then flash it or use the already patched one and flash that...?..

How to root?

Hi everyone
My phone model is xt2075-3,I want to root
Can I directly flash the latest magisk(20.4) to get root permission after unlocking BL?

I've succeeded in getting root.The steps are as follows
1.Download the twrp for your mobile phone,and magisk20.4.zip,magisk 7.5.1.apk
2.Visit Motorola official unlock website to unlock BL
3.You have 2 choice,A.boot on twrp one time;B.flash twrp;I choose A
4.Whatever your choose,in the twrp,install magisk zip,after done,reboot system
Enjoy root!

If you use the Magisk Manager to patch the boot image manually, and then flash that through fastboot - will that work also?
(My phone has yet to arrive so can't test this just yet...)

Update : i got the 8gb ram 128gb varient and i could boot into twrp from fastboot but i cannot flash replacing stock recovery nor i can see the internal or external memory due to decryption error
However, i basically unlocked boot loader and booted in fast boot then i flashed the patched boot.img ( installed magisk apk and added the stock boot.img inside the phone to patch it) then copy it back to pc and flashed it in fastboot mode and now i got root access
NOTE : if you happen to do something wrong you cannot use rescue and backup software to restore your phone to stock again ... flash stock boot.img in fastboot first so the software will recognize the phone back again

sniper9911 said:
Update : i got the 8gb ram 128gb varient and i could boot into twrp from fastboot but i cannot flash replacing stock recovery nor i can see the internal or external memory due to decryption error
However, i basically unlocked boot loader and booted in fast boot then i flashed the patched boot.img ( installed magisk apk and added the stock boot.img inside the phone to patch it) then copy it back to pc and flashed it in fastboot mode and now i got root access
NOTE : if you happen to do something wrong you cannot use rescue and backup software to restore your phone to stock again ... flash stock boot.img in fastboot first so the software will recognize the phone back again
Click to expand...
Click to collapse
where did you find the boot.img and the patched one?
Thanks

Mr.Krulez said:
where did you find the boot.img and the patched one?
Thanks
Click to expand...
Click to collapse
Get the full stock image by downloading rescue and smart assistant app from lenovo which supports moto phones ... Do login and get the fastboot rescue option while plugging your phone in the pc in fastboot mode .. then it will download it full firmware for your varient
Becareful that continue to flash the firmware will wipe your phone completely
After that get a copy of the boot.img file ... Copy it to the internal memory and install magisk manager apk from its official github site ... Now patch the boot.img you copied in your phone inside the magisk app then copy it back to your pc
Lear how to flash it from fastboot
Flash it
Done .. you are now rooted by patched boot.img with stock recovery !
Sent from my moto g 5G plus using Tapatalk
View attachment 5143479View attachment 5143477View attachment 5143481

Thank you for the answer but if I want to just root my phone I only need to flash magisk right? i don't need the patched boot.img?
sorry to bother you but the last phone I used supersu withouth flashing anything else than the recovery

Hi Guys,
my device is a/b device, bootloader unlocked, could you please kindly advise to flash twrp
what is the fastboot command, i use fastboot flash recovery twrp.img and i get a bootloop . the command fastboot boot twrp.img runs twrp onece and its fine, but how do i flash it please?
thanks and kind regards

emanuel said:
what is the fastboot command, i use fastboot flash recovery twrp.img and i get a bootloop . the command fastboot boot twrp.img runs twrp onece and its fine, but how do i flash it please?
Click to expand...
Click to collapse
I think the flash method fails because there is no partition called "recovery" - as an A/B device it looks like there are two:
Code:
nairo:/ $ ls -l /dev/block/by-name/ | grep recovery
lrwxrwxrwx 1 root root 16 1970-05-20 07:34 recovery_a -> /dev/block/sdd20
lrwxrwxrwx 1 root root 16 1970-05-20 07:34 recovery_b -> /dev/block/sdf20
if you have the Magisk zip file on the internal storage you can use the "fastboot boot twrp.img" method to flash it from there (for some reason TWRP can't see the SD card on my device)

Now for my question... my rooted (UK Retail) device has indicated that there is an OTA update:
I've tried using the method described here to restore the boot partition to stock so that it doesn't interfere with the process, but it fails (see attached images).
Does anyone know of a working method? I have downloaded the full (2+GB) update so am prepared to flash that (and restore everything else from backups) if necessary - but would rather not if it can be avoided...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

xth88312 said:
I've succeeded in getting root.The steps are as follows
1.Download the twrp for your mobile phone,and magisk20.4.zip,magisk 7.5.1.apk
2.Visit Motorola official unlock website to unlock BL
3.You have 2 choice,A.boot on twrp one time;B.flash twrp;I choose A
4.Whatever your choose,in the twrp,install magisk zip,after done,reboot system
Enjoy root!
Click to expand...
Click to collapse
Hi @xth88312 ,
can you give the link you used to download TWRP for Moto XT2075-3?

I unlocked my phone through the official Motorola site:
Unlocking the Bootloader | Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.
motorola-global-portal.custhelp.com
I downloaded the latest Magisk and MagiskManager in the same directory from
Releases · topjohnwu/Magisk
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
I downloaded the original firmware from https://mirrors.lolinet.com/ and extracted the boot.img in the same directory, then issued, through the ADB connection:
Code:
adb install ./MagiskManager-*.apk
adb push ./boot.img /sdcard/Download/
(Replace the star as needed)
I opened MagiskManager app (you need to be connected to the Internet) and in the Magisk card I tapped Install > "Select and Patch a File". I browsed for and selected /sdcard/Download/boot.img and tapped "Let's go". A patched image /sdcard/Download/magisk_patched_*.img is created. Then, through the ADB connection, I issued:
Code:
adb pull /sdcard/Download/magisk_patched_*.img
adb reboot bootloader
fastboot devices
fastboot flash boot magisk_patched_*.img
fastboot reboot
At reboot, the phone was rooted.

boringtech said:
Hi @xth88312 ,
can you give the link you used to download TWRP for Moto XT2075-3?
Click to expand...
Click to collapse
[RECOVERY][UNOFFICIAL] TWRP 3.5.0.0
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
thats the link for twrp for moto g 5g plus..
use at own risk as i havent tried it myself so im not responsible for bricked devices etc...FLASH AT OWN RISK....

Mr.Krulez said:
Thank you for the answer but if I want to just root my phone I only need to flash magisk right? i don't need the patched boot.img?
sorry to bother you but the last phone I used supersu withouth flashing anything else than the recovery
Click to expand...
Click to collapse
Mr.Krulez said:
Thank you for the answer but if I want to just root my phone I only need to flash magisk right? i don't need the patched boot.img?
sorry to bother you but the last phone I used supersu withouth flashing anything else than the recovery
Click to expand...
Click to collapse
youll have to patch bo
Mr.Krulez said:
Thank you for the answer but if I want to just root my phone I only need to flash magisk right? i don't need the patched boot.img?
sorry to bother you but the last phone I used supersu withouth flashing anything else than the recovery
Click to expand...
Click to collapse
you need to
Mr.Krulez said:
Thank you for the answer but if I want to just root my phone I only need to flash magisk right? i don't need the patched boot.img?
sorry to bother you but the last phone I used supersu withouth flashing anything else than the recovery
Click to expand...
Click to collapse
youll need the patched boot.img to gain root, thats how ive had to root all my moto phones ive had, never been able to just flash supersu etc, someone will jump in if im wrong but as far as i know you need to patch the boot.img....
Remember everything you do is at your own risk i take no responsibility for.what you do with your device

How To Guide [Oneplus 9 Pro] Extract partitions on unrooted or locked phone.

This manual will be useful for phones with Oxygen firmware, because very often they are get incremental updates and many users cannot install update with root, cannot find a stock boot, etc.
Also for those who want to unlock the bootloader at the first time and can save the persist patririon.
What are we need:
* MSMTools
* working fastboot
Let's start:
* reboot your phone in fastboot mode
* enter in cmd console
Code:
fastboot getvar current-slot
in that step we determine the current slot to extract the correct partitions
* start MSMTool program
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* press F8 and you will see this windows
* choose right partitions (if your current slot are b, then choose for example boot_b, etc)
* in Password: field enter oneplus and press Ok
* if you make all right you will see that new button
* press on it, connect your phone and wait.
* selected images are saved on C:\
* profit
P.S. sorry for my english

Are you able to expand this tutorial on how to change partitions or on how to "update" msm so it uses a later version of OOS to unbrick the device?
The actual msm tool for OP9 Pro would install OOS11. But can it be changed to flash OOS12?

this tutorial only for how to extract partitions. android 11, 12, coloros, no matter.
for others can't help you

This part was empty for me:
Command "Fastboot devices" was working..

The tutorial in the first post is somewhat misleading. Fastboot is needed to flash back the partitions. In order for the partitions to be secured with the MSM tool, the phone must be in the EDL mode.
1. that means shutdown the phone
2. Start the MSM tool and press F8 on the keyboard
3. Press both volume keys at the same time and then connect the USB cable
4. Now the tool would have to recognize your phone and the partitions can be selected
The rest is well described in the first post.

I have a question, Im new in xda and I want to backup modest 1/2 and persist. In this post you can do it in MSM but I cannot see modemst1 or 2 in the partitions checkbox. They have another name? Or I cannot backup those partitions via MSM?

Cris092 said:
I have a question, Im new in xda and I want to backup modest 1/2 and persist. In this post you can do it in MSM but I cannot see modemst1 or 2 in the partitions checkbox. They have another name? Or I cannot backup those partitions via MSM?
Click to expand...
Click to collapse
Try Partitions Backup in the play store

TheGhost1951 said:
Try Partitions Backup in the play store
Click to expand...
Click to collapse
Do I need root or unlocked bootloader? Im unroot and with locked bootloader, that's why Im trying to do it like this post

Cris092 said:
Do I need root or unlocked bootloader? Im unroot and with locked bootloader, that's why Im trying to do it like this post
Click to expand...
Click to collapse
You don't need root to backup, but you do to restore the backup.

This is what my phone says when I open partitions backup
So that's why I want to do it via MSM like this post, but I don't know what partitions do I have to check in MSM. I can see persist but modest 1/2 I cant

Cris092 said:
This is what my phone says when I open partitions backupView attachment 5830269
So that's why I want to do it via MSM like this post, but I don't know what partitions do I have to check in MSM. I can see persist but modest 1/2 I cant
Click to expand...
Click to collapse
Sorry for misleading you, other than that not sure how to get the images you want.

Ok so I made backups using this method like 2 days ago, if we ever need to restore them, how do we do it?

immortalwon said:
Ok so I made backups using this method like 2 days ago, if we ever need to restore them, how do we do it?
Click to expand...
Click to collapse
With partitions backup?

TheGhost1951 said:
With partitions backup?
Click to expand...
Click to collapse
No, using the MSM tool to do a flash readback, which saves most of the firmware to the C: drive

If your phone is already on, you can also use the following command in command prompt to use ADB to reboot into EDL.
adb reboot edl

Still waiting for an answer from OP or anyone else: After we have made a flash read-back via MSM, how are these firmware files restored????

immortalwon said:
Still waiting for an answer from OP or anyone else: After we have made a flash read-back via MSM, how are these firmware files restored????
Click to expand...
Click to collapse
Flashed via Fastboot. For example if you extract boot.img from read-back and you want to restore the boot.img. Reboot your device into Fastboot and enter the following command in command prompt on your computer:
fastboot flash boot boot.img.
Depending on what you are flashing, you need to change the command accordingly. e.g vendor_boot.img
fastboot flash vendor_boot vendor_boot.img

Question root Xiaomi 11T Official ??

I want an official way to root the device and change the official ROM

strayh_ said:
I want an official way to root the device and change the official ROM
Click to expand...
Click to collapse
Welcome to XDA,
I want the same!
Maybe some dev around!

Root is available: Follow this thread
Unofficial twrp 3.6.0 for Xiaomi 11T (Agate)
Twrp 3.6.0 Root Xiaomi 11T (Agate): unofficial build of twrp 3.6.0 have Now been available for the Xiaomi 11T user Who own Xiaomi 11T can Root it by following the below Instructions. to Install twrp Recovery on Xiaomi 11T first You need to...
forum.xda-developers.com

Kiwironic said:
Root is available: Follow this thread
Unofficial twrp 3.6.0 for Xiaomi 11T (Agate)
Twrp 3.6.0 Root Xiaomi 11T (Agate): unofficial build of twrp 3.6.0 have Now been available for the Xiaomi 11T user Who own Xiaomi 11T can Root it by following the below Instructions. to Install twrp Recovery on Xiaomi 11T first You need to...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried that a year ago but because of skill issue I wasn't able to fix my device when it bricked so we went to the carrier we bought it at and we said that it happened during an OTA update

If you need help rooting it or unbricking, let me know

Kiwironic said:
If you need help rooting it or unbricking, let me know
Click to expand...
Click to collapse
I have MIUI 14 mi pilot build no twrp supports this fw
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You don't need TWRP for root, just get unlocked bootloader and get the boot.img file from your rom and use the Magisk app to patch it then flash it with fastboot
Code:
Fastboot.exe flash boot magicbootimg.img

Same device and same rom, rooted already

Kiwironic said:
Same device and same rom, rooted already
Click to expand...
Click to collapse
Nice

Kiwironic said:
Same device and same rom, rooted already
Click to expand...
Click to collapse
Brother i used payload dumper but i can't see boot.img do i need fastboot Rom?

Stephanizgo said:
Brother i used payload dumper but i can't see boot.img do i need fastboot Rom?
Click to expand...
Click to collapse
Download the Full ROM (Fastboot) which is bigger and you can find the "boot.img" easier.
https://xiaomifirmwareupdater.com/miui/

I have downloaded the ROM from https://c.mi.com
Official Xiaomi Rom download site but the fastboot logo changed and I no longer have the bunny on fastboot

Send me a screen shot of your about screen and I will send you a modified boot.img but you can do it yourself from the link I sent you. if you look at their download links they are all from mi servers.

https://bigota.d.miui.com/V14.0.3.0.TKWMIXM/agate_global_images_V14.0.3.0.TKWMIXM_20230105.0000.00_13.0_global_576aee87ab.tgz

Stephanizgo said:
View attachment 5865685
Click to expand...
Click to collapse
Hello sir , please Can you make a full video tutorial on how to root the device ?

0xHelium said:
Hello sir , please Can you make a full video tutorial on how to root the device ?
Click to expand...
Click to collapse
First you need to unlock the bootloader

Then follow these steps:
1 - Download the Fastboot ROM file for your device
2 - Extract the boot.img file from the ROM file, then copy it to your device's storage
3- Download the Majesk app and install it, then flash the boot.img file from inside the Majesk, you will have a new file named Majesk_patch.img in your downloads folder, copy it to your computer
4 - Then download the ADB platform and open it and open the command prompt from within the folder "Make sure to copy the file that you flashed into Magisk from copying it into the folder"
5 - Put your phone into fastboot mode by pressing the power key and volume down, then connect it to the computer, and type the following command at the command prompt:
fastboot flash boot boot.img " Here is the file that I copied inside the adb folder after changing its name to boot.img"
Then type the following command to restart the phone:
fastboot reboot
Congratulations, your phone has been successfully rooted
*I apologize if my writing is bad because I use Google Translate because I am not good at English*

0xHelium said:
Hello sir , please Can you make a full video tutorial on how to root the device ?
Click to expand...
Click to collapse
Once my brother returns my S10 I will probably

strayh_ said:
Then follow these steps:
1 - Download the Fastboot ROM file for your device
2 - Extract the boot.img file from the ROM file, then copy it to your device's storage
3- Download the Majesk app and install it, then flash the boot.img file from inside the Majesk, you will have a new file named Majesk_patch.img in your downloads folder, copy it to your computer
4 - Then download the ADB platform and open it and open the command prompt from within the folder "Make sure to copy the file that you flashed into Magisk from copying it into the folder"
5 - Put your phone into fastboot mode by pressing the power key and volume down, then connect it to the computer, and type the following command at the command prompt:
fastboot flash boot boot.img " Here is the file that I copied inside the adb folder after changing its name to boot.img"
Then type the following command to restart the phone:
fastboot reboot
Congratulations, your phone has been successfully rooted
*I apologize if my writing is bad because I use Google Translate because I am not good at English*
Click to expand...
Click to collapse
thanks, i combined this with an old thread and my phone is rooted