Develop Bugs

[Q] Samsung Galaxy S III USB Lockout

My AT&T Samsung Galaxy S III suddenly no longer works with usb. It can charge with the connection, but it does not show up as any kind of device. No MTP, no PTP, no usb debugging, no anything!
I tried:
- Factory resetting
- Plugging it into a different computer
- Switching to a different ROM
- I even tried to restore to stock firmware, but Odin couldn't see it.
No computer can notice my phone. It doesn't even notify me that it is unrecognized. The usb on my phone is locked out from any connection other than charging.
I use the phone for Android development and I use Eclipse ADT to compile my apps.
Is there any other solution I haven't tried?

jperry73 said:
Try a different cable, preferably an OEM one. Use a USB slot on the back.
Click to expand...
Click to collapse
Used the cable that came with my phone on different USB ports. Didn't work.

jperry73 said:
Uninstall Kies
Install these drivers:
Reboot
Click to expand...
Click to collapse
Already had the drivers installed. Reinstalled, rebooted, still doesn't work.

Here are a couple of other things to check. This menu can be achieved by using dialer code *#7284# on a Tw based rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then choose Qualcomm usb settings to check this

jperry73 said:
This was Windows 8 and solved by:
Uninstalling the Samsung Drivers
Running CCleaner
Rebooting
Hooking up the phone in each connection type: D/L Mode, MTP, and Debugging
Windows Update loaded the drivers properly
Click to expand...
Click to collapse
Don't forget pulling out the battery from my phone and going into download mode without the battery. Thanks a lot for your help!

The true fix for this annoying issue is to reboot the phone into download mode. Then hold the power and home buttons down for a few seconds to force a power down. When the phone is off, power it back on like normal, and you can then connect to usb again. This is a pain but it works EVERYTIME, guaranteed.
Sent from my Nexus 7 using xda premium

jperry73 said:
true fix is Windows 7
Click to expand...
Click to collapse
No. I use Windows 7 and this still happens all the time.
Sent from my Nexus 7 using xda premium

Windows doesn't recognize device plugged into usb

I flashed a custom rom wicked s5 xperience to my phone... It works awesome. Problem is now when I plug into usb it will charge but says the last device plugged into usb has malfunctioned and is not recognized. I tried to uninstall drivers and re install but no go. Any ideas on a fix?

aschubart said:
I flashed a custom rom wicked s5 xperience to my phone... It works awesome. Problem is now when I plug into usb it will charge but says the last device plugged into usb has malfunctioned and is not recognized. I tried to uninstall drivers and re install but no go. Any ideas on a fix?
Click to expand...
Click to collapse
If you have fast charge enabled in KTweaker you have to turn it off to connect to PC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Fast charge is disabled in ktweaker.

aschubart said:
Fast charge is disabled in ktweaker.
Click to expand...
Click to collapse
The cable may be damaged, have you tried a different one? Different port on the PC? Rebooting both devices?

I have tried two other cords and multiple reboots. Even tried another vista desktop.

aschubart said:
I have tried two other cords and multiple reboots. Even tried another vista desktop.
Click to expand...
Click to collapse
Tried going back to stock to see if it's a hardware issue?

bilgerryan said:
Tried going back to stock to see if it's a hardware issue?
Click to expand...
Click to collapse
Ya... but my original rom got erased so I downloaded a rooted stock rom nd8. I could not find stock oh1 rom. It still did not connect
usb. Would the boot version make any difference?

That would mean the USB connection is fried. No, that wouldn't make a difference.

bilgerryan said:
That would mean the USB connection is fried. No, that wouldn't make a difference.
Click to expand...
Click to collapse
any way to
fix it?

aschubart said:
any way to
fix it?
Click to expand...
Click to collapse
Unfortunately not without replacing the port. Sometimes if you jiggle the cord you can get it to connect.... My S2 I have to prop something under the cord to get it to charge and connect via USB. Sometimes the port is just loose.

lenovo vibe p1 bricked while trying to flash lollipop via qpst .. pls help

i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help

UP

mohamed_ragab09 said:
UP
Click to expand...
Click to collapse
Press volume up and then connect to pc.

Starchm said:
Press volume up and then connect to pc.
Click to expand...
Click to collapse
i tried but the phone is not detected and i get a message that the usb not recognized or malfunctioned

mohamed_ragab09 said:
i tried but the phone is not detected and i get a message that the usb not recognized or malfunctioned
Click to expand...
Click to collapse
Do u see so much drives in windows? Anyway u cant brick the phone fully...

Starchm said:
Do u see so much drives in windows? Anyway u cant brick the phone fully...
Click to expand...
Click to collapse
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?

mohamed_ragab09 said:
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
Click to expand...
Click to collapse
Flash the rom on his pc probably? Or disable win10 driver signature ****

he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help

my redmi note8 pro is bricked. NEED A HELP PLEASE

After these actions, my phone became a brick. I need help, what should I do? I tried to flash the phone through SP Flash, but it gives me an error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

harturicko said:
After these actions, my phone became a brick. I need help, what should I do? I tried to flash the phone through SP Flash, but it gives me an error
View attachment 5745107
Click to expand...
Click to collapse
Keep phone connected (dont change USB port). Open bypass again. Hold Power+ Vol up until it show Protection disable. Then press Download on SP flash tool. Redo 2-3 times.

Kirasu2080 said:
Keep phone connected (dont change USB port). Open bypass again. Hold Power+ Vol up until it show Protection disable. Then press Download on SP flash tool. Redo 2-3 times.
Click to expand...
Click to collapse
Yes, I already managed to fix it and installed the firmware. But never got around to installing TWRP. After I install TWRP on the phone, I start a cycle of reboots and nothing else, and so I've reflashed and tried differently every time, but still can't get TWRP installed. Maybe you know how to solve this problem?

harturicko said:
Yes, I already managed to fix it and installed the firmware. But never got around to installing TWRP. After I install TWRP on the phone, I start a cycle of reboots and nothing else, and so I've reflashed and tried differently every time, but still can't get TWRP installed. Maybe you know how to solve this problem?
Click to expand...
Click to collapse
Your current Miui version?

Kirasu2080 said:
Your current Miui version?
Click to expand...
Click to collapse
I put the firmware 11 miui and android version 9

Kirasu2080 said:
Your current Miui version?
Click to expand...
Click to collapse
oh sorry my android 10v

harturicko said:
oh sorry my android 10v
Click to expand...
Click to collapse
Type this on Google: brp 3.5.2 v2.7 pling
And download exactly that version.
This TWRP is for Miui 12.0.x and custom rom based on that.

Touchscreen is not working on my Samsung galaxy s20 phone and I want to retrieve the data which havent been backed up

Few days ago while I was using my phone touchscreen suddenly stopped responding. Not whole touchscreen, approximately 15% is still working. Problem is I cant enter my phone and I was on airplane mode when it happened so I am unable to use samsung find my phone to enter it. Is there any way I can enter the phone without erasing my data, or just download photos and music I have on it? Usb debugging is not turned on.

use mouse or keyboard and enable adb over wifi. then use scrcpy.
https://www.xda-developers.com/scrcpy-control-android-on-pc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

aIecxs said:
use mouse or keyboard and enable adb over wifi. then use scrcpy.
https://www.xda-developers.com/scrcpy-control-android-on-pc
Click to expand...
Click to collapse
How do I enable adb? And also, will this require turning on usb debugging on my phone?

read again.

aIecxs said:
read again.
Click to expand...
Click to collapse
I tried to follow instructions from the links you have sent me and they say that I have to allow usb debugging on my phone, which I am unable to do.

aIecxs said:
use mouse or keyboard and enable adb over wifi.
Click to expand...
Click to collapse
https://developer.android.com/studio/command-line/adb#wireless

aIecxs said:
https://developer.android.com/studio/command-line/adb#wireless
Click to expand...
Click to collapse
This asks for me being connected to wifi on my phone, which I am not and also finding my phones ip adress which I cant because I dont have acces to it

that's why you should use mouse or keyboard​

aIecxs said:
that's why you should use mouse or keyboard​
Click to expand...
Click to collapse
Yes but me using mouse (according to the links you sent me) requires me allowing usb debugging on my phone which i can't do because I cant enter it..

no, using mouse or keyboard does not require usb-debugging (or any touch input) at all. it is connected via usb.
However, you can use mouse or keyboard to enable usb-debugging (aka adb) and run scrcpy over adb over wifi, then finally connect usb cable to PC for file copying.