Samsung galaxy s20 entering recovery - Samsung Galaxy S20 / S20+ / S20 Ultra Questions &

Good morning. I have to wipe (soft reset) but am not able to start in recovery mode. I tried turn off and restart with volume down and bixby both pressed up to logo appears but nothing to do.
Can anyone help me? thanks

answer: the cable must be connected to a pc and the key are vol+ and bixby buttons. hello

Related

F400S Dead end

Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
nasser789 said:
Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
Click to expand...
Click to collapse
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to http://www.android.gs/enter-recovery-mode-lg-g3/) mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
gee2012 said:
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to [ mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
Click to expand...
Click to collapse
thank you very much for your response.
i tried it same problem stuck in booting the phone lg logo. i tried to put in the download mode the phone stuck on lg logo.
the only response from the phone is when i press the whole buttons and it take me to a koren menu showing imei.

Sumsung galaxy s6 edge+ forget password in ultra power saving mode

Hi, i forgot the password and its unable to open and phone in ultra power saving mode, i tried to switch off by holding the power on/off button and volume keys, now showing it is in safe mode, please help me.
Power off your device. Long press the home, power, and volume up keys to enter recovery mode. You can perform a factory reset from here, but if you had a google account then you'll need to have access to that so you can reactivate your phone after the reset (unless you had OEM unlock on in the developer settings).

What is the secret gesture to enter into Download/Recovery mode?

Hello,
Can someone give me the EXACT procedure to enter into Download and Recovery mode please?
If my tab (SM-T830) is switched off, and I switch it on by pressing Vol down + Power and I keep pressing both buttons, it will boot until the first splash screen (Samsung Galaxy Tab S4 Powered by Android) then after this screen, it will reboot..
If I release buttons during this splash screen, it boots up normally
I already succeeded to enter to download or recovery modes before but I have no idea how. I guess I must release 1 or 2 button at the point but when ?
Thanks
Hello,
Hopefully this will be helpful, the following procedure worked for me:
make sure the tab is off
plug the USB cable in your tab (but not in your computer)
hold down both volume buttons together
plug the USB cable in your computer
then the tab start (you may release the buttons) with a menu allowing you to choose (Vol +/-) between download mode and reboot.
Qrm said:
Hello,
Hopefully this will be helpful, the following procedure worked for me:
make sure the tab is off
plug the USB cable in your tab (but not in your computer)
hold down both volume buttons together
plug the USB cable in your computer
then the tab start (you may release the buttons) with a menu allowing you to choose (Vol +/-) between download mode and reboot.
Click to expand...
Click to collapse
It works perfectly, thank! That's a weird way to go to DL mode but it works!
And once I'm already in DL (and flashed a tar with Odin), do you know how I can restart directly to Recovery mode without rebooting to system?
Kholargol said:
Hello,
Can someone give me the EXACT procedure to enter into Download and Recovery mode please?
If my tab (SM-T830) is switched off, and I switch it on by pressing Vol down + Power and I keep pressing both buttons, it will boot until the first splash screen (Samsung Galaxy Tab S4 Powered by Android) then after this screen, it will reboot..
If I release buttons during this splash screen, it boots up normally
I already succeeded to enter to download or recovery modes before but I have no idea how. I guess I must release 1 or 2 button at the point but when ?
Thanks
Click to expand...
Click to collapse
This is really late, but go to recovery and select download mode.
Power off
Hold down all three buttons (power, vol down, vol up)
Once it vibrates let go of power and vol down, continue to hold vol up. Never fails.
minionhunter said:
This is really late, but go to recovery and select download mode.
Power off
Hold down all three buttons (power, vol down, vol up)
Once it vibrates let go of power and vol down, continue to hold vol up. Never fails.
Click to expand...
Click to collapse
Did this several times exactly the same way it's described and it fails every single time. Other way worked perfectly and easily on my first try.

Help with galaxy j6

Hey, i have j6 and i forgot the screen code, so i tried to flash a stoxk rom but i cant enter downloading mode, i tried to plug the phone to computer and hold all buttons but still nothing, i can enter recovrey mode, of curse the easy way its to do wipe data but i cant because its blocked by mdm and again i cant enter my phone. There is some way to get downloading mode ?
Power off your phone. Hold vol up and power button . This will bring you to recovery mode. Then there you'll see the option to reboot to bootloader

S20 Ultra att can't access recovery or download mode

I've got att S20 ultra and can't access either download mode or the recovery mode, no matter what I do.
I forgot the pin code and can't reset it.
Tried vol up + power, but phone just boots up.
Pushed vol up and vol down with usb cable, but still same,
Any ideas?
Anyone?
Easiest option if forgot yr pin is to go to Google find my device on a computer login with your Google password registered to that locked device and erase the phone from there. Odd u cannot get into recovery maybe att locked that feature?
I have no problems with entering recovery using vol up + power.
It's easiest to do it after a restart where you press the buttons immediately after the restart has started and keep pressing until recovery shows up.

Categories

Resources