Unbrick Realme X2 [HELP] - Realme X2 Questions & Answers

I was flashing back to stock and I had flashed using TWRP (Smart Depot NG , back to stock video had told to use this twrp ) and flashed the ozip file which it "decrypted" (Pretty fast) and flashed. The phone booted into 9008 mode (EDL) anymethod to get it back? Will I have to give it to Realme Service? Any ideas are welcome.

Related

Root, TWRP install, reboot in recovery and paper holder phone!

Hi all,
since 3 days i faced some problems with my D855 stock lollipop (21A) ROM, I tried SUPER-SUME to escape kingroot,but it fails to install SUPER-SU and i lost my root access, GPLAY was very low speed in downloading and installing app; i was rooted (via Kingroot) and TWRP installed.
Yesterday evening i try to recover the situation via normal flash mode the original 21A rom.
It work so i root it again and install TWRP via AREC app.
This morning i try to reboot in recovery, the phone switch off and ..... nothing, it's dead, no way to boot it either in normal, or recovery or download mode.
Is there anything i can do before send it to service or it's unusefull?
davcbr said:
Hi all,
since 3 days i faced some problems with my D855 stock lollipop (21A) ROM, I tried SUPER-SUME to escape kingroot,but it fails to install SUPER-SU and i lost my root access, GPLAY was very low speed in downloading and installing app; i was rooted (via Kingroot) and TWRP installed.
Yesterday evening i try to recover the situation via normal flash mode the original 21A rom.
It work so i root it again and install TWRP via AREC app.
This morning i try to reboot in recovery, the phone switch off and ..... nothing, it's dead, no way to boot it either in normal, or recovery or download mode.
Is there anything i can do before send it to service or it's unusefull?
Click to expand...
Click to collapse
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
You can try this, didn't work for me because I was stupid and short circuited something wrong. But send ir to warranty and they gave me a new one. So no problems.
Phone in service,but just for my info i read a procedure to unbrick the phone stucked on Qualcomm 9008 error..... how can i find if it is the 9008 one?
Yesterday my phone did that and I flashed the KDZ as if the phone was on, up+USB until I heard the sound on the pc, ran the flash tool and it worked.
hi plz anyonehelp me i have g3 d85510i Kvt49L GLOBAL.COM made Korea want to back stock bcoz recovery not work got error fastboot mood im on 4.4.2
anyone help me plz thanku

oppo find 7a encryption unsuccessfull..!!PLZ hlp..!!TIA..

hello ..i am a new junior member..i need help form experts..i have a oppo find 7a..and i root it and install twrp 3.0..after that i flash ressurection rom from xda forum for find 7a...so after few days i want to go back to stock Rom..but after i flash the stock rom its not booted up..its only shows the oppo logo and shows encryption unsuccsessful..and reset ..but after pressing reset its stuck at the oppo logo ..now i cant go in recovery mode there are no recovery mode..i use twrp img file but after flashing the twrp my pc shows its completed but nothing happens i tried a lot..and then i give the phone to service center..after 1 day they told me they cant install the rom..its a main borad problem..i have to change the mainboard of my phone and its cost around 180 dollar or 12000 indian rupee..so anybody have solution for this??? help plz..:crying::crying::crying::crying:
I think oppo says on their website that you need to reflash their bootloader. You'll need to hop into fastboot and reset it to theirs.\
Google "Reverting to Stable ColorOS on your ColorOS 2.0 Find 7" and its like the first link in google. I can't post links yet

HELP For Bricked E986

Hi to all. Any help will be appreciated.
1) I've flashed this rom on my e986: https://forum.xda-developers.com/optimus-g-pro/development/mar-0-lollipop-g-pro-v1-t3043779
2) to flash this rom, of course flashed its zero fix recovery file: Zero_Misc_fix_factory_data_reset_recovery.zip and its recovery: MODDED-Philz Touch 6.48.4 --[F24x,E98x,F2x]---
3) My phone booted up and runs with this ROM
4) After a few hours, it has lost the operator signal. So i want to go back to my backed up stock ROM.
5) I've flashed twrp (TWRP-2.6.1.0-E980-LOKIFIED for e98x variants) then flashed my backup.
6) At first, everything is normal and i can use my phone but then, when i want to enter recovery, the phone stucked on LG logo.
Now i can't enter recovery, i can't boot my phone... It just enters the download mode but LG Mobile support tool doesn't recognize my phone (of course drivers installed and i can see it on device manager as LG AndroidNet USB Modem) and LG flash tool 2014 says "please check IMEIor S/W file status in CSMG. Here is screenshot: https://1drv.ms/i/s!Ag2Ng6eCd50BigdR8pqI6eTPOGx7
Any idea how to unbrick my phone?
OK. Don't bother with this topic.
With a few days work on, my device is up again with using LG Flash Tool 2014.

Moto Z2 Force Sprint bricked *Please help*

Hi all! I ask your help! I have Moto z2 Force on 8.0 Oreo and I installed custom recovery twrp-3.2.1-1-nash.img and foolishly chose Slot-B and then I reboot the phone. Now when connected to a computer, it is defined as Qualcomm HS-USB QDLoader 9008 . How can I bring it back to life?! Help please! :crying:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
yakutza said:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
Click to expand...
Click to collapse
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
PoisonDash2 said:
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
Click to expand...
Click to collapse
This happened to me on t-mobile yesterday and I managed to solve it by downloading this: (T-Mobile only) https://drive.google.com/file/d/1fM5KLheeMYcs3yF7InOzHq6yGCOmrrbk/view
Extract the zip and while your phone is connected to your pc and booted in bootloader mode, run flash_all.bat, boot (don't flash) TWRP, install TWRP with the TWRP zip found here: https://dl.twrp.me/nash/twrp-installer-nash-3.2.1-1.zip.html
Then reboot to your newly installed TWRP recovery, factory reset, flash rom, reboot bootloader and run "fastboot -w".
After that you should boot up fine. Fastboot -w might not be necessary but I had to do it, otherwise I would boot but I would get an error message "android.process.media has stopped" without it.
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Will71000 said:
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Click to expand...
Click to collapse
If its get detect as QHUSB_BULK in conputer and installing Qualcomm drivers get it to Qh_usbloader 9008 under COMports then theres no way ti revive ur phone. Theres no Blank Flash files yet available for Moto Z2 Play

Best stock to flash via qpst

I don't flash any stock rom since Q3 2016 and now i need newer base to flash latest customs. What is best stock rom that i can flash via QPST? I mean which one is most actually (i know there is oreo but it's hard to find no modded version)
Deep flash cable
I needed to make a deep flash cable. It was impossible to get into EDL. I had installed stock ROM while the drive was encrypted and the new install was installed in it just fine, but the pattern was only a piece you needed to decrypt. The rest was in the OS I wiped. So I had to use the cable to get into edl.
Instead of EDL flash cable use this trick
Connect your phone to your PC in EDL mode:
Youtube Video: v=DexLELi04XY
Title: EDL MODE Lenovo Z2 | Lenovo z2132
(sorry, can't post link)

Categories

Resources