Develop Bugs

Samsung Galaxy J6+ flashing crash - Boot loop endlessly

Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?

Bro, its just discharged when you flashed it

Help Please
User said:
Bro, its just discharged when you flashed it
Click to expand...
Click to collapse
I am getting same issue but each time its on charge it reboots and I can see the screen getting laggier ! And its 3 hour in charge and It still persisits. So should I charge it overnight while its still in boot loop?
---------- Post added at 06:40 PM ---------- Previous post was at 06:35 PM ----------
iddik said:
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Click to expand...
Click to collapse
Did you fix the issue? please Help me if you did. I am getting same issue right now on my moms fone same brand j610f please do help.

Hello, I got the same problem. This happen because the battery is empty and the only way to charge again is open the phone and extract the battery to charged it with a external power supply

I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you

iddik said:
Hello,
I have a problem with my phone : Samsung J6+ (SM-J610FN/DS)
I have crached a flashing Rom with Odin and I'm sure it is because of that my phone can't start by pressing the power button.
Now my phone has the message : An error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software ...
The thing is that it is rebooting and looping without end every 2 seconds on that green screen with that message ...
Only thing I can do is, with the USB cable connected, when the green screen is up, I can push VOL down + VOL up and I can go in download mode.... Then I can push on VOL up but right after the phone reboot in loop again and again ...
Another thing is that without USB cable connected I can't start the phone.
What can I do ?
First thing, I can't start my phone if it's not connected with the USB cable.
Second thing, when I connect my phone with the USB cable, it starts automaticaly even if I didn't push the power button and it's looping and blinking and rebooting endlessly.
Also the phone don't seems to know how charging himself when USB cable connected.
Is it a Bricked samsung phone ?
If it is, how unbrick it ?
Click to expand...
Click to collapse
Have you got the issue fixed on you phone?

Since you can reach download mode - why not doing a clean flash with the correct firmware?

Cannot boot into download mode

Hi everybody, yesterday I was playing with my old Galaxy A50 trying to install a custom rom unsuccessfully.
I repeated the procedure three times installing TWRP and then Havoc OS but every time I tried to reboot from TWRP to OS I was stuck at the warning screen saying that the phone bootloader was unlocked and booting into download mode to reflash TWRP was blocked as it showed "only official binaries can be installed" (yes I installed Samsung disabler but still).
Still I was able to get the phone into download mode and reinstall the stock firmware as it seemed to be the only way to install and boot TWRP.
But at 4th time repeating the process I got frustrated, shut down the computer and left the phone on the warning screen still connected to computer usb cable.
Then I got back and noticed the phone was off as the battery died.
Indeed the battery died, so I put the phone in charging and after it reached 100% I tried to boot into download mode again to reflash stock firmware.
But here's the strange thing, I cannot boot into download mode anymore as pressing vol up+vol down while connecting usb cable, shows the lightning charge logo for 5 secs and then reboots infinitely with the same pattern.
If I force reboot by pressing vol down+power it shows the Samsung logo with the warning below it, then skips to another screen with another warning suggesting to press power button to continue (which does nothing) and after a while reboots to samsung logo.
So it doesn't seem it is bricked, it looks more like a battery controller fault, so I tried to detach the battery flex from the board, hoping it would reset the controller but it's still the same.
Also I tried with the flex detached and still no download mode is possible.
Was the download mode somehow erased? (if it's even possible considering it's the motherboard firmware)
If you need photos, videos or even a call on zoom, Skype, webex I would be glad to show you

same i got the same problem i can't find nothing for this when i press volume up and down and put the otg cable its simply charges but it gets stuck on the logo image there's no way to fix this but the only way is to open the phone,change the emmc and put one from samsung,close the phone flash a custom rom and you are done.

If you can enter recovery, do it. As soon as your phone gets into it, select the power off variant and then try to enter the download mode.
It seems like you did not unlock the bootloader, did you?

The bootloader Is unlocked i can't enter in the recovery because the phone locks on charging logo and its fully charged but when i try without charger It doesn't start.

Samsung S20+ Magisk uninstall bootloop.

I followed this guide to get my S20+ rooted: https://forum.xda-developers.com/t/...root-s20-series-and-upgrade-firmware.4079353/
I wanted to return my phone to it's original state so I tried uninstalling Magisk through the app but am now stuck in a bootloop where I can't seem to enter recovery or download mode.
The screen pops up and shows the logo, followed by the bootloader unlocked warning, back to the logo, and then restarts this process.
I can't seem to turn it off either. Have to wait for it to be 0%, but once I connect it to a charger, it automatically turns on again.
Can anyone help me solve this problem?

Recovery mode: volume up button and plug it into PC via cable, press power
Download mode: both volume buttons and plug it into PC via cable, press power
both modes only work if you have a cable connected

Stuck at bootloader unlocked warning

I have TWRP and LineageOS with Magisk installed on my A50. Normally, when my phone boots, I get the following sequence:
1. Phone vibrates.
2. Samsung Logo appears for a very short time, with bootloader unlocked warning at the bottom.
3. A screen showing a bootloader unlock warning at the top and "PRESS POWER KEY TO CONTINUE" appears.
4. After a while or if you press the power key, an additional unofficial software warning appears in red letters at the bottom.
5. After some time the phone continues to boot normally.
My problem is that after the latest reboot ("reboot into recovery" via power menu), it gets stuck at step 4 and won't continue to boot, neither recovery nor system, even if I wait for tens of minutes.
What I've tried:
-reboot with volume +/-/poweroff
-reboot with volume volume -/poweroff
-all of the following with and without USB connected to PC:
-power/volume +/- at boot, both starting after logo screen as well as starting before logo screen, as well as releasing power at logo screen
-power/volume + at boot, both starting after logo screen as well as starting before logo screen, as well as releasing power at logo screen
-power/volume - at boot, both starting after logo screen as well as starting before logo screen, as well as releasing power at logo screen
-volume + at boot, both starting after logo screen as well as starting before logo screen
-volume - at boot, both starting after logo screen as well as starting before logo screen
-volume +/- at boot, both starting after logo screen as well as starting before logo screen
None of these helped. I just get the normal sequence 1-4 and then stuck every damn time. Can't get into recovery or download mode. Can't even power off, obviously.
Is my phone gone for good?

same **** here. for me i cant charge the battery too. but before that with about the same problems i got it to work again for a few days.
now hangs on step 4

wollert60 said:
same **** here. for me i cant charge the battery too. but before that with about the same problems i got it to work again for a few days.
now hangs on step 4
Click to expand...
Click to collapse
With some help I managed to get into download mode, and from there reflash stock rom with ODIN.
Basically, you need to reboot the phone with power/vol+/vol- and as soon as the screen goes black, you release power but keep pressing the volume buttons, and also immediately connect the USB cable with the PC. Timing is key.

otterwise said:
With some help I managed to get into download mode, and from there reflash stock rom with ODIN.
Basically, you need to reboot the phone with power/vol+/vol- and as soon as the screen goes black, you release power but keep pressing the volume buttons, and also immediately connect the USB cable with the PC. Timing is key.
Click to expand...
Click to collapse
thats rng af. I also accidentally managed to flash another rom over it. it starts and could be set up again. but this is the second time why I had to do the whole thing

otterwise said:
With some help I managed to get into download mode, and from there reflash stock rom with ODIN.
Basically, you need to reboot the phone with power/vol+/vol- and as soon as the screen goes black, you release power but keep pressing the volume buttons, and also immediately connect the USB cable with the PC. Timing is key.
Click to expand...
Click to collapse
bro, you helped me alot, i'm stucked at this screen maybe 2 hours I didnt know what to do.
Btw, I've it just in 1 time =))

I got a way easier Method which has saved me several times
Is something i came up myself
Il be as precise as i can be so everyone understands!
1.Plug the phone to the wall (Your charger to the outlet)
2. Hold Power And Volume - (Volume down) until the phone shows the second charging animation (Which is the one after the first image of the phone charging [A circle with the lightning icon in the middle], this second screen shows a charging animation and the percentage of the battery) This indicates that the phone is fully Turned Off
3. Unplug your phone and the charger off the wall and bring it to your computer
4. Plug your cable to your Computer then back on your phone Hold Volume + and Volume - (Volume up and Volume Down) and plug your phone to your computer WHILE HOLDING BOTH VOLUME BUTTONS.
This little trick will put your phone in download mode so you can restore your device using Odin OR Flash Twrp with Odin and boot to right into Twrp (There is a way to do it without turning the phone on and having to go back to step 1, Follow this Tutorial to do it
(
)
I Hope this helps you all
And Happy Flashing!

A70 stuck in samsung logo and declines port.

I rooted my Galaxy a70 using vbmeta,Twrp and magisk. All was going well. Suddenly my phone turned off and when I press power button its shows download mode .so I tried odin to flash but every time it fails.After many tries I realise that its port are not connecting to pc ,its only charging and my pc also can't detect my phone ..now when I connect the phone to pc its shows samsung logo.its also not showing the battery percentage .
(My pc is ok it have all driver installed and odin works)
Is there anyway to solve.
Thanks.

reboot pc just to be sure.
connect phone and pc
on the phone in download mode screen, hold vol down and power till screen goes blank immediately let go and hold vol up and down to boot back into download mode. the letting go when screen goes blank to holding up and down needs to be fast.
now once back in download mode, is odin showing port number?
also make sure your using odin 3.13.3
if still no go, try uninstalling samsung usb drivers, reboot then reinstall and try the process again.

When I put cable in my phone it directly shows the logo....
Its not showing the battery

I tested my another Samsung phone to be sure that my softwares are working. And it's working but when I put my A70 in. Nothing happened