Related
Hi together,
since my home button is broken, i need to flash the Stock-ROM (sending in the device for repair).
This not an easy task, since a cannot use CWM to flash, as the borken button is needed there.
ODIN would be another way, but i could not get it working under Win 8.1 x64 (tried two different usb cables, various driver versions, signature check disabled etc.. nothing worked for me - really hate this **** now )
I managed to flash a Touch Recovery via Terminal though, so i can flash zip's again.
Is there any flashable version of the european Stock-ROM? I found onr, but links are dead there .
I greatly appreciate any help.
Greets
//EDIT: Ok, seems as its actually not possible to use ODIN under Win 8.1 atm, due to unsolved driver issues.
Ok, solved. i finally installed Win7 on a seperate partition and flashed it with ODIn thiss way.
Btw: It seems to be possible to get in Download or Recovery Mode when you are stuck in Bootloop:
Enter
Code:
adb reboot download
or
Code:
adb reboot recovery
when your phone is not bootet, but battery is loading (battery animation visible, so it actuaööy has bootet, but not the ROM itself, only bootloader.)
Interestengly, this works, while calling the commands in the adb shell itself, does only work when you are rootet (which is likely not the case e..g. when you go back to stock rom, and end in a bootloop after flashing it).
Greets
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
I'm stuck with trying to get ArrowOS to work on my Pixel 2 XL Taimen.
Bootloader is unlocked, I have flashed TWRP 3.6.0_9-0-taimen onto the Pixel.
At some point I was able to move Arrow v12 and GAPPS zip files to the pixel by dragging the files to the phone in Windows. I was able to see the zip files in windows on the phone, but could not see them in TWRP, all the folders had lots of mixed up numbers. Eventually I found the files with File Manager in TWRP, but couldn't do anything with them. I think I have since wiped everything and can't find them now.
on my pc in SDK/platform tools, I can CMD adb devices and see the phone, but if I run fastboot devices, nothing. I have the Google USB driver activated and can see it as an Android Device in Device Manager on windows.
All I can do on the phone is boot to bootloader and get into recovery which takes me to TWRP. If I try to ADB Sideload the ArrowOS zip file to the phone (using sideload in TWRP at the same time) the system just hangs.
Did I just brick my phone? any suggestions on what i can do?
Restore your unit using the full stock ROM package - NOT OTA - from Google. That will get the unit working. To install any ROM you need to do the following.
1. Remove fingerprints and pin numbers from the device. This should disable encryption.
2. In the command prompt boot into TWRP. Do not install unless you want a bootloop.
3. Install Arrow.
As an alternative to 1 above, a USB flash drive with the USB adapter Google includes in the box will also work.
To expand on what @Strephon Alkhalikoi said:
1) TWRP seems unable to handle the encryption used by Android 12, so you probably can't download the new rom to the phone - however sideload should work
2) You should have the baseband and bootloader from the last stock rom installed
3) fastboot devices should work when the phone is in bootloader mode, whereas adb devices works in recovery
4) you may have to format data in TWRP, to clear any incompatible encryption - note that this will delete all the files on your phone
I did the alternative option with a usb drive...worked perfect...thank you so much for helping me!!!
One question...this is my first time installing a custom ROM. I really wanted to try out Android 12 and it is working really well. But my question is, from a security perspective, how secure am I in this mode? not like physical security if someone stole my phone and tried to get in, but secure from online hacking? Will security updates come to me OTA? or will I have to load them from ArrowOS site? I've been on the unsuported updates of Android 11 for a year, so I'm guessing more secure than that?
also, do the Android 12 widgets not come in this ROM, or the GApps ROM? is there a way to get them installed?
bguzz said:
One question...this is my first time installing a custom ROM. I really wanted to try out Android 12 and it is working really well. But my question is, from a security perspective, how secure am I in this mode? not like physical security if someone stole my phone and tried to get in, but secure from online hacking? Will security updates come to me OTA? or will I have to load them from ArrowOS site? I've been on the unsuported updates of Android 11 for a year, so I'm guessing more secure than that?
Click to expand...
Click to collapse
bguzz said:
also, do the Android 12 widgets not come in this ROM, or the GApps ROM? is there a way to get them installed?
Click to expand...
Click to collapse
I believe the ArrowOS developers are working on adding OTA functionality. In the meantime you can flash an update using the USB stick, or you can use adb sideload commands. If you are worried about people accessing your data, a pin and fingerprint lock does wonders.
Which widgets? If you mean the widgets found on the Pixel 6 series, those are exclusive to the Pixel devices: custom ROMs won't have them unless the developer pulls copies from a Pixel 6 / 6 Pro and adds them.
Makes sense. Thank you again.
One thing to make sure if you care about security, is that SElinux is set to enforce. This is an essential security feature that is pretty tedious for the dev to get working, so sometimes it is left as permissive.
Unfortunately, I don't know which roms have enforcing SElinux. If it doesn't say so in the rom's thread, you'll have to install and check.
bguzz said:
If I try to ADB Sideload the ArrowOS zip file to the phone (using sideload in TWRP at the same time) the system just hangs.
Click to expand...
Click to collapse
Try connecting the Pixel 2 XL through a USB hub. I had the same problem in recovery mode and the USB hub solved it.
This will not work if your phone bricked after updating to Android 12. You should use the MSM in this case. This guide details downgrading to an earlier version of Android 11 FROM a newer Android 11. You have been warned.
This evening after updating my phone (installing to inactive slot + flashing with Magisk as I have done many times before), I restarted only to receive a Qualcomm CrashDump.
Unlike what I've read online, my one seemed to be a bit more severe. I could not boot into recovery mode (black screen; had to power phone off) and entering Fastboot did not fix the issue. After spending several hours reading through XDA, Stack Overflow, various other sites etc I finally managed to get it fixed. Not only that, but I kept ALL my data AND my root. It's like nothing ever happened.
The issues I faced:
- Mistakenly had USB debugging off (which cannot be enabled when your phone is soft bricked). This made using ADB for initial diagnostics virtually impossible
- Recovery mode showed a black screen; not accessible.
- Installing TWRP, only to find my device passcode (PIN) wasn't allowing me to decrypt my phone data so I could make a backup
- My phone was buggered
How I solved it: Given recovery mode was blank, I flashed TWRP to my recovery drive via Fastboot to bring it back. Because USB debugging was OFF and TWRP wasn't decrypting my data (meaning I couldn't back up any data or download the ROM to my internal storage without wiping it), I activated ADB Sideload within TWRP and then used this to downgrade my version of OxygenOS! After a reboot I received the Qualcomm error one more time, before it continued to boot into OxygenOS with all my data intact.
Your bootloader should already be unlocked. If it isn't, chances are you will be saying goodbye to your data
These steps may not work for everybody, but I wanted to give back what I learned from this, and it was rather unconventional and against the grain of what others have suggested. With that said, do so at your own risk.
This is a simple guide. I will explain the tools you will need and how to fix the issue. Anything beyond that (i.e. installing SDK platform tools) can be researched.
This is written assuming you are on Windows, although the steps are generally quite similar.
Tools Needed:
A computer to download and install:
- SDK Platform Tools/ADB (https://developer.android.com/studio/releases/platform-tools)
- TWRP for OnePlus 8 Pro (https://forum.xda-developers.com/t/...wrp-for-oneplus-8-8pro-official-beta.4341707/)
- OnePlus 8 Pro Drivers (You will need this installed if it isn't already for your phone to appear in SDK Platform Tools. You may need to disable driver signature enforcement on Windows 10)
- The version of OxygenOS you were running before the CrashDump occurred (https://forum.xda-developers.com/t/oneplus-8-pro-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4084315/)
Steps to take - Initial Setup and Installation of TWRP:
1. Download everything above and then install SDK Platform Tools + OnePlus 8 Pro Drivers if you don't already have them.
2. Enter Fastboot mode on your phone and then connect it to the computer.
3. Ensure the TWRP .img file is in the same directory as your SDK Platform Tools install
4. Open up command prompt with SDK Platform Tools installed and type in
Code:
fastboot devices
Confirm your device ID appears along with "fastboot" beside it.
4. If the device is being recognised, we're ready to install TWRP. Note: Remember your Bootloader must be unlocked for the next steps. While in Fastboot mode, your phone will tell you if your bootloader is locked or unlocked. Now that we've confirmed it is unlocked, Type in:
Code:
fastboot flash recovery_a twrpname.img
followed by:
Code:
fastboot flash recovery_b twrpname.img
5. You can now boot into recovery mode! On your phone, use the volume keys to navigate and choose Recovery so you can enter TWRP
Downgrading to an older version:
When I installed TWRP, I was horrified to see that I couldn't decrypt my phone with my pin code. Apparently this is an ongoing problem with TWRP and the ability to decrypt your phone data varies between devices and builds of TWRP.
1. Now that you have entered TWRP, enter the "Advanced" settings and enable "ADB Sideload".
2. On the computer, type in
Code:
adb devices
. You should see your device appear.
3. Ensure the OxygenOS file is in the same directory as your SDK Platform Tools install
4. Type in
Code:
adb sideload updatename.zip
and let it flash to your phone.
And that's it! Reboot your phone. You may receive the Qualcomm error one last time, so kiss that sucker goodbye with a final reboot (I pressed power + volume up but then it continued to boot as normal; much to my surprise) and you should be good to go.
Hope this helps. This is my first ever guide, but my phone bricked itself this afternoon and it took me 3-4 hours of research to figure out what to do. This community played its role in helping me, and I'm sure someone out there will appreciate this information - definitely wanted to give back. I didn't see any information like this outside of wiping the phone entirely... I'm pretty stubborn and didn't want to do that.
This is definitely a "dirty flash", although given I couldn't even boot into the updated version, I would say a downgrade is definitely just fine in this instance.
I assume that you where using Android 11?
Because in the current situation with android 12 and hard bricking your phone with fastboot flashing this guide is potentially dangerous. As far as i know you should not flash twrp to android 12 right now.
Please correct me if i mixed things up here or if i am wrong. Its better to loose data and use MSM if you are concerned.
You might wanna include this guide in case someone needs to read it before doing anything.
[GUIDE] How to Avoid Killing Your OnePlus 8 Pro / 8T / 9R with OxygenOS 12 / ColorOS 12
As You can see, recently we started seeing more and more threads complaining about OxygenOS 12 killing people's devices. I lost my 8 Pro the same way few months ago and we finally know what caused this! ANSWER - THE BOOTLOADER! Massive Update...
forum.xda-developers.com
Anyway thanks for your effort here.
xtcislove said:
I assume that you where using Android 11?
Because in the current situation with android 12 and hard bricking your phone with fastboot flashing this guide is potentially dangerous. As far as i know you should not flash twrp to android 12 right now.
Please correct me if i mixed things up here or if i am wrong. Its better to loose data and use MSM if you are concerned.
You might wanna include this guide in case someone needs to read it before doing anything.
[GUIDE] How to Avoid Killing Your OnePlus 8 Pro / 8T / 9R with OxygenOS 12 / ColorOS 12
As You can see, recently we started seeing more and more threads complaining about OxygenOS 12 killing people's devices. I lost my 8 Pro the same way few months ago and we finally know what caused this! ANSWER - THE BOOTLOADER! Massive Update...
forum.xda-developers.com
Anyway thanks for your effort here.
Click to expand...
Click to collapse
Thank you and you're right. I've added this warning to the top of the post!
Hey, I have rooted a few of these and helped a few people as well and feel confident I can help most anyone with the problems they face rooting this beast. Also I'm posting this to have a place I can send people I help so I don't have to keep retyping stuff. From what I can tell the steps to root this phone are almost the same as the last model.
For now I will just post rough steps and use this as a place to provide support to people.
STEPS: (Rough guide/ please use other sources of information also)
1.) Fully update your phone
2.) Download the bootloader unlock app from asus official website. Also download and install Magisk. I recommend canary release.
3.) Get a patched boot.img or learn with a search engine how to extract the boot.img from payload.bin which can be found inside the large firmware zip files on the asus website (same link as unlock app but click firmware). Follow a tutorial.
4.) Turn on adb settings, and roboot into fastboot. adb reboot bootloader
For me for windows I needed to download fastboot drivers and go to device manager and install/update them.
5.) Unlock the bootloader with: fastboot flashing unlock
6.) Flash the patched boot image with: fastboot flash boot magisk_patched####.img
7.) Download safteynetfix and go to Magisk -> Modules and install safteynetfix.zip. Then go to Magisk -> Settings and enable Zygisk, and Enforce Denylist. Then turn on airplane mode and click on Configure deny list. add apps that are not working with root here, then delete their storage in App->Settings and reboot, remove airplane mode, and force close the apps in question.
For example select Show -> system apps. and add Google Play Store and Google play services to the deny list. Then go to App->Settings and delete both of those app's storage. Then when you reboot and remove airplane mode and force close google play and reopen it and go to Google Play -> Settings -> About you should see at the bottom "Device is certified".
If this last step does not show certified you did something wrong or I described it bad, check with a tutorial how to set up safteynet + configure deny list. Or post here and I will help you.
FINAL NOTE: After this the OTA updates that ASUS pushes will not be downloaded by our phone. We need to go to the same website we downloaded the unlock app from and we need to download the firmware files (WW for me) and put them in /sdcard/UL-ASUS-Al2201....zip and reboot. We then need to repeat the root process and the Magisk module process. Also I think we need to do this for every update along the way and cannot skip to the most recent update but not sure.
Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?
leathan said:
Hey, I have rooted a few of these and helped a few people as well and feel confident I can help most anyone with the problems they face rooting this beast. Also I'm posting this to have a place I can send people I help so I don't have to keep retyping stuff. From what I can tell the steps to root this phone are almost the same as the last model.
For now I will just post rough steps and use this as a place to provide support to people.
STEPS: (Rough guide/ please use other sources of information also)
1.) Fully update your phone
2.) Download the bootloader unlock app from asus official website. Also download and install Magisk. I recommend canary release.
3.) Get a patched boot.img or learn with a search engine how to extract the boot.img from payload.bin which can be found inside the large firmware zip files on the asus website (same link as unlock app but click firmware). Follow a tutorial.
4.) Turn on adb settings, and roboot into fastboot. adb reboot bootloader
For me for windows I needed to download fastboot drivers and go to device manager and install/update them.
5.) Unlock the bootloader with: fastboot flashing unlock
6.) Flash the patched boot image with: fastboot flash boot magisk_patched####.img
7.) Download safteynetfix and go to Magisk -> Modules and install safteynetfix.zip. Then go to Magisk -> Settings and enable Zygisk, and Enforce Denylist. Then turn on airplane mode and click on Configure deny list. add apps that are not working with root here, then delete their storage in App->Settings and reboot, remove airplane mode, and force close the apps in question.
For example select Show -> system apps. and add Google Play Store and Google play services to the deny list. Then go to App->Settings and delete both of those app's storage. Then when you reboot and remove airplane mode and force close google play and reopen it and go to Google Play -> Settings -> About you should see at the bottom "Device is certified".
If this last step does not show certified you did something wrong or I described it bad, check with a tutorial how to set up safteynet + configure deny list. Or post here and I will help you.
FINAL NOTE: After this the OTA updates that ASUS pushes will not be downloaded by our phone. We need to go to the same website we downloaded the unlock app from and we need to download the firmware files (WW for me) and put them in /sdcard/UL-ASUS-Al2201....zip and reboot. We then need to repeat the root process and the Magisk module process. Also I think we need to do this for every update along the way and cannot skip to the most recent update but not sure.
Click to expand...
Click to collapse
Sorry, I messed with the reply: it's my previous post.
fux1976 said:
Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?
Click to expand...
Click to collapse
I cant really help as I can't reproduce those problems. My phone was originally WW, but did you try to apply the non latest update? Then work your way up to 160?
fux1976 said:
Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?
Click to expand...
Click to collapse
To answer some other stuff, did you try looking in Device manager and maker sure your android device/asus rog is listed without an exclamation? I was having similar issues on windows until I installed the usb drivers. You should be able to run fastboot devices from within the bootloader menu.
leathan said:
I cant really help as I can't reproduce those problems. My phone was originally WW, but did you try to apply the non latest update? Then work your way up to 160?
Click to expand...
Click to collapse
Hi there! I flashed raw .134 and then the magisk patched boot .img as dedcribed in one forums guide, then tried to upgrade to .160 when I saw it on the asus support page. I was thinking of using edl and hard reset the phone and start again (in the next few days as it take times). I found a guide and tools (don't know if I can post the external link here). Do you think that could work? I downloaded raw .160 from the asus site (then i'll reflash the magisk patched boot).
To be honest it tickles me to try out this things (hoping not to end up with a brick of course)
leathan said:
I cant really help as I can't reproduce those problems. My phone was originally WW, but did you try to apply the non latest update? Then work your way up to 160?
Click to expand...
Click to collapse
Hi there! I flashed raw .134 and then the magisk patched boot .img as dedcribed in one forums guide, then tried to upgrade to .160 when I saw it on the asus support page. I was thinking of using edl and hard reset the phone and start again (in the next few days as it take times). I found a guide and tools (don't know if I can post the external link here). Do you think that could work? I downloaded raw .160 from the asus site (then i'll reflash the magisk patched boot).
To be honest it tickles me to try out this things (hoping not to end up with a brick of course
leathan said:
To answer some other stuff, did you try looking in Device manager and maker sure your android device/asus rog is listed without an exclamation? I was having similar issues on windows until I installed the usb drivers. You should be able to run fastboot devices from within the bootloader menu.
Click to expand...
Click to collapse
I fortunately have several pcs so i switched to the one with no drivers issues. As written I can only use fastboot commands when the phone is in fastbootd mode (sort of recover looking screen). The bootloader mode (one line, capital letters) is not recognized by pc..that's why I was thinking about EDL and reflashing the first level boot. Is it hazardous?
fux1976 said:
Hi there! I flashed raw .134 and then the magisk patched boot .img as dedcribed in one forums guide, then tried to upgrade to .160 when I saw it on the asus support page. I was thinking of using edl and hard reset the phone and start again (in the next few days as it take times). I found a guide and tools (don't know if I can post the external link here). Do you think that could work? I downloaded raw .160 from the asus site (then i'll reflash the magisk patched boot).
To be honest it tickles me to try out this things (hoping not to end up with a brick of course
I fortunately have several pcs so i switched to the one with no drivers issues. As written I can only use fastboot commands when the phone is in fastbootd mode (sort of recover looking screen). The bootloader mode (one line, capital letters) is not recognized by pc..that's why I was thinking about EDL and reflashing the first level boot. Is it hazardous?
Click to expand...
Click to collapse
I would continue to try to get my PC to recognize my Phone in bootloader mode using the drivers I linked. After helping 2 people who had windows, on both of their machines, I had to install the drives. On linux is just worked.
Also the raw image that I linked is of 93 so you should have needed to download 95, 97, 134, and 160 from asus. Then after 160 I repatched the boot img and re-rooted.
There is another person who said after tencent -> WW she was able to update to 134 where she had some problem. But I don't know how to reproduce that stuff Hope you figure it out though.
leathan said:
I would continue to try to get my PC to recognize my Phone in bootloader mode using the drivers I linked. After helping 2 people who had windows, on both of their machines, I had to install the drives. On linux is just worked.
Also the raw image that I linked is of 93 so you should have needed to download 95, 97, 134, and 160 from asus. Then after 160 I repatched the boot img and re-rooted.
There is another person who said after tencent -> WW she was able to update to 134 where she had some problem. But I don't know how to reproduce that stuff Hope you figure it out though.
Click to expand...
Click to collapse
Phone looks certified, country WW, safetynet passed and upgraded to .160. Only 2 problema left: voice dictation of GBoaed and Android auto not working.
I tried several ways but they didn't solve. Voice dictation worked and then stopped: I guess something interferes... Android Auto app crashes although phone connects to car and is recognised.
Very strange behaviour...
Do you have any idea on how to reflash last .160 zip without twrp? Once installed it gets ignored by system when saved in home directory...
Everything else is working properly.
Isn't Android Auto no more (i.e discontinued).....?
elmor0 said:
Isn't Android Auto no more (i.e discontinued).....?
Click to expand...
Click to collapse
what?!? where did you hear that? It'just something causing problems (compatibility issues with app or setting: magisk, modules, adaway, skipad, disabled system apps and so on). If I could manage to reflash the stock rom it'll work again (I hope)
fux1976 said:
Hi! Thank you very much for sharing and helping. I have Tencent edition, from CN to WW, but a couple of things don't work properly:
- Android Auto does not communicate with my car (phone detected and bluetooth connected) bit app stops.
- Gboard voice dictation does not work (google assistant yes)
Country is WW. Safetynet passed. Play certified.
..I followed your guide.
I flashed the posted xda raw throuh fastboot and the the Magisk patched .img
When I tried TO apply latest updates (160) the Same message error appeared.
There is spmething strange (or are least I think It strange):
When I start in "fastboot" (black screen with capital text single line) my device isn'r recognized by PC. Then I switch to "recovery" and then to "fastboot" and a menu (several lines) with title "fastbootd" appears and the phone is recognized by PC (fastboot devices). If I choose bootloader the first screen appears.
I tried to reflash the raw but either the phone isn't recognized or a message appears on the cmd window showing "not rog 6" (more or less) and stops. But the phone is recognized everywhere as rog6...
I miss my broken rog2, it was much easier to root
Do you have any idea what's going on? Or when the twrp boot will be released so that I can brutally flash any zip?
Click to expand...
Click to collapse
Keep spamming flashall_aft.cmd until it works or try flashing other raw.
This worked for me if your able to get fastboot devices listed in adb firstly
finallau said:
Keep spamming flashall_aft.cmd until it works or try flashing other raw.
This worked for me if your able to get fastboot devices listed in adb firstly
Click to expand...
Click to collapse
I only have raw for .143 but I updated to .160*...can I use the previous version or do I get bricked? I don't trust anti roll back mechanism. I can live with this 2 "limitations" waiting for twrp and then be able to flash zip with no hassle.
*I downloaded source code from the Asus site but not sure how to use it (and unzipped is around 10 gb )
Thank you for this! I've been out of the root game for years but noticed with your post that I can hide root from Google Pay and my banking apps, so thinking of trying this. One question though - you mentioned that official updates need to be manually downloaded and the phone re-rooted. Would this wipe the phone each time?
fastboot driver doesnt support win64
Will the phone do a factory reset after unlocking the bootloader?
Anyone know if I root my phone following these instructions, will it factory reset or wipe my data partition? Sorry it's been a while since I rooted any phone, and I am excited about going this route
MrKioFLow said:
Anyone know if I root my phone following these instructions, will it factory reset or wipe my data partition? Sorry it's been a while since I rooted any phone, and I am excited about going this route
Click to expand...
Click to collapse
Yes, if you unlock the bootloader using the bootloader unlock app (which is a step that is missing in the original post), your phone will perform factory reset.
Troubleshooting
Once you boot into the bootloader with the adb reboot bootloader command, stay on the screen with the green START. Do not navigate to the fastbootd.
Use the side USB port to connect to your computer - not the bottom one.
Run the adb and fastboot commands in Command Prompt as Administrator.
Before you reboot into bootloader, remove Lock screen in Settings.
If you execute fastboot flashing unlock and you got FAILED (remote: 'permission denied'), just ignore it.
It's always better to install the latest updates, then download the firmware to your PC from ASUS Webpage and extract the boot.img and patch it in Magisk in the phone using this tutorial.
Thanks for the guide! Should add that you have to use the side port for fastboot to see the device. Was stuck for a while trying to figure out why neither mac nor pc couldn't find it when it was in bootloader mode - it was because I was using the bottom port lol!
Also if you want to disable verity and verification for the verified boot images, you have to do for both vbmeta.img and vbmeta_system.img. Didn't boot for me until I did that, and had to do an additional factory reset from recovery because of this.