Related
I was on 8.1 with Flash Kernel installed using images...I wanted to get back to stock...so unchecked OEM Unlocking in Developer Options, went to bootloader and locked bootloader using fastoboot flashing lock..and now I am getting "Can't find valid operating system. The device will not start". I can't unlock the bootloader now as I unchecked OEM unlocking in Developer Options and can't flash factory images also as it says Flashing is not allowed in Lock State, Did I brick the device?
Update: I have returned my device to Google and they processed a replacement
i am just curious, how were planning on flashing a rom with locked bootloader?
ram4ufriends said:
I was on 8.1 with Flash Kernel installed using images...I wanted to get back to stock...so unchecked OEM Unlocking in Developer Options, went to bootloader and locked bootloader using fastoboot flashing lock..and now I am getting "Can't find valid operating system. The device will not start". I can't unlock the bootloader now as I unchecked OEM unlocking in Developer Options and can't flash factory images also as it says Flashing is not allowed in Lock State, Did I brick the device?
Click to expand...
Click to collapse
Yea, I think you may have turned it into a fancy paperweight. Been there, done that. You should have waited to uncheck OEM unlocking until after you locked the bootloader, which wiped your phone. About the only thing I can suggest is to try and run Deuces script to see if you can rescue your device. Best of luck to you.
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
ram4ufriends said:
I was on 8.1 with Flash Kernel installed using images...I wanted to get back to stock...so unchecked OEM Unlocking in Developer Options, went to bootloader and locked bootloader using fastoboot flashing lock..and now I am getting "Can't find valid operating system. The device will not start". I can't unlock the bootloader now as I unchecked OEM unlocking in Developer Options and can't flash factory images also as it says Flashing is not allowed in Lock State, Did I brick the device?
Click to expand...
Click to collapse
Sorry for your loss, but you indeed have a fancy paperweight.
However I wonder if there isnt the QCom USB mode or something like that that exist on older devices, where you can access the phone partitions at a lower level and then restore whatever partitions is broken.
Paradoxxx said:
Sorry for your loss, but you indeed have a fancy paperweight.
However I wonder if there isnt the QCom USB mode or something like that that exist on older devices, where you can access the phone partitions at a lower level and then restore whatever partitions is broken.
Click to expand...
Click to collapse
With the new partitioning no idea if it still works. But OP has nothing to loose anyway i guess.
gee2012 said:
With the new partitioning no idea if it still works. But OP has nothing to loose anyway i guess.
Click to expand...
Click to collapse
Yeah at that point... Not sure what is Google saying about that. Maybe RMA it ?
Saying something like that should work.
"I was using my device, and suddenly it froze and nothing responded. It suddenly rebooted and shown this error message."
gee2012 said:
With the new partitioning no idea if it still works. But OP has nothing to loose anyway i guess.
Click to expand...
Click to collapse
Sorry didn't get, What do you mean by OP has nothing to loose?
Badger50 said:
Yea, I think you may have turned it into a fancy paperweight. Been there, done that. You should have waited to uncheck OEM unlocking until after you locked the bootloader, which wiped your phone. About the only thing I can suggest is to try and run Deuces script to see if you can rescue your device. Best of luck to you.
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
How did you recover your devices from that state earlier when you did the same thing?
ram4ufriends said:
Sorry didn't get, What do you mean by OP has nothing to loose?
Click to expand...
Click to collapse
since your phone is now essentially a brick, you can try just about anything without worry of bricking your phone.
ram4ufriends said:
I was on 8.1 with Flash Kernel installed using images...I wanted to get back to stock...so unchecked OEM Unlocking in Developer Options, went to bootloader and locked bootloader using fastoboot flashing lock..and now I am getting "Can't find valid operating system. The device will not start". I can't unlock the bootloader now as I unchecked OEM unlocking in Developer Options and can't flash factory images also as it says Flashing is not allowed in Lock State, Did I brick the device?
Click to expand...
Click to collapse
You cannot flash full images, but you can still flash OTAs... download the full OTA instead, and install (sideload) it from the stock recovery. Be sure to select the SAME build number you were on to begin with- eg. If you were on 8.1, use the 8.1 OTA. There will be a mode there for "Apply update from ADB". You put the phone into "sideload mode" and then send the OTA to the phone via adb. This will work regardless whether you have usb debugging enabled or not. Follow the directions given on the included link.
ram4ufriends said:
How did you recover your devices from that state earlier when you did the same thing?
Click to expand...
Click to collapse
I didn't. They are still paperweights sitting in a drawer!
I got the same message yesterday after doing... God knows what. I can't even remember what went wrong.
My first thought was to flash a factory image. But it didn't helped at first. Probably, because i was trying to flash another factory image and not the one that came as stock on my phone.
So if you don't remember, which image it was, try all of them Hopefully, you'll get your phone booted again.
My first reaction was, is this april fools day? Is this an xda style joke? unchecked oem unlock?
dontbeweakvato said:
My first reaction was, is this april fools day? Is this an xda style joke? unchecked oem unlock?
Click to expand...
Click to collapse
Meh...you know how it is bro....**it happens!
Call google and just tell them your device wont boot all of a sudden; they will probably ask you to factory restore in the recovery, say the phone wont get past the google image. They will RMA that boy for you. You totally bricked. For future reference if you unlock the bootloader, dont waste your time trying to lock it again. Should have just fastboot flashed a factory image in the bootloader and called it a day. Having a unlocked bootloader doesn't effect you in anyway negatively.
ArminasAnarion said:
Call google and just tell them your device wont boot all of a sudden; they will probably ask you to factory restore in the recovery, say the phone wont get past the google image. They will RMA that boy for you. You totally bricked. For future reference if you unlock the bootloader, dont waste your time trying to lock it again. Should have just fastboot flashed a factory image in the bootloader and called it a day. Having a unlocked bootloader doesn't effect you in anyway negatively.
Click to expand...
Click to collapse
Why is this Google's problem? This guy is at fault. Google shouldn't have to pay for it.
This is part of the reason these phones are so expensive.
Sent from my taimen using XDA Labs
mitchdickson said:
Why is this Google's problem? This guy is at fault. Google shouldn't have to pay for it.
This is part of the reason these phones are so expensive.
Sent from my taimen using XDA Labs
Click to expand...
Click to collapse
Well I never said it was the moral thing to do haha; but this guys best bet is to call Google and see if they will RMA it. They RMA'ed my Nexus 6p after the Android 7 twrp brick; and I told them my pone wouldn't boot anymore; they asked me to go to recovery and factory restore, I told them I couldn't boot into recovery and they RMA'ed it. It was my fault for the brick but they didn't care.
ArminasAnarion said:
Well I never said it was the moral thing to do haha; but this guys best bet is to call Google and see if they will RMA it. They RMA'ed my Nexus 6p after the Android 7 twrp brick; and I told them my pone wouldn't boot anymore; they asked me to go to recovery and factory restore, I told them I couldn't boot into recovery and they RMA'ed it. It was my fault for the brick but they didn't care.
Click to expand...
Click to collapse
Did you tell them it was your fault for the brick?
Sent from my taimen using XDA Labs
mitchdickson said:
Did you tell them it was your fault for the brick?
Sent from my taimen using XDA Labs
Click to expand...
Click to collapse
I told them I had an unlocked boot-loader and installed twrp. I had to send them back my old phone and they put a $500 hold on my account, once they received the device and determined the issue was real, they released the hold on my account. In that period of time they could have determined "Oh he bricked the device with twrp" lets charge him $500 for a new one, but they didn't. I mean whats wrong with calling Google and seeing if they will RMA it; sure the OP made a bad mistake but you have not because you ask not.
ArminasAnarion said:
I told them I had an unlocked boot-loader and installed twrp. I had to send them back my old phone and they put a $500 hold on my account, once they received the device and determined the issue was real, they released the hold on my account. In that period of time they could have determined "Oh he bricked the device with twrp" lets charge him $500 for a new one, but they didn't. I mean whats wrong with calling Google and seeing if they will RMA it; sure the OP made a bad mistake but you have not because you ask not.
Click to expand...
Click to collapse
What's wrong with it? You're telling him to call Google and say that for some reason, all the sudden his device won't boot.
This is why I don't fault Verizon for selling bootloader locked phones.
Sent from my taimen using XDA Labs
Moto G7 Play bootloader unlock issues - "bad key", not OTA, no way to roll back?
My plan was to unlock the bootloader before configuring the new phone - just in case I might need it later, then use the phone as out-of-box. I unlocked the bootloader for the new Moto G7 Play, following the official procedure via the Motorola Accounts page, resulting in:
- Fastboot page shows: "flashing unlocked"
- When booting up, I see a black page with the words "bad key", then the phone boots
- The updater sais that the phone is corrupt and no (OTA) updates can be done
- I could not try TWRP, as there is no TWRP for the G7 Play yet (so not sure if flashing would work)
My concerns now are that I will not be able to update the phone, and that the "bad key" issue might cause other problems.
So my plan would be to roll back and lock the phone again, to use it as out-of-box (not worrying about warranty loss that might already have happened - I did accept these terms). However, that does not work, too:
- Locking bootloader requires factory images, which are not available for the G7 Play
- Locking bootloader with fastboot OEM lock will not work without complete images
Any suggestions how bring the phone back to normal? I am disappointed by Motorola, as they officially offer the unlock procedure - which then does not produce the expected outcome, breaks updating, and provides no way to go back? Mind you, I did not apply any "hacks", nothing but the official Motorola unlocking steps.
Thanks for advice
I have the same problem and i cannot fix it.
I tried to get advice from Motorola support - but replies are very generic, referring to the bootloader unlock page (we obviously found that) or to the Motorola Forum (where the answer isn't). Will now just live with the unlocked phone and hope for the opportunity to OTA / update in a while
CoffeeMachineSwitch said:
- When booting up, I see a black page with the words "bad key", then the phone boots
- The updater sais that the phone is corrupt and no (OTA) updates can be done
Click to expand...
Click to collapse
Unlocking any Motorola bootloader will cause the bootscreen to display "Bad Key". This is normal. It is a warning that the bootloader has been unlocked and the phone may not be "safe". Once you root a Motorola phone, it will display "N/A" instead of "Bad Key". Again, this is normal behavior. There are image makers that can replace the "splash" image and "hide" the "N/A", but since this phone doesn't have TWRP yet, you'll have to live with it for now.
As far as not being able to receive OTA updates, I have no knowledge. In my opinion it shouldn't matter that the bootloader has been unlocked...only if you've modified or deleted system files. I've never worried about system updates as I've always rooted and run custom ROMs, or Xposed (which negates eligibility for OTA).
mn1968 said:
Unlocking any
As far as not being able to receive OTA updates, I have no knowledge. In my opinion it shouldn't matter that the bootloader has been unlocked...only if you've modified or deleted system files. I've never worried about system updates as I've always rooted and run custom ROMs, or Xposed (which negates eligibility for OTA).
Click to expand...
Click to collapse
Thanks for clarifying. And yes, learnt from Moto Support that OTA was disabled for 7 generation
CoffeeMachineSwitch said:
Thanks for clarifying. And yes, learnt from Moto Support that OTA was disabled for 7 generation
Click to expand...
Click to collapse
That would be an unfortunate change if true. Prior devices could be unlocked and still get OTA updates. They won't install if certain changes are made but still get notified of updates.
You still can install full ROM using fastboot commands and regain root by patching boot.img from updated ROM
I did it on both G6 and G7
Where did you get the ROM images from. I understand there are no officials?
CoffeeMachineSwitch said:
Where did you get the ROM images from. I understand there are no officials?
Click to expand...
Click to collapse
Have you tried the LMSA tool? It's a tool you download from Motorola. There is a discussion here about it. It has a rescue button with which, I understand that you can download stock images directly from Motorola, but I haven't used it myself.
umbrisle said:
Have you tried the LMSA tool? ....
Click to expand...
Click to collapse
Yes I have - the last time I tried, however, it said that it would not support the G7 (Play) and did not provide any images/ROMs
CoffeeMachineSwitch said:
Yes I have - the last time I tried, however, it said that it would not support the G7 (Play) and did not provide any images/ROMs
Click to expand...
Click to collapse
I was thinking of buying a G7 Play myself, but I am now leaning more towards a G6 Play, because there are more tools available like a working TWRP.
Should've read the thread here before i go buy g7 play, not my phone get softbricked.
Unblocked bootloader successfully following the official doc but failed to install magisk by copying the wrong build number of boot.img of OTA from here mirrors.lolinet.com/firmware/moto
now my g7 says
Code:
failed to load kernel, no Bootable A/B slot,
Failed to book Linux
falling back to fastboot.
I downloaded `RIVER_RETAIL_9.0_PPO29.80-61_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC` which i think this is the right build number when i see error like
Code:
river/retail corrupted
(can't remember exactly, but it's RETAIL not RETUS)
and make my own version of fastboot command stemming from servicefile.xml, still with unlucky.
there is no recovery.img and google has limited resource to make g7 play back to stock orm, i'd like to see if community has any idea or i have to give it to moto to fix it.
========================update=================================
update: i finally get the correct stock ORM which is exactly matching my build number "XT1952-4_CHANNEL_AMZ_9.0_PPY29.105-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC" i was an idiot thinking that mismatch one letter or two will be find, but turns out this is very strict, "second time rooting in my life".
not i has flash all of the original orm into my phone then fastboot reboot works, it give me the original error like
Android Recovery
motorola/channel_retail/channel9/PPY29.105-36/d7abeuser/release-keys
Use volum up/down and power
can't load Android system. Your data may be corrupt.
If you continue to get this message, you may need to perform a factory data
reset and erase all user data stored on this device
=====
Try again
Factory data reset
Click to expand...
Click to collapse
now i need to figure out what to do next
===============update=========
lol, turns out just press Factory data reset will bring the brick back to life!!!!!
just want to post my process for anyone having my issue.
the key point to find the correct build number
umbrisle said:
I was thinking of buying a G7 Play myself, but I am now leaning more towards a G6 Play, because there are more tools available like a working TWRP.
Click to expand...
Click to collapse
.
The G6 Play is really slow, at least the Boost one. I was kind of sorry I bought one to put on Sprint's free unlimited plan. At least Sprint unlocked it for me after 60 days.
Give the G7Play some time, it just came out.
As for you guys complaining of no updates once unlocked, it's not the only phone to require flashing the stock boot.img and relocking to get OTAs.
gedster314 said:
.
As for you guys complaining of no updates once unlocked, it's not the only phone to require flashing the stock boot.img and relocking to get OTAs.
Click to expand...
Click to collapse
Yeah, but there is inconsistency in Motorolas communication, they actively offer the option to unlock the bootloader (with T&C and all) incl. a link to a rollback feature. Which then does not work. So in a scenario where a developer buys the device because it actively offers this features, they dont get what they paid for. Mind you, we are not discussing hacking a device here or jailbraking - we are discussing features that Motorola actively promotes with a dedicated webpage.
wallace_mu said:
was an idiot thinking that mismatch one letter or two will be find, but turns out this is very strict
Click to expand...
Click to collapse
You completely missed the wrong code name "river" in RIVER_RETAIL_9.0_PPO29.80-61_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC it is for another device, while "channel" is the right one
Where did you get the correct Rom from? Thanks
I don't own Moto G7 Play and can not confirm, however this one worked for wallace_mu
wallace_mu said:
XT1952-4_CHANNEL_AMZ_9.0_PPY29.105-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC
Click to expand...
Click to collapse
I could successfully lock / unlock / lock the bootloader...
Unlock: fastboot oem unlock [CODE FROM MOTOROLA]
Lock it down:
* first I have to reflash the 'boot.img' from the correct firmware file - fastboot flash boot boot.img
* then I can lock the bootloader clean again with 'fastboot oem lock'. "bad key" is gone, SafetyNet test passed and OTA is working again.
Unlocking / locking again works by the way also. Maybe this will help?
realsine said:
I could successfully lock / unlock / lock the bootloader...
Unlock: fastboot oem unlock [CODE FROM MOTOROLA]
Lock it down:
* first I have to reflash the 'boot.img' from the correct firmware file - fastboot flash boot boot.img
* then I can lock the bootloader clean again with 'fastboot oem lock'. "bad key" is gone, SafetyNet test passed and OTA is working again.
Unlocking / locking again works by the way also. Maybe this will help?
Click to expand...
Click to collapse
yes it does! was waiting for this. 2 quick questions:
- will lock/unlock require factory reset / data loss?
- where to get the (official?) boot.img from (am always careful to flash img from the wild)
thanks!
CoffeeMachineSwitch said:
yes it does! was waiting for this. 2 quick questions:
- will lock/unlock require factory reset / data loss?
- where to get the (official?) boot.img from (am always careful to flash img from the wild)
thanks!
Click to expand...
Click to collapse
Hello,
I'm glad to read that I could help.
I have "my" image of 'https :// mirrors.lolinet.com/firmware/moto/channel/official/RETEU/'. There are also some others - just have a look. And please remove the spaces around '://'. I'm currently not allowed to post (external) links, so this way.
* Every 'LOCK' deletes all data and the system is "clean" again.
* The same applies (unfortunately) to EVERY 'UNLOCK'.
I don't care at the moment because I haven't set up my smartphone yet. But it's not nice.
Best regards
Hey guys, I have a Pixel 3 XL that I am trying to repair because it's touchscreen doesn't work, however while doing the repair I found that it does not have the correct firmware and I cannot install the correct one. When in fastboot mode, it shows the product revision as "crosshatch MP1.0(ROW)" however when I go to recovery, at the top it says: "google/blueline/blueline" . I can only flash Pixel 3(blueline) firmware to it through adb sideload since the bootloader is locked. When I try to flash crosshatch firmware through adb sideload it makes it about 50% before failing due to inaccurate signature. Does anyone know how I can correctly return it's firmware to crosshatch. The touchscreen doesn't work due to I assume it having the wrong firmware. Any help is appreciated thanks .
Try unlocking bootloader first and clean up everything that is data and system and reboot back to bootloader and use flash-all script from the rim downloaded and let us know what happened.
lingarajug said:
Try unlocking bootloader first and clean up everything that is data and system and reboot back to bootloader and use flash-all script from the rim downloaded and let us know what happened.
Click to expand...
Click to collapse
Unfortunately I have no way to unlock the bootloader since the touchscreen doesn't work. I've been flashing through adb sideload as flash-all wasn't available to me due to the locked bootloader.
unifiedEthan said:
Unfortunately I have no way to unlock the bootloader since the touchscreen doesn't work. I've been flashing through adb sideload as flash-all wasn't available to me due to the locked bootloader.
Click to expand...
Click to collapse
Just a question why do you need a functioning digitizer to access or interact with the bootloader? Volume buttons are used to cycle through options and the power button confirms the highlighted option in both low level modes.
RagedElimanator said:
Just a question why do you need a functioning digitizer to access or interact with the bootloader? Volume buttons are used to cycle through options and the power button confirms the highlighted option in both low level modes.
Click to expand...
Click to collapse
Need to toggle it in dev options I think. I guess you could attach a pointer device?
wangdaning said:
Need to toggle it in dev options I think. I guess you could attach a pointer device?
Click to expand...
Click to collapse
Ah so you have access to the Android system locally, then if you could try attaching a mouse that should reverse the current situation you are in.
RagedElimanator said:
Ah so you have access to the Android system locally, then if you could try attaching a mouse that should reverse the current situation you are in.
Click to expand...
Click to collapse
I attached a mouse and was able to navigate around, however I am still not able to unlock the bootloader and the Pixel 3 OS crashes a lot on the Pixel 3 XL.
RagedElimanator said:
Ah so you have access to the Android system locally, then if you could try attaching a mouse that should reverse the current situation you are in.
Click to expand...
Click to collapse
I attached a mouse and was able to navigate around, however I am still not able to unlock the bootloader and the Pixel 3 OS crashes a lot on the Pixel 3 XL.
unifiedEthan said:
I attached a mouse and was able to navigate around, however I am still not able to unlock the bootloader and the Pixel 3 OS crashes a lot on the Pixel 3 XL.
Click to expand...
Click to collapse
Just out of curiosity where did you get this device?
RagedElimanator said:
Just out of curiosity where did you get this device?
Click to expand...
Click to collapse
I work at a tech repair site that buys phones and sells them online refurbished. I do software repair there and came across this phone while working there and it has me stumped. I think it might just be bad.
unifiedEthan said:
I work at a tech repair site that buys phones and sells them online refurbished. I do software repair there and came across this phone while working there and it has me stumped. I think it might just be bad.
Click to expand...
Click to collapse
Well if there is any chance you go flash the bootloader separately via fastboot try that. If that is successful then maybe the flash-all script could work
May be power off phone and hold volume down and connect to PC with cable and it should directly go to bootloader, make sure to download Google Android tools before hand and cmd to that folder and then u can unlock bootloader, let us know.
www.frpunlocked.com
Weird screen behavior, it seem to me that it isn't a hardware fault, cause when plugging in a charger the phone is able to show the MI logo, but not the charging icon
The phone is able to boot and i can hear the phone locking and unlocking, can see that the screen is on because of the backlight, but there is no image, SO FRUSTRATING!!
If you have any idea of what's going on and can give me a tip, i would thank you so much, the phone has been on this state for a long time
Don't know how to upload videos, if you think that can help diagnose it i can upload it and share a link or something
Hugask said:
Weird screen behavior, it seem to me that it isn't a hardware fault, cause when plugging in a charger the phone is able to show the MI logo, but not the charging icon
The phone is able to boot and i can hear the phone locking and unlocking, can see that the screen is on because of the backlight, but there is no image, SO FRUSTRATING!!
If you have any idea of what's going on and can give me a tip, i would thank you so much, the phone has been on this state for a long time
Don't know how to upload videos, if you think that can help diagnose it i can upload it and share a link or something
Click to expand...
Click to collapse
What did you do before?
Did you flash something?
Is it device unlocked?
This happen also in fastboot/recovery mode?
SubwayChamp said:
What did you do before?
Did you flash something?
Is it device unlocked?
This happen also in fastboot/recovery mode?
Click to expand...
Click to collapse
I hadnt updated my Rom, Pixel experience, in a while, so i took the opportunity and flashed an (at the time) beta Pixel Experience Android 10, i reverted and everything was fine for about one day i think, then some artifacting wich would come and go until the display gived up completly (about an hour between the two)
Yes, it is unlocked, and when in fastboot/recovery the screen is lighted up but not showing anything
My guess is that i have a low level firmware issue, as i had problem with those before (was running a custom ROM from day 1, so i had to manually update firware to use newer versions of PE (still pie version) and almost bricked my device
Hugask said:
I hadnt updated my Rom, Pixel experience, in a while, so i took the opportunity and flashed an (at the time) beta Pixel Experience Android 10, i reverted and everything was fine for about one day i think, then some artifacting wich would come and go until the display gived up completly (about an hour between the two)
Yes, it is unlocked, and when in fastboot/recovery the screen is lighted up but not showing anything
My guess is that i have a low level firmware issue, as i had problem with those before (was running a custom ROM from day 1, so i had to manually update firware to use newer versions of PE (still pie version) and almost bricked my device
Click to expand...
Click to collapse
Then try the next:
- Flash a different vendor.
- Flash a different kernel.
- Revert to stock ROM, no need to lock or nothing, just flash first the recovery ROM but if it doesn't result then flash the fastboot ROM through EDL, so that you know you can boot to EDL mode without need to open the back cover, this will restore all the original images.
SubwayChamp said:
Then try the next:
- Flash a different vendor.
- Flash a different kernel.
- Revert to stock ROM, no need to lock or nothing, just flash first the recovery ROM but if it doesn't result then flash the fastboot ROM through EDL, so that you know you can boot to EDL mode without need to open the back cover, this will restore all the original images.
Click to expand...
Click to collapse
Ok, so... i think i have all the files, but i'm really lost, how am i supposed to flash the vendor, firmware and stock ROM via fastboot?
Also, i put the device in fastboot, so... thats a win i guess (screen working surprisingtly)
I'm just not finding how to do this, it's been a while that i havent messed with this side of android, if you could help me it would mean the world for me
Hugask said:
Ok, so... i think i have all the files, but i'm really lost, how am i supposed to flash the vendor, firmware and stock ROM via fastboot?
Also, i put the device in fastboot, so... thats a win i guess (screen working surprisingtly)
I'm just not finding how to do this, it's been a while that i havent messed with this side of android, if you could help me it would mean the world for me
Click to expand...
Click to collapse
You can flash some images invoking the right partition, I mean, you can flash vendor image onto the vendor partition using
Code:
fastboot flash vendor vendor.img
, and in case you need to flash all the ROM you should use MiFlash tool
SubwayChamp said:
You can flash some images invoking the right partition, I mean, you can flash vendor image onto the vendor partition using
Code:
fastboot flash vendor vendor.img
, and in case you need to flash all the ROM you should use MiFlash tool
Click to expand...
Click to collapse
Ok, so... i am NOT keeping up with what i need to do, i found a vendor update in a site but it is not an image, i am so confused, i don't how was i able to mess around with this i am basically a noob, i feel so dumb, this should have been so easy and here i am having trouble
If you could make a step by step instruction or send a link where i can get a vendor .img it would be perfect thanks in advance
Hugask said:
Ok, so... i am NOT keeping up with what i need to do, i found a vendor update in a site but it is not an image, i am so confused, i don't how was i able to mess around with this i am basically a noob, i feel so dumb, this should have been so easy and here i am having trouble
If you could make a step by step instruction or send a link where i can get a vendor .img it would be perfect thanks in advance
Click to expand...
Click to collapse
Ok, update what is the current status of your device, you said screen now displaying, Did you refer only to fastboot mode? Could you see the bunny in fastboot? But booted up on system screen is displaying nothing?
SubwayChamp said:
Ok, update what is the current status of your device, you said screen now displaying, Did you refer only to fastboot mode? Could you see the bunny in fastboot? But booted up on system screen is displaying nothing?
Click to expand...
Click to collapse
Yes, that is correct, i can see the fastboot screen 100%, no artifacts, just plain working, still no recovery (if i remember right i have orange fox) or ROM screen
Hugask said:
Yes, that is correct, i can see the fastboot screen 100%, no artifacts, just plain working, still no recovery (if i remember right i have orange fox) or ROM screen
Click to expand...
Click to collapse
And what do you want to do now? Did you unlock bootloader?
SubwayChamp said:
And what do you want to do now? Did you unlock bootloader?
Click to expand...
Click to collapse
I actually want to check that, i took the phone to a tecnitician and he may have locked the bootloader
I think the next step would be flashing the vendor, firmwares and stock rom again, right?
Hugask said:
I actually want to check that, i took the phone to a tecnitician and he may have locked the bootloader
I think the next step would be flashing the vendor, firmwares and stock rom again, right?
Click to expand...
Click to collapse
if your bootloader is locked, you can't flash through fastboot mode either vendor or stock ROM, you should need to use EDL method or you can re-unlock bootloader and this way will work. Anyway i don't understand what actually your issue is.
SubwayChamp said:
if your bootloader is locked, you can't flash through fastboot mode either vendor or stock ROM, you should need to use EDL method or you can re-unlock bootloader and this way will work. Anyway i don't understand what actually your issue is.
Click to expand...
Click to collapse
The issue is the display not working, and it's gotta be a firmware issue as it's on my desk right now showing a bunny, also i am not used to fastboot flash anything, i just was used to recoveries and what not
Just runned some code and it's locked, this is getting better and better oh boy
How am i gonna unlock this if i can't even unlock the phone? last time with screen working it was already a nightmare, having to wait for miui account, do i have any method of doing this without using EDL?
Hugask said:
The issue is the display not working, and it's gotta be a firmware issue as it's on my desk right now showing a bunny, also i am not used to fastboot flash anything, i just was used to recoveries and what not
Just runned some code and it's locked, this is getting better and better oh boy
How am i gonna unlock this if i can't even unlock the phone? last time with screen working it was already a nightmare, having to wait for miui account, do i have any method of doing this without using EDL?
Click to expand...
Click to collapse
Well, this make sense although it's not clear if you did unlock it previously and after that at some time you did lock it again.
If you didn't unlock it previously you would need to bind your Mi account to the device and enable USB debugging and OEM unlock options but if you didn't before without a screen working you have a more difficult way, confirm me if that is the case.
Anyway I got happily surprised when I bought this device some months ago at the first attempt I could unlock it without have to wait time, try it and see what happen.
SubwayChamp said:
Well, this make sense although it's not clear if you did unlock it previously and after that at some time you did lock it again.
If you didn't unlock it previously you would need to bind your Mi account to the device and enable USB debugging and OEM unlock options but if you didn't before without a screen working you have a more difficult way, confirm me if that is the case.
Anyway I got happily surprised when I bought this device some months ago at the first attempt I could unlock it without have to wait time, try it and see what happen.
Click to expand...
Click to collapse
It was unloked and i locked again, don't know if this helps my case or if i am royally screwed up
And yeah, Xioami does make difficult to do the process of unlocking but only to recently released devices, aparently to stop re-sellers to buy the cheaper chinese rom and put the global version on them, i think that when a device doenst get made anymore makes sense that they would make it more easy (i bought the device 2 weeks after launch)
Hugask said:
It was unloked and i locked again, don't know if this helps my case or if i am royally screwed up
And yeah, Xioami does make difficult to do the process of unlocking but only to recently released devices, aparently to stop re-sellers to buy the cheaper chinese rom and put the global version on them, i think that when a device doenst get made anymore makes sense that they would make it more easy (i bought the device 2 weeks after launch)
Click to expand...
Click to collapse
Ok, of course this makes a huge difference, if you did unlock it previously then you couldn't receive any wait time, I wonder why you didn't try it if you didn 't. Check if MiUnlock tool unlock your device instantly.
SubwayChamp said:
Ok, of course this makes a huge difference, if you did unlock it previously then you couldn't receive any wait time, I wonder why you didn't try it if you didn 't. Check if MiUnlock tool unlock your device instantly.
Click to expand...
Click to collapse
OMG THIS WORKED
It's been sucessfully unlocked
Hugask said:
OMG THIS WORKED
It's been sucessfully unlocked
Click to expand...
Click to collapse
Hmm, OK, now you have your way sorted out, you can try with a custom ROM (all of them contain a vendor) or in case a custom ROM doesn't solve it you have to try a stock ROM through Mi Flash tool.
SubwayChamp said:
Hmm, OK, now you have your way sorted out, you can try with a custom ROM (all of them contain a vendor) or in case a custom ROM doesn't solve it you have to try a stock ROM through Mi Flash tool.
Click to expand...
Click to collapse
Ok, but how am i gonna flash a rom with fastboot? Is that a thing?
Also, i don't think the vendor is gonna be my only problem, but also the firmware, is there a way to flash firmware without the recovery and trough fastboot?
Hugask said:
Ok, but how am i gonna flash a rom with fastboot? Is that a thing?
Also, i don't think the vendor is gonna be my only problem, but also the firmware, is there a way to flash firmware without the recovery and trough fastboot?
Click to expand...
Click to collapse
You can't be sure of that, sometimes the vendor correct the issue, sometimes the firmware.
Firmware it is in the stock ROM that can be flashed either through fastboot or EDL mode (be careful to not relock bootloader or you couldn't enable this time OEM unlock option). Now that you have the way more clear just do a search "how to flash stock ROM on Xiaomi devices either through fastboot or EDL mode", just keep in mind that you don't need to open the back cover of the device, usually from a device off (only on unlocked ones) you could send it to EDL by pressing both volume buttons at same time that it is connected to PC, I gave you the main tips, for the rest you will find a lot of tutorials.
I tried downgrading my Moto G30 from Android 12 to Android 11 using an available stock ROM I found on the internet. At first, I faced some problems and a soft brick, but finally, I was able to flash and boot it correctly. Then, knowing that the ROM flashed was "stock," I decided to relock the bootloader, which was a mistake. After rebooting, I got the message "No valid operating system could be found. The device will not boot."
I spent the whole day trying to figure out how to get it working again. The main problem here is that I relocked the bootloader and can't get to the OS again to enable the option in developer settings to re-unlock it and flash another ROM. I tried using RSA (LMSA) to restore it, but it refuses, and I think it gets the same error that won't let me flash anything to the phone.
During my research, I found that one possible solution is to boot in EDL mode and flash everything again, but I don't want to open my phone and do weird things to get into that mode. Hopefully, there's another solution or another way to get into EDL.
If you have any information that could help me solve this, please comment.
I had the same problem with mine. The thing is, i tried to flash a blank-flash image but it wont go. I think its to early to downgrade your Moto G30, but you can try to flash the stock image in EDL Mode by opening your Motorola. Also you might need to send it to Motorola. Sorry
In the image you have the EDL Test Point you must brick.
But also you can try
fastboot reboot edl
Click to expand...
Click to collapse
or
reboot edl
Click to expand...
Click to collapse
U_ShowcaseDev said:
But also you can try
or
Click to expand...
Click to collapse
I've already tried several combinations of that command with no success.
aldoo9 said:
I've already tried several combinations of that command with no success.
Click to expand...
Click to collapse
Sorry I think your Motorola is Dead.
U_ShowcaseDev said:
I had the same problem with mine. The thing is, i tried to flash a blank-flash image but it wont go. I think its to early to downgrade your Moto G30, but you can try to flash the stock image in EDL Mode by opening your Motorola. Also you might need to send it to Motorola. Sorry
In the image you have the EDL Test Point you must brick.
Click to expand...
Click to collapse
Hello again! Do you know how to flash the stock rom in EDL mode? I've found some tutorials but the files required are not available in the stock rom files to do so.
aldoo9 said:
Hello again! Do you know how to flash the stock rom in EDL mode? I've found some tutorials but the files required are not available in the stock rom files to do so.
Click to expand...
Click to collapse
Please send me a Link.
aldoo9 said:
Hello again! Do you know how to flash the stock rom in EDL mode? I've found some tutorials but the files required are not available in the stock rom files to do so.
Click to expand...
Click to collapse
Don't you need to just blankflash it in EDL?
And yes you most likely need to open it.
For the Blankflash you need to download Lenovo Rescue and Smart Assistant (since lenovo produces moto phones). What this does it installs the correct drivers for your phone.
And the files can be found here : https://mirrors.lolinet.com/firmware/motorola/caprip/blankflash/
Good luck and as always, do your own research!
Edit: https://forum.xda-developers.com/t/hard-brick-moto-g30.4397117/page-2 this thread has more info.
KAN7A said:
Don't you need to just blankflash it in EDL?
And yes you most likely need to open it.
For the Blankflash you need to download Lenovo Rescue and Smart Assistant (since lenovo produces moto phones). What this does it installs the correct drivers for your phone.
And the files can be found here : https://mirrors.lolinet.com/firmware/motorola/caprip/blankflash/
Good luck and as always, do your own research!
Edit: https://forum.xda-developers.com/t/hard-brick-moto-g30.4397117/page-2 this thread has more info.
Click to expand...
Click to collapse
I tried one, but it doesn't work. The Bootloader keeps locked.
U_ShowcaseDev said:
I tried one, but it doesn't work. The Bootloader keeps locked.
Click to expand...
Click to collapse
Isn't the point to flash the stock ROM, not to unlock the bootloader?
Yes, you right. But how???
KAN7A said:
Isn't the point to flash the stock ROM, not to unlock the bootloader?
Click to expand...
Click to collapse
I saw, that you can flash a .xml Stock Firmware FIle. But i dont find anyone that work...
U_ShowcaseDev said:
I saw, that you can flash a .xml Stock Firmware FIle. But i dont find anyone that work...
Click to expand...
Click to collapse
I think you can flash with Lenovo Rescue and Smart Assistant or manually, the XML is to flash automatically, you can flash manually each image.
If you cant maybe there is an error along the way.
I might look into this later. I would lock my bootloader to test but i dont have a backup.
KAN7A said:
I think you can flash with Lenovo Rescue and Smart Assistant or manually, the XML is to flash automatically, you can flash manually each image.
If you cant maybe there is an error along the way.
I might look into this later. I would lock my bootloader to test but i dont have a backup.
Click to expand...
Click to collapse
That can be the end to your phone. But, if you have a test phone that would be excellent.
KAN7A said:
I think you can flash with Lenovo Rescue and Smart Assistant or manually, the XML is to flash automatically, you can flash manually each image.
If you cant maybe there is an error along the way.
I might look into this later. I would lock my bootloader to test but i dont have a backup.
Click to expand...
Click to collapse
Lenove RSA doesn't work. I tried it. When the Bootloader is unlocked it work. When the Bootloader is locked it wont work.
U_ShowcaseDev said:
Lenove RSA doesn't work. I tried it. When the Bootloader is unlocked it work. When the Bootloader is locked it wont work.
Click to expand...
Click to collapse
I dont have a test device right now so i cant test myself, anything I say might be wrong.
This might be a complete brick because of the downgrade from what I've read.
There is little info on the forum about this issue so I don't want to make wrong suggestions until i can test.
Yes, unfortunately, there is still little information about the Moto G30. But I hope that there will be more information and solutions in the future.
U_ShowcaseDev said:
Yes, unfortunately, there is still little information about the Moto G30. But I hope that there will be more information and solutions in the future.
Click to expand...
Click to collapse
Maybe you can help me with some info i am interested in.
1.You have booted into EDL using Short Pin method
2.You have used blankflash successfully
3.Then you try to flash manually and got Permission Denied?
For both Android 11 Stock ROM and Android 12 Stock Rom?
EDIT: Is the back of the phone glued? Or just clamps so you can put it back with no glue?
Since i want to test this soon hopefully.
KAN7A said:
Maybe you can help me with some info i am interested in.
1.You have booted into EDL using Short Pin method
2.You have used blankflash successfully
3.Then you try to flash manually and got Permission Denied?
For both Android 11 Stock ROM and Android 12 Stock Rom?
EDIT: Is the back of the phone glued? Or just clamps so you can put it back with no glue?
Since i want to test this soon hopefully.
Click to expand...
Click to collapse
1. Yes
2. I used a blankflash successfully.
3. Then in fastboot tried to flash the android 11 stock and after it failed the android 12 stock image. Also i tried the RSA varient. Both will not work.
The back is clicked in place. There are two stickers on the phone. Two white ones, One on the top left corner and one on the bottom of the phone.
But careful when you open the back. The screws are well screwed and the cap over the motherboard is slightly stuck. Maybe this will help you: Dissasembly Moto G30 YouTube
@U_ShowcaseDev Thank you so much! This is exactly what i wanted to know!