{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Realme GT Master Edition is a 6.43" phone with a sAmoled 1080x2400 resolution display. The Qualcomm SM7325 Snapdragon 778 5G chipset is paired with 6/8GB of RAM and 128/256GB of storage. The main camera is 64+8+2MP and the selfie camera is 32MP. The battery has a 4300mAh capacity.
Commands to remove bloatware:
UNINSTALL CMD
pm uninstall --user 0 [type package name]
REINSTALL CMD
cmd package install-existing [type package name]
DISABLE CMD
pm disable-user --user 0 [type package name]
ENABLE CMD
pm enable [type package name]
Easy method:
Download the attached file "safedebloat.txt" & rename file extension to ".bat" and run it to safely remove unnecessary bloatware.
To find out package name of all installed app, install a app called "Package Name Viewer 2.0"
For detailed guide: Click Here
Working GCAM: Here
Update: So finally Realme has released Kernel sources. Other half of the work is to get them to release the deeptest bootloader unlock tool. Unless we have both its no use. Here
Update2: Now we also have Android 12 Kernel sources, and lots of near stable customs roms too. Do check out Telegram channels. Here
@sidharth_kumar007 I've removed the link to Telegram from the OP of your thread! As an exemption from the last bullet of rule no. 5 of the XDA Forum Rules, we grant only developers the privilege to share references to their social media in their own development threads. These conditions obviously don't apply to your thread or you. Please refrain from sharing of references to social media in future! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
@sidharth_kumar007 I've removed the link to Telegram from the OP of your thread! As an exemption from the last bullet of rule no. 5 of the XDA Forum Rules, we grant only developers the privilege to share references to their social media in their own development threads. These conditions obviously don't apply to your thread or you. Please refrain from sharing of references to social media in future! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
Sure, I wasn't aware of the rule. Thank you
sidharth_kumar007 said:
View attachment 5428869
The Realme GT Master Edition is a 6.43" phone with a sAmoled 1080x2400 resolution display. The Qualcomm SM7325 Snapdragon 778 5G chipset is paired with 6/8GB of RAM and 128/256GB of storage. The main camera is 64+8+2MP and the selfie camera is 32MP. The battery has a 4300mAh capacity.
{Mod edit}
Commands to remove bloatware:
UNINSTALL CMD
pm uninstall --user 0 [type package name]
REINSTALL CMD
cmd package install-existing [type package name]
DISABLE CMD
pm disable-user --user 0 [type package name]
ENABLE CMD
pm enable [type package name]
To find out package name of all installed app, install a app called "Package Name Viewer 2.0"
You can't do anything (uninstall or disable) with "Game Center app" as it's protected. For detailed guide: Click Here
Working GCAM: Here
Lets hope there is development once sources are released. We might also have our dedicated forum if this thread gets enough interest from users.
Click to expand...
Click to collapse
Which Gcam is compatible with the GT master edition? You have linked to all working Gcams....
Also, how do I do that pm uninstall thing?
analogbits said:
Which Gcam is compatible with the GT master edition? You have linked to all working Gcams....
Also, how do I do that pm uninstall thing?
Click to expand...
Click to collapse
For GCAM, download BSGs latest stable one. should work fine.
regarding removal of bloatware here is the detailed guide: Click Here
Any idea about these issues, I'm facing?
https://www.reddit.com/r/Realme/comments/q5rowk
sidharth_kumar007 said:
For GCAM, download BSGs latest stable one. should work fine.
regarding removal of bloatware here is the detailed guide: Click Here
Click to expand...
Click to collapse
Hey man, I'm worried if I root the phone I'll lose access to PhonePe and GPay, are you sure rooting will/will-not remove me from financial apps?
I'm just aggregating them here for reference.
All the Gcam blogs here:
https://www.getdroidtips.com/google-camera-realme-gt-master-edition/
https://droidfunk.com/google-camera-8-2-for-realme-gt-master/
https://www.ytechb.com/download-google-camera-for-realme-gt-5g-and-realme-gt-master-edition/
https://realmetimes.com/google-camera-realme-gt/
https://zetamods.com/gcam-realme-gt/
https://mytechgyangadgets.com/best-gcam-download-google-camera-for-realme-gt-master-edition/
It's mentioned in the Realme website that this phone supports 4k 60fps recording, but there is no option in the camera?
analogbits said:
Hey man, I'm worried if I root the phone I'll lose access to PhonePe and GPay, are you sure rooting will/will-not remove me from financial apps?
Click to expand...
Click to collapse
Removing apps ≠ rooting, and the commands only removes the apps for "user 0", which means that the app is still in your device, it's just removed from you.
BTW the kernel sources still aren't released so no custom recovery for now
litelinux said:
Removing apps ≠ rooting, and the commands only removes the apps for "user 0", which means that the app is still in your device, it's just removed from you.
BTW the kernel sources still aren't released so no custom recovery for now
Click to expand...
Click to collapse
No no. I meant, if I root, these apps generally stop working. That's what I was worried about.
dylanblues said:
It's mentioned in the Realme website that this phone supports 4k 60fps recording, but there is no option in the camera?
Click to expand...
Click to collapse
Can you add the screenshot of the website mentioning it.
analogbits said:
No no. I meant, if I root, these apps generally stop working. That's what I was worried about.
Click to expand...
Click to collapse
Most apps will work. For banking apps and some games that detects root, maybe try MagiskHide.
(Although this is also on its way to oblivion)
analogbits said:
Can you add the screenshot of the website mentioning it.
Click to expand...
Click to collapse
realme GT Master Edition Specifications - realme (India)
realme GT Master Edition in India, Snapdragon 778G 5G Processor | 120Hz Super AMOLED Display | 65W SuperDart Charge. Learn more about technical specifications, colors, configurations, etc. at realme.com
www.realme.com
realme GT Master Edition Specifications - realme (United Kingdom)
realme GT Master Edition in United Kingdom, Snapdragon 778G 5G Processor | 120Hz Super AMOLED Display | 65W SuperDart Charge. Learn more about technical specifications, colors, configurations, etc. at realme.com
www.realme.com
realme GT Master Edition Specifications - realme (Europe)
realme GT Master Edition in Europe, Snapdragon 778G 5G Processor | 120Hz Super AMOLED Display | 65W SuperDart Charge. Learn more about technical specifications, colors, configurations, etc. at realme.com
www.realme.com
Same in EU and UK website as well.
dylanblues said:
realme GT Master Edition Specifications - realme (United Kingdom)
realme GT Master Edition in United Kingdom, Snapdragon 778G 5G Processor | 120Hz Super AMOLED Display | 65W SuperDart Charge. Learn more about technical specifications, colors, configurations, etc. at realme.com
www.realme.com
realme GT Master Edition Specifications - realme (Europe)
realme GT Master Edition in Europe, Snapdragon 778G 5G Processor | 120Hz Super AMOLED Display | 65W SuperDart Charge. Learn more about technical specifications, colors, configurations, etc. at realme.com
www.realme.com
Same in EU and UK website as well.
Click to expand...
Click to collapse
That is surprising, as many youtube reviewers were disappointed because it wasn't avaible. Is there a way to reach out to the company and verify, they'll either update the website, lol. or give us an update with 4k 60fps in the camera option.
analogbits said:
That is surprising, as many youtube reviewers were disappointed because it wasn't avaible. Is there a way to reach out to the company and verify, they'll either update the website, lol. or give us an update with 4k 60fps in the camera option.
Click to expand...
Click to collapse
I don't know how to reach them, but I was certainly mislead. Is there any action consumers can take there must be something surely.
As far as my research goes it's a limitation artificially imposed by QUALCOMM even though the chip and camera module supports it.
analogbits said:
That is surprising, as many youtube reviewers were disappointed because it wasn't avaible. Is there a way to reach out to the company and verify, they'll either update the website, lol. or give us an update with 4k 60fps in the camera option.
Click to expand...
Click to collapse
Some how Iqoo z5 5G can record at 4k60 fps, with same chip and sensor.
Hii can we expect any development for Master Edition like Custom Rom , recovery
Any discussion group available for GT Master Edition??
Related
the latest baidu port for ham
2014/6/18 【lishuo0427] Huawei MATE Unicom / mobile version of Baidu OS 50 Developer Edition + Screen assistant
by lishuo @ Daren pollen ROM
Contact: lishuo personal microblogging
Current ROM Recommended:
First, a special ceremony in Brazil World Cup wallpaper greet
the much-anticipated World Cup in Brazil is already the start, here, Baidu cloud ROM will give you a special World Cup showing fresh wallpaper, and we meet with the enthusiasm of Brazil's summer tide passionate Brazil Carnival!
Second, I'm your youth World Cup Republic
Current cloud ROM and Joy together, launch of "My World"! Not only will the World Cup schedule, list and news and catch more directly lottery, so you see this summer fun, play more Hi.
Passion, lust, life, money, national, you can bet all here! My World, your youth Republic!
Third, the video chat is more convenient to enjoy wonderful event to share
micro-channel import contacts, they still have to manually re-merge? Current ROM to help you save the trouble, not only to support the automatic re-merger, the new micro-channel integrated into the address book entry more free video chat chat without limit, so you and your partner enjoy sharing their World Cup matches.
Fourth, 4.1 camera models support adaptive
models Android4.1 partners benefit came, camera adaptive models are no longer the exclusive 4.0, you can also blossoms framing, easy positioning, shoot high-quality beauties. Set - "select full screen viewfinder framing or adaptive, leaving favorite players moments anytime, anywhere.
Specifically, see:
http://pan.baidu.com/share/link?shareid=4260377790&uk=3828412340
Copy the code
ROM Description:
◆ The ROM based on the latest P6 Unicom / mobile version of Baidu OS 50 Developer Edition transplant
◆ transplant ZTE screen assistant. In Settings - Display - Support hide the virtual keys away virtual keys
◆ join latest supersu pro v1.94 ROOT than Baidu OS comes with a better
browser RE ◆ added to facilitate the secondary customize
◆ Keep ODEX separation, faster system startup
◆ streamline some of the frequency of use is not high Baidu software, Friends of the machine may need to download
the most complete HOST file ◆ shielded wide variety of software built-in high
◆ feeling Baidu OS bigger and beautiful, a lot of very good theme ah
◆ frame optimization, greatly enhance fluency
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
download link : http://pan.baidu.com/share/link?shareid=1638830971&uk=3828412340
original post : http://cn.club.vmall.com/forum.php?mod=viewthread&tid=908512&extra=page%3D1%26filter%3Dtypeid%26typeid%3D236%26typeid%3D236
Brush tutorial:
1 Do not extract the ROM package will download directly on the external SD card
into the brush after two successful third-party recovery shutdown, press and hold the Volume + Power + Volume does not let go until you get to the third party Recovery.
3 to enter. Select the recovery wipe-format data input yes click go
4. return to the main screen and select install
5.external_sd is external sd card in there and find your choice below Brush package will slide from left to right slider starts Brush
6 Brush select reboot system after the completion of the
Click to expand...
Click to collapse
mazi_v said:
the latest baidu port for ham
download link : http://pan.baidu.com/share/link?shareid=2944392188&uk=3828412340
original post : http://cn.club.vmall.com/forum.php?mod=viewthread&tid=908512&extra=page%3D1%26filter%3Dtypeid%26typeid%3D236%26typeid%3D236
Click to expand...
Click to collapse
I actually flashed this yesterday on my P6 and runs smooth.
I just realized that your download link is wrong. It's not for the ROM, it's for some unlocker.
---------- Post added at 08:21 PM ---------- Previous post was at 07:41 PM ----------
Here is the correct link
http://pan.baidu.com/share/link?shareid=1638830971&uk=3828412340
iwtfmcl said:
I actually flashed this yesterday on my P6 and runs smooth.
I just realized that your download link is wrong. It's not for the ROM, it's for some unlocker.
---------- Post added at 08:21 PM ---------- Previous post was at 07:41 PM ----------
Here is the correct link
http://pan.baidu.com/share/link?shareid=1638830971&uk=3828412340
Click to expand...
Click to collapse
thanks buddy.download link corrected.:good:
Chinese only or international?
henk_j said:
Chinese only or international?
Click to expand...
Click to collapse
Usually unicom roms suport english but i didnt tried this one.
henk_j said:
Chinese only or international?
Click to expand...
Click to collapse
mazi_v said:
Usually unicom roms suport english but i didnt tried this one.
Click to expand...
Click to collapse
Chinese and English only.
Ran it for couple of days... nice and smooth, not many Chinese apps. Removed them anyways.
I hate app drawer.
back to one and only MI favourite UI
Ulefone U007 - Information & Reviews - 5.0" HD | MT6580A | 1GB | 8GB | BOX Chamber
Ulefone U007
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Launch (blog)
Ulefone has just released a new 5-inch device named Ulefone U007 (yes, 007!), a budget phone with low specs but also with low price (they declare more or less 60 USD).
As a 5-inch device, it is a pretty compact smartphone supported by HD (720p) resolution, good enough for a small device.
U007 is equipped with Sony IMX149 camera (8MP), interpolated to 13MP, supported by the 5-piece lens kit and F/2.0 aperture. Ulefone says the 2MP front camera, interpolated to 5MP, will offer above-average experiences. (maybe some software additions?)
It packs the quad-core chipset MTK6580A (clocked at 1.3GHz) which should be sufficient for daily use and according to Ulefone official video, racing games like NFS: Most Wanted runs quite smoothly on this device.
It will come with Android 6.0 pre-installed, and Ulefone promises they’ll constantly release OTA Updates to improve the software as they do for their other products.
Similar to the Ulefone Vienna, it features an unified plastic body with brushed finishing, but this time that haven't adopted the side-mounted SIM tray on it. Instead, they choose to allow users to take the cover off to get access to the SIM cards slot (separated) and MicroSD card slot.
Also this one, just like the Vienna, has adopted the BOX sound chamber for better music experience, so speaker quality should be pretty good.
Official Website: http://ulefone.com/products/u007/features.html
Disclaimer: I do not own this device, do not ask me support question because i won't be able to reply you.
Has anyone received this phone?
Almost over a month of ordering and everbuying.net has still not shipped it yet, saying to wait another 10 to 15 days.
Root U007
Hi,
have anyone rooted the Ulefone 007?
regards
AV
VinayakS said:
Has anyone received this phone?
Almost over a month of ordering and everbuying.net has still not shipped it yet, saying to wait another 10 to 15 days.
Click to expand...
Click to collapse
Hello yes I did.. You can youtube my review. Just search Ulefone u007 review by TechUtopia
---------- Post added at 04:34 AM ---------- Previous post was at 04:29 AM ----------
Salam friends. Just to let you know.
If you want to check review of this smartphone.
Youtube it Ulefone U007 review by TechUtopia.
Enjoy
Hi there,
I am interested in this U007, but worry about the security at all... u guys know that the China co. produced phone always has the Backdoor, Trojans.... does any one tested the build-in rom, any abnormal traffic back to China?
Hi All,
I'm also looking for the root for the ulefone u007
Bump, any info on how to root? I have tried Kingroot but it's not supported. Great phone for the price, and thanks for the review @TechUtopia, keep up the good work!
[email protected] said:
Bump, any info on how to root? I have tried Kingroot but it's not supported. Great phone for the price, and thanks for the review @TechUtopia, keep up the good work!
Click to expand...
Click to collapse
Hello,
Yes.... have also used KingRoot... but nothing.
RootGenius also not supported
I search and search but find nothing
regards
Roland
Anyone managed to root yet? Or better yet get a custom ROM working? The stock one is good but it would be nice to get something fresh.
Steve_Goral said:
Anyone managed to root yet? Or better yet get a custom ROM working? The stock one is good but it would be nice to get something fresh.
Click to expand...
Click to collapse
Isn't the stock rom standard unbloated marshmallow?
:bump: for root access on the u007
share-online links:
boot.patched.img(20160526)
SuperSU.apk
su.img
Download the three files, push SuperSU.apk and su.img to /data/local/tmp/ via adb.
Flash boot.patched.img via SPFlashtool, reboot twice and enjoy root
New boot image for firmware 20160818
boot.patched-20160818.img
boot.20161209.img
Popoklaus said:
share-online links:
/dl/EKHG2QBO5FM = boot.patched.img
/dl/EV2G2QBOZD = SuperSU.apk
/dl/VP782QBO4CF = su.img
Download the three files, push SuperSU.apk and su.img to /data/local/tmp/ via adb.
Flash boot.patched.img via SPFlashtool, reboot twice and enjoy root
Click to expand...
Click to collapse
Where are the links?
Add www . share-online . biz (www . share-online . biz/dl/EKHG2QBO5FM) i am not able to post links
Small manual how to flash recovery from 4pda.ru
1. Download Sp-Tool
2. Download recovery with scatter file
2. Install drivers
3. launch SP Flash Tool.
4. In SP Flash Tool press Scatter-loading and choose downloaded MT6580_Android_scatter. Be sure scatter and recovery.img have to be in one folder
5. Press Download in SP Flash Tool, power off phone and connect to PC. Wait while Recovery flashed and appears DOWNLOAD OK. Disconnect phone.
6. Reboot power off phone to TWRP and flash desired zip with superSU etc.
Anyone managed to access root using steps above? Doesn't seem to work for me.
Is your system up to date? The IMG file is for the latest Version. Can you you find the folder /su and the file /init.superuser.rc ?
Popoklaus said:
Is your system up to date? The IMG file is for the latest Version. Can you you find the folder /su and the file /init.superuser.rc ?
Click to expand...
Click to collapse
How do I Flash boot.patched.img via SPFlashtool?
http://forum.xda-developers.com/showthread.php?t=1982587 but instead flashing to recovery flash this file to boot
---------- Post added at 12:14 PM ---------- Previous post was at 12:08 PM ----------
if you dont know how to extract your scatterfile use this www . share-online. biz /dl/0PFEKSBOE5V
TWRP is for Ulefone U007 ?
fraddy said:
Small manual how to flash recovery from 4pda.ru
1. Download Sp-Tool
2. Download recovery with scatter file
2. Install drivers
3. launch SP Flash Tool.
4. In SP Flash Tool press Scatter-loading and choose downloaded MT6580_Android_scatter. Be sure scatter and recovery.img have to be in one folder
5. Press Download in SP Flash Tool, power off phone and connect to PC. Wait while Recovery flashed and appears DOWNLOAD OK. Disconnect phone.
6. Reboot power off phone to TWRP and flash desired zip with superSU etc.
Click to expand...
Click to collapse
The attached TWRP is for Ulefone U007 ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are very excited to announce Paranoid Android Ruby, based on Android 11.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Phoenix Android base [Teamexykings], which is optimized for EXYNOS platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
You can donate here
Device-specific issues
Call related issues on Google Fi
VoLTE
Samsung Pay
ASUS ROG Connection over BT 4.0 (No connection remote too PC annoying during dovolopment)
Miracast Somehow fixed it self or i was testing incorrect
There are likely many other issues, these are just the most prominent to me. Don't come into this with the expectation any issue you come across will be fixed in a timely manner.
Note: Custom kernels are NOT supported unless the kernel says it supports PA and GMS is included!
Requirements
My preferred logging format is:
adb logcat -b all -d *:E > logcat-err.log
adb logcat -b all -d > logcat.log
adb shell dmesg > dmesg.log
I LOG CAT THIS TO TEST FOR YOU, PLEASE FOLLOW AS I DO!
Then you can upload them to https://del.dog and send me the link for each one.
Downloads:
Download for S20: (**MOD EDIT: LINKS REMOVED**)
Download for S20+: (**MOD EDIT: LINKS REMOVED**)
Download for S20 Ultra: (**MOD EDIT: LINKS REMOVED**)
Instructions
This is Same as any other ROM
Flash the provided lineage recovery.img (F2FS support)
Wipe userdata
Flash Paranoid.zip (adb sideload)
Starting with Beta 4, you must clean flash due to recent commits related to userdata.
If you already flashed Beta 1, then you can just sideload the OTA in recovery if it is avaliable, although there might be only fastboot images up for the latest version so keep that in mind.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Cheers and #StayParanoid!
XDA: DevDB Information
Paranoid Android, ROM for the S20 series
Contributors
adam2720
Source Code: https://github.com/synt4x93/android_kernel_samsung_exynos990
ROM OS Version: Android 11
ROM Kernel: Linux 4.xx
ROM Firmware Required: OneUI 3.x
Version Information
Status: Stable
Current Stable Version: Ruby
Beta Release Date: 2021-04-03
Created 2021-04-03
Last Updated 2021-04-03
Reserved...
For direct contact, please it's over Telegram or PM here, anything how to compile or any question about anything not specifically related to this ROM please don't write here, please write directly.
(for anything missed, Sorry, this my first XDA thread i ever post )
Reserved...
Reserved...
Hi, I've used TeamExyKings ROMs before, a while back and different phone.
Do I need to root my phone first or does the Recovery flash do that?
Journyman16 said:
Hi, I've used TeamExyKings ROMs before, a while back and different phone.
Do I need to root my phone first or does the Recovery flash do that?
Click to expand...
Click to collapse
Recovery does it for you (It will not root your phone but it will prepare you to flash the ROM)
Welcome back
Message us on XDA or Telegram if you're unsure of anything
Best regards
Does this rom support 120 hz refresh rate ?
ahmedamr002 said:
Does this rom support 120 hz refresh rate ?
Click to expand...
Click to collapse
I'm not sure, could you please upload a screenshot of a display hz check app?
adam2720 said:
I'm not sure, could you please upload a screenshot of a display hz check app?
Click to expand...
Click to collapse
Just go to https://www.testufo.com/
Hey there I get no audio when flashing this rom I'm on S20 Ultra
Wogleb12 said:
Hey there I get no audio when flashing this rom I'm on S20 Ultra
Click to expand...
Click to collapse
But at least you got no lags right?
Wogleb12 said:
Hey there I get no audio when flashing this rom I'm on S20 Ultra
Click to expand...
Click to collapse
Can you read OP?? I POST CLEAR INSTRUCTIONS please follow dont report any bug without follow my guide on OP! this is noob
btw no one else has ur problem with no audio maybe u use silence mode, i dont' care i cant check anything due to you no logs..
David03354 said:
But at least you got no lags right?
Click to expand...
Click to collapse
hi paranoid andriod has anti-off and anti-lag witch means phone dont really turns off at 1% while charging 0% while charging phone stays on without offing Also anti-lag really nice smooth I Love Paranoid Android
hows your opinion on my rom?
Anyone checked if high refresh rate works? That's the only thing that stops me form installing a custom rom
Same here. I'm eager to try it. 120hz would be a necessity.
Also, are all cameras fully working?
pintasmapila said:
Same here. I'm eager to try it. 120hz would be a necessity.
Also, are all cameras fully working?
Click to expand...
Click to collapse
cameras yeah all work
120hz should work but would be nice if you double check
adam2720 said:
cameras yeah all work
120hz should work but would be nice if you double check
Click to expand...
Click to collapse
since you build this prob using the Exynoobs tree, no 120hz wont work
xBrownieCodez said:
since you build this prob using the Exynoobs tree, no 120hz wont work
Click to expand...
Click to collapse
Of course i didn't good luck compiling CAF based android on that and I wont share device tree since it not under GPL or on any website i uploaded!
Hi there, thanks for the rom. Any screenshots available of this rom??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Q) what is SlimSang?A) SlimSang is a Custom ROM based on ONE UI for Samsung Galaxy S21 FE developed and Maintained by BurningLion
Please read the thread carefully
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards.
Change Logs𝗦𝗹𝗶𝗺𝗦𝗮𝗻𝗴 𝗥𝗢𝗠 𝘃𝟲 𝗙𝗶𝗻𝗮𝗹 [Updated 12/04/2023]
Model: G990E (Minimal De-Bloat)
{ PASSWORD HAS BEEN REMOVED ALSO ALL SLIMSANG features TOO }
*Base Updated to EWC2 & EWC1
*Pre Rooted with magisk 26.1 [Stable]
*Image Clipper Ported from S23
*Adaptive refresh rate option added [In display tab - To make it work flash Advance refresh rate module by slimsang ]
*SlimSang minimal boot animation [Change it if you want multiple options available ]
*Custom 16Bit ringtones
*New wallpapers
-For Dex, Lockscreen & Graphical
*Lockscreen clock edit bug fixed
*Dex working
*Bixby Working
*New Charging Animation [Difference for home & lock]
*Battery Charging indicator added
*Battery percentage bug fix on charging screen
*Camera cutout overlay update
*Screen Resolution Changer optimisation
*Wearable connection delay fixed
*Bluetooth ringtone delay fixed
*Device model number returns to S21FE [ Before it was S23 Ultra]
Few script tweaks
*Fonts collection removed [ Will be available soon as a magisk module]
*Minimal Debloat
*ROM size Optimised (4.3Gb to 3.9Gb)
*Script tweaks (csc,ff,prop etc)
Maybe more...!
*Installation will take some time (installation & booting process will take around 8 to 9 min)
*Clean installation strongly recommend
No Google restore. Take backup in Samsung cloud or root back-up or flash Gapps so you will get back the G-setup.
Download Link & Installation Unlock bootloaderInstall Twrp & follow all the procedures
Snapdragon Twrp & Guidance
Exynos Twrp & Guidance
>Flash BL in ODIN
#G990E BL
#G990B BL
#G9900 BL
>EXTRACT ZIP & FLASH IMAGE AS FOLLOWING
-BOOT.IMG AS BOOT
-OPTICS.IMG AS OPTIC
-SUPER.IMG AS SUPER
>Wipe data (Recommend) not compulsory
>Boot the device.
ROM: Screenshot
ROM DOWNLOAD Link
G990E
G990B
G9900
*Tips To Pass SafetyNet & Get play certified. Step 1 - Rename magisk then reboot. Step 2 - Enable Zygisk, Flash safetynet module & hide app you want(also play store & play services). Step 3 - clear data of play store. Reboot Done!SlimSang ROM website
Kernel Source
TELEGRAM SUPPORT For Quick Response
View attachment 5802779Spacial Thanks To Everyone Who Have Contributed To One Ui Devlopment Doesn't Matter If He/She Still Working Or Not. Its Not Possible To Mention Everyone But Still I Am Thankful to@Subodh.993435 for always helping me when i need...
@TenSeventy7 for allowing me to re-brand Zest
@BlassGO @el0xren @kirbyNx & Mr.Yang.
Tester: @Billabomb75
@ Samsung - FIrmware and kernel
Developer Of SlimSang Rom : BurningLion
@sujayc27 Greetings. As a friendly reminder, your kernel source is required in your OP as per XDA's rules for maintaining GPL Compliancy.
Please add this within the next 5 days in order to prevent thread closure. Thank you.
-Regards: Badger50
Badger50 said:
@sujayc27 Greetings. As a friendly reminder, your kernel source is required in your OP as per XDA's rules for maintaining GPL Compliancy.
Please add this within the next 5 days in order to prevent thread closure. Thank you.
-Regards: Badger50
Click to expand...
Click to collapse
My Bad.... I will fix it!
Nice work!
Please fix lockscreen edit.
Thank you.
caltkevv said:
Nice work!
Please fix lockscreen edit.
Thank you.
Click to expand...
Click to collapse
In 5.3 it's already Fixed!
What is Advance Refresh Rate?
Mrawy said:
What is Advance Refresh Rate?
Click to expand...
Click to collapse
It's a module to Enable "Adaptive Refresh Rate" in any Samsung Device (which have multiple refresh rate) [Magisk]
May I see some screenshots please?
Billabomb75 said:
May I see some screenshots please?
Click to expand...
Click to collapse
Screenshot Option also added to the post.
Don't Forget to join our group for instant support.
Thanks for support. When we can see an aosp pixel rom? (Exynos)
MemurBey said:
Thanks for support. When we can see an aosp pixel rom? (Exynos)
Click to expand...
Click to collapse
It's my pleasure
& Regarding aosp ROM I am not sure if this gonna happen.
Atleast No plans for now!
sujayc27 said:
Screenshot Option also added to the post.
Don't Forget to join our group for instant support.
Click to expand...
Click to collapse
Looks super clean. Im tempted to load it. but gonna have to wait for warranty to be done
Billabomb75 said:
Looks super clean. Im tempted to load it. but gonna have to wait for warranty to be done
Click to expand...
Click to collapse
Ha ha ha.... Okay okay take your time buddy
sujayc27 said:
Ha ha ha.... Okay okay take your time buddy
Click to expand...
Click to collapse
Hahahah yeah, only April Next year though ;(
I don't know why people still need custom rom for this. The manufacturer rom already very good and stable
ndl318 said:
I don't know why people still need custom rom for this. The manufacturer rom already very good and stable
Click to expand...
Click to collapse
The reason why people change roms is to get rid of the bloatware and sometimes it has a performance boost and battery life is much better. Also a lot of features that you normally can't get.
ndl318 said:
I don't know why people still need custom rom for this. The manufacturer rom already very good and stable
Click to expand...
Click to collapse
Different people
Different view
Different choice
Thank you!
Billabomb75 said:
The reason why people change roms is to get rid of the bloatware and sometimes it has a performance boost and battery life is much better. Also a lot of features that you normally can't get.
Click to expand...
Click to collapse
Hi there. I have a problem, I did everything according to the instructions. First I unlocked the bootloader, installed DVL1 using ODIN. After that I installed TWRP, after that I flashed the ROM in TWRP. After that, my phone does not boot. (Dev G990B2) Attaching photo. What i did wrong?(
epsilon.archi said:
Hi there. I have a problem, I did everything according to the instructions. First I unlocked the bootloader, installed DVL1 using ODIN. After that I installed TWRP, after that I flashed the ROM in TWRP. After that, my phone does not boot. (Dev G990B2) Attaching photo. What i did wrong?(
View attachment 5808171
Click to expand...
Click to collapse
without knowing exactly what you did to your device Cannot help...
But for now I will suggest flash stock (dvl1) with odin & flash zip again.
Before flashing zip take a backup to quickly recover the device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
Known issues
Nothing yet
You tell usMaintainers:
@MajorP93 and @KakatkarAkshay
Instructions:
https://wiki.lineageos.org/devices/avicii
Downloads:
https://download.lineageos.org/avicii
GPL compliance:
https://github.com/LineageOS/android_kernel_oneplus_sm7250
Report bug:
https://wiki.lineageos.org/how-to/bugreport
LineageOS Nord Telegram Community:
https://t.me/lineageos_nord
Donate:
Like our work? You can support us by donating:
MajorP93: https://paypal.me/MajorP93
KakatkarAkshay: UPI: [email protected]
A big congratulations on going official!
Does this mean the LineageOS + microG version is not far behind and will appear on https://download.lineage.microg.org/ soon?
I don't understand much about it, only that the build process is automated.
JustH3reToComm3nt said:
A big congratulations on going official!
Does this mean the LineageOS + microG version is not far behind and will appear on https://download.lineage.microg.org/ soon?
I don't understand much about it, only that the build process is automated.
Click to expand...
Click to collapse
Yes, should appear there soon.
MajorP93 said:
Yes, should appear there soon.
Click to expand...
Click to collapse
Thank you for the response and the hard work!
Your hard work is much appreciated @MajorP93 !
I am attempting to do a typical LineageOS upgrade from the Official 17.1 to Official 20.0, however I get the following error message: "E: Package is for product Nord but expected OnePlusNord". Any thoughts on how to resolve? Thank you in advance
NetHistorian said:
Your hard work is much appreciated @MajorP93 !
I am attempting to do a typical LineageOS upgrade from the Official 17.1 to Official 20.0, however I get the following error message: "E: Package is for product Nord but expected OnePlusNord". Any thoughts on how to resolve? Thank you in advance
Click to expand...
Click to collapse
Please refer to the official setup instructions:
Install LineageOS on avicii | LineageOS Wiki
wiki.lineageos.org
As stated there it is required to be on latest Android 12 firmware before installing LineageOS 20.
Since you are currently running LineageOS 17.1 it will be required to install OxygenOS 12 first and install LineageOS 20 afterwards.
For reverting to OxygenOS 12 I recommend using MSM tool.
MSM tool will bring you to OxygenOS 10. Install all OTA updates until you are on latest OxygenOS 12.
MajorP93 said:
Please refer to the official setup instructions:
Install LineageOS on avicii | LineageOS Wiki
wiki.lineageos.org
As stated there it is required to be on latest Android 12 firmware before installing LineageOS 20.
Since you are currently running LineageOS 17.1 it will be required to install OxygenOS 12 first and install LineageOS 20 afterwards.
For reverting to OxygenOS 12 I recommend using MSM tool.
MSM tool will bring you to OxygenOS 10. Install all OTA updates until you are on latest OxygenOS 12.
Click to expand...
Click to collapse
Whoops! I overenthusiastically jumped straight to the "Upgrade to a higher version" section and missed that completely!
It looks like the MSM tool only works for Windows, so I shall follow this guide when I get a chance and report back the results (in case anyone else on Linux/Mac wishes to attemp the same).
Thanks again!
NetHistorian said:
Whoops! I overenthusiastically jumped straight to the "Upgrade to a higher version" section and missed that completely!
It looks like the MSM tool only works for Windows, so I shall follow this guide when I get a chance and report back the results (in case anyone else on Linux/Mac wishes to attemp the same).
Thanks again!
Click to expand...
Click to collapse
You can also join our Telegram group if you want.
Multiple Linux users got it working by using another method.
For now I will copy the steps from the Telegram group into this post:
Flash OOS12 via fastboot (without MSM tool)
Please note: this is an experimental method, using MSM tool is still the preferred method!
- Download full OOS12 ROM zip from here: Link (https://forum.xda-developers.com/t/oneplus-nord-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4138085/) (Signed flashable zips —> select region —> download latest AC2003_11_F.X)
- Extract ZIP
- Extract payload.bin using payload dumper
- Place all extracted files in a new folder
- Download super_empty.img, flash.bat and flash.sh from here (Link (https://www.androidfilehost.com/?fid=4279422670115720730)), extract and place them in the same folder as extracted payload files
- Put phone into bootloader mode
- Type "fastboot reboot fastboot" and press enter
- Execute flash.bat (Windows) or flash.sh (Linux / MacOS) in command prompt
- Wait until done, OOS12 should be installed now
Click to expand...
Click to collapse
If those steps do not work for you I recommend using a Windows VM (virtual machine) with USB passthrough for running MSM tool.
MajorP93 said:
You can also join our Telegram group if you want.
Multiple Linux users got it working by using another method.
For now I will copy the steps from the Telegram group into this post:
If those steps do not work for you I recommend using a Windows VM (virtual machine) with USB passthrough for running MSM tool.
Click to expand...
Click to collapse
Just joined
That's brilliant! Looks a whole lot simpler. Thanks for the extra help!
Does this support 48mp camera? Or we would end up with 24 or 12 mp? Thanks for answering
Rhasta42067 said:
Does this support 48mp camera? Or we would end up with 24 or 12 mp? Thanks for answering
Click to expand...
Click to collapse
The 48 MP are only marketing, 2x2 pixels of the sensor are always combined into one output pixel, so you always "only" get 12 MP on the Sony IMX586.
Quotation from the Sony page: "... The new sensor uses the Quad Bayer color filter array, where adjacent 2x2 pixels come in the same color, making high-sensitivity shooting possible. During low light shooting, the signals from the four adjacent pixels are added, raising the sensitivity to a level equivalent to that of 1.6 μm pixels (12 megapixels), resulting in bright, low noise images. ..."
Doc Sniper said:
The 48 MP are only marketing, 2x2 pixels of the sensor are always combined into one output pixel, so you always "only" get 12 MP on the Sony IMX586.
Quotation from the Sony page: "... The new sensor uses the Quad Bayer color filter array, where adjacent 2x2 pixels come in the same color, making high-sensitivity shooting possible. During low light shooting, the signals from the four adjacent pixels are added, raising the sensitivity to a level equivalent to that of 1.6 μm pixels (12 megapixels), resulting in bright, low noise images. ..."
Click to expand...
Click to collapse
It's not marketing. With the official camera app you can get 48MP output from the sensor. It's pretty useful for cropping since the phone doesn't have a zoom lens but it's only good in well lit situations. Personally I've only used it a few times since I prefer GCam which doesn't support 48MP output.
mythos_ said:
It's not marketing. With the official camera app you can get 48MP output from the sensor. It's pretty useful for cropping since the phone doesn't have a zoom lens but it's only good in well lit situations. Personally I've only used it a few times since I prefer GCam which doesn't support 48MP output.
Click to expand...
Click to collapse
Maybe that's true what you say, but the original questioner asked if this ROM supports 48 MP and the answer will be rather no.
Can someone try Android Auto? I'm having problems with the build here. It's more about the USB procedure, so it hangs and then closes.
Doc Sniper said:
Doc Sniper said:
Maybe that's true what you say, but the original questioner asked if this ROM supports 48 MP and the answer will be rather no.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
It is true. No mabys about it.
Also your answer was:
Doc Sniper said:
The 48 MP are only marketing, 2x2 pixels of the sensor are always combined into one output pixel, so you always "only" get 12 MP on the Sony IMX586.
Click to expand...
Click to collapse
This is simply false. The sensor fully supports 48MP output. The camera included in this ROM (or possibly the OS itself) simply doesn't support this function.
mythos_ said:
It is true. No mabys about it.
Also your answer was:
This is simply false. The sensor fully supports 48MP output. The camera included in this ROM (or possibly the OS itself) simply doesn't support this function.
Click to expand...
Click to collapse
By the way: this is the case on all custom ROMs for the OnePlus Nord.
OnePlus does not offer an API for developers to make use of the full 48MP.
For custom ROMs we kinda have to live with this "limitation".
In my opinion when using GCam or Aperture the image quality is still very good.
Colors are even more natural compared to OnePlus camera app due to improved image processing.
MajorP93 said:
By the way: this is the case on all custom ROMs for the OnePlus Nord.
OnePlus does not offer an API for developers to make use of the full 48MP.
For custom ROMs we kinda have to live with this "limitation".
Click to expand...
Click to collapse
Yeah I know. I actually read up a bit on the camera when I bought the phone. I was looking for a way to get data from the depth sensor. It's the same situation with that unfortunately. No way to use it outside the official camera (which itself barely ever uses it).
MajorP93 said:
In my opinion when using GCam or Aperture the image quality is still very good.
Colors are even more natural compared to OnePlus camera app due to improved image processing.
Click to expand...
Click to collapse
GCam is way better than the stock camera. The post processing it does (with the right profiles) gives much more realistic results than the too-much-HDR look of the official camera. Also in low light situations it's miles ahead. I wish it could support 48MP just for cropping due to lack of zoom but overall GCam is the clear winner.
Hello, just flashed the latest nightly seems you can't flash Gapps just after the Lineage flash (like said in the tutorial) because he think that the phone is still in Android 12 (because coming from official latest build) so I needed one boot to change the SDK version but :
The Gapps doesn't have internet (but the others apps got it since i'm writing this from the phone)
EDIT : I found a solution (I already had this problem and had forgotten since it was like 10y ago), just factory reset the phone (through the settings not a full recovery reset) to have again the initial configuration of Google which allows to accept the conditions of use (otherwise the applications are blocked)
I will daily this to test it, for now everything seems perfect, I just got 1 weird Bluetooth disconnect
Any advice for the Camera app (AOSP/Lineage one seems very basic), I use the latest GCam Nord compatible right now but I guess no one worked on a Android 13 one or just an newer
So, I was running LineageOS17 and followed the instructions with installing the new firmware before upgrading to 20. I must have screwed up somewhere along the way as I got stuck in the bootloader and found no other way out than to start over and follow the instructions; use the MSM4 tool to install OOS10, upgrade to 12 and then wipe and install LineageOS20.
So far so good. Everything seems to be working as it's supposed to. Until I finalized setting up the phone; for some reason it refuses to locate my Ikea Dirigera hub and two Heos units (2x Denon AVR). It worked perfectly before I started upgrading my phone. I tested with my work phone which has never been on the network previously and it found all 3 units immediately without an issue.
I'm confused. I am considering starting over (again) to see if it'll work with OOS12 installed, but it'll feel like a waste of time if it doesn't change anything.
Is there some fancy WLAN setting I might have missed on LineageOS20? Or should I try to manually install the WLAN firmware (modem.img?) again - and in which case which specific file/version should I use?
Ridou said:
Hello, just flashed the latest nightly seems you can't flash Gapps just after the Lineage flash (like said in the tutorial) because he think that the phone is still in Android 12 (because coming from official latest build) so I needed one boot to change the SDK version but :
The Gapps doesn't have internet (but the others apps got it since i'm writing this from the phone)
EDIT : I found a solution (I already had this problem and had forgotten since it was like 10y ago), just factory reset the phone (through the settings not a full recovery reset) to have again the initial configuration of Google which allows to accept the conditions of use (otherwise the applications are blocked)
I will daily this to test it, for now everything seems perfect, I just got 1 weird Bluetooth disconnect
Any advice for the Camera app (AOSP/Lineage one seems very basic), I use the latest GCam Nord compatible right now but I guess no one worked on a Android 13 one or just an newer
Click to expand...
Click to collapse
You encountered that issue because you did not reboot to recovery prior to installing Gapps.
Maybe you looked into the wrong tutorial, it's mentioned in the correct one here:
https://wiki.lineageos.org/devices/avicii/install --> "Installing Add-Ons"
Regarding camera app: I can recommend GCam. You can find a compatible version in our Telegram group.