Hi every one. I hope you will wan help me.
I bricked my sm-t830 by shut it off while app was transfered to sd card (i know i'm totaly dumb for doing it) and know my tab is stuck in a bootloop.
I already try to flash it whith several official rom (AP, BL, CSC) with odin 3 but non of these try was a success. One of the dificulties is that i don't know whit csc my tab is (tha tab was buy in Belgium). I have very few experience on flashing devices since my last time was on a HTC Hero years ago. So if anyone couldhelp me it will be greatly appreciate.
I have certenly not provide enough info so ask me what you need and i'll answer the best i can.
Thanks a lot fon any help.
Someone can help me please
Nobody can help me?
Please?
No help, but the same problem.
Problem:
Starts with logo, then comes the Samsung lettering, and after a long time everything starts again from the beginning.
The tab was unfortunately not unlocked at all, i.e. not even USB debugging was enabled
Attempted solutions:
Booted into Recovery Mode, Cleared Cache, Reset to Factory Defaults.
Tried to install new ROM with ODIN. Seems to have worked, but nothing has changed.
Let the tab discharge completely again, then charged it to 100% at a power outlet. Also no change.
What else can I try?
hapibu said:
Problem:
Starts with logo, then comes the Samsung lettering, and after a long time everything starts again from the beginning.
The tab was unfortunately not unlocked at all, i.e. not even USB debugging was enabled
Attempted solutions:
Booted into Recovery Mode, Cleared Cache, Reset to Factory Defaults.
Tried to install new ROM with ODIN. Seems to have worked, but nothing has changed.
Let the tab discharge completely again, then charged it to 100% at a power outlet. Also no change.
What else can I try?
Click to expand...
Click to collapse
So you have flashed latest stock rom on it with odin and odin said it was a success?
sketaful said:
So you have flashed latest stock rom on it with odin and odin said it was a success?
Click to expand...
Click to collapse
I have the exact same problem. I flashed the latest stock rom with odin, got success message but the SM-T830 is still stuck in the bootloop.
I bought the tablet from ebay and was told the bootloop is present since an automatic samsung update. I can only access download mode when the battery is totally empty. Sometimes I can access recovery mode, most of the time there is a black screen and no buttons work at all until the battery is drained.
roadtrip111 said:
I have the exact same problem. I flashed the latest stock rom with odin, got success message but the SM-T830 is still stuck in the bootloop.
I bought the tablet from ebay and was told the bootloop is present since an automatic samsung update. I can only access download mode when the battery is totally empty. Sometimes I can access recovery mode, most of the time there is a black screen and no buttons work at all until the battery is drained.
Click to expand...
Click to collapse
When you try to reach odin mode do you have it connected to the computer? I could only get to the odin mode by having it connected to my pc while pressing power+volume down.
I also could only flash it correctly in Windows 7. Didn't work in Windows 10/11 no matter how I tried...
Also make sure you're flashing at least the same or higher version of stock rom
sketaful said:
When you try to reach odin mode do you have it connected to the computer? I could only get to the odin mode by having it connected to my pc while pressing power+volume down.
I also could only flash it correctly in Windows 7. Didn't work in Windows 10/11 no matter how I tried...
Also make sure you're flashing at least the same or higher version of stock rom
Click to expand...
Click to collapse
With odin mode you mean download mode I guess? I can only access by waiting (over night) for the battery to go totally empty. Afterwards I hold vol+ and vol- and connect USB to the pc, then I can access download mode.
I use windows 10 in virtualbox on linux, and I cannot downgrade the stockrom, I flashed T830XXU5CUE2 with odin in windows 10.
I would like to try a recent combination rom, but can't find a u5 version .
To me it seems like a serious samsung issue which is not caused by wrong flashing, but caused by malfunctioning software update of samsung.
roadtrip111 said:
With odin mode you mean download mode I guess? I can only access by waiting (over night) for the battery to go totally empty. Afterwards I hold vol+ and vol- and connect USB to the pc, then I can access download mode.
I use windows 10 in virtualbox on linux, and I cannot downgrade the stockrom, I flashed T830XXU5CUE2 with odin in windows 10.
I would like to try a recent combination rom, but can't find a u5 version .
To me it seems like a serious samsung issue which is not caused by wrong flashing, but caused by malfunctioning software update of samsung.
Click to expand...
Click to collapse
Ah, That's a bummer. I just connect it to the PC and hold vol-down + power until it shuts down and quickly release and then hold the buttons again.
So I managed to get out of the bootloop. It was a looong journey and I can't reproduce what exactly made it work again. I did several data/factory resets & wipe cache in recovery mode, I flashed firmware in odin several times, but nothing helped. As OEM is locked and i could not unlock it, because of the bootloop not letting me get into the system, adb and fastboot did not help much. But finally the tab is back alive again. I hope the provided information might help somebody else, even if not consistent:
# I used Windows 10 in virtualbox on linux.
# I installed Samsung mobile drivers directly from Samsung
# I used Odin3-v3.13.1
# I flashed current firmware "T830XXU5CUE2". Downgrading wasn't possible because OEM was locked anyway.
I tried it maybe 20-30 times with and withound re-partition and nand erase in odin. The flashing was always successful but the boot loop was still present.
This are the last steps that might have made the difference:
1. I flashed only BL_T830XXU5CUE2_CL21567889_QB40146090_REV00_user_low_ship_MULTI_CERT.tar.md5 in BL, not the rest of the firmware
Afterwards I rebooted, but bootloop was present. So I waited for the battery to go empty, then back in download mode
2. I flashed the whole firmware BL, AP, HOME_CSC with pit file and re-partition and nand erase
Afterwards I rebooted, but bootloop was present. So I waited for the battery to go empty, but this time I went into recovery mode
3. wipe data/factory reset
4. wipe cache partition
5. reboot system now
and finally it worked.
I really don't know what made the difference as I feel I did these steps before without sucess, but maybe it helps somebody.
Good luck!
flink88 said:
Всем привет. Я надеюсь, что вы хотите мне помочь.
Я замуровал свой sm-t830, выключив его, когда приложение было перенесено на SD-карту (я знаю, что я совершенно тупой), и знаю, что моя вкладка застряла в бутлупе.
Я уже прошил его единичные выбросы прошивками (AP, BL, CSC) с odin 3, но ни одна из них не увенчалась успехом. Одна из событий оказалась в том, что я не знаю, какая у меня вкладка csc (эта вкладка была куплена в Эстонии). У меня очень мало опыта по перепрошивке устройств, так как последний раз я был на HTC Hero много лет назад. Так что, если кто-нибудь сможет мне помочь, это будет очень признательно.
Я, конечно, не знаю, достаточно информации, поэтому спросите меня, что вам необходимо, и я отвечу, насколько это возможно.
Большое спасибо за любой пом
Click to expand...
Click to collapse
flink88 said:
Пожалуйста?
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator
Hi. Flash it through odin. It will work. samsung has high firmware requirements. Download the firmware of the same android version and region. I couldn't flash it the first time either
*******************
привет. Прошивайте через odin. Все получится . У samsung высокие требования к прошивке. Качайте прошивку того же версии андроид и региона. Я тоже не мог прошить с первого раза
Related
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
graatenbil said:
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
Click to expand...
Click to collapse
Try to explain better! Do you have installed custom recovery?
no i installed a modified multi language rom from "needroom" did every as told and everything looked fine during the upgrade and when i was finished i got the green circle that says it was ok but when started it up it went in to boot loop and said "TOOL DL image fail!" but after a while its totally dead.,when i try now it wont load in any software into the phone ,just starts up the purple pre preparation on the SP flash tool but when i connect the phone it stops .cant get it into recovery mode or anything,just completely dead. i would rely be thankful for some advice her
Maybe the package you've tried to install is corrupted.
most likely, but is there anything to do with it or is it over for it.
graatenbil said:
most likely, but is there anything to do with it or is it over for it.
Click to expand...
Click to collapse
Most likely your device is unusable. Without any recovery, I dont think you will be able to do anything. I am sorry.
OK a 200$ experience richer , thanks anyway
graatenbil said:
OK a 200$ experience richer , thanks anyway
Click to expand...
Click to collapse
Just a question....are you able to enter fastboot?
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
hello my friend. I got exactly the same thing that I just tried to install TWRP. I stuck in Boot loop. solution found by disconnecting the battery. and making again the same procedure. but once I checked her DA DL All. Now how puts the battery is another story .but if I want i tell you, you need some tools that may have in your home..
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
setmov said:
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
Click to expand...
Click to collapse
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
RE
leo_alex82 said:
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
Click to expand...
Click to collapse
The phone started in normal mode after the battery dryed and the phone went off.
Hi, has anyone Lenovo S850 firmware upgrade solution? Now I have resolve "DL Tool Image Fail" problem but have another problem - every rom I download touch screen doesn't work. On "original" rom (not multilanguage) touch screen worked properly. Does anyone have "good" multilanguage rom with touch screen working?
method to install original rom android 4.4.2 in lenovo s850
i have found the perfact solution to install original 4.4.2 rom on lenovo s850...so for that you have to donload rom from the link in notepad file...i have uploaded notepad file and download link is in that it is about 1.1 gb...so it will take time to download and after that what you have to do is open flash tool and then check da dl check sum and then extract the file you have download of 4.4.2 android and then in flash tool click on scater loading and browse to the the extraction location and in extracted folder there will be a folder somethinf target bin in that folder select scatter loding file of lenovo s850 and then just simply click on upgrade firware and then switch off your phone and then wait to process complete untill green circle come...and if you dont have flash tool...google it and download...thanks i hope this helps someone...:good::good::good::good:
Dear devs, help me out on UNBRICKING LENOVO S850:
Initial Problem was: AFTER TURNING PHONE ON (NORMAL BOOT UP) IT GOT STUCK ON BOOT LOGO.
Very first tried solution: PRESSING BOTH VOL.+POWER PHONE WENT IN LENOVO RECOVERY MODE. THEN I TRIED TO FUSE FORMAT BUT IT FAILED TO FORMAT. PROBLEM REMAINED SAME.
Second Tried Solution: DOWNLOADED OFFICIAL STOCK ROM (A. Lenovo_S850_VIBEUI_V1.5_1419_2_ST_S850_4.4.2 B.Lenovo_S850_ROW_S211_140923 C. Lenovo_S850_ROW_S207_140814. D. Lenovo S850 official firmware flash file) + ALL AVAILABLE SP FLASH TOOLS + USB VCOM DRIVER FOR MEDIATEK AND INSTALLED DRIVERS.
USING ABOVE FILES I TRIED TO DOWNLOAD ALL ROMS WITH DIFFERENT SP FLASH TOOLS VERSIONS BUT ALL THE TIME RED BAR CAME TO 100% THEN BAR STUCK ON 0% FOLLOWED BY ERROR "SDMMC WRITE FAIL".
THEN I TRIED UPGRADING FIRMWARE, SAME AGAIN IT GAVE ERROR "FORMAT FAILED"
THEN I TRIED TO FORMAT USING FLAH TOOL (ALL VERSIONS) AGAIN IT GAVE SAME ERROR "FORMAT FAILED"
crazy
ur cable problem pp
Hi All,
I need your help :crying:
I have Asus Zenfone 2 ZE551ML which was bought couple of months back. Since it had lots of bloatware apps, I thought of installing unofficial cyanogen mode 12.1 os in my phone. Though the installation was successful, I was forced to uninstall this too early as it had too many bugs.
As a initial step I tried to restore the original recover and I was successful. But in between I tried flashing the boot and something went wrong. Now I am unable to go to the boot loader option - it always shows a 'usb' icon. I tried with power button + volume button combinations, also I tried adb reboot-bootloader but no luck. All these options took me to a screen where it shows just a usb icon image.
Could you please help me to restore the boot loader ? Also please help me to restore my original firmware.. Please...:crying:
Appreciate your efforts.
Seby
hard briked, same here, hope somebody here on xda can help us
It sounds like you flashed the wrong image file on boot partition... Beware copy and paste when doing this...
ultramag69 said:
It sounds like you flashed the wrong image file on boot partition... Beware copy and paste when doing this...
Click to expand...
Click to collapse
Yeah.. I flashed wrong file. What can be done now? Could you please suggest?
sebypp said:
Yeah.. I flashed wrong file. What can be done now? Could you please suggest?
Click to expand...
Click to collapse
Take back to ASUS and hope it will be replaced under warranty....
Similar tragedy happened to me few months ago. Flashed the wrong file, and the recovery partition missing. On zenfone 5. Somehow the phone still boot with cm12.1. Tried everything, still unsolved. Not yet tried asus service centre. So i give that phone to my sister, and i bought this zenfone 2. Lesson learned. ?
Sent from my ASUS_Z00AD using Tapatalk
Thanks to all!
Finally I got it repaired from ASUS service centre under warranty!! That was awesome!!
Thanks for all your support.
i have problem.. Please watch video
youtube.com/watch?v=AWXi1icf6EY
xfstk-downloader
The only way out is to use xfstk-downloader. But the problem is in missing required files FW DnX, IFWI, OS DnX, OS Image files. Especially last two of them which can't be found in firmware files. Same solution already exists for Zenfone 5/6
Hi all! I ask your help! I have Moto z2 Force on 8.0 Oreo and I installed custom recovery twrp-3.2.1-1-nash.img and foolishly chose Slot-B and then I reboot the phone. Now when connected to a computer, it is defined as Qualcomm HS-USB QDLoader 9008 . How can I bring it back to life?! Help please! :crying:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
yakutza said:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
Click to expand...
Click to collapse
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
PoisonDash2 said:
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
Click to expand...
Click to collapse
This happened to me on t-mobile yesterday and I managed to solve it by downloading this: (T-Mobile only) https://drive.google.com/file/d/1fM5KLheeMYcs3yF7InOzHq6yGCOmrrbk/view
Extract the zip and while your phone is connected to your pc and booted in bootloader mode, run flash_all.bat, boot (don't flash) TWRP, install TWRP with the TWRP zip found here: https://dl.twrp.me/nash/twrp-installer-nash-3.2.1-1.zip.html
Then reboot to your newly installed TWRP recovery, factory reset, flash rom, reboot bootloader and run "fastboot -w".
After that you should boot up fine. Fastboot -w might not be necessary but I had to do it, otherwise I would boot but I would get an error message "android.process.media has stopped" without it.
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Will71000 said:
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Click to expand...
Click to collapse
If its get detect as QHUSB_BULK in conputer and installing Qualcomm drivers get it to Qh_usbloader 9008 under COMports then theres no way ti revive ur phone. Theres no Blank Flash files yet available for Moto Z2 Play
Hey there everyone.
I tried flashing the stock ROM with a patched Magisk image.
However I cannot seem to flash the image. ODIN gets stuck on "system.img" ...
F. Reset time is ticked in ODIN.
My phone is just softlocked, I can reboot into Download mode.
But when I start the phone, it tells me that "something went wrong during the firmware upgrade" and to install "samsung smart switch", however that software cannot detect my phone and reflash.
Phone is connected with the stock USB C cable, I also tried a different cable.
I am currently downloading all the tools and redownload firmware with SamFirm 0.3.6 (I know it's deprecated, but it's the fastest and seems to work) to a different PC (Surface Go) and try to flash with that PC, maybe my current laptop is broken (Dell G3).
Are there other things that I can try?
Some information:
Note 10 plus SM-N975F , Exynos international version
Original country code DBT
PDA N975FXXU1ASHE
CSC N975FOXM1ASHE
Odin 3.13.1 & 3.13.1_3b
Screenshot & phone image:
https://imgur.com/a/vCZWmy7
Thanks!
Update:
I switched from my Dell G3 to a Surface Go, and on the surface go ODIN works!
I flashed the stock ROM and am now trying to re-flash with Magisk installed.
Hey there! I've check some of the models of your G3 Dell comes with Thunderbolt while others don't you might want to recheck the ports that you tried? What happen to me was similar. I tried many different USB C cables but nothing work until i tried a different port on the side which then work. After setting everything up I was still not satisfied with the back port not working so I switched on my flashlight only to realised that it was a THUNDERBOLT PORT and not a USB C PORT although they both can fit into the same port but they don't really do the same especially when you have a USB C cable plug into a Thunderbolt port. Might wanna check it out!
JayanWarden said:
Hey there everyone.
I tried flashing the stock ROM with a patched Magisk image.
However I cannot seem to flash the image. ODIN gets stuck on "system.img" ...
F. Reset time is ticked in ODIN.
My phone is just softlocked, I can reboot into Download mode.
But when I start the phone, it tells me that "something went wrong during the firmware upgrade" and to install "samsung smart switch", however that software cannot detect my phone and reflash.
Phone is connected with the stock USB C cable, I also tried a different cable.
I am currently downloading all the tools and redownload firmware with SamFirm 0.3.6 (I know it's deprecated, but it's the fastest and seems to work) to a different PC (Surface Go) and try to flash with that PC, maybe my current laptop is broken (Dell G3).
Are there other things that I can try?
Some information:
Note 10 plus SM-N975F , Exynos international version
Original country code DBT
PDA N975FXXU1ASHE
CSC N975FOXM1ASHE
Odin 3.13.1 & 3.13.1_3b
Screenshot & phone image:
https://imgur.com/a/vCZWmy7
Thanks!
Click to expand...
Click to collapse
Question im having a some what similar issue got stuck on system I unplugged it and restarted it just to be stuck on a connect to smart switch screen ..now I can't turn it off only can restart it so that means no recovery mode, how did you restart it back to recovery mode ?
Hi guys, so I was trying to install twrp, then after rebooting it got stuck at Samsung logo page with some stats on the top left. Now my device wont boot up anymore.
Im using s20 ultra sm-g988n
Any assistance is much appreciated.
Edit: I managed to reflash the firmware and its booting up again. But cant seem to root it
Doomsdayzz said:
Hi guys, so I was trying to install twrp, then after rebooting it got stuck at Samsung logo page with some stats on the top left. Now my device wont boot up anymore.
Im using s20 ultra sm-g988n
Any assistance is much appreciated.
Edit: I managed to reflash the firmware and its booting up again. But cant seem to root it
Click to expand...
Click to collapse
Как тебе удалось перепрошить ?