My moto g9 plus Odessa xt2087-2 sd730 retail hardbrick no fastboot mode show no bootloader show device connect pc only show Qualcomm download mode please solve my problem
ItsAsfar said:
My moto g9 plus Odessa xt2087-2 sd730 retail hardbrick no fastboot mode show no bootloader show device connect pc only show Qualcomm download mode please solve my problem
Click to expand...
Click to collapse
Is my device in EDL Mode?
Yes my device show edl mode i connect pc qualcomm hs-usb qdloader 9008 show
sd_shadow said:
Is my device in EDL Mode?
Click to expand...
Click to collapse
ItsAsfar said:
Yes my device show edl mode i connect pc qualcomm hs-usb qdloader 9008 show
Click to expand...
Click to collapse
So, now you need to find a Blankflash.
sd_shadow said:
So, now you need to find a Blankflash.
Click to expand...
Click to collapse
Yes i mostly search Moto g9 plus blank flash file no one upload this file
Unbrick MOTO G9 PLUS
Warning!!!!! i lost my imei during this process..proceed with caution i m not responsible for any damage to your phone hello guys !! A few days ago i used "fastboot erase all" command which led my phone to not booting at all.... i tried...
forum.xda-developers.com
ItsAsfar said:
Yes my device show edl mode i connect pc qualcomm hs-usb qdloader 9008 show
Click to expand...
Click to collapse
how did you manage to put the moto g9 plus in edl mode. can you teach me please friend
i have a serious problem on my moto g9 plus cell phone. I can't get into edl mode on moto g9 plus. Can someone teach me how to get into edl mode even through the motherboard. I've done everything and still nothing.
ItsAsfar said:
Yes i mostly search Moto g9 plus blank flash file no one upload this file
Click to expand...
Click to collapse
i have the blank flash file of moto g9 plus XT-2087-1- ODESSA
being able to put my moto G9 plus in EDL mode without doing almost anything on win10 very easy. now this blank-flash from ODESSA from the website: https://mirrors.lolinet.com/firmware/moto/odessa/
it's having problems because it was supposed to be just from odessa but then there's an error from SAHARA in the case it was supposed to be just odessa and RETAIL but it's ok I'll wait for someone to help the people from brazil because there are a bunch of people with this problem on the MOTO G9 PLUS-XT -2087-1 ODESSA-RETAIL with a blankflash like that people wouldn't leave XDA all day thanking people. But anyway, thanks to everyone who is trying to help others. in a few more days I'll teach people on youtube how to put in EDL mode and install the qccom 9008 and how to do EDL on the motherboard of any cell phone without damaging the device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi i was bought phone from ebay which was stuck in hboot, but when i was receive phone battery was completely flat.
And now i have problem i cant charge it, just red led blinking twice, i was think maybe charging port is damage, after replace charging port still same
Phone connected to computer is connecting and disconnecting every 5 sec this device Qualcomm HS-USB QDLoader 9008
What i can due with this phone ?? Is any chance for repair ?
Like i mention phone before battery run out was stuck in hboot, now is dead
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here was a quick and easy Google search I did given the information you provided. Many results to get you started. HTC One M8 Qualcomm HS USB QDLoader 9008
LightWeight_CO said:
Here was a quick and easy Google search I did given the information you provided. Many results to get you started. HTC One M8 Qualcomm HS USB QDLoader 9008
Click to expand...
Click to collapse
Is nothing about it for m8
You are looking for Qualcomm HS-USB QDLoader 9008. There are plenty of links that discuss, instruct and walk you step by step to resolve your issue. It is not an easy fix. But you need to research to see if you think you can do it yourself. Otherwise you should consider a buying a different device.
Google is your friend.
LightWeight_CO said:
You are looking for Qualcomm HS-USB QDLoader 9008. There are plenty of links that discuss, instruct and walk you step by step to resolve your issue. It is not an easy fix. But you need to research to see if you think you can do it yourself. Otherwise you should consider a buying a different device.
Google is your friend.
Click to expand...
Click to collapse
I was work with qfil but give me error all the time
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
w QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
w QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
Try formatting your sdcard to NTFS file system instead of exfat. If that does not work., your device may not be unbrickable. time to upgrade.
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
UP
mohamed_ragab09 said:
UP
Click to expand...
Click to collapse
Press volume up and then connect to pc.
Starchm said:
Press volume up and then connect to pc.
Click to expand...
Click to collapse
i tried but the phone is not detected and i get a message that the usb not recognized or malfunctioned
mohamed_ragab09 said:
i tried but the phone is not detected and i get a message that the usb not recognized or malfunctioned
Click to expand...
Click to collapse
Do u see so much drives in windows? Anyway u cant brick the phone fully...
Starchm said:
Do u see so much drives in windows? Anyway u cant brick the phone fully...
Click to expand...
Click to collapse
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
mohamed_ragab09 said:
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
Click to expand...
Click to collapse
Flash the rom on his pc probably? Or disable win10 driver signature ****
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
I was flashing rom on my phone(downloaded from mi website) and somehow it got bricked, it was an error Mismatching image and device. The phone now wont turn on, can't boot into recovery or fastboot, no led when charging. When connected to PC attempting to flash(an older rom), now when I try and flash I will get errors including:
sahara read end error 20
cannot receive hello packet
cannot receive hello packet miflash is trying to reset
grab lkmsg log
Object reference not set to an instance of an object
Device manager detects device as Qualcomm HS-USB QDLoader 9008(COM20)
Tried looking around the forums but so far no progress
SOLVED:
Apparently I got the model of my phone wrong, it's actually a Redmi Note 4G, if you look at the mi website the two phones(Redmi Note and Redmi 1S) look identical. So all I did afterwards was install the CORRECT rom for the phone and flashed using MiFlash 2014.05.09.0. Make sure Device SIgnature Enforcement is disabled, the latest MiFlash couldn't detect the device but using a fallback version it was detected as something else and it somehow worked. During this, QD Loader 9008 also changed to 9006. Once it's done, just unplug then hold power button and pray everything worked out. GOOD LUCK BOIS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
savemepls66 said:
I was flashing rom on my phone(downloaded from mi website) and somehow it got bricked, it was an error Mismatching image and device. The phone now wont turn on, can't boot into recovery or fastboot, no led when charging. When connected to PC attempting to flash(an older rom), now when I try and flash I will get errors including:
sahara read end error 20
cannot receive hello packet
cannot receive hello packet miflash is trying to reset
grab lkmsg log
Object reference not set to an instance of an object
Device manager detects device as Qualcomm HS-USB QDLoader 9008(COM20)
Tried looking around the forums but so far no progress
SOLVED:
Apparently I got the model of my phone wrong, it's actually a Redmi Note 4G, if you look at the mi website the two
phones(Redmi Note and Redmi 1S) look identical. So all I did afterwards was install the CORRECT rom for the phone and flashed using MiFlash 2014.05.09.0. Make sure Device SIgnature Enforcement is disabled, the latest MiFlash couldn't detect the device but using a fallback version it was detected as something else and it somehow worked. During this, QD Loader 9008 also changed to 9006. Once it's done, just unplug then hold power button and pray everything worked out. GOOD LUCK BOIS
Click to expand...
Click to collapse
Thank you brothher...
I am OK this way. Sorry for poor English.
Hi guys, I bricked my V35 last week and although it's software, LG did tell me if they find out that it's HW issue the warranty is void. The phone has a couple small lines in the back nothing major so that's why I didn't mail it yet.
Can someone give me the QFIL rawprogram0.xml and the necessary files to reflash it ? I have the firmware but cannot extract it using any current extraction tool including FWUL. ANy suggestion would be appeciated. Also if LG V35 ROM isn't doable can I flash it with an equivalent like LG V30S ?
i can help you
write on pm
i can fix via octoplus medusa pro
I Unbrick LG V35 OK. First in the world !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How did you do that I'm trying to root lg v35 att.
nellatl said:
How did you do that I'm trying to root lg v35 att.
Click to expand...
Click to collapse
He probably used a jtag box and the infamous 9008 qdloader mode.
fastoot mode loop and cant get into download mode. lg v35
loveiem said:
i can help you
write on pm
i can fix via octoplus medusa pro
Click to expand...
Click to collapse
Can you please send me a message and help me with mine? i am in a fastboot loop and i cant get into download mode. I would greatly appreciate it.
i know someone with octiplus fom 4pda
he can help
AT&T LG V35 is stuck in boot loop. Bootloop error! AT&T LG V35 stuck in boot loop after charging. Starts and hangs on ATT logo and wont power off. I can access factory reset, download mode and phone info screen thats it. I need to get my data off this brick! If any one has found any kind of fix for this besides a factory reset.
Would an EDL cable in 9008 mode work?
Hi guys
I need help MY oneplus 5t IS HARDBRICK MODE, or EDL mode, Qdloader 9008.
I used MSM Download Tools but no flash, appeared only sahara communication hadbrake or sahara communication failed.
I need the .ops files, I saw in some way these extracted files could get the necessary files
https://github.com/bkerler/oppo_decrypt
I found this tool, but I do not know how they work
If anyone can help me
thanks
https://youtu.be/G_wOo83869o
Erro my oneplus 5t
edsmat said:
https://youtu.be/G_wOo83869o
Erro my oneplus 5t
Click to expand...
Click to collapse
Has anyone experienced this?
Can you help with something?
edsmat said:
Has anyone experienced this?
Can you help with something?
Click to expand...
Click to collapse
I noticed that after you click on "Start" the tool keep saying "Connected" / "N/A" and that during a few seconds it doesn't show up in device manager as well. Maybe your USB cable/port is defective?
Some_Random_Username said:
I noticed that after you click on "Start" the tool keep saying "Connected" / "N/A" and that during a few seconds it doesn't show up in device manager as well. Maybe your USB cable/port is defective?
Click to expand...
Click to collapse
Thank you for your reply.
It may be that, but strange that other people are the same problem.
and in version 3.0 test of 3t, it recognizes the device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://github.com/bkerler/oppo_decrypt
I was thinking of extracting .ops file, using oppo decrypt, I just can not
edsmat said:
Thank you for your reply.
It may be that, but strange that other people are the same problem.
and in version 3.0 test of 3t, it recognizes the device
https://github.com/bkerler/oppo_decrypt
I was thinking of extracting .ops file, using oppo decrypt, I just can not
Click to expand...
Click to collapse
Odd, because it runs fine on my machine. Just curious is your cpu an AMD one? Asking as I saw on other threads persons having issues with the tool on machines with AMD CPUs while it ran fine on machines with Intel ones.
Some_Random_Username said:
Odd, because it runs fine on my machine. Just curious is your cpu an AMD one? Asking as I saw on other threads persons having issues with the tool on machines with AMD CPUs while it ran fine on machines with Intel ones.
Click to expand...
Click to collapse
my machine is intel, unbrick is working oneplus one, oneplus 3t, oneplus 6t my actual device, do you change usb flex.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.
SOURCE:https://forum.xda-developers.com/one...ional-t3798892
Could you solve it?